finishpro 10 - tesoro en maderas · 8 a100629 2.6m headless galv plain clamshell ¾ a100759 2.6m...

23 Gauge

1½

ApplicationsCabinet doors, small trim, glazing bead, carvings and ornamentals, picture frames, birdhouses, beehive assembly

Features and Benefits• Easy fastener length adjustment – Quickly adjusts to

desired fastener length • Hardened alloy steel driver – For durability• Rear exhaust – Directs oil and dust away from work

surface• Smooth metal cap & magazine – For durability and

protectionof work materials• Soft grip – For comfort and control• Extra power – For use with hard wood• Low load alert – Visible fastener load with reload

indicator• Heavy-duty body• One year warranty• Includes case, fittings, repair tools and tool oil

Fastener SpecificationsCapacity . . . . . . . . . . . . . . . . . . 110Gauge . . . . . . . . . . . . . . . . . . . . 23Range . . . . . . . . . . . . . . . . . . . . ½" – 1"

SpecificationItem# . . . . . . . . . . . . . . . . . . . . 2C0001NMode of Operation. . . . . . . . . . . . Single ActivationHose Fitting . . . . . . . . . . . . . . . . 1/4" NPTTool Weight . . . . . . . . . . . . . . . . 2.35 lbs (1.1 kg)Height: . . . . . . . . . . . . . . . . . . . 6¾" (171 mm)Length: . . . . . . . . . . . . . . . . . . . 87/8" (225 mm)Lip Length . . . . . . . . . . . . . . . . . 5/8" (16 mm)Range . . . . . . . . . . . . . . . . . . . . ½" – 1" Gauge . . . . . . . . . . . . . . . . . . . . 23Reg. Operating Pressure: . . . . . . 70-95 psi (4.8-6.5 bar)Pin Capacity . . . . . . . . . . . . . . . . 110

This lightweight Micro Pinner is the perfect tool for all of your intricate finish and trim remodeling projects. The micro pins fasten the smallest of decorative trim securely and leave a nearly invisible hole–no splitting or puttying. The FinishPro 10 drives 1⁄2" – 1", 23 gauge micro pins.

FinishPro®10

Safety First. The only way to work. Safety First. The only way to work. | 800-543-4596 | www.senco.com | ©2012 Senco Brands, Inc.

23 Gauge Micro Pinner

SENCO® 23 Ga. Straight Strip Micro PinsPins fasten the smallest of trim securely leaving a nearly invisible hole. CartonLength Item Code Count Head Finish Coating Package

LIMITEDWARRANTY

½ A100509 2.6M Headless Galv Plain Clamshell

5⁄8 A100629 2.6M Headless Galv Plain Clamshell

¾ A100759 2.6M Headless Galv Plain Clamshell

1 A101009 2.6M Headless Galv Plain Clamshell

Variety A109809 2.5M Headless Galv Plain Clamshell

½ CZ08EAAB 15.5M Headless Galv Plan Box

5⁄8 CZ10EAAB 15.5M Headless Galv Plan Box

¾ CZ11EAAB 15.5M Headless Galv Plan Box

1 CZ013EAAB 15.5M Headless Galv Plan Box

FinishPro®10

Easy-open latch

Rubber bumper toprotect work surface

Fastener length adjustmentguide with multiple settings

Metal magazinefor added durability

Smooth metal capComfort Grip

Heavy-duty body.

Rear exhaust to protect work surface

Low load indicator

Choose the right actuation model!

Contact Actuation Trigger (also known as dual action, bounce or bottom �re) operates in the following sequence- pull the trigger �rst and keep the trigger pulled while moving the tool along the work surface with a bouncing motion, depressing the safety element at the nose of the tool against the work surface where the fastener is to be driven. This trigger is recommended for use by trained professionals only in high production or volume applica-tions.

Sequential Actuation Trigger (also known as restrictive trigger or trigger �re) operates in the following sequence - depress the safety element at the nose of tool against the work surface then pull the trigger. After each fastener is driven, release the trigger and lift the tool o� the work surface before starting the sequence again. This trigger is recommended and acceptable for most applications.

For additional information on how SENCO will save you time, reduce costs, and increase quality, call us at 1-800-543-4596 to �nd your nearest Authorized Senco Dealer or Distributor or visit our web site at: www.senco.com

Safety First. The only way to work. | 800-543-4596 | www.senco.com | ©2012 Senco Brands, Inc.

MEMBER

FinishPro 10 ®

23 ga. Micro Pinner

* Schematic drawing inside NF

G02

C R

evis

ed J

uly

26, 2

007

(Rep

lace

s 7/

14/0

6)

© 2

001,

200

7 by

SE

NC

O P

rodu

cts,

Inc.

Cin

cinn

ati,

Ohi

o 45

244

- U

.S.A

.

YK0397Repair Kit

Senco Products, Inc.8485 Broadwell RoadCincinnati, Ohio 45244Visit our Website www.senco.com

Questions? Comments? call SENCO's toll-free Action-line:1-800-543-4596 (North & South America only)or e-mail: [email protected]

SM

3/8"Body

1/4"Body

Tru-Flate 1/4" NPT

Tru-Flate 1/4" NPT

Ind. Interchange 1/4" NPT

Ind. Interchange 1/4" NPT

PC0486

PC0474

1/4"Body

3/8"Body

Plugs shown smaller than actual size

Available Plugs(Not Included with Tool)

2C0001N Single Actuation w/case2C1001N Single Actuation w/case2C1002N Single Actuation2C2001N Single Actuation w/case2C3001N Single Actuation w/case2C3002N Single Actuation

Tool # Model

FinishPro 10®

HC0509

HC0508

EA0177

BC0583

BC0571

BC0575

LB1102

BC0574

KB6425

BC0585

KB6422

GC1132

KB6412

KB6411 FC0595

KB6426

GC1114

KB6418

LB1100

2C0001N Single Actuation (US)2C1001N Single Actuation (Japan)2C1002N Single Actuation (Japan)2C2001N Single Actuation (EU)2C3001N Single Actuation (AU)2C3002N Single Actuation (AU)

Tool # Model

HG0191HG0193

HG0192HG0191

GC1129GC1131

GC1130GC1129

KB9839

KB9839GC1099

KB6417

GC1105

KB6413

KB6413

KB6430

AC0373

GC1095

KB3599

KB6427

BC0578

LB1094

BC0582

LB1098

AC0376

KB9839

KB6412

AC0372

GC1116

AC0379

KB9830

KB9839LB1096

BC0581

LB1096

AC0369

HC0503

GC0902

BC0577

FC0579

NFG0

2C R

evis

ed J

uly

26, 2

007

(Rep

lace

s 7/

14/0

6)

© 2

001,

200

7 by

SEN

CO P

rodu

cts,

Inc.

Cin

cinn

ati,

Ohio

452

44 -

U.S.

A.

A B

FinishPro 10®

A

B

PC0479 4

PC0468 4

4 Recommended Plugs

HA0160

FinishPro ®10 Micro Pinner

REPLACEMENT PARTS LIST • LISTA DE PARTES DE REPUESTO • ERSATSTEILE-LISTE • LISTE DE PIÈCES DE RECHANGE

Questions? Comments? call SENCO’s toll-free Action-line: 1-800-543-4596 (North & South America only) or e-mail: [email protected]

PART NO. DESCRIPTION DESCRIPCIÓN BESCHREIBUNG DÉSIGNATION

AC0369...............MUFFLER ..........................................SILENCIADOR .................................................DÄMPFER ...........................................................SILENCIEUXAC0372 ..............SEAL .................................................SEAL ...............................................................DICHTUNG ..........................................................JOINTAC0373 ..............SEAL .................................................SEAL ...............................................................DICHTUNG ..........................................................JOINTAC0376 ..............CAP ..................................................TAPA ................................................................KAPPE ................................................................BOUCHONAC0379 ..............COVER ..............................................CUBIERTA .......................................................CUBIERTA ABDECKUNG .....................................COUVERCLEBC0571 ..............CYLINDER ........................................CILINDRO ........................................................ZYLINDER ..........................................................CYLINDREBC0574 ..............RETAINER .........................................JUNTA TÓRICA ...............................................SICHERUNGSRING .............................................RETENUEBC0575 ..............STOP ................................................TOPE ...............................................................PUFFER ...............................................................ARRÊTBC0577 ..............BUSHING ..........................................CASQUILLO ....................................................HÜLSE ................................................................DOUILLEBC0578 ..............SEAL .................................................SEAL ...............................................................DICHTUNG ..........................................................JOINTBC0581 ..............TUBE .................................................TUBO ..............................................................RÖHRE ................................................................TUBEBC0582 ..............VALVE ...............................................VÁLVULA .........................................................VENTIL ...............................................................VALVEBC0583 ..............VALVE ...............................................VÁLVULA ........................................................VENTIL ................................................................VALVEBC0585 ..............VALVE ...............................................VÁLVULA ........................................................VENTIL ................................................................VALVEEA0177 ..............PISTON ASSEMBLY ..........................PISTON ASSEMBLY ........................................KOLBEN-ZUSAMMENBAU ..................................ENSEMBLE PISTON –COUTEAUFC0579 ..............PLATE ...............................................PLACA ............................................................PLATTE ................................................................PLAQUEFC0595 ..............PLATE ...............................................PLACA ............................................................PLATTE ...............................................................PLAQUEGC0902 ..............RETAINER .........................................JUNTA TÓRICA ...............................................SICHERUNGSRING .............................................RETENUEGC1095 ..............PIN ...................................................PASADOR ........................................................STIFT ..................................................................GOUPILLEGC1099 ..............BRACKET ..........................................SOPORTE ........................................................HALTERUNG .......................................................SUPPORT DE FIXATIONGC1105 ..............FEEDER SHOE ...................................ALIMENTADOR ...............................................NAGELSCHIEBER ...............................................POUSSOIRGC1114 ..............GUIDE ...............................................GUÍA ...............................................................FÜHRUNG ...........................................................GUIDEGC1116 ..............LATCH ..............................................UÑETA .............................................................VERSCHLUSS .....................................................DOIGT DE RETENUEGC1129 (US)......MAGAZINE .......................................CARGADOR ....................................................MAGAZIN ............................................................MAGASINGC1130 (Euro)....MAGAZINE .......................................CARGADOR ....................................................MAGAZIN ............................................................MAGASINGC1131 (Japan)..MAGAZINE .......................................CARGADOR ....................................................MAGAZIN ............................................................MAGASINGC1132 ..............PLATE ..............................................PLACA ............................................................PLATTE ...................................... .........................PLAQUEHA0160 ..............TRIGGER ASSEMBLY.......................ASAMBLE DE GATILLO ..................................AUSLÖSER-ZUSAMMENBAU ...............................ENSEMBLE GÂCHETTEHC0503 ..............TRIGGER PIN ...................................PASADOR ........................................................STIFT ..................................................................GOUPILLEHC0508 ..............TRIGGER ..........................................GATILLO ..........................................................AUSLÖSER .........................................................GÂCHETTEHC0509 ..............SEAL .................................................SEAL ...............................................................DICHTUNG ..........................................................JOINTHG0191(US)........LABEL ..............................................ETIQUETA ........................................................AUFKLEBER ........................................................ÉTIQUETTEHG0192(Euro).....LABEL ...............................................ETIQUETA .......................................................AUFKLEBER ........................................................ÉTIQUETTEHG0193(Japan)...LABEL ...............................................ETIQUETA .......................................................AUFKLEBER ........................................................ÉTIQUETTELABEL KB3599 ..............RETAINER .........................................JUNTA TÓRICA ...............................................SICHERUNGSRING .............................................RETENUEKB6411 ..............SCREW .............................................TORNILLO .......................................................SCHRAUBE .........................................................VISKB6412 ..............SCREW .............................................TORNILLO .......................................................SCHRAUBE .........................................................VISKB6413 ..............SCREW .............................................TORNILLO .......................................................SCHRAUBE .........................................................VISKB6417 ..............NUT ..................................................TUERCA ...........................................................MUTTER .............................................................ECROUKB6418 ..............WASHER ...........................................ARANDELA .....................................................SCHEIBE .............................................................RONDELLEKB6422 ..............PIN ...................................................PASADOR ........................................................STIFT ..................................................................GOUPILLEKB6425 ..............SPRING ............................................RESORTE ........................................................FEDER .................................................................RESSORTKB6426 ..............SPRING ............................................RESORTE ........................................................FEDER .................................................................RESSORTKB6427 ..............SPRING ............................................RESORTE ........................................................FEDER .................................................................RESSORTKB6430 ..............SPRING ............................................RESORTE ........................................................FEDER .................................................................RESSORTKB6431 ..............SPRING ............................................RESORTE ........................................................FEDER .................................................................RESSORTKB9830 ..............SCREW .............................................TORNILLO .......................................................SCHRAUBE .........................................................VISKB9839 ..............WASHER ...........................................ARANDELA .....................................................SCHEIBE .............................................................RONDELLELB1094 ..............SEAL .................................................SEAL ...............................................................DICHTUNG ..........................................................JOINTLB1096 ..............SEAL .................................................SEAL ...............................................................DICHTUNG ..........................................................JOINTLB1098 ..............SEAL .................................................SEAL ...............................................................DICHTUNG ..........................................................JOINTLB1100 ..............SEAL .................................................SEAL ...............................................................DICHTUNG ..........................................................JOINTLB1102 ..............SEAL .................................................SEAL ...............................................................DICHTUNG ..........................................................JOINT

BRNA070 Revised May 9, 2007(Replaces 11/27/06)

© 2000, 2007 by Senco Products, Inc.

FinishPro

®15

FinishPro

®18

Operating InstructionsInstrucciones de Operacion

Mode d’Emploi

Questions? Comments?call SENCO’S toll-free Action-line: 1-800-543-4596or e-mail: [email protected] www.senco.com

Warnings for the safe use of this tool are included in this manual.Los avisos para el uso seguro de esta herramienta están incluidos en este manual.Les consignes pour l’utilisation en toute sécurité de cet outil se trouvent dans ce manuel.

FinishPro

®10

Senco Products Inc.8485 Broadwell Road

Cincinnati, Ohio 45244

TABLE OF CONTENTS

Tool Use 2Maintenance 6Accessories 7Options 7Troubleshooting 8Specifications 9

2

English Español Français

Tool Use Uso de la Herramienta Utilisation de l’Outil

TABLA DE MATERIAS

Uso de la Herramienta 2Mantenimiento 6Accesorios 7 Opciones 7IdentificacióndeFallas 8Especificaciones 9

TABLE DES MATIERÈS

Utilisation de l’outil 2Entretien 6Accessoires 7 Options 7Dépannage 8Spécifications 9

l Read and understand “SAFETY INSTRUCTIONS” manual shipped with this tool before using tool.

l Antes de usar la herramienta lea y comprenda el manual “INS-TRUCCIONES DE SEGURI-DAD” despachado con ella.

l Lisez et assimilez le manuel “INSTRUCTIONS DE SéCU-RITé” livré avec cet outil avant de l’utiliser.

EMPLOYER’S RESPONSIBILITIES

Employer must enforce compliance with the safety warnings and all other instructions which accompany this tool as shipped from the manufacturer.

Keep this manual avail-able for use by all people assigned to the use of this tool.

For personal safety and proper operation of this tool, read and understand all of these instructions carefully.

RESPONSABILIDADES DEL EMPLEADOR

El empleador debe hacer cumplir las advertencias de seguridad y todas las otras instrucciones que acompañan a esta herramienta como se la despacha desde el fabricante.

Mantenga este manual dispo-nible para que lo usen todas las personas destinadas a ha-cer uso de esta herramienta.

Por razones de seguridad per-sonal y la adecuada operación de esta herramienta, lea y comprenda todas estas in-strucciones cuidadosamente.

RESPONSABILITÉS DE L’EMPLOYEUR

L’employeur doit faire ap-pliquer les consignes de sécurité et toutes les autres instructions qui accompag-nent cet outil tel qu’il est livré par son constructeur.

Ayez ce manuel à la dispo-sition de toutes lespersonnes chargées d’utiliser cet outil.

Pour assurer la sécu-rité personnelle et le bon emploi de cet outil, lisez et assimilez soigneusement toutes ces instructions.

3



LS1 l Set magazine height adjust-ment lever (A) before loading fasteners.

lColoqueenposicióncorrectalapalanca de ajuste de la altura del cargador antes de cargarlo con clavos.

l Positionnez le levier de réglage de hauteur du magasin avant chargement des projectiles.

15

25

20

AZ13

AZ11AZ08

A

15

25

20

AY13

AY11AY10

A

25

38

30

AX17

AX15AX13

A

LS5

LS2

l Set magazine height adjust-ment lever (A) before loading fasteners.

l Coloqueenposicióncorrectalapalanca de ajuste de la altura del cargador antes de cargarlo con clavos.


l Set magazine height adjust-ment lever (A) before loading fasteners.

l Coloqueenposicióncorrectalapalanca de ajuste de la altura del cargador antes de cargarlo con clavos.


OLD STYLE LS

NEW STYLE LS

AZ13

AZ11AZ08

(INVERT RAIL)

l Begin magazine height adjust-ment by pressing down on the rail latch, then slide the rail out, and rotate the rail stop to com-pletely remove the rail.

l The latch lever must be squeezed to remove the height adjustment rail from the top position.

There are positions for each dif-ferent fastener length.

l Using pliers, set the adjust-ment rail position for the proper fastener.

l Comience el ajuste de altura del cargador presionando hacia abajo el cerrojo del carril, luego deslice el carril hacia afuera y haga girar su tope hasta extraer el carril por completo.

l Para retirar el carril de ajuste de alturadesdelaposiciónsupe-rior, se debe apretar el pestillo.

Existen posiciones para cada longitud diferente de sujetador.

lMedianteunapinza,fijelaposicióndelcarrildeajusteparael sujetador que corresponda.

l Commencez le réglage de hauteur en enfonçant le ver-rouillage de rail, plus glissez le rail et pivotez l’arrêt de rail pour enlever complètement le rail.

l Le levier de verrouillage doit être pressé pour enlever le rail de réglage de hauteur de sa posi-tion supérieure.

Il y a des positions correspon-dant aux différentes longueurs d’agrafes.

l En utilisant des pinces, réglez la position de rail pour les attaches à utiliser.

4

l To Load: Place strip of fasteners into

magazine with points resting on fastener guide. Use only genuine SENCO fasteners. Do not load with safety element or trigger depressed.

l Para Cargar: Coloque la tira de clavillos den-

tro de la carrillera con la punta descansando sobre la guía. Use solo sujetadores SENCO genui-nas. No cargue con el disparo o la seguridad oprimidos.

l Pour charger : Insérer la bande de projectiles

dans le magasin en s’assurant que les pointes soient posées contre le guide inférieur. Utiliseruniquementdesfinettesd’origine SENCO. Vielles à ne pas appuyer sur la détente ou sur le palpeur de sécurité quand vous chargez.

FinishPro®10 l This tool is equipped with a second-ary trigger. Position tool against work surface,usingthemiddlefinger,pull the secondary trigger clear of the primary trigger. Then, using the firstfinger,pulltheprimarytriggertoactuate the tool.

NOTE: This tool is not required to have a workpiece contact. USE CAUTION tool will drive a fastener when the primary trigger is pulled.

FinishPro®2N1/15/18

l Esta herramienta está provista de un gatillo secundario. Coloque la her-ramientacontralasuperficiedetrabajo,usandoeldedocorazón,jaleelgatillosecundario alejándolo del gatillo principal. Después, use el dedo índice para jalar el gatillo principal y activar la herramienta.

NOTA: Esta herramienta no necesita estar en contacto con la pieza de tra-bajo. SEA PRECAVIDO, la herramienta disparará una grapa al jalar el gatillo principal.

l Cet outil est muni d’une seconde détente. Placer l’outil sur la surface, tirer sur la seconde détente avec le doigt du milieu pour la séparer de la première. Puis tirer sur la détente principale avec le premier doigt pour actionner l’outil.

REMARQUE: Cet outil n’a pas à toucher la surface de travail. FAIRE ATTENTION car l’outil lance une agrafe lorsque la détente principale est tirée.



l Push rail forward until it latches. l Empuje el carril hacia adelante hasta cerrario.

l Pousser le rail jusqu’a encliqu-etage.

l Place strip of fasteners into magazine with points facing direction shown. Direction of points on headless pins is marked on side of strip. Use only genuine SENCO fasteners. Do not load with trigger depressed.

l Coloque la tira de clavitos en el cargador con las puntas viendohacialadirecciónquesemuestra.Ladireccióndelaspuntas en los clavitos sin cabeza esta marcada sobre el lado de las tiras. Use solo sujetadores SENCO genuinas. No cargue con el gatillo oprimidos.

lInsérerlabandedefinettesdansle magasin avec les pointes dans la direction indiquée qui, pour lesfinettessanstête,apparaitsur le côté de la bande. Utilisez uniquementdesfinettesd’origineSENCO. Vielles à ne pas ap-puyer sur la détente quand vous chargez.

FinishPro®10 / LS

l (1) Slide adjuster to correct fastener length. Connect tool to air supply. (2) Push magazine release latch and slide rail open.

FinishPro®10 l (1) Deslice el ajustador al largo

correcto del clavo. Conecte la herramienta al suministro de aire. (2) Empuje el pestillo de liberacióndelcargadoryábralo.

l (1) Faire coulisser l’élément ajusteur de façon à obtenir la longueur voulue de clous. Rac-corder l’air comprimé à l’outil. (2) Tirer le loquet du magasin et tirer le rail.

FASTENER LENGTH

5/8"-2" (16-50MM) FinishPro ®18FASTENER TYPE

AX

FASTENER GAUGE

18 GAUGE

RELOADMade in Taiwan



l Push rail forward until it latches. l Empuje el carril hacia adelante hasta cerrario.

l Pousser le rail jusqu’a encliqu-etage.

l Position workpiece contact (safety element) against work surface and pull the trigger.

l Oprima el seguro contra la superficiedetrabajoyaprieteel gatillo.

l Placez la sécurité contre la surface de travail et tirez sur la détente.

l Lay strip of staples onto rail. l Ponga la tira sobre la guia. l Mettez une bande de agrafes sur la traverse.

FinishPro®2N1

l Remove jammed fastener.l Remueva el sujetador atascado. l Enlevez le projectile coinçé.

FASTENER LENGTH

5/8"-2" (16-50MM)

FinishPro ®18

FASTENER TYPEAX

FASTENER GAUGE

18 GAUGE

RELOAD

Made in Taiwan

l Should a fastener jam occur, disconnect air supply.

l Si se produce un atascamiento de las sujetadores desconecte el suministro de aire.

l Au cas ou un coinçage de finettesseproduirait,coupezl’arrivée d’air.

l Push latch and slide rail open. Remove fasteners.

l Empuje el cerrojo y deslice el carril abriéndolo. Saque las sujetadores.

l Tirer le loquet et ouvrir le rail en le glissant. Enlever les projectiles.

FASTENER LENGTH


AX

FASTENER GAUGE

18 GAUGE


FASTENER LENGTH


AX

l To adjust the depth the fastener isdriven,firstdisconnecttheair supply. Using your thumb or indexfinger,rotatewheeltoad-just the Depth Control safety ele-ment to achieve desired depth.

l Para ajustar la profundidad de sujetador, dede primero desco-nectar el aire. Usando el dedo pulgar o el dedo indice, rote la manivela para ajustar el seguro a la profundidad deseada.

l Pour ajuster la profondeur à laquelle le projectile est en-foncé, déconnecter tout d’abord l’appareil de la source d’air comprimé. A l’aide du pouce ou de l’index, faire tourner la molette pour ajuster la position du palpeur de sécurite.

FASTENER LENGTH


AX

FASTENER GAUGE

18 GAUGE


FinishPro®2N1/15/18

5

FinishPro®2N1

FinishPro®2N1

FinishPro®2N1

1

2

6



l Keep the tool pointed away from yourself and others and connect air to tool.

l Mantenga la herramienta apun-tadaenladirecciónopuestadeusted y de otros y conecte el aire a la manguera.

l Maintenez l’outil pointé à l’écart d’autres personnes et vous-même et raccordez l’air à l’outil.

FASTENER LENGTH


AX

FASTENER GAUGE

18 GAUGE


Maintenance Maintenimiento Entretien

l All screws should be kept tight. Loose screws result in unsafe operation and parts breakage.

l Todos los tornillos tienen que mantenerse apretados. Los tornillos sueltos pueden producir unaoperaciónnosegurayquebraduras de partes.

l Toutes les vis doivent être maintenues serrées à fond. Les vis desserrées entraî-nent un manque de sûreté du fonctionnement et la rupture de pièces.

l With tool disconnected, make daily inspection to assure free movement of safety element and trigger. Do not use tool if safety element or trigger sticks or binds.

l Con la herramienta desconecta-da, haga inspecciones diarias para asegurar el movimiento libre del seguro y del gatillo. No use la herramienta si el seguro o el gatillo se atoran.

l L’outil étant séparé de l’alimentation en air, effectuez une inspection journalière pour assurer le libre mouvement du palpeur de sécurité et de la détente. N’utilisez pas l’outil si le palpeur de sécurité ou la détente colle ou se coince.

FrançaisEspañolEnglish

FASTENER LENGTH


AX

FASTENER GAUGE

18 GAUGE


FASTENER LENGTH


AX

FASTENER GAUGE

18 GAUGE





l Wipe tool clean daily and inspect forwear.Usenon-flammablecleaning solutions only if neces-sary–DO NOT SOAK. Caution: Such solutions may damage O-rings and other tool parts.

l Solamente si es necesario use soluciones para limpieza no flamablés-NOLAREMOJE. Precaución:Talessolucionespueden dañar los empaques y otras partes de la herramienta.

l Nettoyez l’outil chaque jour à l’aide d’un chiffon et inspectez-le pour déceler une éventuelle usure. Utilisez uniquement des solvantsnoninflammablesencas de nécessité-NE LE FAITES PAS TREMPER ! Attention : De tels produits peuvent endommager les joints et autres pièces de l’appareil.

l Aplique aceite neumático SENCO en la entrada de aire dos veces al día (dependiendo en la frecuencia de uso 5 A 10 Gotas). Otros aceites pueden dañar los anillos en “O” y otras piezas de la herramienta.

l Avec une burette, placer 5 à 10 gouttes d’huile pneumatique dans l’arrivée d’air deux fois par jour (dépend de l’intensité de l’utilisation de l’appareil).D’autres huiles pourraient endommager les joints toriques et d’autres pièces de l’outil.

l Squirt Senco pneumatic oil (5 to 10 drops) into the air inlet twice daily (depending on frequency of tool use). Other oils may damage O-rings and other tool parts.

SENCO offers a full line of accesso-ries for your SENCO tools, including:l Air Compressorsl Hosel Couplersl Fittingsl Safety Glassesl Pressure Gaugesl Lubricantsl Regulatorsl FiltersFor more information or a complete illustrated catalogue of SENCO accessories, ask your representative for #MK336.

SENCO ofrece una línea completa de Accesorios para sus herramien-tas SENCO, incluyendo:l Compresores de Airel Mangueral Conectores Rapidosl Conectoresl Anteojos De Seguridadl Manometrosl Lubricantesl Reguladoresl FiltrosParamasinformacionóunpourrecevoir un catalogo completo ilus-trado de los Accesorios SENCO, pregunte a su representante pour el numero MK336.

SENCO offre une gamme étendue d’accessoires pour vos outils SENCO y compris :l Compresseursl Tuyauterieflexiblel Raccordsl Lunettes de sécuritél Manomètresl Lubrifiantsl Régulateursl FiltresPour plus d’informations ou pour recevoir un catalogue détaillé des accessoires proposés par SENCO, prenez contact avec votre représentant SENCO (référence catalogue : #MK336).


Accessories Accesorios Accessoires


Options Opciones Options

l LS Tools can be converted to use different size fasteners with these complete kits.

LS1GA0238

LS2GA0239

l Las LS herramienta pueden ser convertidas para usar clavos de diferentes medidas con estos conjuntos completos.

l Les appareils LS peuvent être modifiésdefaçonàutiliserdesprojectiles de taille différente grâce à ce kit complet.

LS

7

8

SYMPTÔMEFuite d’air près du sommet

de l’outil / fonctionnement lent.

SOLUTIONSerrezlesvisàfond/vérifiez

l’alimentation en air ou remplacez les pièces portant la lettre “A”.

SYMPTÔMEFuite d’air près de la base

de l’outil / retour inadéquat.

SOLUTIONSerrez les vis à fond / nettoyez

l’outil ou remplacez les pièces portant la lettre “A”

SYMPTÔMEAutres problèmes.

SOLUTIONPrenez contact avec SENCO.

SYMPTOMAir leak near top of tool /

Sluggish operation

SOLUTIONVerify air supply / tighten screws or

install Parts Kit A.

SYMPTOMAir leak near bottom of tool /

Poor return.

SOLUTIONClean tool / tighten screws or

install Parts Kit A.

SYMPTOM

SOLUTIONContact SENCO.

Other problems.

SÍNTOMAEl aire se escapa cerca de la parte su-periordelaherramienta/Operación

SOLUCIÓNAprietelostornillos/Verifique

el suministro de aire o instale elJuegodePartesA(Parts

SÍNTOMA

SOLUCIÓN

El aire se fuga cerca de la parte inferior de la herramienta / Mal

Apriete los tornillos / Limpié la herramientaoinstaleelJuegodePartes A (Parts Kit A).

SÍNTOMA

SOLUCIÓNOtros problemas.

Póngaseencontactocon


Troubleshooting Identificación de Fallas Dépannage

WARNINGRepairs other than those described here should be performed only by trained,qualifiedpersonnel.ContactSENCO for information at1-800-543-4596.

ALERTALas reparaciones, fuera de aquellas descritas aquí, deben de ser lleva-das a cabo solamente por personal entrenadoycalificado.Póngaseen contacto con SENCO para información1-800-543-4596.

AVERTISSEMENTLes réparations autres que celles décrites ici doivent être réalisées uniquement par du personnel qualifiéayantreçulaformationappropriée. Pour toute information, prenez contact avec SENCO par téléphone en appelant Le Distribu-teur agréé.




AAA

A

Parts Kit A

LS

FIP15/18/2N1

FIP10 YK0397

YK0395

YK0393

9


Specifications Especificaciones Specifications

TECHNICAL SPECIFICATIONS

Minimum to maximum operating pressureAir Consumption (60 cycles per second)Air InletMaximum Speed (60 cycles per second)WeightFastener CapacityTool size: HeightTool size: Length Tool size: Width: Main Body

FinishPro®2N1

70–120 psi0.84 scfm1⁄4 in. NPT52.7 lbs.1107 3⁄4 in.9 3⁄4 in2 3⁄16 in.

80–110 psi.82 scfm1⁄4 in. NPT52.7 lbs.1007 3⁄4 in.8 5⁄16 in.2 in.

LSFinishPro®10

70–95 psi0.84 scfm1⁄4 in. NPT32.5 lbs1006 5⁄8 in.9 in.1 3⁄4 in.

FinishPro®15

70–120 psi0.84 scfm1⁄4 in. NPT52.7 lbs.1107 3⁄4 in.9 3⁄4 in.2 3⁄16 in.

FinishPro®18

70–120 psi0.84 scfm1⁄4 in. NPT53.0 lbs.1109 3⁄8 in.9 3⁄4 in.2 3⁄16 in.

ESPECIFICACIONES TECNICAS4.8–8.3 bar21.6 liter1⁄4 in. NPT31.2 kg110197 mm248 mm52 mm

Presión de operación mínima y máximaConsumo de aire (60 ciclos por segundo)Entrada de aireVelocidad máxima (ciclos por segundo)PesoCapacidad de grapas por cargadorTamaño de la herramienta: AlturaTamaño de la herramienta: LongitudTamaño de la herramienta: Ancho (Cuerpo)

5.5–7.5 bar23.1 liter1⁄4 in. NPT51.2 kg100197 mm211 mm50 mm


FinishPro®2N1 LSFinishPro®10 FinishPro®15 FinishPro®18



SPECIFICATIONS TECHNIQUES

Pression de travail min. et max.Consommation d’air (60 cycles par seconde)Admission d’airVitesse maximum (cycles par seconde)PoidsCapacité de projectiles par magasinDimensions de l’outil: hauteurDimensions de l’outil: longueurDimensions de l’outil: largeur: corps de l’appareil)



FinishPro®2N1 LSFinishPro®10 FinishPro®15 FinishPro®18




10



A

.050 in.1,27 mm

MODEL: 1T0001N / 1U0001N

Inches5/83/4

11 1/4

1 3/8

1 1/2

1 5/8

1 3/4

2

Code

AX10A200629AX11A200759AX13A201009AX15A201259AX16* --------AX17*A201509AX18*A201629AX19*A201759AX21*A202009

mm161925323538414550

A

LS

Inches1/23/4

1

MODEL: 200001N (LS1)

A

.050 in.1,3 mm

Code

AZ08AZ11AZ13

mm131925

A

* FinishPro®18 only

Inches5/83/4

1

MODEL: 200001N (LS2)

A

.050 in.1,27 mm

Code

AY10AY11AY13

mm161925

A

FinishPro®15/18

11



FinishPro®10

Inches1/25/83/47/8

1

MODEL: 2D0001N

Code

L08A800509L10A800629L11A800759L12A800879L13A801009

A

Inches1/25/83/4

1

MODEL: 2C0001N

Code

CZ08A100509CZ10A100629CZ11A100759CZ13A101009

mm12151825

A

.050”1,3 mm

.044”1,1

1316192225

mm

FinishPro®2N1

A

.050 in.1,27 mm

MODEL: 2D0001N

Inches5/83/4

11 1/4

Code

AX10A200629AX11A200759AX13A201009AX15A201259

mm16192532

A

A

.025 in.,64 mm

A

.250”6,4 mm

Limited WarrantySENCO® Pneumatic, DuraSpin®, Cordless Tools

& Compressors

Senco Products, Inc. (“SENCO”) designs and constructs its products using the highest standards of material and workmanship. SENCO warrants to theoriginalretailpurchaserthatthefollowingproductswillbefreefromdefectsinmaterialorworkmanshipforthewarrantyperiodspecifiedbelow:

SENCO® XP Series SENCO PRO Series SENCO CompressorsFive years One year One year

SENCO DuraSpin® SENCO Cordless SENCO Reconditioned ProductsOne year Two years One Year

During the warranty period (which begins on the purchase date), SENCO will repair or replace, at SENCO’s option and expense, any product or part that is defective in materials or workmanship after examination by a SENCO Authorized Warranty Service Center, subject to the exceptions, exclusions and limitations described below. Any replacement product or part will carry a warranty for the balance of the warranty period applicable to the replaced product or part. A DATED SALES RECEIPT OR PROOF OF PURCHASE FROM THE ORIGINAL RETAIL PURCHASER IS REQUIRED TO MAKE A WARRANTY CLAIM. Warranty registration also is required and can be accom-plished through on-line Product Registration at www.senco.com or by completing and returning the postage paid warranty registration form included with your Operator’s manual/parts chart information, found inside the product carton. To make a warranty claim, you must return the product, with proper receipt/proof of purchase and return transportation charges prepaid, to a SENCO Authorized Warranty Service Center. A list of SENCO Authorized Warranty Service Centers can be found at www.senco.com orbycalling1-800-543-4596tollfree.SENCOwillperformitsobligationsunderthiswarranty,withinareasonabletimeafterapprovalofthewarrantyclaim.

Wheelbarrow Compressors:1. Subject to the exceptions, exclusions and limitations described below, SENCO warrants that the compressor pump will be free from defects in materials and

workmanship for two years after the purchase date.2. Defective parts of the compressor pump not subject to normal wear and tear will be repaired or replaced, at SENCO’s option, during the two year warranty

period. If SENCO determines that repair or replacement is not feasible, SENCO will refund the purchase price less reasonable depreciation based on actual use.

SENCO Cordless:1. Subject to the exceptions, exclusions and limitations described below, SENCO warrants that the SENCO Cordless tool will be free from defects in materials

and workmanship for two years after the purchase date. 2. SENCO warrants that the batteries and chargers used with SENCO Cordless tools will be free from defects in material and workmanship for one year after the

purchase date.

WARRANTY EXCLUSIONSThe following warranty exclusions apply:

1. Normalwearpartsarenotcoveredunderthiswarranty.Normalwearpartsinclude,forexample,isolators,drivebelts,airfilters,rubbero-rings,seals,driverblades, piston stops, and piston/driver assembly.

2. This warranty does not cover parts damaged due to normal wear, misapplication, misuse, accidents, operation at other than recommended speeds or voltage (electric units only), improper storage, or damage resulting during shipping.

3. Productsusedinproduction/industrialapplicationsasdefinedbySENCOareexcludedfromthiswarranty.4. Labor charges or loss or damage resulting from improper operation, maintenance or repairs are not covered by this warranty.5. SENCO does not warrant the Wheelbarrow Compressor Engine/Motor, but the Compressor Engine/Motor may be covered under a warranty offered by its

manufacturer.

GENERAL WARRANTY CONDITIONSThis warranty will be honored, only if:

A. Clean, dry, regulated compressed air has been used, at air pressure not exceeding the maximum indicated on the tool casting;B. Noevidenceofabuse,abnormalconditions,accident,neglect,misuseorimpropermodificationsorstorageoftheproduct;andC. NoDeviationfromoperatinginstructions,specifications,andmaintenanceschedulesexists(readOperatorManualforuse,specifications,andmaintenance

instructions).

THIS WARRANTY IS THE ONLY WARRANTY ON THE PRODUCT, AND SENCO DISCLAIMS ALL OTHER WARRANTIES. ANY IMPLIED WARRANTIES WILL BE LIMITED IN DURATION TO THE APPLICABLE WARRANTY PERIOD SPECIFIED ABOVE. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WAR-RANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. YOUR REMEDIES ARE SOLELY AND EXCLUSIVELY AS STATED ABOVE. SENCO SHALL IN NO EVENT BE LIABLE FOR INCIDENTAL, CONSEQUENTIAL, INDIRECT, OR SPECIAL DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU. IN NO EVENT, WHETHER AS A RESULT OF A BREACH OF CONTRACT, WARRANTY, TORT (INCLUDING NEGLIGENCE) OR OTHERWISE, SHALL SENCO’S LIABILITY EXCEED THE PRICE OF THE PRODUCT WHICH HAS GIVEN RISE TO THE CLAIM OR LIABILITY. ANY LIABILITY CONNECTED WITH THE USE OF THIS PRODUCT SHALL TERMINATE UPON THE EXPIRATION OF THE WARRANTY PERIOD SPECIFIED ABOVE. NO EMPLOYEE OR REPRESENTATIVE OF SENCO OR ANY DISTRIBUTOR OR DEALER IS AUTHORIZED TO MAKE ANY CHANGE OR MODIFICATION TO THIS WARRANTY.

Thiswarrantygivesyouspecificlegalrights,andyoumayalsohaveotherrightswhichvaryfromstatetostate.

REPLACEMENT OF TOOL DUE TO NATURAL DISASTERSENCOwillreplaceanytooldestroyedbyanActofGodsuchasflood,earthquake,hurricaneorotherdisasterresultingonlyfromtheforcesof nature. Such a claim will be honored provided that such original retail purchaser had previously submitted a completed warranty regis-tration card for the tool, and then submits proof of ownership and an acceptable statement describing such Act of God documented by an insurancecarrier,policedepartment,orotherofficialgovernmentalsource.Toobtaininstructionsforfilingaclaimcall1-800-543-4596.

CUSTOMER SATISFACTIONOne hundred percent customer satisfaction is our #1 goal. If for any reason the product does not perform to the original purchaser’s satisfac-

tion, it can be returned to the place of purchase within thirty days with dated sales receipt for a full refund of the purchase price.

© 2006 by SENCO PRODUCTS, INC.CINCINNATI, OHIO 45244-1611 USAwww.senco.com070101

finishpro 10 - tesoro en maderas · 8 a100629 2.6m headless galv plain clamshell ¾ a100759 2.6m...

Documents