flat belt conveyer sv series ...belts with crosspieces prevent belt meandering. erotating direction...
TRANSCRIPT
-
-10611 -10621
Flat Belt Conveyer SV SeriesHead Drive, 2-Slot Frame Type (Pulley Dia. 30mm)
Flat Belt Conveyer SV SeriesWith Meandering Prevention Crosspiece, Head Drive, 2-Slot Frame Type (Pulley Dia. 30mm)
QFeature: Streamlined structuring has achieved the low cost starting from THB13,650 level. QFeature: Streamlined structuring has achieved the low cost. Belts with crosspieces prevent belt meandering.
ERotating direction of the belt is the same as motor rotating direction when gear ratio is 25 or less, and the opposite when gear ratio is 30 or more. EFor connection diagram and inverter details, see P.1091~ .EFor Flat Belt details, see wP.1097.EWhen "No motor, gearhead" is selected, motor mounting hole pitch will vary depending on the motor's power rating. Please see "Technical Information" in "Conveyer Selection Site" for the dimension details.EWhen "No motor, gearhead" is selected, this unit will be delivered unassembled. Customer is to assemble the unit according to the included assembly instructions. See "Conveyer Selection Site" for assembly procedures and packaging details.
Part Number B
L5mm
Increment
MotorBelt Specification
Motor ManufacturerE�The prices vary by
manufacturer.Output
(W) Voltage (V) SpecificationGearhead Reduction
Ratio
SVKB
50100150200250
300~3000
625
T100(Single-Phase)
T200(Single-Phase)
IM(Induction Motor)
SCM(Variable Speed Motor)
51860150
7.52575180
93090
12.536100
1550120
H (General Purpose, Green)W (General Purpose, White)
G (For Sliding, Green)S (For Sliding, White)
D (For Electronic Parts Transfer)O (Oil Resistant)N (Non-adhesive)
J (No Belt)
A (Panasonic Motor)B (Oriental Motor)C (Taiwanese Motor)
25 S200 (3 Phase)IM (Induction Motor)
INV(Induction Motor + Inverter) X5~9 not applicable for 6W Motor
625 NV (No Motor) NM (No Motor) NH (No Gearhead) R (No Motor, Gearhead)
Part Number - B - L -
Motor- Belt Specification -
Motor ManufacturerOutput - Voltage - Specification - GearheadReduction Ratio
SVKB - 100 - 1000 - 25 - T100 - IM - 25 - H - C
10
Frame Motor Cover Pulley HolderMMaterial Aluminum Aluminum AluminumSSurface Treatment Clear Anodize Painted Painted
Frame Motor Cover Pulley HolderMMaterial Aluminum Aluminum AluminumSSurface Treatment Clear Anodize Painted Painted
For B=50,
For B=100~250,
CAD Data Folder Name: 17_Conveyers CAD Data Folder Name: 17_Conveyers
DP.1101Motor Position ReversedAdditional Counterbores
Stands (Legs)
ERotating direction of the belt is the same as motor rotating direction when gear ratio is 25 or less, and the opposite when gear ratio is 30 or more. EFor connection diagram and inverter details, see P.1091~ . EFor Flat Belt details, see wP.1097.EWhen "No motor, gearhead" is selected, motor mounting hole pitch will vary depending on the motor's power rating. Please see "Technical Information" in "Conveyer Selection Site" for the dimension details.EWhen "No motor, gearhead" is selected, this unit will be delivered unassembled. Customer is to assemble the unit according to the included assembly instructions. See "Conveyer Selection Site" for assembly procedures and packaging details.
Part Number B
L5mm
Increment
MotorBelt Specification
Motor ManufacturerE�The prices vary by
manufacturer.Output
(W) Voltage (V) SpecificationGearhead Reduction
Ratio
SVKA
50100150200250
300~3000
625
T100(Single-Phase)
T200(Single-Phase)
IM(Induction Motor)
SCM(Variable Speed Motor)
51860
150
7.52575
180
93090
12.536
100
1550
120
H (General Purpose, Green)W (General Purpose, White)
G (For Sliding, Green)S (For Sliding, White)
D (For Electronic Parts Transfer)F (For Food Transfer)
O (Oil Resistant)N (Non-adhesive)
J (No Belt)
A (Panasonic Motor)B (Oriental Motor)C (Taiwanese Motor)
25 S200 (3 Phase)IM (Induction Motor)
INV (Induction Motor + Inverter) X5~9 not applicable for 6W Motor
625 NV (No Motor) NM (No Motor) NH (No Gearhead) R (No Motor, Gearhead)
D P.1101Motor Position ReversedAdditional Counterbores
Stands (Legs)
Part Number - B - L -
Motor- Belt Specification -
Motor ManufacturerOutput - Voltage - Specification - GearheadReduction Ratio
SVKA - 100 - 1000 - 25 - T100 - IM - 25 - H - C
10
Output (W)
Motor Reduction Ratio ASpecification Manufacturer
6W
Induction Motor
Panasonic 5~25 101.030~180 108.0
Oriental 5~25 105.030~180 115.0
Taiwanese 5~75 114.790~180 120.7
Variable Speed Motor
Panasonic 5~25 111.030~180 118.0
Oriental 5~25 115.030~180 125.0
Taiwanese 5~75 126.990~180 132.9
25W
Induction Motor
Panasonic 5~180 115.0
Oriental 5~18 117.025~180 127.5
Taiwanese 5~75 129.090~180 136.0
Variable Speed Motor
Panasonic 5~180 125.0
Oriental 5~18 127.025~180 137.5
Taiwanese 5~75 139.590~180 146.5
*A dim. details
QGearhead Reduction Ratio
Gearhead Reduction Ratio
Belt Speed (m/min)50Hz 60Hz
5 56.4 67.77.5 37.6 45.19 31.3 37.6
12.5 22.6 27.115 18.8 22.618 15.7 18.825 11.3 13.530 9.4 11.336 7.8 9.450 5.6 6.860 4.7 5.675 3.8 4.590 3.1 3.8
100 2.8 3.4120 2.4 2.8150 1.9 2.3180 1.6 1.9
* May decrease depending on load condition.
QConveying Capacity * Reference Value
10 20 40 5030 6000
Belt Speed m/min
5
10
15
20
Tran
sfer
Mas
s kg
/Uni
t
6W25W
SVKA Frame Cross Section and Enlarged View (Symmetrical)6W Motor Type
EFor B=50, down facing slot is not provided.EFor B=200, 250, *2 section thickness is 4.ECompatible with JIS standard hex nuts.
*1 When L≥2005, belt support rollers are mounted at these positions.
(13)
88
29
(B+10)/213
1411.8
2.5 1.55
5.2
8.2
+0.
50
Carrying Surface Side
3*2
13
15
R 5
X Part
3*2 5
9
R 5
3
(13)29
X Part
8
13
8
3
5
13
1411.8
R 5
Carrying Surface Side
X Part (for M5)
B+40 (Frame Width)+0.5
0
B+40 (Frame Width)+1 0
L/2
30 X Part
L+31.8L: Distance between Pulleys
136.
9
15.9
102.5
B+80
60B
: Bel
t Wid
th20
152
40
B+50
60 sq.
15.9
32.5
A*
Direction ofConveyance
1.4
(Belt
Uppe
r Sur
face
)2931
.8
60
79
Ø30Ø30
CapacitorFor Single-phase Induction Motor only
M5Depth 10
Belt Support Roller *1
Meandering PreventionCrowned Type M5 Screw for Tension
Belt Support Roller *1
Ø28.6
20
23
M5
25W Motor Type
2931.8
60
136.
9
79
Ø30
80 sq.
B: B
elt W
idth
2060
B+80
32.5
152
40
A*
CapacitorFor Single-phase Induction Motor only.
E�The dimensions in the diagram is for belt specification H (0.9mm THK.). Take note that belt thickness varies by belt specifications. For belt specifications, see P.1097
E�The X part of the frame is used for pulley holder mounting. The nuts cannot be moved to this area.
Body Price + Motor, Belt Spec. Price = Unit PriceEx.) For No Belt SVKA-100-1000-25-T100-SCM-25-J-A y THB25,844 + THB5,005 - THB1,820 = THB29,029Ex.) For No Motor, Gearhead SVKA-100-1000-25-NV-NM-NH-H-R y THB25,844 - THB2,730 = THB23,114
EFor orders larger than indicated quantity, Days to Ship and Price are to be quoted.
Part Number B
Body Price 1 ~ 2 pc (s).L300~
400L405~
500L505~
600L605~
700L705~
800L805~
900L905~1000
L1005~1100
L1105~1200
L1205~1300
L1305~1400
L1405~1500
L1505~1600
L1605~1700
L1705~1800
L1805~1900
L1905~2000
L2005~2200
L2205~2400
L2405~2600
L2605~2800
L2805~3000
SVKA
50100150 - -200 - - -250 - - - - -
Motor,Belt
Spec. Price
Motor Output Specification A (Panasonic Motor) B (Oriental Motor) C (Taiwanese Motor) R (No Motor, Gearhead) J (No Belt)
6W25W
IMSCMINV
Output (W)
Motor Reduction Ratio ASpecification Manufacturer
6W
Induction Motor
Panasonic 5~25 101.030~180 108.0
Oriental 5~25 105.030~180 115.0
Taiwanese 5~75 114.790~180 120.7
Variable Speed Motor
Panasonic 5~25 111.030~180 118.0
Oriental 5~25 115.030~180 125.0
Taiwanese 5~75 126.990~180 132.9
25W
Induction Motor
Panasonic 5~180 115.0
Oriental 5~18 117.025~180 127.5
Taiwanese 5~75 129.090~180 136.0
Variable Speed Motor
Panasonic 5~180 125.0
Oriental 5~18 127.025~180 137.5
Taiwanese 5~75 139.590~180 146.5
*A dim. details
QGearhead Reduction Ratio
Gearhead Reduction Ratio
Belt Speed (m/min)50Hz 60Hz
5 56.4 67.77.5 37.6 45.19 31.3 37.6
12.5 22.6 27.115 18.8 22.618 15.7 18.825 11.3 13.530 9.4 11.336 7.8 9.450 5.6 6.860 4.7 5.675 3.8 4.590 3.1 3.8100 2.8 3.4120 2.4 2.8150 1.9 2.3180 1.6 1.9
* May decrease depending on load condition.
QConveying Capacity * Reference Value
10 20 40 5030 6000
Belt Speed m/min
5
10
15
20
Tran
sfer
Mas
s kg
/Uni
t
6W25W
SVKB Frame Cross Section and Enlarged View (Symmetrical)
For B=50,
For B=100~250,
6W Motor Type
EFor B=50, down facing slot is not provided.EFor B=200, 250, *2 section thickness is 4.ECompatible with JIS standard hex nuts.
*1 When L≥2005, belt support rollers are mounted at these positions.
L/2
L+31.6L: Distance between Pulleys
136.
8
15.8
102.5
B+80
60B
: Bel
t Wid
th20
152
40
B+50
60 sq.
15.8
32.5
A*
Direction ofConveyance
1.3
(Belt
Uppe
r Sur
face
)2931
.6
60
79
Ø30Ø30
CapacitorFor Single-phase Induction Motor only
M5 Depth 10Belt Support Roller *1
Belt Support Roller *1
Ø28.6
20
23
M5
M5 Screw for Tension
30 X Part
(13)
88
29
(B+10)/213
1411.8
2.5 1.55
5.2
8.2
+0.
50
Carrying Surface Side
3*2
13
15
R 5
X Part
3*2 5
9
R 5
3
(13)29
X Part
8
13
8
3
5
13
1411.8
R 5
Carrying Surface Side
X Part (for M5)
B+40 (Frame Width)+0.5
0
B+40 (Frame Width)+1 0
25W Motor Type
2931.6
60
136.
8
79
Ø30
80 sq.
1.3 (B
elt
Uppe
r Surf
ace)
B: B
elt W
idth
2060
B+80
32.5
152
40
A*
CapacitorFor Single-phase Induction Motor only.
E�The dimensions in the diagram is for belt specification H (0.8mm THK.). Take note that belt thickness varies by belt specifications. For belt specifications, see P.1097.
E�The X part of the frame is used for pulley holder mounting. The nuts cannot be moved to this area.
Body Price + Motor, Belt Spec. Price = Unit PriceEx.) For No Belt SVKB-100-1000-25-T100-SCM-25-J-A y THB31,850 + THB5,005 - THB1,820 = THB35,035Ex.) For No Motor, Gearhead SVKB-100-1000-25-NV-NM-NH-H-R y THB31,850 - THB2,730 = THB29,120
EFor orders larger than indicated quantity, Days to Ship and Price are to be quoted.
Part Number B
Body Price 1 ~ 2 pc (s).L300~
400L405~
500L505~
600L605~
700L705~
800L805~
900L905~1000
L1005~1100
L1105~1200
L1205~1300
L1305~1400
L1405~1500
L1505~1600
L1605~1700
L1705~1800
L1805~1900
L1905~2000
L2005~2200
L2205~2400
L2405~2600
L2605~2800
L2805~3000
SVKB
50100150200 -250 - -
Motor,Belt
Spec. Price
Motor Output Specification A (Panasonic Motor) B (Oriental Motor) C (Taiwanese Motor) R (No Motor, Gearhead) J (No Belt)
6W25W
IMSCMINV
http://th.misumi-ec.com/mech/
https://www.misumi-ec.com/th/