first briefing bfc 4084 / bfc 32904 industrial training...

NUR SHAYLINDA MOHD ZIN

I n d u s t r i a l T r a i n i n g C o o r d i n a t o r FKAAS (PL IF )

Contact In fo & Announcement :

Emai l : [email protected]

Facebook : l i fkaas@gmai l . com

( id : Penye la ras Lat ihan Indust r i FKAAS)

Phone : 07 -456 4497

Webs i te : h t t p : / / f k a a s . u t h m . e d u . m y /

First Briefing BFC 4084 / BFC 32904 Industrial Training (LI)

mailto:[email protected]


http://webapp.uthm.edu.my/fkaas/

http://fkaas.uthm.edu.my/

CANDIDATE QUALIFICATIONS :

18/12/2013First Industrial Training Briefing FKAAS

Students who have completed a minimum of 60% of the total program

credits. The 60% credit or about 82 credits and above to qualify

students undergoing industrial attachment . The 60% credit is the

current total credit in this Semester I 2017/2018 session and will include

the number of credits registered on the next Semester II 2017/2018.

Students in 3BFF and 4BFF

Drop out Students

Special Case Students (With Permission)( need approval from LI coordinator)

Apart from the above are not allowed

Expected Number of Candidates ≈ 400

WHY YOU??? (the 3rd year students)


Purpose of Industrial Training


Industrial Perspective Industrial needs final year students as their man power

resource (future employee)

EAC (Accreditation) Point of View Process to increase the Final Year Project quality towards

research, development and commercialization (RnDnC). Mainrule of commercialization is the involvement of industry inresearch conducted by the university.

SO, Industrial needs or EAC??????????????????????????

About EAC


The Engineering Accreditation Council (EAC) is a delegatedbody by the Board of Engineers Malaysia as the onlyrecognized accrediting body for engineering degreeprogramme offered in Malaysia.

Civil Engineering programme in UTHM was accredited inApril 2011 and has been granted recognition for 5 years.

According to EAC, the Industrial Training course must beattended by third year students; therefore all students willget involved with industries during training and will bringback all the knowledge/information/networking/ problem-related from industries to be used in the university forresearch/final year project/ commercialization purposes.

SYNOPSIS OF INDUSTRIAL TRAINING

Students are required to undergo industrialtraining for 10 weeks in the field of civilengineering at the organization as determined bythe university and another 1 weeks at theuniversity for CQI session.

During 10 weeks period at the organization, eachstudent will be assessed by the supervisor of thefaculty (PF) and the industrial supervisor (PI).Another additional 1 weeks in the university, eachstudent will be assessed by the PF.

First Industrial Training Briefing FKAAS

SYNOPSIS OF INDUSTRIAL TRAINING(cont’)

This program will gives students exposure to asystematic and structured approach in civilengineering disciplines such as design,construction, consulting or research.

Students are given guidance on occupationalhealth and safety and work ethics in the industry.

Students are given the opportunity to participatedirectly in management, planning, budgeting,preparation of key documents / material andsupervision depends on the projects implementedin the industry.


SYNOPSIS OF INDUSTRIAL TRAINING(cont’)

Students will also have the exposure in a tense work environment with certain constraints that will enhance their mental and physical endurance.


INDUSTRIAL TRAINING GOALS

To provide training experience, working inthe industry by applying engineering disciplineto practical work in areas related to the design,construction, human resource planning,engineering management, budgeting,entrepreneurship, consultancy and research.

*Additional goal – Students are encouraged tobuild network with the industry and try to findchances for RnDnC opportunity with them.


INDUSTRIAL TRAINING OBJECTIVES

Direct exposure to the profession as well as applications in their respective fields.

Provide opportunities to communicate and collaborate with professionals from various fields.

Working experience in a professionalorganization.

To build creativity, technical skills, inter-personal and communication.

Establish and foster relationships with professionals outside the campus.


INDUSTRIAL TRAINING OUTCOMES

Apply knowledge of basic science and engineering in the industry.

Demonstrate technical expertise in civil engineering.

Adopt effective communication.

Applying the techniques, methods and skillsrequired in civil engineering, and easy to adjust to the needs of industry.Drafting reports and providing an effective commitment to the team or as individuals.


INDUSTRIAL TRAINING SYLLABUS

Practical training will be conducted at the companies, firms or government agencies that have been certified by the Office of University Relations and Industry (PHI), Universiti Tun Hussein Onn Malaysia.

Type of training will be given to students depend on the type of business the industry itself.

Aspects of civil engineering disciplines are expected to be emphasized to students: Design

Construction

Consultation

Research


INDUSTRIAL TRAINING SYLLABUS(cont’)

Industry exposure to students are as in the following aspects:

Work management

Planning

Entrepreneurship and assessment

The main documents / key

Project Supervision

Promotion of innovative ideas


SCOPE OF INDUSTRIAL TRAINING

Knowing the distribution of industrial and organizational tasks in the operation of daily work, planning, specifically duties and responsibilities of a civil engineer.

Know about planning procedures and be associated with construction work.

Carry out site investigation works and surveys of land for a project planning and preparation of simple reports and/or technical reports.

To carry out the work under review (survey) and analysis of specific data for the preparation of a project plan.

Conducting Environmental Impact Assessment study (EIA) for development project activities.


SCOPE OF INDUSTRIAL TRAINING(cont’)

Comprehensive plan for carrying out a development project.

Serving as a site engineer at a construction site projects such as buildings, highways, bridges, airport runways, water and water treatment plants and other waste.

Designing layout and structural plans for small projects such as housing, industrial areas, service centers, recreational projects, educational institutions, tourism centers and others.

Undertake the work to design a development project.

Carry out structural design work using the latest computer software


IMPORTANT!

Students are advised to do INVESTIGATION OF THE COMPANY

BACKGROUND before applying.

• To make sure the suitable scope of job training/exposure is given during the week of LI

It is recommended to find company with the same field as your final year project.


EVALUATION OF INDUSTRIAL TRAINING

Assessment of students is based on several important aspects during and after the training industry;

Current (8 – 10 weeks) industry practice will be evaluated on an ongoing basis by a supervisor (PI) which is appointed by industry and evaluated once by the faculty supervisor (PF) who are appointed by the Dean of the Faculty of Civil and Environmental Engineering during a visit to the industry.

After (1 weeks) the practical training will be evaluated from the final report writing and presentation, and bound to a panel of assessors.


INDUSTRIAL TRAINING ASSESSMENT

BIL SUPERVISOR MARK TOTAL

1 INDUSTRIAL SUPERVISOR (PI)

i. Student Performance Evaluation 25 %50 %

ii. Log Book Assessment 25 %

2 FACULTY SUPERVISOR (PF)

i. Technical Knowledge 10 %

50 %ii. Quality of Presentation 20 %

3 iii. Final Report Assessment 20 %

4 TOTAL 100 %

Examples of the scoring rubric


http://fkaas.uthm.edu.my/ >> click ‘students’ >>’useful link’>> ‘Latihan Industri’

Rubrik Penilaian Latihan Industri.pdf

http://fkaas.uthm.edu.my/

INDUSTRIAL TRAINING GRADE

Pass (HL) or Fail (HG)

Pass Marks ≥ 70 %

Failed if; Change the LI placement without the approval of the faculty

coordinator.

MINIMUM PERIOD must follow the course code, if less than theperiod they will be considered as FAILED (for industrial training,90% of attendance (of 10 weeks) is COMPULSORY to be passed(HL).

DO NOT send the report and log book LATER THAN the datespecified.

Any student who have been complained of having disciplinaryproblems such as poor attendance, indifference take hold, do notreport for duty, etc., will be investigated and if it is true, would beconsidered FAILED.


Please regularly

check FKAAS website

Official date: third semester’s holiday)

Duration: 10 weeks

Supervision: 2 times

Period of Supervision:1: Week 7-102: Week 11 for the CQI

interview

LI

(10W)

End of 1 July 2018 – 6

september 2018

CQI

(1W)

First week of Semester 1 2018/2019

INDUSTRIAL TRAINING INFORMATION


LI PLACEMENT PROCEDURES (OFFICIAL)

In each application, ONLY 3 companies are allowed, if you want to apply more, wait until you got replies from these companies (and being rejected);

Students are NOT RECOMMENDED to reject companies who already accepted your application ESPECIALLY if you are applying via IEM (Please keep a good name of the university)


schedule

../../../sesi20162017/meeting PHI 6 dec 2016/Slide Latihan Industri Pelajar UTHM first meeting.pdf

../../../sesi20162017/meeting PHI 6 dec 2016/JADUAL KERJA LI PHI SEM.3 20162017.pdf


PLEASE REGISTER E-LI (8/12/2017-6/1/2018)

https://eli.uthm.edu.my/eli/utama


(6/12/2017-5/3/2018)

(6/12/2017-5/2/2018)

(1/7/2018-6/9/2018)

CQI (first week sem 1 (20182019)

INTERNATIONAL LI


More information in E-LI

CIDB Green Card Sample

CIDB Green Card

Green Card Program is a security

program that requires all construction

personnel to undergo 'Safety and

Health Induction Course for

Construction Workers' during the

day. The participants will be

registered with the CIDB and the

Green Card. In addition participants

will also be provided safety manuals

and Takaful protection for free.First Industrial Training Briefing FKAAS

Special Reminder

Please refer all the ‘detail of work flow’ in log book

Make sure the company you chose has employees who have at least a Bachelor of Civil Engineering.

Prohibited from requesting/asking about any wages/ allowance/salary while you are undergoing industrial attachment.

Not recommended to reject the offer that you have requested – common issues (bad influence for UTHM)

Before applying, consider the matters associated such as accommodation, transport and others (DO NOT consider these AFTER your application)

DO NOT register the ‘Geomatic Camp’ course for June to September session.


SECOND BRIEFING FOR THE INDUSTRIAL TRAINING

Will be held before the study week in 2nd Semester 2017/2018.

Please see the announcement on LI board notice in the FKAAS website

Add FB Penyelaras Latihan Industri FKAAS

Any inquires please email [email protected] or call 07 4574497

DO NOT WHATAPPS MY PERSONNEL NUMBER



LIST OF LI 2012/2013 Committee


Chairman : Associate Prof. Dr. Aeslina Abd. Kadir

PLIF : Dr Nur Shaylinda Mohd Zin

Committee : Dr Goh Wan Inn

Pn. Nooraliza

Dr. Nizam Zakaria

Dr. Hairul

Dr Junaidah

ANY QUESTIONS?

THANK YOU

first briefing bfc 4084 / bfc 32904 industrial training...

Documents