fire protection accreditation scheme -...
TRANSCRIPT
20 March 2014
Draft 2
Fire Protection Accreditation Scheme
Class: ‘Design’ and ‘Certify’
Consultation Paper
Draft 2 Consultation Paper ‘Design’ and ‘Certify’ 20 March 2014 2
© Fire Protection Association Australia 2012
Building 2, 31-47 Joseph St
Blackburn North
Victoria 3130
Ph: 03 8892 3131
Fax: 03 8892 3132
www.fpaa.com.au
Consultation Paper 2014: Draft 2
‘Design’ and ‘Certify’ Working Group
A Working Group has been set up to explore the elements for ‘design’ and ‘certify’ accreditation for
individuals in the fire protection industry.
The group comprises:
Bill Lea – FPA Australia Board
Christopher Summers – Christopher Summers & Associates
David Swinson – Fire Safety Consulting Pty Ltd
Rebecca Fullerton – Chubb Fire & Security
Rod Rolfe – Wormald
Scott Williams – FPA Australia
Matthew Wright – FPA Australia
Chris Wyborn – FPA Australia
Lauren St Clair – FPA Australia
Leo Mautone – FPA Australia
Denise Friend – FPA Australia
Note: ‘Design’ and ‘Certify’ are two distinct classes under FPAS.
For the purposes of this document, the content relates to both classes.
Draft 2 Consultation Paper ‘Design’ and ‘Certify’ 20 March 2014 3
Contents
1.0 Fire Protection Accreditation Scheme (FPAS) 4
2.0 ‘Design’ and ‘Certify’ class of accreditation 4
2.1 ‘Design’ and ‘Certify’ class of accreditation 4
2.2 Definition of ‘Design’ class of work 5
2.3 Definition of ‘Certify’ class of work 5
2.4 Categories in ‘Design’ and ‘Certify’ 6
2.5 Required Insurance coverage for ‘design’ and ‘certify’ 7
3.0 Pathways into the Scheme for individuals 8
3.1 Qualified Accreditation pathway 8
3.1.1 Conditions to Satisfy Qualified Accreditation Type 9
3.1.2 ‘Design’ and ‘Certify’ required qualification(s) to meet Qualified Accreditation 9
3.2 Experienced (transitional) Accreditation pathway 10
3.2.1 Conditions to Satisfy Experienced Accreditation Type 10
3.2.2 Criteria for experience evidence 10
3.3 Trainee (transitional) Accreditation pathway 12
3.3.1 Conditions to Satisfy Trainee Accreditation Type 12
3.4 Recognised Prior Learning (RPL) 12
3.5 Continuing Professional Development (CPD) 13
Draft 2 Consultation Paper ‘Design’ and ‘Certify’ 20 March 2014 4
1.0 Fire Protection Accreditation Scheme (FPAS)
FPA Australia introduced a voluntary accreditation scheme known as the Fire Protection
Accreditation Scheme (FPAS) in July 2013 for accrediting workers in the fire protection
industry.
The Scheme commenced by addressing the ‘inspect and test’ area of fire protection work
with the launch of the Inspect and Test class of accreditation. As this is now embedded
and working effectively, it is appropriate to extend accreditation to individuals undertaking
‘design’ and ‘certify’ work in the fire protection industry.
2.0 ‘Design’ and ‘Certify’ class of accreditation
The ‘design’ and ‘certify’ classes will accredit individuals who perform design and
certification of essential safety measures in the fire protection industry. Initially the
Scheme will focus on ‘design’ and ‘certify’ activities associated with the following essential
safety measures:
• Fire detection and alarm systems
• Sprinkler Systems
• Hydrant systems.
These will form the first categories available under the initial phase of the ‘design’ and
‘certify’ class of accreditation. It is proposed to implement these categories within the
first quarter of 2014. The ‘design’ and ‘certify’ classes under the Scheme may include
more categories in the future such as but not limited to ‘Exit and emergency lighting’ and
‘Fire compartmentation and protection of openings’ if required by regulators or industry
needs.
2.1 ‘Design’ and ‘Certify’ class of accreditation
FPAS has five (5) individual accreditation classes of work that cover the different work
activities undertaken within the fire protection industry. These five classes of work are:
Stage 2 Stage 2 Stage 1
Launched
Since July 2013, the Scheme has only covered the ‘inspect and test’ class (stage 1) of fire
protection work. This next accreditation development stage covers the ‘design’ and ‘certify’
classes (stage 2).
Draft 2 Consultation Paper ‘Design’ and ‘Certify’ 20 March 2014 5
2.2 Definition of ‘Design’ class of work
The ‘Design’ class of work covers designs to a required standard where the finished design
documentation outlines required design criteria and the documentation provided is
suitable for procurement / manufacture / construction / installation / commissioning by
competent personnel.
The ‘design’ class includes the following activities:
• developing a design brief;
• analysing the design requirements;
• researching products and design solutions;
• specifying requirements of a design solution and products to meet design
requirements;
• conceptualising and documenting design solutions;
• validating that the design solution meets the required design;
• finalising documentation for the procurement, manufacture, construction and
installation, commissioning and maintenance on the equipment relating to the
system designed, to ensure the system meets all design and installation criteria at
the time of certification. Such documentation would consist of:
- system design calculations
- system required reference data such as pressure gauge schedules, interface
cause and effect diagrams
- manufacturing drawings such as CIEs, bracketing/supports, pipework and
- construction drawings.
2.3 Definition of ‘Certify’ class of work
The ‘Certify’ class of work covers the formal validation and certification that states the
properties and performance of an installed and commissioned system fulfil the specific
requirements of the approved design.
Note: When the approved design includes an Alternative Solution or other variation to
Deemed-to-Satisfy provisions or other locally prescribed requirements, individuals
undertaking the certify function are expected to acknowledge this and exempt such works
from certification pending endorsement from the relevant approval authority which may
include the fire safety engineer, relevant fire authority or project Building Surveyor.
This process is the initial system certification of the installed system and is not the annual
post construction certification process whereby a practitioner validates that the installed
system is still capable of performing to the original design/installation requirements.
Draft 2 Consultation Paper ‘Design’ and ‘Certify’ 20 March 2014 6
The ‘certify’ class includes the following activities:
• reviewing and analysing the design and installed/constructed system to ensure it
fulfils the requirements of the approved design;
• researching the products installed and the design solutions used;
• verifying that the design solution and products, do meet design/installation
requirements;
• verifying that the system products and equipment were constructed and installed in
accordance with finalised and approved version of design documentation and are fit
for purpose;
• commissioning procedure and performance results that validate system
performance to required standards; and documentation that supports required
evidence that the system meets all design and future maintenance criteria, so that
certification of the system can be issued.
Note: The FPAS ‘Design’ and/or ‘Certify’ accreditation does not absolve the individual or company
from satisfying any other relevant legislative or licensing requirements applicable to the
design or certification of fire protection systems.
2.4 Categories in ‘Design’ and ‘Certify’
Fire protection designers and/or certifiers are accredited under the Scheme to carry out
work in either ‘Design’ and/or ‘Certify’ for one (1) or more categories of fire protection
work. Individuals can be accredited in more than one (1) category for a class.
The individual must be evaluated and deemed competent to be accredited in a category of
either the ‘Design’ and/or ‘Certify’ Class.
The initial ‘Design’ and ‘Certify’ categories that have been identified for the roll out of the
first phase of ‘design’ and ‘certify’ accreditation are shown in the following table. The
working group will determine additional categories during the second phase of the
accreditation roll out.
Table 1: ‘Design’ and ‘Certify’ Categories
Category Design Class Certify Class
1 Fire sprinkler systems ���� ����
2 Fire hydrant and hose reel systems ���� ����
3 Fire detection and alarm systems ���� ����
Draft 2 Consultation Paper ‘Design’ and ‘Certify’ 20 March 2014 7
2.5 Required Insurance coverage for ‘design’ and ‘certify’
Accredited personnel undertaking design and/or certification work are required to be
covered by both Public Liability and Professional Indemnity insurance that is appropriate
to the fire protection services they undertake.
When applying for accreditation an individual must provide documentation that verifies he
or she (or the company he or she is engaged by) is covered by Public liability and
Professional Indemnity insurance and that the level of cover is appropriate to the fire
protection services he or she provides. This is also a requirement when renewing
accreditation.
An applicant applying for accreditation (or the company they are engaged by) must hold
Public Liability and Professional Indemnity that meets the following minimum
requirements:
• covers the applicant for work he or she undertakes in the accreditation category for
which he or she is applying.
• is not part of a ‘Shared Policy’ where members have equal access to the policy yet
the policy only covers one significant event or claim within the insured year (this type
of policy may not have sufficient funds to support all claim(s) by members within a
year).
• has a minimum insurance of $10 million for Public Liability and $2 million for
Professional Indemnity.
• details a ‘Run-Off’ policy that exists for six (6) years following cessation of trade or
cancellation of accreditation (to cover the statute of limitation period of which civil
action could be brought against the individual).
Draft 2 Consultation Paper ‘Design’ and ‘Certify’ 20 March 2014 8
3.0 Pathways into the Scheme for individuals
As with the ‘inspect and test’ class of accreditation, the proposed ‘Design’ and ‘Certify’
classes will have three (3) individual accreditation pathways for entry into the Scheme:
1. Qualified
2. Experienced (transitional) and
3. Trainee (transitional).
The Experienced and Trainee pathways provide transitional accreditation arrangements for
individuals and allow transition time for the required units of competency to be attained.
The figure below shows the pathways for Experienced (transitional) and Trainee
(transitional) individuals to transition to Qualified Accreditation.
Draft 2 Consultation Paper ‘Design’ and ‘Certify’ 20 March 2014 9
3.1 Qualified Accreditation pathway
Qualified Accreditation refers to an individual who holds the approved qualification(s) for
a specific category of work activities.
Table 2: Qualified Accreditation pathway
Accreditation Type Conditions to Satisfy Accreditation Type
Qualified
• Holds required Qualification(s).
• Provides sufficient evidence of two (2) years’ relevant experience in the
category applied for.
• Holds required insurance.
• Signs the Code of Conduct.
• Accreditation fee paid.
• Application approved by FPA Australia.
3.1.1 Conditions to Satisfy Qualified Accreditation Type
• Holds the required qualification(s) in the categories of ‘Design’ and/or ‘Certify’ work
applied for.
• Provides sufficient and relevant evidence of two (2) years design and/or certification
experience in the fire protection industry (including specific examples of work
completed).
• Provides verification through documentation that he or she (or the company he or
she is engaged by) holds the required insurance covering the nominated scope of
work. See insurance requirements on page 7.
• Signs the Code of Conduct.
• Accreditation fee paid and application approved by FPA Australia.
3.1.2 ‘Design’ and ‘Certify’ required qualification(s) to meet Qualified Accreditation
An individual applying for ‘design’ and ‘certify’ accreditation is required to hold an
appropriate qualification or deemed equivalent qualification plus the relevant units of
competency for the category of ‘design’ and ‘certify’ work applied for.
Appropriate available qualifications will be determined under the Scheme and could
include for example: a Diploma of Fire System Design, Diploma in Fire Technology and
Certificate IV in Fire Technology, Certificate IV in Plumbing and Services (including
identification of any competency gaps in current qualifications).
Draft 2 Consultation Paper ‘Design’ and ‘Certify’ 20 March 2014 10
3.2 Experienced (transitional) Accreditation pathway
Experienced (transitional) Accreditation refers to an individual who has relevant
engineering work experience in the category of fire protection in ‘Design’ and/or ‘Certify’.
Table 3: Experienced Accreditation pathway
Accreditation Type Conditions to Satisfy Accreditation Type
Experienced
• Provides sufficient evidence of four (4) years relevant design and/or
certification experience in the fire protection industry.
• Holds required insurance.
• Attends a mandatory FPA Australia course and assessment.
• Agrees to transitional accreditation and transitions to Qualified
Accreditation within four (4) years.
• Signs the Code of Conduct.
• Accreditation fee paid.
• Application approved by FPA Australia.
Note: The four (4) year transition period is set from the accreditation approval date.
3.2.1 Conditions to Satisfy Experienced Accreditation Type
• Provides sufficient, relevant and recent evidence including specific examples of four
(4) years design and/or certification experience in the fire protection industry as
detailed in 3.2.2 Criteria for experience evidence.
• Provides verification through documentation that he or she (or the company he or
she is engaged by) holds the required insurance covering the nominated scope of
work. See insurance requirements on page 7.
• Attends a mandatory FPA Australia course and assessment. An example of the
content that could be included in the training course: legislative landscape; primary
and secondary referencing standards; key stakeholders roles and responsibilities;
results presentation; approved forms; and end of day assessment.
• Agrees to transition from Experienced to Qualified Accreditation within four (4) years
from accreditation approval date.
• Signs the Code of Conduct.
• Accreditation fee paid and application approved by FPA Australia.
3.2.2 Criteria for experience evidence
Time Duration for experience
The individual must provide evidence of having spent a minimum of four (4) years in the
fire protection industry undertaking ‘design’ and/or ‘certify’ activities in the category for
which they are applying.
Draft 2 Consultation Paper ‘Design’ and ‘Certify’ 20 March 2014 11
This four (4) year minimum period does not have to be continuous (i.e. the minimum time
in the industry can be accrued over a number of periods) providing that the evidence
details a minimum of recent experience of at least eighteen (18) months within the last
three (3) years from the date of the application, to ensure currency in industry practices.
Documented Vocational Experience
Sufficient evidence of experience is to be provided by the applicant in one (1) or more of
the categories for either ‘Design’ and/or ‘Certify’ and substantiated by supporting
documents and information. Confirmation of applicable work experience can be identified
by documentation that demonstrates work performed including the:
• Types of fire protection systems, equipment and components worked on.
• The role of the applicant in the work and a clear description of what work was
undertaken.
• Documentation relating to the work performed that covers ‘design’ and/or ‘certify’
activities.
The evidence of experience also needs to identify recent and relevant work and
workplace locations, for each accreditation category applied for, and needs to be
substantiated by managers, supervisors and/or appropriate referees.
The type of documentation and weighting of evidence to meet minimal requirements is
detailed in Table 4 below. All documents must be certified copies of original documents.
Table 4: Acceptable evidence documentation
Criteria
‘Design’ Category ‘Certify’ Category
Acceptable documents are listed below: Acceptable documents are listed below:
Time duration
Documents that details work role as a
designer:
• Work history over the required periods
• Job description relating to work history
• Third party validation/referee.
Documents that details work role as a
certifier:
• Work history over the required periods
• Job description relating to work history
• Third party validation/referee.
System
requirements
• System design calculations such as
hydraulics, alarm system current, loop
length voltage drops.
• For construction 2D drawings.
• Manufacturing drawings for CIEs,
pipework or support drawings.
• Deemed to Satisfy design criteria baseline
data check sheets points that they
validated for their work.
• Certification system report detail
compliance and noncompliance of system
issues/defects.
Compliance
Documentation relating to design meets
Deemed to Satisfy (DTS) requirements:
• Certification of design.
• Report on design criteria validations and
assumptions.
• Commissioning documentation.
• Certification documentation.
Draft 2 Consultation Paper ‘Design’ and ‘Certify’ 20 March 2014 12
3.3 Trainee (transitional) Accreditation pathway
Trainee (transitional) Accreditation refers to an individual working under supervision in
the fire protection industry whilst undertaking approved formal learning.
Table 5: Trainee Accreditation pathway
Accreditation Type Conditions to Satisfy Accreditation Type
Trainee
• Limited to working only under direct supervision of an individual who is
accredited as Qualified or Experienced (transitional).
• Agrees to transitional accreditation and transitions to Qualified
Accreditation within four (4) years and enroll in a course recognised under
FPAS.
• Engaged by a company that holds required insurance and undertakes the
fire protection work in the accreditation category applied for.
• Signs the Code of Conduct.
• Accreditation fee paid.
• Application approved by FPA Australia.
3.3.1 Conditions to Satisfy Trainee Accreditation Type
• Provides required employment details and agrees to work under supervision when
undertaking ‘design’ and/or ‘certify’ activities relevant to accreditation category.
• Agrees to transition from Trainee to Qualified Accreditation within four (4) years of
the accreditation approval date and can provide evidence of enrolment in a course
recognised under FPAS and relating to trainee accreditation category.
• Provides verification through documentation that he or she (or the company he or
she is engaged by) holds the required insurance covering the nominated scope of
work. See insurance requirements on page 7.
• Signs the Code of Conduct.
• Accreditation fee paid and application approved by FPA Australia.
Note: The four (4) year transition is set from the accreditation approval date.
3.4 Recognised Prior Learning (RPL)
Under the Scheme, an individual who has many years’ experience in ‘design’ and / or
‘certify’ work in the fire protection industry and therefore a level of knowledge and skills in
a particular work activity, is able to undertake Recognition of Prior Learning (RPL) at a
Registered Training Organisation (RTO) and possibly gain credit towards a qualification.
RPL is a process in the vocational education and training sector that reviews an individual’s
prior experience through work, formal training and other life experiences and, depending
Draft 2 Consultation Paper ‘Design’ and ‘Certify’ 20 March 2014 13
on a person’s current ability, enables an individual to go directly to assessment by a
qualified workplace assessor. RPL is also known as an Assessment Only process.
3.5 Continuing Professional Development (CPD)
Maintaining skills and knowledge in the workplace through continuing professional
development (CPD) programs is considered essential for practitioners and professionals in
many fields.
CPD activities in the fire protection industry enable an individual to update and maintain
technical competence and effectiveness in the workplace. CPD activities can include
formal study, short courses, workshops, seminars and discussion groups, conferences,
technical meetings, learning in the workplace and private study.
Under the Scheme, CPD commitment by an individual will be a requirement of
accreditation and renewal, so that an individual is up-to-date with current work practices
in the fire protection industry and in the accredited ‘design’ and ‘certify’ category.