final inner pages- 3 april - columbia...

COLUMBIA WHITE OIL 8


Note:

1. The above data is indicated of recent average values only. Minor variations which do not affect product performance or quality may be

expected in manufacture.

2. Specific requirements shall be custom-made on request.

3. White Oils are manufactured in compliance with I.P., U.S.P., B.P. and E.Ph specifications and conform to the requirement of U.S. FDA 21

CFR 172.878 (a) and (b).

SR. NO

TESTS METHOD RANGE TYPICAL VALUES

COLUMBIAPETROCHEM

WHITE OILS

SR. TESTS METHOD RANGE TYPICAL VALUES

NO

1. Description Visual Transparent colourless oily

liquid

Transparent colourless oily

liquid

2. Colour ASTM D 156 +30 +30

3. Density @ 25 ºC, g/ml

@ 29.5 ºC, g/ml

ASTM D 1298 0.812 - 0.845

0.810 - 0.842

0.819

0.816

4. Kinematic Viscosity

@ 40 ºC

ASTM D 445 7 - 10 cSt 8.5 cSt

5. Refractive Index @ 20 ºC ASTM D 1218 – 1.476

6. Sulphur Compound IS:7299/I.P. Passes Passes

8. Flash Point ºC ASTM D 92 150 MIN 154

7. Pour Point ºC ASTM D 97 -6 MAX -39

liquid

1. Description Visual Transparent colourless oily Transparent colourless oily

liquid

2. Colour ASTM D 156 +30 +30

4.

–


@ 29.5 ºC, g/ml

ASTM D 1298 0.818 - 0.858

0.815 - 0.855

0.824

0.821

5.

Kinematic Viscosity

@ 40 ºC

ASTM D 445 10 - 14 cSt 12.9 cSt

Refractive Index @ 20 ºC ASTM D 1218 1.476

7.

8.


Pour Point ºC ASTM D 97 -6 MAX -24

Flash Point ºC ASTM D 92 160 MIN 166



SR. NO


SR. NO



liquid


liquid

2. Colour ASTM D 156 +30 +30


@ 29.5 ºC, g/ml

ASTM D 1298 0.823 - 0.863

0.820 - 0.860

0.838

0.835

4.

ºC

Kinematic Viscosity

@ 40

ASTM D 445 14 - 18 cSt 15.5 cSt

5. Refractive Index @ 20ºC ASTM D 1218 – 1.4764


8. ºCFlash Point ASTM D 92 165 MIN 174


liquid


liquid

2. Colour ASTM D 156 +30 +30

4.

–


@ 29.5 ºC, g/ml

ASTM D 1298 0.826 - 0.863

0.821 - 0.860

0.830

0.827

5.

Kinematic Viscosity

@ 40 ºC

ASTM D 445 19 - 22 cSt 20 cSt

Refractive Index @ 20ºC ASTM D 1218 1.4765

7.

8.



Flash Point ºC ASTM D 92 180 MIN 186

COLUMBIAPETROCHEM

WHITE OILS

Note:





CFR 172.878 (a) and (b).



SR. NO



liquid


liquid

2. Colour ASTM D 156 +30 +30


@ 29.5 ºC, g/ml

ASTM D 1298 0.828 – 0.868

0.825 – 0.865

0.850

0.847


@ 40 ºC

ASTM D 445 30 – 33 cSt 32 cSt

5. Refractive Index @ 20ºC ASTM D 1218 - 1.4765


7. Pour Point ºC ASTM D 97 - 6 MAX -18


SR. NO



liquid


liquid

2. Colour ASTM D 156 +30 +30

3. Density @ 25 ºC,g/ml

@ 29.5 ºC, g/ml

ASTM D 1298 0.828 – 0.873

0.825 – 0.870

0.838

0.835


@ 40 ºC

ASTM D 445 48 - 54 cSt 49 cSt

6.

–5. Refractive Index @ 20ºC ASTM D 1218 1.477

Sulphur Compound IS:7299/I.P. Passes Passes



COLUMBIAPETROCHEM

WHITE OILS

Note:





CFR 172.878 (a) and (b).


COLUMBIA WHITE OIL 68SR. NO



liquid


liquid

2. Colour ASTM D 156 +30 +30


@ 29.5 ºC, g/ml

ASTM D 1298 0.848 - 0.880

0.845 - 0.880

0.856

0.853

4.

ºC

Kinematic Viscosity

@ 40

ASTM D 445 65 - 75 cSt 70 cSt

5. Refractive Index @ 20ºC ASTM D 1218 — 1.4775


8. ºCFlash Point ASTM D 92 220 246


SR. NO


liquid


liquid

2. Colour ASTM D 156 +30 +30

4.

–


@ 29.5 ºC, g/ml

ASTM D 1298 0.853 - 0.880

0.850 - 0.880

0.857

0.854

5.

Kinematic Viscosity

@ 40 ºC

ASTM D 445 95 - 105 cSt 100 cSt

Refractive Index @ 20ºC ASTM D 1218 1.4775

7.

8.



Flash Point ºC ASTM D 92 240 248

COLUMBIAPETROCHEM

WHITE OILS

Note:





CFR 172.878 (a) and (b).

WHITE OIL LIGHT

WHITE OIL HEAVY

SR. NO

TESTS TYPICAL VALUES

1. Description Transparent Oily Liquid

2. Solubility Insoluble in water & alcohol, soluble inether and chloroform

3. Density @ 25 ºC, g/ml 0.810 to 0.860

4. Kinematic Viscosity @ 40ºC

5. Cloud Point ºC

6. Pour Point ºC

7. Flash Point ºC

7 cSt to 40 cSt

Below zero

- 9 MAX

150 MIN

SR. NO

TESTS TYPICAL VALUES

1. Description Transparent Oily Liquid

2. Solubility Insoluble in water & alcohol, soluble inether and chloroform

3. Density @ 25 ºC, g/ml 0.845 to 0.880

4. Kinematic Viscosity @ 40ºC

5. Cloud Point ºC

6. Pour Point ºC

7. Flash Point ºC

40 cSt to 120 cSt

Below zero

-9 MAX

180 MIN

REPORT

1. The sample complies with the prescribed standards of quality.

2. The methods used were ASTM.

COLUMBIAPETROCHEM

WHITE OILS

NOTE:

1) All oils above are colourless (Saybolt +30 Colour), odourless, tasteless and meet requirements of U.S. FDA and USP, B.P. and Eph Pharmacpeia standard for Neutrality, Sulphur Compounds,

Solid Paraffins and Carbonizable substances. All the above oils have nil arsenic and lead content.

2) The above data is indicated of recent average values only. Minor variations which do not affect product performance or quality may be expected in manufacture.

3) Specific requirements can be custom-made on request.

ISO 9001-2008 CERTIFIED ISO 14001-2004 CERTIFIED

VISCOSITY GRADE TESTS METHOD 8 12 15 20 32 50 68 100

Density Range

Typical@ 29.5 ºC, g/mlASTM D 1298

0.810-0.842

0.816

0.815-0.855

0.8210.820-0.860

0.835

0.826-0.863 0.825-0.8650.847

0.825-0.870

0.835

0.845-0.880

0.853

0.850-0.880

0.854

ASTM D 445 8.5 12.9 15.5 20 32 49 70 100

Refractive Index @ 20 ºC ASTM D 1218 1.476 1.476 1.4764 1.4765 1.4765 1.477 1.4775 1.4775

Cloud Point ºC ASTM D 97 -12 -9 -9 -9 -6 -6 -6 -6

Pour Point ºC ASTM D 97 -39 -24 -24 -15 -18 -18 -15 -12

Flash Point ºC ASTM D 92 154 -166 174 186 210 240 246 248

Colour ASTM D 156 +30 +30 +30 +30 +30 +30 +30 +30

Kinematic Viscosity, SUS at 100 ºF ASTM D 2161 56 72 85 104 152 245 340 500

Kinematic Viscosity, cSt at 40 ºC

COLUMBIAPETROCHEM

WHITE OILS

0.827

TYPICAL TEST RESULTS

CHARACTERISTICS TEST METHOD

AS PER IS:335 AS AMENDED

Appearance

Density @ 29.5 ºC

Kinematic Viscosity at 27 ºC , cSt

Interfacial Tension N/m @27ºC

Flash Point PMCC ºC

Pour Point ºC

Neutralisation valuea) Total Acidity, mg KOH/gm (Max)b) Inorganic acidity/alkalinity

Corrosive Sulphur

Electrical Strength (Breakdown Voltage) KV(rms)

a) New Unfiltered Oil

Presence of oxidation inhibitor % wt

Water Content ppm Max

S.K.Value, % (Max)

Accelerated Ageing test 96 hrs @ 115 ºC(open Beaker Method)

b) After Filteration

a) Sp. Resistance (Resistivity) ohm-cm @ 27 ºC

b) Sp. Resistance (Resistivity) ohm-cm @ 90 ºC

c) Dielectric Dissipation Factor @ 90 ºC

d) Total Acidity, mg/KOH/gm

e) Total sludge value, % Wt

Dielectric Dissipation factor,(Tan Delta) at 90 ºC

Specific Resistance (Resisitivity) Ohm-cma) At 90 ºCb) At 27 ºC

Oxidation Stability 164 Hours @ 100 ºCa) Neutralisation Value after Oxidationb) Total Sludge

A representative sample of theoil shall be examined in 100 mm thick layer at 27 ºC

IS : 1448 (P-16)

IS : 1448 (P-25)

IS : 6104

IS : 1448 (P-21)

IS : 1448 (P-10)

IS : 1448 (P-2)

Annex B

IS 6792 30 -

60

-

-

-

-

0.400.10

0.0910.0087

0.002

IS : 13631

IS : 13567

Annex D, IS : 335

--

--

Annex C

IS : 12177

IS : 6103

IS : 6103

IS : 6262

IS : 1448 (P-2)

IS : 6262

IS : 6103

--

0.03Nil

Non Corrosive

The oil shall not contain antioxidant additives

8 Max

-

-

-

-

-

- 50 ppm

2.5 X 10¹²

0.2 X 10¹²

0.20

0.05

0.05

35 x 10¹²1500 X 10¹²

300 x 10¹²13200 X 10¹²

0.840 g/cm³

12.4 cSt

0.048 N/m

160 ºC

-15 ºC

0.0009 mg KOH/gNil

Non Corrosive

68

Not present

15 ppm

1

61.41 X 10¹²

6.87 X 10¹²

0.034

0.035

0.006

72

0.0003

Transparent, clear and light

The oil shall be clear andtransparent & free fromsuspended matter or sediment

COLUMBIA NEW INSULATING OIL

-

-

0.04

140

-

0.89

27

-

-

-6

MIN MAX

Our product conforms to IS 335 : 1993

Note:1. The above data is indicated of recent average values only. Minor variations which do not affect product performance or quality may be expected in manufacture.


TRANSFORMER OILS COLUMBIAPETROCHEM

Annex. A of IS 12177

NEW INSULATING OIL / TRANSFORMER OIL

TEST DESCRIPTION TEST METHOD SPECIFICATION LIMITS

Appearance

Colour

Kinematic Viscosity, mm /S (max)²

At 40ºC

At -30ºC

Flash Point ºC,(Min), PMCC

Pour Point ºC

Density kg/dm³, @ 20ºC (Max)

Neutralisation Value mg KOH/g (Max)

Interfacial Tension @ 25ºC

Corrosive Sulphur

Total PCB content mg/Kg

Total Furans mg/Kg, Max

Polycyclic Aromatics % mass, Max

Break down Voltage, Min

As Delivered (Kv), min

After Treatment (Kv), min

Dielectric Dissipation factor at 90 ºC and 40 to 60 Hz (Max)

Gassing tendency at 50 Hz after 120 min,mm³/min Method A (Max)

Water Content, Max mg/kg

a) Bulk

b) Drum

Anti - oxidant Additives (Sub Clause 2.5)

Oxidation Stability, 164 hTotal acidity, mg KOH/g of oil (Max)Sludge, % by mass (Max) DDF @ 90 ºC

BS 148-1998

ASTM D 1500

ISO 3104

ISO 3104

ISO 2719

ISO 3016

BS EN ISO 3675

IEC - 62021

ISO - 6295

DIN 51353/BS 5680

IEC 61619

BS EN 61698

BS 2000

IEC 60156

-

-

IEC - 60247/61620

BS 5797/IEC-60628-A

IEC 60814

-

-

IEC 60666/BS 5984

IEC 61125 : 1993(Method C) IEC - 60247

L 0.5

11

1800

130

≤ - 45

0.895

0.01

0.04 Max

Non corrosive

Non detectable

1.00

3.00

30

70

0.005

+5

-

20

30

Not detectable Not detectable

1.20.80.5

0.5

9.0

298

-45

150

0.88

Nil

0.045

Non corrosive

Non detectable

Nil

0.5

50

70

0.0005

+1

-

14

22

1.00.680.36

Transparent, clear, bright,odourless liquid free fromsuspended impurities

Transparent, clear, bright,odourless liquid free fromsuspended impurities

TYPICAL VALUES

New Insulating Oil is a premium grade uninhibited Mineral Insulating Oil for Transformers and Switchgears


Our product conforms to IEC 60296:2003/BS-148:1998

Note:1. The above data is indicated of recent average values only. Minor variations which do not affect product performance or quality may be expected in manufacture.


1. PHYSICAL1.1 Appearance - IEC : 296 Clear, transparent Clear, transparent &

& free from sediment free from sediment & suspended matter & suspended matter

1.2 Density @ 20 ºC g/cm³ ISO : 3675 0.895 Max 0.8221.3 Kinematic Viscosity, Max Cst. ISO : 3104 16.5.0 at 40 ºC 7.6

800 at -15 ºC 4001.4 Interfacial Tension, at 25 ºC N/m ISO : 6295 0.04 Min 0.0521.5 Flash Point ºC ISO : 733 140 Min 1601.6 Water Content Bulk Mg/Kg IEC : 60814 30 Max 9.2

Water Content Drum 40 Max 11.01.7 Pour Point ºC ISO : 3016 -30 Max -36

2. ELECTRICAL2.1 Electrical Strength BDV kVrms IEC : 60156

As Delivered 30 min 62After treatment 50 min -

2.2 Dielectric Dissipation factor - IEC : 60247 0.005 0.0003(tan delta) at 50Hz, Max

3. CHEMICAL3.1 Neutralization Value (Total Acidity) Mg.KOH/gm IEC : 296 0.03 Max 0.0023.2 Corrosive Sulphur - ISO : 5662 Non-Corrosive Non-Corrosive 3.3 Oxidation Stability for 164

hrs at 100 ºC - IEC : 611253.3.1 Neutralization value Mg.KOH/gm - 0.4 Max 0.073.3.2 Total Sludge by mass % - 0.1 Max 0.001

3.6 Presence of Oxidation Inhibitor - IEC : 666 Not detectable Not detected

SR. NO

DESCRIPTION OF TEST UNITTEST METHODAS PER IEC-296

REQUIREDVALUE

MEASUREDVALUE

SR. NO

DESCRIPTION OF TEST UNITTEST METHODAS PER IEC-296

REQUIREDVALUE

MEASUREDVALUE

REMARKS: Conforms to IEC-296/1982, Class - I (UNINHIBITED OIL)

REMARKS: Conforms to IEC-296/1982, Class - II (UNINHIBITED OIL)


1. PHYSICAL1.1 Appearance - IEC : 296 Clear, transparent Clear, transparent &

& free from sediment free from sediment & suspended matter & suspended matter

1.2 Density @ 20 ºC g/cm³ ISO : 3675 0.895 Max 0.8701.3 Kinematic Viscosity, Max Cst. ISO : 3104 11.0 at 40 ºC 8.0

1800 at -30 ºC 9001.4 Interfacial Tension, at 25 ºC N/m ISO : 6295 0.04 Min 0.0501.5 Flash Point ºC ISO : 2719 130 Min 1481.6 Water Content Bulk Mg/Kg IEC : 60814 30 Max 8.1

Water Content Drum 40 Max 10.01.7 Pour Point ºC ISO : 3016 -45 Max -45

2. ELECTRICAL2.1 Electrical Strength BDV kVrms IEC : 60156

As Delivered 30 min 60After treatment 50 min -

2.2 Dielectric Dissipation factor - IEC : 60247 0.005 at 90 ºC 0.0002(tan delta) at 50Hz, Max

3. CHEMICAL3.1 Neutralization Value (Total Acidity) Mg.KOH/gm IEC : 296 0.03 Max 0.0033.2 Corrosive Sulphur - ISO : 5662 Non-Corrosive Non-Corrosive 3.3 Oxidation Stability for 164

hrs at 100 ºC - IEC : 611253.3.1 Neutralization value Mg.KOH/gm - 0.4 Max 0.083.3.2 Total Sludge by mass % - 0.1 Max 0.002

3.6 Presence of Oxidation Inhibitor - IEC : 666 Not detectable Not detected

DESCRIPTION

Columbia's Light Liquid Paraffin/White Mineral Oil is suitable for Pharmaceutical, Cosmetics & Food industries for

direct & indirect food contact.

PROPERTIES

For specific uses these oils must be

● Colourless Odourless Tasteless Conforming to the standards of pharmaceutical purity I.P., B.P. & U.S.P. ● ● ●

● Conforming to the standards of oils in contact with edible substances

They are therefore, subjected to a higher refinement so as to be able to conform to particular specifications,

(different specifications) in different countries and the standard FDA (Food & Drugs Administrative U.S.A.)

The range of Columbia Liquid Paraffins has the following gradations:

● ● Light grade Heavy Grade

APPLICATIONS

Chemical Industry

● ● The inert oils for the fabrications of metallic hydrides and catalysts Absorbent oils (e.g. in the extraction of the

natural essence of perfumeries, the impregnated paper of white oil is used.)

Cosmetic Industry

● ● Preparation of solid and liquid brilliantine Preparation of detergent creams, cold creams and beauty lotions

● ● ● Preparation of hydrated creams Preparation of bronzed oils Preparation of oil for hygiene of children

● Preparation of make-up products

Pharmaceutical Industry

● ● ● Antifoaming for the production of penicillin Internal lubricants as laxatives Additive in the machining of the

ingredients for the fabrication of the compressed Basis for ointments and emollients Vehicle of transport of● ●

medical spray

Packaging Industry for edible products

● Components for the lubricants of the tin band intended to be used for the tinned food

● Oiling of the cart and cartons for fruits and vegetables

The Plastic Material Industry

● ● ●Additive for the production of polyethylene Additive for extrusion of Polyvinyl Chloride Dispersant for

production of polyethylene Plasticizer for ethyl cellulose Plasticizer for coumarone-indene (resin) Plasticizer● ● ●

for EPDM (Ethylene-propylene-diene monomer) Plasticizer for polyethylene Plasticizer for poly-propylene● ●

Plasticizer for polystyrene Plasticizer for Annealing of the printed objects in nylon Hardening and annealing● ● ●

Textile Industry

● ● ● Oil components for spinning Oils for weaving and mesh Lubrication for sewing machines & hosiery

Various other industries

● ● Components for insecticide in agriculture Compressors for reactive gases like chlorine and sulphur dioxide

(lubrication of cylinders) Lubrication of paper cutter knives in paper mill Air filters for conditioning systems and● ●

under-water works

LIQUID PARAFFINS COLUMBIAPETROCHEM

Note:

1. The above data is indicated of recent average values only. Minor variations which do not affect performance or quality may be expected

in manufacture.

2. Specific requirements shall be custom-made on request

3. Light Liquid Paraffins / White Mineral Oils are manufactured in compliance with I.P., U.S.P., B.P. and Eph specifications and conforms to

the requirement of US FDA 21 CFR 172.878 (a) & (b)

COLUMBIA LIGHT LIQUID PARAFFINS

COLUMBIA HEAVY LIQUID PARAFFINS

TYPICAL PARAMETER LIGHT LIQUID PARAFFIN I.P.LIGHT LIQUID PARAFFIN

B.P./EPhLIGHT LIQUID PARAFFIN

U.S.P

Kinematic Viscosity @ 40ºC N.A. Not less than 33.5

Acidity / Alkalinity (Neutrality) Complies as per standard Complies as per standard

Solid Paraffin Complies as per standard Complies as per standard

Sulphur Compound N.A. N.A.

Readily Carbonisable Substance Complies as per standard Complies as per standard

Light absorption in the range 240 to 280 nm

N.A. N.A.

Polynucleur Aromatics Compound

Saybolt colour +30 +30+30

Odour and taste Odourless & Tasteless Odourless & TastelessOdourless & Tasteless

Dynamic Viscosity @ 20ºC, mPa s 25 to 80 N.A.25 to 80

N.A.

Specific Gravity @ 25ºC 0.810 to 0.875 0.818 to 0.8800.820 to 0.880

Complies as per standard




<0.1

N.A. Complies as per standard Complies as per standard

TYPICAL PARAMETER HEAVY LIQUID PARAFFIN I.P.HEAVY LIQUID PARAFFIN

B.P./EPhHEAVY LIQUID PARAFFIN

U.S.P

Kinematic Viscosity @ 40ºC N.A. Not less than 34.5

Acidity / Alkalinity (Neutrality) Complies as per standard Complies as per standard

Solid Paraffin Complies as per standard Complies as per standard

Sulphur Compound N.A. N.A.

Readily Carbonisable Substance Complies as per standard Complies as per standard

Light absorption in the range 240 to 280 nm

N.A. N.A.

Polynucleur Aromatics Compound

Saybolt colour +30 +30+30

Odour and taste Odourless & Tasteless Odourless & TastelessOdourless & Tasteless

Dynamic Viscosity @ 20ºC, mPa s 110 to 230 N.A.110 to 230

N.A.

Specific Gravity @ 25ºC 0.827 to 0.890 0.845 to 0.9050.860 to 0.904





<0.1

N.A. Complies as per standard Complies as per standard

LIQUID PARAFFINS COLUMBIAPETROCHEM

final inner pages- 3 april - columbia...

Documents