flextronics - reliable controls a4.pdf · system installed at flextronics monitors and controls the...

1
© 2011 Reliable Controls Corporation . 120 Hallowell Road, Victoria, BC, Canada, V9A 7K2 Toll Free 1-877-475-9301 . Tel 1-250-475-2036 . Fax 1-250-475-2096 Project Profile Flextronics S ingaPore i nduStrial Headquartered in Singapore, Flextronics is a leading Electronics Manufacturing Services (EMS) provider for blue-chip OEMs. The Flextronics building at 2 Changi South Lane consists of warehouse facilities, assembly, and clean room facilities while also housing the offices of Flextronics Logistic and Flextronics Technology. VACE Pte Ltd, a Reliable Controls ® Authorized Dealer in Singapore, was contracted to migrate the existing BAS to an open and efficient system, instead of upgrading a competitor’s existing proprietary system. The MACH- System installed at Flextronics monitors and controls the central chilled water plant which consists of 3 air-cooled chillers, 2 water-cooled chillers, 5 chilled water pumps, 2 condenser pumps, and 5 cooling towers. The central chilled water system runs 24/7 and supplies chilled water to the office area, warehouse area, production and assembly line, and clean room facilities. Offices and warehouse are constantly cooled by fan coils units and air handling units. MACH-Zone and MACH-Stat controllers were deployed to control the mechanical equipment. The facility’s legacy BAS system monitored I/Os that were not essential to the customer’s operation requirements. During the installation of the MACH-System, the unnecessary points were omitted with the result being better control of room temperature in the general office area. As well, where constant setpoints had previously resulted in over cooling, outside air temperature was used to reset the room temperature setpoint. www.reliablecontrols.com Project Details assembling control Project tyPe: New Construction & Retrofit installation tyPe: Chiller, Fan Coil Unit, HVAC total area: 26,300 m 2 (283,090 ft 2 ) equiPment installed: 3 MACH-ProSys 4 MACH-ProCom 9 MACH1 10 MACH-ProPoint 25 MACH-Zone 31 MACH-Stat network: EIA-485, Ethernet, Wireless integration: Modbus total system Points: 718 points reliable controls ® dealer: VACE Pte Ltd To learn more about projects using Reliable Controls ® visit www.reliablecontrols.com/projects/overview

Upload: lycong

Post on 18-Mar-2018

230 views

Category:

Documents


4 download

TRANSCRIPT

© 2011 Reliable Controls Corporation . 120 Hallowell Road, Victoria, BC, Canada, V9A 7K2 Toll Free 1-877-475-9301 . Tel 1-250-475-2036 . Fax 1-250-475-2096

Project Profile

Flextronics

SingaPore induStrial

Headquartered in Singapore, Flextronics is a leading Electronics

Manufacturing Services (EMS) provider for blue-chip OEMs. The

Flextronics building at 2 Changi South Lane consists of warehouse

facilities, assembly, and clean room facilities while also housing

the offices of Flextronics Logistic and Flextronics Technology.

VACE Pte Ltd, a Reliable Controls® Authorized Dealer in

Singapore, was contracted to migrate the existing BAS

to an open and efficient system, instead of upgrading

a competitor’s existing proprietary system. The MACH-

System installed at Flextronics monitors and controls the

central chilled water plant which consists of 3 air-cooled

chillers, 2 water-cooled chillers, 5 chilled water pumps,

2 condenser pumps, and 5 cooling towers. The central

chilled water system runs 24/7 and supplies chilled

water to the office area, warehouse area, production

and assembly line, and clean room facilities. Offices and

warehouse are constantly cooled by fan coils units and

air handling units.

MACH-Zone™ and MACH-Stat™ controllers were deployed

to control the mechanical equipment. The facility’s legacy

BAS system monitored I/Os that were not essential

to the customer’s operation requirements. During the

installation of the MACH-System, the unnecessary

points were omitted with the result being better control

of room temperature in the general office area. As well,

where constant setpoints had previously resulted in over

cooling, outside air temperature was used to reset the

room temperature setpoint.

www.reliablecontrols.com

Project Details

assembling control

Project tyPe:New Construction & Retrofit

installation tyPe:Chiller, Fan Coil Unit, HVAC

total area:26,300 m2 (283,090 ft2)

equiPment installed:3 MACH-ProSys™

4 MACH-ProCom™

9 MACH1™

10 MACH-ProPoint™

25 MACH-Zone™

31 MACH-Stat™

network:EIA-485, Ethernet, Wireless

integration:Modbus

total system Points:718 points

reliable controls® dealer:VACE Pte Ltd

To learn more about projects using Reliable Controls® visitwww.reliablecontrols.com/projects/overview