floor leveling in tiling

8/9/2019 Floor Leveling in Tiling

1/6

Advance to the n

ARDEX loor levellingand more importantly giv


2/6

ARDEXA 45Rapid Hardenand DryingInternal RepaMortar

ARDEX A 45internal repairisers and othrepairs. Hard on and receiv90 minutes. Oinclude; orm

alls, makingttings/pipew

and joints, etc

Features Rapid hard

drying reca ter 90 mi

Slump- ree

or verticalhorizontal r Rapid repa

concrete suconcrete sta

Fills holes acracks in rescreeds etc.

Rapidry Fo

ARDITEX

Latex-basedUniversal Sub-foorSmoothingCompound

ARDITEX is a smoothinglatex screed with excellentproperties o adhesion,fexibility and water resistance.ARDITEX is ideal or smoothingtimber foors.

Features Excellent adhesion to

almost all substrates,including timber

Una ected by moisture,

can be used under a dampproo membrane Simply mixed, pre-gauged

two part pack

ARDEXA 55Rapid DryingLevelling andSmoothingCompound

ARDEX A 55 is an advancedsel -levelling sub-foorsmoothing compound withrapid hardening and rapiddrying properties. ARDEX A 55can receive tiles in only 90minutes making it ideal orareas where speed is essential

or rapid renovation and repair.

Features Ultra rapid drying thin or

thick applications receive tilesa ter only 90 minutes

Ideal or rapid smoothing,

patch repairs and renovations Sel -smoothing For use with

under foor heating Rapidry Formula Superior fow

ARDEXLQ 92Cement BasedLevelling Compound

ARDEX LQ 92 is a cement basedunderlay or levelling uneven concretefoors prior to tiling. When mixed withwater, ARDEX LQ 92 provides a s mooth,pourable, ree fowing and sel smoothingmaterial that can be applied to a thicknesso 25mm down to a eather edge.

Use Undertile levelling compound designed to be compatible

with ARDEX tile and stone adhesives For internal and external situations

For balconys with negative alls and ponded situations Use as a screed or ramping (re er to technical datasheetor more in ormation)

Features Sel smoothing Polymer modi ed apply rom eather edge to 10mm Early walkability tile over a ter approx 4 hours Suitable or use with under foor heating


3/6

Step 3 ApplicationPour the mixed mortar onto the preparedsub-foor, adding resh into resh. Spread witha gauging rake and smooth with an ARDEXsmoothing trowel be ore allowing to dry.

Step 1 PreparationEnsure the loor is solid, thoroughly clean and reeo oil, wax, grease and other sur ace contaminants.ARDEX recommends to mechanically clean the loorbe ore priming with appropriate primer.

ARDEX MultiprimeWater-based primer or improvingadhesion o ARDEX productsto various porous substrates.

ARDEX P 51Primer and bonding agent or useon porous substrates to improveadhesion o ARDEX sub-foor smoothingcompounds. Helps prevent air bubbles,pin holes and prolong the fow li e.

ARDEX P 82Solvent ree, non-fammable,two part, water dispersed epoxyprimer or use on all denseimpervious sur aces.

ARDEX E 25/AbalasticAdditives to impart fexibility,improve adhesion and strengtho ARDEX foor levelling products.

Preparing foors

or tile nishes


4/6

Existingtimberoor

PrimerARDEX MultiprARDEX P 82

Ficeun

e.g.

ARDEX Flo

Dry internal concrete foor withunderfoor heating cables in topping.Dry internal concrete foor.

Existingconcreteoor

PrimerARDEX MultiprimeARDEX P 51

Tile AdhesiveAbaexARDEX STS 8ARDEX X 56

Levelling CompoundARDEX LQ 92ARDEX A 55

GroutARDEX FG 8

e.g. e.g. e.g.

Existingconcreteoor

PrimerARDEX MultiprimeARDEX P 51

Tile AdhesiveAbaexARDEX X 56

Levelling CompoundARDEX LQ 92 withAbalasticARDEX A 55

GroutARDEX FG 8 withGrout Booster

HeatingCables

e.g. e.g. e.g.

* ARDEX recommend risk o cracks rom ti

Dry intern


5/6

Trowel a per ect adhesive bedeach time, without the need to buildup the adhesive in problem areas.

Easier installation

Saves you time

Cost e ective

A per ectinish every time

Less e ort compared to laying traditionalsand:cement screeds, plus much moreversatile with the ability to go rom a eatheredge to 30mm.

Unique ARDEX Rapidry Formulatechnology, which locks the mixwater inside the levelling compound,means you can have a per ect sur ace

or tiling in as little as 90 minutes.

Removes any unevenness in the loor thatcould show through to the inished sur ace,which is especially important with large

ormat or polished tiles.


6/6

Product properties ARDEX Product Applica tion

thickness neat Applicationthickness withaggregate

Materialrequirementkg/m/mm

Ready or tiling Unit size Internal/External Suitable orunderfoor heating

ARDEX LQ 92 Feather edgeto 10mm

10 - 25mm 3.8m at 3mm thick 4 hours 20kg Both Yes with Abalastic

ARDEX A 55 Feather edgeto any depth

10mm + 5.6m at 3mm thick 90 minutes 25kg Dry internal Yes (Consult ARDEXtechincal services)

ARDITEX Feather edgeto 12mm

8 - 30mm 4.2m at 3mm thick 4-6 hours(2-4 hours aspatch repair)

24.4kg Internal(Consult ARDEXtechnical services

or external)

Yes

ARDEX A 45 0 - 30mm 5 - 50mm* 4m at 3mm thick 90 minutes 20kg Dry internal Yes with ARDEX E 25

ARDEX A 46 2 - 30mm 5.3m at 3mm thick 4-6 hours 25kg Both Yes

* 5 - 30mm ne aggregate can be incorporated30 - 50mm coarse aggregate can be incorporated

ARDEX o ers ree technical advice on the application o foor levellers prior to tiling, contact our pro essionaltechnical advice team TOLL FREE on 1800 224 070. For other in ormation contact your local ARDEX Sales O ce.

ARDEX also o er product training, speak to your local ARDEX Sales Representative or local ARDEX stockist.

floor leveling in tiling

Documents