1514 WE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE. COPYRIGHT © E. & O.E. WE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE. COPYRIGHT

l Compact design l Slant bed 45° for particularly large machining diameter l Easy chip removal into the chip trayl Dimensionally stable linear guides ensure a long service thanks to maximum static and dynamic stiffness l Hardened and Grinded ball screw spindles l All servomotors with integrated encoder for maximum precision l Renishaw measuring arm for manual tool measuring l Tailstock with hydraulic quill l Portable electronic hand wheel substantially facilitates running in of programs l Chip conveyor l Chip carriage l Work lamp l Software package "SINUMERIK 808D on PC" inc. (Practical training software allowing workpieces to be programmed and simulated on a PC offline.

Flat Bed Lathes L 440 0351-4410

L 460 0351-4420

Featuresl High-precision machine with the latest SIEMENS control and SIEMENS servo drives l Compact spindle stock designl High-speed spindle 4,500 rpm with high-precision and generously dimensioned taper roller bearingsl Shifting between the two gears occurs pneumatically via a compressed air cylinderl Spindle stock design guarantees minimal noise development l Wide machine bed with double-square guide rails, also for roughing workl Bed rails tempered and grinded l Generously dimensioned tailstock and easily positionable with quick clamping mechanisml Two separately movable sliding doors with integrated view windows at frontl Microswitch prevents starting the machine if the door is not fully closed l RJ45 plug-in connection, USB connection/ 230 V power connectionl Mobile control panel l Two electronic hand wheels for manual control of the X and Z axis l Automatic spindle stock lubricationl Automatic lubrication of longitudinal and transverse slidesl Halogen work lamp l Closed electrical cabinet with integrated heat exchanger ensures an optimal temperature even in case of high ambient temperatures, and prevents dirt particle penetrationl Hard and soft block jaws l Tailstock end cover l Six machine feet l Heat exchanger l EMC (electromagnetic compatibility)

Included as Standard• Siemens 828 D Basic T Controller • 8 Station Turret LS 160 VDI 40 • 200mm Hydraulic Chuck • Heat Exchanger • Tailstock • Headstock • Tool Change System • Hydraulic Unit • Coolant Equipment • 3D Simulation

Specification L 440 / L 460Electrical Connection 400V 3Ph 50Hz Speeds 1st/2 Gear 100-950/900-4500 rpmTotal Connected Load 25 KVA Torque Stage 1/ stage 2 525Nm/382 NmSpindle Motor S1 op 11 kW Hyd. Tool Turret LS 160 VDI 40 Toque Drive motor S1 op 70 Nm No.of tools 8Drive Motor S6 30% op 23 kW Max Tool Shank 25 x 25 mmToque Drive Motor S6 30% 148 Nm Max Chuck Drill Rod Ø32 mmSpindle Taper ISO 702-1 No6 Repeat Accuracy ± 0.005 mmSpindle Bore Ø65 mm Positioning Accuracy ± 0.005 mmChuck Passage Ø52 mm X axis Travel 260 mmHydraulic Lathe Chuck Ø200 mm Z axis Travel 1,150 mm / 1680 mmCoolant Pump Motor 375 W Z axis/Y Axis Feed Speed 15,000 mm/minCoolant Tank Capacity 170 Litres X axis Motor Torque 6 NmHydraulic Pump Motor 750 W Z axis Motor Toque 16 NmTank Capacity 50 Litres Tailstock Taper MT4 Centre Height 235 mm Tailstock Quill Dia. Ø65 mmBetween Centres 1000 mm/1500 mm Tailstock Quill Travel 150 mmTurning Over Cross Slide Ø240 mm Dims Length 303 cm / 353 cm Turning Over Bed Ø475 mm WxH 195 x 203 cmSwing In Gap Ø710 mm Weight Kg 3000 / 3450

Optional AttachmentsInternal Tool Cooling 440 0351-4410-01Internal Tool Cooling 460 0351-4420-01Joystick 440 0351-4410-02Joystick 460 0351-4420-02Fixed Steady 20-200 mm 440 0351-4410-03Fixed Steady 20-200 mm 460 0351-4420-03Travel. Steady10-100 mm 440 0351-4410-04Travel. Steady10-100 mm 460 0351-4420-04Chip Conveyor L440 1.0M 0351-4410-05Chip Conveyor L460 1.5M 0351-4420-05Chip Trolley 0351-4410-06

VDI 40 Equipment VDI 40 Starter Set 0353-6116 Square transverse mount 0353-6251Square trans.overhead mount 0353-6252Square longitudinal mount 0353-6253Sealing covers. 0353-6256Spring collet holder ER 25 0353-6257Spring collet spanner ER 25 0353-6260ER 25 spring collet set 15 pcs. 0344-1109Drill Chuck 1-13mm 0353-6259Tool holder Round Blank 0353-6258Drill rod holders 10,12,16,20,25 mm page 19

With Siemens 828D Controller

16 WE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE. COPYRIGHT © E. & O.E. WE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE. COPYRIGHT

Flat Bed Lathes L 44 0351-4330

Features

Included as Standardl Siemens 828 D Controller l 8 Station Turret VDI30 l 160mm Hydraulic Chuck (a)l Heat Exchanger (b)l Tailstock (c)l Hydraulic Unit l Central Lubrication System l 3D Simulation

l Spindle and servo motors by SIEMENS l Fully cladded with safety device l Operating tooll Integrated coolant unit with 90 litre coolant tank l Automatic centralised lubricationl With max. spindle speed up to 3,000 rpm as standard l Swivelling operating unitl Electronic handwheels for the X & Z axis l RJ45 plug-in connection, USB power connection 230Vl Including two years of SIEMENS warranty l Tailstock cover l 6 machine feet l EMC (electromagnetic compatibility)

Specification L 44Electrical Connection 400V 3Ph 50Hz Bed Width 300 mmTotal Connected Load 23 KVA Speeds 10-3000 rpmSpindle Motor S1 op 7 kW Hyd. Tool Turret VDI 30 Torque Drive motor S1 op 33 Nm No.of tools 8Drive Motor S6 30% op 16 kW Max Tool Shank 20 x 20 mmTorque Drive Motor S6 30% 80 Nm Max Chuck Drill Rod Ø25 mmSpindle Taper ISO 702-1 No5 Repeat Accuracy ± 0.005 mmSpindle Bore Ø52 mm Positioning Accuracy ± 0.005 mmChuck Passage Ø40 mm X axis Travel 250 mmHydraulic Lathe Chuck Ø150 mm Z axis Travel 760 mmCoolant Pump Motor 270 W Z axis/Y Axis Feed Speed 15,000 mm/minCoolant Tank Capacity 90 Litres X axis Motor Torque 6 NmHydraulic Pump Motor 750 W Z axis Motor Toque 8.5 NmTank Capacity 50 Litres Tailstock Taper MT4 Centre Height 223 mm Tailstock Quill Dia. Ø52 mmBetween Centres 850 mm Tailstock Quill Travel 165 mmTurning Over Cross Slide Ø240 mm Dims LxWxH 253 x 160 x 180 cm Turning Over Bed Ø446 mm Weight Kg 3070 Swing In Gap Ø520 mm

VDI 30 Equipment VDI 30 Starter Set 0353-6115 Square transverse mount 0353-6231Square trans. overhead mount 0353-6232Square longitudinal mount 0353-6233Sealing covers. 0353-6236ER25 Spring collet holder 0353-6237ER25 collet chuck spanner 0353-6240ER 25 spring collet set 15 pcs. 0344-1109Drill Chuck 1-13mm 0353-6239Tool holder Round Blank 0353-6238Drill rod holders 10 mm, 0353-6241Drill rod holders 12 mm 0353-6242Drill rod holders 16 mm 0353-6243Drill rod holders 20 mm 0353-6244Drill rod holders 25 mm 0353-6245

With Siemens 828D Controller

Optional Attachments

Hydraulic Tailstock Sleeve 0351-4330-01Fixed Steady 10-130mm 0351-4330-02Travel. Steady 10-100mm 0351-4330-03

1716 WE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE. COPYRIGHT © E. & O.E. WE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE. COPYRIGHT

L 44 0351-4330 With Siemens 828D Controller

L 34HS 0350-4232

Flat Bed Lathes

l Precision workmanship l Braced machine bed made from grey cast-iron l Complex spindle bearingl Bed guide rails induction hardened (HRC 42-52) and precision ground l Emergency stop button l Central lubrication l Grinded ball screw spindles l Maintenance-friendly protective housing l Access flap on rear for maintenance l SIEMENS feed motorsl Software package “SINUMERIK 808D on PC” inc.l Safety switch on front sliding door l Turret located behind the lathe centre (left turning tool)

Features

Specification L 34 HSIncluded as Standardl Siemens 808D Controller l 160mm 4 Jaw Chuck l Coolant equipment l Machine lamp l Operating tools

l RJ45 Ethernet port l 8.4" LCD colour display with a resolution of 800x600l Ready for remote maintenance l AST function gives users an easy optimisation option in case of stricter dynamic and precision requirementsl Absolute encoder / no referencing move required l Ensures greater precission

SIEMENS SINUMERIK 808D ADVANCED

Electrical Connection 400V 3Ph 50Hz Tool Turret electricalTotal Connected Load 8 KVA No.of tools 6Spindle Motor S1 op 3.7 kW Max Tool Shank 16 x 16 mmTorque Drive motor S1 op 23.6 Nm Max Chuck Drill Rod Ø16 mmTorque at the Spindle 40 Nm Repeat Accuracy ± 0.015 mmSpindle Taper Din 6350 A2-4 Positioning Accuracy ± 0.03 mmSpindle Bore Ø46 mm X axis Travel 185 mmChuck Passage Ø42 mm Z axis Travel 540 mmLathe Chuck Ø160 mm X axis Feed Speed 6,000 mm/minCoolant Pump Motor 95 W Z axis Feed Speed 8,000 mm/minCoolant Tank Capacity 75 Litres X axis Motor Torque 4 NmCentre Height 170 mm Z axis Motor Toque 6 NmBetween Centres 800 mm Tailstock Taper MT3Turning Over Cross Slide Ø152 mm Tailstock Quill Dia. Ø45 mmTurning Over Bed Ø340 mm Tailstock Quill Travel 120 mmBed Width 208 mm Dims LxWxH 196 x 148 x 171 cmSpeeds 30-3500 rpm Weight Kg 1200

With Siemens Sinumerik808D Advanced Controller

18 WE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE. COPYRIGHT © E. & O.E. WE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE. COPYRIGHT

L 28 HS 0350-4220

Flat Bed Lathes

Featuresl Braced machine bed made from grey cast-iron l Complex spindle bearing l Emergency stop buttonl Central lubrication l Reference switch l Maintenance-friendly protective housingl Access flap on rear for maintenance l Safety switch on front sliding doorl Turret located behind the lathe centre (left turning tool) l Linear guidel Software package “SINUMERIK 808D on PC” included.

Included as Standard

SIEMENS SINUMERIK 808D ADVANCED

Electrical Connection 400V 3Ph 50Hz No.of tools 6Total Connected Load 3.75 KVA Max Tool Shank 16 x 16 mmSpindle Motor S1 op 2.2 kW Max Chuck Drill Rod Ø16 mmTorque Drive motor S1 op 14 Nm Repeat Accuracy ± 0.02 mmTorque at the Spindle 28 Nm Positioning Accuracy ± 0.03 mmSpindle Taper Din 6350 A2-3 X axis Travel 145 mmSpindle Taper 5C Z axis Travel 465 mmSpindle Bore Ø30 mm X axis Feed Speed 6,000 mm/minLathe Chuck Ø125 mm Z axis Feed Speed 8,000 mm/minCoolant Pump Motor 95 W X axis Motor Torque 1.3 NmCoolant Tank Capacity 25 Litres Z axis Motor Toque 2.4 NmCentre Height 169 mm Tailstock Taper MT2Between Centres 430 mm Tailstock Quill Dia. Ø30 mmTurning Over Cross Slide Ø150 mm Tailstock Quill Travel 120 mmTurning Over Bed Ø300 mm Dims LxWxH 166 x 149 x 196 cmSpeeds 42-4000 rpm Weight Kg 900Tool Turret electrical

Specification L 28 HSl Siemens 808D Controllerl 125mm 3 Jaw Chuckl Coolant equipmentl Machine lampl Operating tools

l PPU141.3 l 7.5" colour display l 80-bit NANOFP precision in nanometer rangel High-resolution positional feedback l Easy communication via USB l File handling like on a PCl CNC programming on DIN/ISO basis l SINUMERIK CNC high-level languagel Context-sensitive onboard help l Play and spindle error compensation l Technological cyclesl 2D CNC simulation and Simoltanous Recording

With Siemens Sinumerik808D Advanced Controller