Tech-Know-Trans 2K11

Common Events: 1. Robotics.2. Paper Presentation.3. Energy Contraption.4. Quiz (VNIT)5. LAN Gaming.

Mechanical EngineeringEvents: 1. Cad Race2. Lathe Wars

Computer Engineering & Information TechnologyEvents: 1. Blind Coding 2. Mini Project (VB, Java)3. Quiz (Technical)

Electronics and Telecommunication

Event: 1) Circuit Debugging (Hardware)2) Circuit Maker (Hardware)

Common EventsRoboticsCoordinators:1. Ajit Gujale (9028346439) ajit.gujale@gmail.com2. Swapnil Bhosale (9028073432) swapnilbhosale15890@gmail.com3. Ravi Solase (9028912851) ravi.solase1391@gmail.com4. Baburao Birajdar

ROBORACE (NFS)Description: Race is run to the finish. The machines must complete run, tackling obstacles, avoiding penalties, completing run in minimum time as possible for getting the prize while your robot snatches it for you. The most talented and good controller of robot wins. This race is a tough challenge for the participants and a ton of entertainment for the spectators.Objective: The objective of game is to complete the track in minimum time as possible to clinch the win.

Rules & Regulation: Dimensions of the Robot: 25cm* 25cm*25cm. Max Power supply specification: 24V Max weight: 3 kg. Lego kits are not allowed. Wire should not disturb the arrangement on track. Falling of any part of robot on the track and damage to the track will lead to the immediate disqualification of the robot. Scoring system will be declared on the spot. Track of race will be displayed on college website 15 days prior to the event.On the spot entries are allowed before starting of the event. Decision of judges will be final and binding.

Teams and fees: Max no of participants in the team: 3 Registration fee is 150 Rs per team. Team members can be of different colleges. For each registration the robot should be different. A team, once registered, cannot register again, even with a different name. All students with a valid identity card of their respective educational institutes are eligible to participate. Teams will be required to show the I-Cards of all of its team members during the matches.

Prizes: 1st Prize: Rs 5000/-2nd Prize: Rs 2500/-

Expenditures: Posters:- 1000/- Certificates:-3000/- (For 300 Certificates) Track:- 1,500/- Prizes:- 7,500/- Trophies:- 600/- Battery cost :- 600/-

Total: - Rs 14200/-

Paper PresentationDescription:In order to sustain the race of research and technology immense amount of knowledge and information is required .The Paper presentation allows you to share your knowledge and findings with the world and keep the wheel of development spinning.Then Paper Presentation is the event for you where u can revolutionize the world through your research and your presentation skills.Objective: Show-off the principles, techniques and tools you have designed, discovered and let the world see it. IMPORTANT NOTE: Participants can choose any number of themes or subject and present their paper on the relevant topic. (Subject to number of registrations done by the participant team). Innovativeness of the topic under a particular theme will be given credit. Original contribution to the paper will be appreciated. Only pure technical papers would be considered for short listing. Use your discretion to judge whether your topic fits into the chosen theme. Opening paragraph of abstract should state the link between the paper topic and the theme chosen.THEMES:1. Save the Universe2. Nano - The Future3. Mobility4. Technology- The spice of Life5. Speed Up6. Blitz Krieg- Technology in Warfare7. Safeguard8. Avalanche- Radical changes9. Comfort and Entertainment10. Technology and Agriculture11. Better, Cheaper and Faster12. Recovery, Recycle, and Reuse

SUBJECTS: Sustainability-Mechanical Engg. Approach. Nanotechnology-Application in Mech. Engg. Cryogenics. Mech. Engg. Design/CAD-CAM/FEM. Robotics-Automation Mechatronics/MEMS. Production Engg/FMS/CIMS/Advances in manufacturing technology. Energy & Energy Audit. Non Conventional energy sources. Nano- Robotics and Bio- Robotics Machine vision PDM/PLM Future Automobiles Flexible Manufacturing Systems Robotics & Automation Microprocessor Based IC Engines Computer Aided Manufacturing CAMless Engines Smart Materials Micro Electro Mechanical Systems Electrochemistry in material science Biological and synthetic materials FADEC CAD/CAM Sustainable Energy Automation in automobiles Process Modeling and Simulation Energy Conservation Safety and Environment Automobile Engineering Energy Conservation Automation in automobiles Future Automobiles Thermal Engineering Recent trends in manufacturing Manufacturing Processes Advances in energy generation Robotics & Industrial Automation Energy Management Alternate fuels

STANDARD PAPER FORMAT: Font size - 12 Font - Times New Roman 1.5 line spacing Soft copy can be in Microsoft Office (2003 to 2010)Abstract should not exceed 1.5 pages and Paper should not exceed 15 pages.The participants should submit 2 hard copy and one soft copy at time registration. Paper must be preceded by a cover page specifying the title of the paper, college name, and name of authors, branch, telephone numbers and e-mail id. The hard copy of paper should contain: 1. Title - Theme of the paper (subject).2. Name - Of both authors3. Your PPT Unique id, which you got after you registered on website AND the receipt number.4. Phone no - Of both authors5. Email id - Of both authors6. Postal add - Of both authors7. Paper and Abstract as attachmentsELIMINATION: All participants have to submit abstract and papers on or before 15th Feb 2011. The hard copy paper must contain names of all the participants, their contact numbers, name of the college, registration/receipt no. The files should be word files. The names of short listed teams will be declared on 20th Feb 2011. Deadline: 15th Feb 2011 Abstract and Paper: Must be in IEEE formatTEAM STRUCTURE & FEES: Each team can have a maximum of 2 participants. 100 Rs per team.

Coordinators: - Mechanical a. Sagar Bahirje (9766797897) sagarbahirje@gmail.com

E & TCa. Anilkumar Tambake. (9673161525)CE & ITa. Chetan Hiremath. (9096138091)

Energy ContraptionContrivance1. Objectives: Contraption helps to conserve energy by converting one form to another.

2. Final task:Switch on the bulb.3. Compulsory Steps: Use of at least one and at most 3 Non-conventional energy resources. After 3, every non-conventional energy conversion will be given 10 points. If any of the previous non-conventional steps are repeated then they will be given 5 points. 4. Bonus steps: a. Use of attractive property of a magnet. b. Making use of a jet of water to actuate the further circuit. (It should be essentially a jet. Water in the form of sprinkles, droplets etc will not be considered.) 5. Rules and regulations:-

The dimension of space provided will be (l*b*h) 5ft*6ft*6ft. The total time taken for the task should not exceed 15 minutes. After 15 minutes, 1 point per second will be deducted from the total score. In the first trial, before the fourth hand touch one would be given choice to go for fourth hand touch or to go for second trial. In case of second trial 3 hand touches will be allowed. Further average of two trials will be considered. If you prefer to go for fourth hand touch in the first trial, total of five hand touches will be allowed and score after fifth hand touch will be considered as your final score. Hand touch is not allowed for bonus step. If there is a hand touch in bonus step, Bonus score for that step will not be considered. For each of first three hand touches 10 marks will be deducted. For fourth and fifth hand touch 20 marks will be deducted for each. Team will be disqualified for more than five hand touches. All energy conversions don't carry equal weightage. Following is the distribution.Sound (10 pts), Magnetic (10 pts), Light (10 pts), Electrical or Electronic (10 pts), Mechanical (8 pts), Chemical (8 pts). Use of explosives is not allowed. Only a 230V/50Hz electric supply will be provided to each team. Judges & organizers decision will be final and binding to all. Failing to initiate the contraption when asked by the organizers may lead to the disqualification of the team for that trial. All the participating teams should submit a detailed abstract of their contraption as per the following format: Total no of steps Number of distinct energy conversions along with the details of type (form) of energy conversion. Innovative steps claimed. Details of compulsory steps. Detail explanation of bonus steps (if any). You can make sketches, Flowcharts to explain any step. All the participants must bring at least 3 copies of their abstract during the contraptions event.

6. Team Structure: Each team can have a maximum of 4 participants. Students from any engineering discipline (B.Tech. / BE /Diploma) can participate.

7. Entry fees:

Rs. 100/- per team.

8. Note: What do I have to bring? What will the organizers provide? Following items will be made available at venue: 220 volts A.C. supply Extension cords 9. Prizes: 1st prize- 4500/- Rs Runner up-2500/-Rs

Lan GamingCOUNER STRIKE : "AK47_OF_JUSTICE".1.Team Format: 5 vs. 5 2. Match Format: First to win 6 rounds3. Match winner: In case of a draw extra rounds will be played until the winner is determined4.Round time: 1 minute 30 seconds5.Buy time: 15 sec6.Freeze time: 6 sec7.Coin Toss: The winner of the coin toss gets to choose either the map or side, the losing team gets to choose the remaining option8.Tie: In case of a tie after 10 rounds, a tie-breaker will be played, consisting of 3 rounds.9. In case of a tie during the tie-breaker another tie-breaker to be played, until the winner is determined10.Official Maps: De_Dust2 De_Inferno De_Dust De_Dust2

11.Throwing grenades over buildings in all maps are allowed.

Unfair Practices Subject to Disqualification

1.Team members may communicate verbally if they are alive in the match or when all team members are dead.2.Any competitor who has died cannot communicate by ANY means (No gesture or verbal communication will be allowed) with any other team member or opponent until the beginning of the next round.3.If a competitor continues to communicate after he/she is killed, the team may be given a warning or lose by default at the SERVER MASTERs sole discretion.4.Binding Duck to scroll wheel is not allowed.5.Use of personal model/skins are not allowed (includes weapon skins).6.Use of personal map texture are not allowed. 7.All cheat programs are not allowed.8.Two warnings will be given for the use of abusive languages in the gaming premises after which a team gets disqualified.

If disconnection occurs during a match:

1.If all the competitors cannot play due to an unintended, unforeseen accident such as server stoppage Before the 3rd round starts: restart the match After the 3rd round starts: Disconnected competitor must reconnect to the server. The round is continued unpausing, and if the disconnected competitor cannot connect to the server, all competitors must wait during the freeze time after the round until the disconnected competitor connects to the server. At this time, the match may continue by unpausing. (Not a restart)2.If up to 3 of all competitors are unintentionally disconnected: The score for that round is discarded. The game is paused after the round during the freeze time, and all competitors wait until the disconnected competitors are connected to the server. When all competitors are connected, the match may continue by unpausing the game.3.In the case of intentional disconnection, the SERVER MASTER may decide to end the match with the offending team losing by forfeit.

Note:

If any player joins to opponent team then game will not be restarted and its player's fault

. DD of Rs.400/- per team (Rs. 100/- per participant) Drawn in favor of 'Principal WIT, Solapur' payable at Solapur.2. All correspondants should be made to:

NFS 1.Competition Method: 1 vs. 32.Game Type : Circuit 3.Other controllers, Steering Wheel allowed4.At the end of each match, players must maintain the final screens and receive confirmation from a referee.5.Winning a race: The winner of a race is the first player to complete 5 laps of the circuit course and cross the finish line.

Race Mode Options: Circuit1. Track Direction : Forward2. LAPS : 53. N20 : on4. Collision Detection : Off5. Performance Matching : Off6. Min Num. Players : 4

Disconnection:

Any disconnection of the connection between match players due to System, Network, PC, and/or Power problems/issues Intentional Disconnection: Upon judgment by the referee, any offending player will be charged with a loss by forfeit. Unintentional Disconnection: If the disconnection is deemed to be unintentional by the referee, the match will be restarted. If any player does not agree to a match restart, that player will lose by default.

Unfair play

1.Use of any cheat program2. Intentional disconnection3. Use of any settings exceeding standard and permitted settings

Actions to be taken on unfair play: If the match is disrupted due to unnecessary chatting, the player may be given a warning or lose by default at the referees sole discretion. Upon discovery of any player committing any violations regarded as unfair play, that player will be disqualified from the tournament. During the course of any match, the operations staff and/or referee may determine other actions to be unfair play, at any time. Two warnings constitute being disqualified from the tournament.

. DD of Rs.100/- per participants Drawn in favor of 'Principal WIT, Solapur' payable at Solapur.

Quiz (VNIT)

Mechanical Events Cad Race

Lathe War

Computer Engineering & Information TechnologyBlind Coding

Mini Project (VB, Java)

Quiz (Technical)

Electronics and TelecommunicationCircuit Debugging (Hardware)

Circuit Maker (Hardware)