Bitzania A. Monroy
1 Crop a perfect squareand
Fold diagonally
Bitzania A. Monroy
2 Now fold in half in both sides as shown
to create these creases
Bitzania A. Monroy
3Using these creases
you have made, bring the top 3 corners of
the model to the bottom corner.
Bitzania A. Monroy
3 flatten model, as shown
Bitzania A. Monroy
4 Fold top triangular flaps into the center
and unfold
Bitzania A. Monroy
5Open the uppermost flap, and bringing it
upwards and pressing the sides of the model inwards at the same
time.
Bitzania A. Monroy
5 Flatten down, creasing well
Bitzania A. Monroy
6 Turn model over and repeat Steps 4 -5 on
the other side.
Bitzania A. Monroy
7 Opens both corners and bends as shown.
Bitzania A. Monroy
7 You must have this form.
Bitzania A. Monroy
8Push the bottom “leg”
and tuck it inside itself to create a
head. And push the other “leg” to the left
side a little bit.
Bitzania A. Monroy
8Push the bottom “leg”
and tuck it inside itself to create a
head. And push the other “leg” to the left
side a little bit.
Bitzania A. Monroy
9 Fold the points of the bottom up, on each
side
Bitzania A. Monroy
1 Fold the end of the wings down, in both
sides. 0