flat solar collector - megasunmegasun.asia/v2/...flat-solar-water-heater-2019.pdf · solar...
TRANSCRIPT
www.megasun.com.vn
High e�ciencyElegent design Enviromental friendly
FLAT SOLAR COLLECTOR
02
FLAT SOLAR COLLECTOR
Maximum outputSolar thermal collectors use energy from the sun to generate heat for heating and hot water. This energy is free, environmentally friendly and reliable. The heart of flat-plate, air and evacuated-tube collectors is the absorber. It collects the energy in sunlight and converts it into heat. The more efficient the absorber, the greater the collector‘s output.
The absorber of Megasun flat collector is imported from Germany with its TiNOX absorbers: these products absorb 95% of incident sunlight. At the same time, depending on the absorber, they only lose around 4% through heat radiation. In this way, manufacturers of collectors can ensure the highest quality and maximum yield for their customers. Its highly selective absorber layers both to aluminium and copper substrates. Meg-asun flat collector therefore able to offer a wide range of high-quality products with TiNOX absorbers. TiNOX is characterised by outstanding absorption and emissivity rates. The highly selective blue coating guar-antees the customer the best possible collector performance.TiNOX has a highly selective, environmentally friendly coating, and with its reduced absorption rate is designed especially for regions with very high levels of sunlight. TiNOX comes in a wide range of colours and is therefore perfect for customers who wish to match it aestheti-cally with their building, especially, for example, in Mediterranean countries.TiNOX products are made in Germany in modern production lines in Bernburg.
THE
RM
AL
EM
ISS
IVIT
Y
SOLAR RADIATION
SOLAR ABSORPTION TiNOX energy
THERMAL EMISSIVITY TiNOX energy AT 100 °C
THERMAL EMISSIVITY OF A BLACK ABSORBER AT 100 °C REFLECTION TiNOX energy
RE
FLE
CTA
NC
E
WAVELENGTH [µm]
0,3 1 10 500,0
0,2
0,4
0,6
0,8
1,0
2,51,0
0,8
0,6
0,4
0,2
0,0
SOLAR ABSORBER COATINGS OF MEGASUN FLAT COLLECTORS
Absorber of Megasun Flat Collector in CoilImported from Germany
HEAT ENERGY
TiNOX
METAL TAPE
HEAT RADIATION 4%
REFLECTION 5%
90 %
100 %
TiNOX energy
is the premium product in the TiNOX product range: with its outstanding absorption and emissivity perfor-mance, the highly selective, blue absorber is the first choice for collector manufacturers who wish to guarantee their customers the highest output even when less sunlight is available.
is capable of absorbing 95% of incident solar radia-tion and converting it into heat. like an "energy trap," the highly selective blue TiNOX coating only loses approx. 4% of the captured solar energy as heat radiation.
TiNOX absorbers consist of a number of layers, carefully designed to work together. The substrate material is a highly infrared-reflective metal sheet that conducts heat well. A diffusion barrier is applied to the adhe-sive layer. This prevents metal atoms from entering the absorber layer at high temperatures and changing the optical properties. This is followed by the absorber layer consisting of a multilayer cermet structure. Final-ly, the top layer is an anti-reflective, protective layer made of fused quartz. This material is extremely hard and also scratch-resistant. The absorber is therefore very well protected from damage during handling. By minimising surface reflection, the absorption of solar radiation is further optimised.
All TiNOX absorbers are available with both copper and aluminium substrates. Both substrate materials have excellent thermal conductivity properties.
Solar absorption: α ~ 95 % Thermal emissivity: ε ~ 4 %
PROTECTIVE AND ANTIREFLECTION LAYER
ABSORBER LAYER
BONDING LAYER
COPPER SUBSTRATE
PROTECTIVE AND ANTIREFLECTION LAYER
ABSORBER LAYER
BONDING LAYER
INFRARED-REFLECTIVE LAYER
ALUMINIUM SUBSTRATE
FLAT SOLAR COLLECTOR
03
The structure of Megasun absorber fin
HEAT TRANSFER TECHNOLOGYHeat transfer technology through the collector in cloudy weather it can still absorb heat, it can work smoothly under the temperature of 60 degree, independent heat transfer pipe design without the water it also can resist over 230 degree, making the collector last for over 15 years or even more. The features of high pressure resistance, incorruptible and use indirect heat transfer system, frost resisting, no scaling
INTENSIVE COLLECTOR COREHigh selective blue coating made in Germany is designed with copper and aluminium material. It can absorb over 95% sunlight, low than 5% reflec-tion. Copper has higher feature of the heat trans-fer; increase the entire board thermal conductivi-ty of laser welding design, the efficiency can improve 5%
INTENSIVE TEMPERED GLASS COVERLow-iron crease tempered glass and black anti-reflection golden tempered glass is high transmittance, high intensive and impact resis-tance and can carried 700kg; black anti-reflec-tion golden tempered glass is good shaped and with high value
DOUBLE INSULATION DESIGNThe bottom of the collector core can resist high temperature and reflection, reducing energy loss when transferring, the whole foam of polyure-thane insulation can improve the collector’s intensive and efficiency of insulation, decrease the thickness
FLAT SOLAR COLLECTOR
04
FLAT SOLAR COLLECTOR
3
5
2
6
4 1
FLAT PLATE SOLARCOLLECTOR
COMPOSITION
3
5
2
6
Special bending design extrusion aluminium frame (Cov-entional 45° combined frame optional)
Package laser welding absorber allows 360° heat transfer
Embossed aluminium & zinc
Copper riser tube and header tube, with high efficiency
Full aluminium foil packed high density fiber glass insula-tion layer
3.2 mm thickness low-iron tempered textured glass cover
4
1
SPECIFICATION
Overall data
Absorber
Others
Collector dimension (mm)
Overal area
2000×1000×80
2.0 m²
2000×1250×80
2.5 m²
MGS-2000BLT MGS-2500BLT
KEY SPECIFICATION
FLAT SOLAR COLLECTOR
05
Weight 33kg 41kg
150/330 pcs 120/260 pcs
8 copper tubes 10 copper tubes
Snow load Max. 800kg/m²
Wind load Max. 300kg/m²
Tilt angle Minimum 120 - Maximum 900
Loading capacity (pcs)in 20ft/ 40ft container
Absorber area
Fluid capacity
Insulation material
Back sheet
Frame
Glass cover
Frame color Sealing
Max.working pressure 6 Bar
Copper Pipe (mm)
Welding way
Φ8, 10, 22 mm
Laser welding - Germany technology
Absorber Aluminium/ Copper with blue selective coatingimported from Germany
Absorption 95±3%
Fibre glass: 25mm - 30mm
Low iron tempered textured glass 3.2mm (option 4.0mm)
Aluminium alloy - Japan standard
Aluzinc steel (option SUS304)
Silver (option Black / Grey)
EPDM and Silicon glue
1.84 m²
1.8L
Recom flow rate 40 - 80L/h/m²
International certification CE; ISO 9001:2015 ; Solar keymark
2.35 m²
2.2L
Max. stagnation temperature
2300C
9 BarTesting pressure
Parallel harp grid
06
FLAT SOLAR COLLECTOR
(Gb = 200 W/m², Gd = 200 W/m²)400 W/m²
(Gb = 440 W/m², Gd = 260 W/m²)700 W/m²
(Gb = 850 W/m², Gd = 150 W/m²)1000 W/m²
70
0
10
30
500
651
566
363
115309
1139
1054
851
603797
1627
1542
1339
1091
IRRADIANCE
m - a in Kϑ ϑ
TEST RESULTS FOR GLAZED LIQUID HEATING COLLECTORS UNDER STEADY-STATE CONDITIONS POWER OUTPUTCollector power output record - Model MGS-2500BLT
Collector power output record - Model MGS-2000BLT
0
50
100
150
200
250
300
350
0 0.005 0.01 0.015 0.02 0.025 0.03 0.035
Pres
sure
Dro
p [P
a]
Flow
Rat
e [k
g/(m
2*s)
]
0.000
0.005
0.011
0.017
0.024
0.030
Flow rate [kg/s.m2]
0
10
60
120
210
320
ΔP [Pa]
PRESSURE DROP MEASUREMENTS OF COLLECTOR AT FILE MASS FLOWRATESm - a in Kϑ ϑ
0
200
400
600
800
1000
1200
1400
1600
1800
0 10 20 30 40 50 60 70 80
MGS-2500BLT
MGS-2000BLT
Pow
er O
utpu
t per
col
lect
or u
nit
[W]
Pow
er o
utpu
t per
col
lect
or u
nit
(for G
= 1
000
W/m
2)
0 120 510
(Gb = 200 W/m², Gd = 200 W/m²)400 W/m²
(Gb = 440 W/m², Gd = 260 W/m²)700 W/m²
(Gb = 850 W/m², Gd = 150 W/m²)1000 W/m²
70
0
10
30
50
530
460
280
30
920
850
670
430
1320
1250
1070
820
IRRADIANCE
m - a in Kϑ ϑ
0 120 510
FLAT SOLAR COLLECTOR
07
CERTIFICATE Solar Keymark Certificate
No. SP SC1014-17 Holder/Issued to/Manufacturer Company: MEGASUN Co., Ltd. Address: 387-388/5B- 5B Block – Tan Bien Ward, Bien Hoa City – Dong Nai Province - Vietnam
Product name and description Flat plate solar thermal collectors for water heating. For technical information see Appendix (2 pages).
Models: MGS-2000BLT MGS-2500BLT
Certificate The product is found to comply with the requirements in EN 12975-1:2006+A1:2010 Solar collectors Part 1: General requirements and the Specific CEN Keymark Scheme Rules for Solar Thermal Products, and are based on test results according to EN ISO 9806:2013 Solar thermal collectors – Test methods.
Marking Products conforming to this certificate shall be marked in accordance with the requirements in the Specific CEN Keymark Scheme Rules for Solar Thermal Products. The marking shall, together with the Keymark logo, show the identification code of the empowered certification body (SP Technical Research Institute of Sweden, No. 012), also see CEN-CENELEC Internal Regulations Part 4 Certification, Annex A.
Validity This certificate is valid until 2021-09-21 provided that the conditions in the Solar Keymark Rules are fulfilled and the standard or rules are not modified significantly. The validity of the certificate can be checked in the database, see Solar Keymark website http://www.solarkeymark.org.
Miscellaneous The manufacturer's factory production control procedures are under surveillance by the responsibility of SP. This is the first version of this certificate. Borås, Sweden 2017-07-31 SP Technical Research Institute of Sweden Certification Johan Åkesson Magnus Sturesson Certification Manager Certification Officer
012 SP Technical Research Institute of Sweden Empowered Certification Body No. 012: SP Certification, Sweden
For more information of Solar Keymark visit: www.solarkeymar.org This certificate may not be reproduced other than in full, except with the prior written approval by SP. SP Certification rules SPCR402 applies.
Box 857, SE-501 15 Borås, Sweden Phone: +46 10-516 50 00 E-mail/internet: [email protected]/www.sp.se
MEGASUN flat collectors produced in Vietnam by MEGASUN Co., Ltd with ISO9001:2015 quality manage-ment system - has been granted many national noble certificates and awards such as Vietnam High Quali-ty Goods, Gold Cup for Construction Industry, Qualified and Reputable Brand, and Golden Product. In addition, these products have been granted certificates in accordance with European standards (CE mark) , Solar Keymark ( Germany standard )
FORCED CIRCULATED SYSTEM
Inner Tank
Outer Tank
Frame & Stand
Insulating Materials
Back-up Electric
Resistance (included)
Heating capacity (Liters)
Corrosion Protective
Safety Components
Model of Collectors
Collector Dimension
Accessory kit
Manufacturing Standards
Max. working pressure
Safety Components
SUS304 - 2B 1.5mm SUS304 - 2B 2.0mm SUS304 - 2B 2.0mm
Galvanized Steel 0.5mm (or option Stainless Steel SUS304 - 2B) Stainless SteelSUS304 - 2B 0.5mm
150 200 300 400 1000
MGS-2000BLT MGS-2500BLT MGS-2000BLT MGS-2500BLT MGS-2500BLT
2000X1000 2000X1250 2000X1000 2000X1250 2000X1250
1 1 2 2 5
Galvanized Steel 2.0mm (or option Stainless Steel SUS304-2B)
Polyurethane foam thickness 50 mm - in mold rise density 40-45 kg/m3
2kw x 220v titanium element heater is controlled by auto-intelligent controller(can be adjust the on & off temparature
can be adjust the on & off time armani interyrated ELCB to protect the leakage current )
27 x 50mm Magnesium Rod as softener, anticorrosive, enhanced safety and tank life time
Solar controller, circulation pump, expansion pot & copper fittings
CE, ISO 9001:2015, TCVN 8251:2008
Testing pressure: 9 bar / Working pressure: 6 bar
1 one way valve; 2 pressure relief valve
Model MGS-150CA-TR MGS-200CA-TR MGS-300CA-TR MGS-400CA-TR MGS-1000CA-TR
08
FORCED CIRCULATED SYSTEM
SOLAR HOT WATERFORCED CIRCULATED SYSTEM
09
FORCED CIRCULATED SYSTEM
1 Flat Solar Collector
2 Solar hot water tank
3 Solar controller
4 Pump station
4
3
1
2
Aboved copper fittings is not included in Flat collector package
Easy and quick installation – flush and fill ports, air-vent, shut-off and check valves, 3 speed solar pump. Quick and secure collector fitting installation without the need for tools (plug-in system). Facto-ry-wired solar pump, control and sensors. The hot water tank protected from corrosion with stainless steel SUS 304, SUS 316 or enamel coating inner tank and magnesium anode for long reliable system life.
Energy savings and environmental protection by heating the hot water tank with solar energy. Simplified planning and ordering with prefabricat-ed matching components. Perfectly sized for efficient of hot water tank heat-ing in residential applications for new construction or retrofit.
The benefits at a glance
COMPACT FLAT SOLAR WATER HEATER
10
1250
200L
1000
150L
2050
300L
8
2500
400L
115
MGS-2000BLT MGS-2500BLT MGS-2000BLT MGS-2000BLT MGS-2500BLT
2000X1000 2000X1250 2000X1000 2000X1000 2000X1250
1 1 2 1 1
CE, ISO 9001:2015, TCVN 8251:2008
MGS-2000BLT MGS-2500BLT MGS-2500BLT
2000X1000 2000X1250 2000X1250
2 2 5
COMPACT SYTEM
SUS304 - 2B 0.6mm SUS304 - 2B 1.5mm SUS304 - 2B 2.0mm
Galvanized Steel 0.5mm (or option Stainless Steel SUS304 - 2B) SUS304 - 2B 0.5mm
150 200 300 400 1000
Galvanized Steel 2.0mm (or option Stainless Steel SUS304-2B)
Polyurethane foam thickness 50 mm - in mold rise density 40-45 kg/m3
2kw x 220v titanium element heater is controlled by auto-intelligent controller(can be adjust the on & off temparature
can be adjust the on & off time armani interyrated ELCB to protect the leakage current )
27 x 50mm Magnesium Rod as softener, anticorrosive, enhanced safety and tank life time
Open tank - Non-preassurable Testing Pressure: 9 bar/ Working pressure: 6bar
Open tank / Copper fitting 1 one way valve; 2 pressure relief valve
Model MGS-150KCA MGS-200KCA MGS-300KCA MGS-150CA MGS-200CA
SUS304 - 2B 3.0mm
300 400 1000
MGS-300CA MGS-400CA MGS-1000CA
No.of Collectors
Model of Collectors
Collector Dimension
Manufacturing Standards
Inner Tank
Outer Tank
Frame & Stand
Insulating Materials
Back-up Electric
Resistance (included)
Heating capacity (Liters)
Corrosion Protective
Max. working pressure
(KPa)
Safety Components
11
APLICATIONS OF FLAT COLLECTOR
AUTOMATIC PRODUCTION LINE
COMPACT FLAT SOLAR WATER HEATER
MEGASUN flat collectors have been widely applied in many fields (produce hot water with lowest cost) such as restaurants, hotels, resorts, hospitals, food processing plants, beverage, seafood procesing plants, livestock and poultry slaughter.
Images of the system deployed the real installation (Customers can see more images at: www.megasun.com.vn )
MEGASUN flat collectors is produced on Germany technology with automatic production line - provide to users the best quality products with competitive price.
FLAT SOLARCOLLECTOR
MEGASUN MANUFACTURE CO.LTD.Address: 387-388 / 5B Quarter 5, Tan Bien ward, Bien Hoa city, Dong Nai province, VietnamTel: +84-251-3888 777Fax: +84-251-388 2434
E-mail: [email protected]: www.megasun.com.vn
B19-
09A
2019
-09
MTK
EN