fischertechnik ® interface connections. the serial interface connects the computer with the...
TRANSCRIPT
fischertechnik®
Interface Connections
The Serial Interface Connects the Computer
with the fischertechnik®
model.
02 04 06 08
01 03 05 07
The 9V power supply
connects here.
The USB cable connects here.
Interface
Output devices connect atM1 – M4.
Motor OutputsMotor
Lamp
Electromagnet
Buzzer
Solenoid Valve
Lamp Outputs
Lamp Output devices connect at
01 – 08 with one wire.
Motor
Lamp
Electromagnet
Buzzer
Solenoid Valve
One wire connects to the ground socket.
Digital Inputs connect at
I1-I8.
Digital Input ConnectionsPushbutton Switch(pressure sensor)
Phototransistor(light sensor)
Reed Switch(magnetic sensor)
Analog Input Connections
Analog Input Devices connect at
AX and AY.
Thermistor(temperature sensor)
Photocell(light sensor)
A Few Tips
Building models is fun when they work. This is why you should follow a few basic rules
• Work carefully.
• Check the movement of all parts.
• Use the interface test.– Before you start to write a program for a
model, you should test all parts that are connected to the Interface, using the interface test from the ROBO Pro software.
Interface Test
Prog Button
• Programs can be downloaded to the interface.
• Two programs can be stored in the Flash memory.
• Toggle between the two programs using the Prog Button.
Port Button
• This button can be used to toggle between the COM/USB or IR Ports.
• The light remains solid once you’ve selected the port.
Troubleshooting
• Interface Test
• Cables and Wiring
• Loose Connection– Loose plugs– Poor contact between wire and plug
• Short Circuits
• Programming Errors