FLIR K-Series

Infrared Basics

Thermal, or infrared energy, is light that is not visible because its wavelength is too long to be detected by the human eye.

Infrared thermography cameras produce images of invisible infrared or "heat" radiation and provide precise non-contact temperature measurement capabilities.

IR Cameras

Infrared Energy DetectionAn infrared camera is a non-contact device that detects infrared energy (heat) and converts it into an electronic signal, which is then processed to produce a thermal image on a video monitor and perform temperature calculations.

The new FLIR K-Series

•K40: 240 x 180 pixels•K50: 320 x 240 pixels

Main Specifications• Image resolution: 240x180 or 320x240 pixels• Detector: uncooled VOx micro bolometer, image frequency of 60Hz• 4 inch LCD display. • Operating temp. range: -20°C to +85°C / +260°C for 5 minutes• Object temperature range: -20°C to +650°C (auto range)• Li-Ion Batteries: 4 hours of operating time • Start-up time: <25 seconds• Start-up time from sleep mode: <4 seconds• Interface: USB Mini-B for Data transfer • Weight: 1.1 kg

Key Features• Hi resolution detector• Full frame rate• Ease of use, also with gloves on• Robust design• Crisp & clear image. Bright 4” display• 5 different operating modes• Control and setup software• Warranty: 2 years on camera + 10 years on detector

Extremely affordable: a thermal imaging camera in every fire fighting truck.FLIR markets more thermal imaging cameras than any other manufacturer. Thanks to economies of scale FLIR Systems can market the FLIR K-Series at an extremely affordable price.

Robust & reliableThe K-series is designed to meet tough operating conditions. It withstands a drop from 2 meters on a concrete floor, is water resistant (IP67) and fully operating up to +85 °C.

Clear and crisp thermal imagesThe maintenance free uncooled microbolometer sensor produces clear and detail rich images of 240 x 180 pixels (FLIR K40) or 320 x 240 pixels (FLIR K50). Thermal images are presented on a large bright 4” display helping you navigate and make quick and accurate decisions.

Easy-to-use, also for a gloved fire fighters handAn intuitive and simple user interface allows you to focus on the job at hand. The FLIR K-Series can be controlled by 3 large buttons on top of the unit. Ideal for a gloved fire fighters hand.

Produce simple reportsThermal images can be stored in the FLIR K-Series and later be used to produce simple reports of what happened at the scene.

WHY FLIR K-SERIES?

Box Contents

• FLIR K-Series Thermal Camera• Battery (2x)• Power supply• Battery charger• Hard case• Retractable lanyard• Strap lanyard• Neck strap• Tripod adapter• User manual (CD)

Optional Truck Mount/Charger

Additional charging bay

Easy-to-use Design

Power Button

Zoom Mode Select

5 Available Video Modes

Palette 1: NFPA Mode (default)• Auto Range

• Colorization 150 – 650 C° • NFPA Standard User Interface

(Basic Thermal Imager)

• Multipurpose Mode. For initial fire attack with life rescuing operation and controlling of Fire.

Palette 2: Black & White Mode• Auto Range

• No Colorization

• Digital readout

• Similar purpose as NFPA Standard User Interface, but without colorization.

Palette 3: Fire Mode• Auto Range 0-650 C°

• Colorized

• For use in context with higher temperatures. For example structural fires. Where there is already a lot of open flames and a high background temperature.

Palette 4: Search & Rescue Mode • High Sensitivity 100-150 C°

(200-300 F°)

• Colorized

• For use in context with lower temperature. For example initial search and rescue operations. Search for people in landscapes. Traffic accidents etc.

Palette 5: Heat Detection Mode• High Sensitivity 100-150 C°

• A gray scale palette with colorization of 2% of the hottest areas of the view.

• Used for searching hotspots.

Front Side: Trigger• Short press: takes an image and saves

image to memory.• Long press: Freezes the taken image, as

long as the trigger is pressed.

Trigger

Thank you!