fiwarec catalogue
TRANSCRIPT
Innovative SolutionsTo Fire Safety
AUTOMATIC FIRE DETECT
& SUPPRESSION SYSTEM
SUPPRESS FIRE THE MOMENT IT STARTS
Fail Safe
Linear heat and flame detection allows
unlimited amount of detection points.
Stops any fire that crosses its path.
Fast and Efficient
In the event fire, the sensor hose bursts at the
hottest spot. The loss in pressure causes the valve
to open and release the fire extinguishing agent.
The fire is extinguished within seconds.
Stand Alone
Does not require any
external power supply.
Great Flexibility
Can be installed
anywhere across the
hazard risk area.
TWO SYSTEMSCOUNTLESS APPLICATIONS
FiWaGuard - Direct FiWaGuard - Indirect
Switch gear Installation
Panel Installation
• Simple and self-activating.
• Flexible and fast acting.
• Most efficient for small enclosed hazard areas.
• Versatile and self-activating.
• Flexible and fast acting.
• Most efficient for largerand open hazard areas.
Extinguishing Agent Sensor Tube
Fire
Sensor Tube
Separate Pipe Work
Extinguishing Agent
Fire
Boat Engine Car Engine Installation
Upon flame impingement or heat, the
pressurized sensor tube which is connected
to a cylinder containing the suppression
agent ruptures with a burst at the hottest
point. The agent is then discharged through
the burst hole directly to the heart of fire.
Upon flame impingement or heat, the
pressurized sensor tube which is again
connected to a cylinder will activate the
cyclinder valve to open. The agent then is
released through separate pipe work and
nozzles which are aiming at the hazard area.
SYSTEM OPTIONSFOR DIFFERENT REQUIREMENTS
FiWaGuard - High Pressure
FiWaGuard - Low Pressure
SUPPRESS FIRE THE MOMENT IT STARTS
FiWaGuard -DLP(Direct Low Pressure)
FiWaGuard - DHP(Direct High Pressure)
FiWaGuard - ILP(Indirect Low Pressure)
FiWaGuard - IHP(Indirect High Pressure)
BEST TECHNOLOGY PTE LTD
5 Kaki Bukit Road 1, #03-03 Eunos Technolink, Singapore 415936
Email: [email protected]
Tel: 6747-5688 Fax: 6747-4688
Website: http://www.besttech.com.sg
Operating Pressure: 250 bar Agent: CO2/Inert Gas Applications: Class B/C fires
Operating Pressure: 28 bar Agent: Powder/LiquidApplications: Class A/B/C fires