1

Samsung TVF/W Upgrade Guide

Model : L3 & L4 Series- L330 : LN19A330J1D, LN22A330J1D

LN26A330J1D, LN32A300J1DLN32A330J1D, LN32A330J1NLN37A330J1D, LN40A330J1D

- L450 : LN19A450C1D, LN22A450C1DLN26A450C1D, LN32A450C1DLN37A450C1D, LN40A450C1D

Samsung Electronics

2

Step1. How to prepare the USB Memory Drive

2. Connect the USB Memory Drive

to the USB port of your PC.

Copy the file into the USB Memory Drive.

3. Go to the USB Memory Drive and then double click the file.

1. Save the firmware file into your computer.

File Name : L330 and L450 firmware.exe

4. Just press “Unzip” button. 5. Unzipping is in progress.

6. After completing, please press

“OK” and “Close” button.

7. 2 folders containing the firmware files

has been added to the USB memory drive.

* Folder Name :

T-CRLAUSC, T-HNRAUSC

8. Safely disconnect the USB memory drive

by right clicking the green check mark

on the taskbar and then left click

“Safely Remove”.

3

Step2. How to upgrade the Firmware

with the latest Version

1. Turn your TV on, and then insert

the USB Memory Drive containing

the firmware upgrade into the

WISELINK port.

2. Press the Menu button on your

Remote Control.

3. Go to Setup. On the Setup Menu,

select SW Upgrade, and then

press Enter or the arrow button

(▶) on your remote.

4. The TV scans the USB Memory

Drive.

※ ImportantIf the firmware version you downloaded from the Samsung websiteor received from Samsung is older than or has smaller versionnumber than the version on your TV, do not install it.

4

Step2. How to upgrade the Firmware

with the latest Version

5. The TV asks whether you want to

upgrade. Select Yes on the screen

, and then press the Enter button

on your remote.

6. The firmware upgrade starts.

7. After completing the firmware

upgrade, your TV turns off for

3 seconds and then turns back on.

8. Confirm that your TV has the new

firmware version,

Instructions to check the firmware

version is on the next page.

※ ImportantIf the firmware version you downloaded from the Samsung websiteor received from Samsung is older than or has smaller versionnumber than the version on your TV, do not install it.

5

Step3. How to check the Firmware Version

1. Press the Menu button on

your remote control 2. Go to Setup. On the Setup Menu,

select SW Upgrade.

3. Press the Info button on your

remote. The firmware version

appears at the bottom of your

screen.

TV F/W Version : XXXX

6

Firmware Upgrade Error Messages

1. If the USB Memory Drive was not inserted into WISELINK port.

2. If there are no files on USB Memory Drive.

3. If the firmware version on the USB Memory Drive is same

as your TV’s firmware version

7

Cautions

While upgrading is in progress :

Do not pull the USB Memory Drive out.

Do not unplug the power cable.

Do not turn the TV off.

※ Warning

Pulling the USB Memory Drive out or unplugging the power

cable will cause a firmware error or main board failure.