field instruments & solutions catalogue

Field in

strum

ents &

so

lutio

ns C

atalo

gu

e 2014

GS 23A0A2-E-ESubject to change without noticeAll Rights Reserved. Copyright 2013Yokogawa Europe B.V.Printed in the Netherlands, 09-1311

Field instruments & solutions Catalogue

2014Yokogawa EuropeEuroweg 2, 3825HD Amersfoort, The Netherlands

Yokogawa Austria Franzosengraben 1, P.O.B. 27, A-1034 Wien, Austria

Yokogawa Belgium Ikaroslaan 36, B-1930 Zaventem, Belgium

Yokogawa BulgariaNikolay Haitov Str. 12 / floor 4 / office 15 BG-1113 Sofia, Bulgaria

Yokogawa Czech RepublicOffice centre NAGANO IIU Nkladovho ndra 8130 00 Praha 3

Yokogawa France 17 Rue Paul Dautier, BP 267, 78147 Vlizy Villacoublay Cedex, France

Yokogawa GermanyBroichhofstr. 7-11, 40880 Ratingen, Germany

Yokogawa Hungaria H-1119 Budapest, Bcsalms u. 1-3, Hungary

Yokogawa IrelandUnit 411, Grants Park, Greenough Business Park, Rathcoole, Dublin, Ireland

Yokogawa Italia Via Pelizza da Volpedo 53, 20092 Cinisello Balsamo, Milano, Italy

Yokogawa the NetherlandsEuroweg 2, 3825HD Amersfoort, The Netherlands

Yokogawa PolandAl. Krakowska 197, 02-180 Warszawa, Poland

Yokogawa PortugalRua Rei Ramiro, 870-1G, 4400-281 Vila Nova de Gaia, Portugal

Yokogawa Romania5 Fabrica de Glucoza Street, Building F, Novo Park, 7th Floor, 2nd District, P.O. 020331, Bucharest, Romania

Yokogawa Slovakiatefnikova 8, SK, 81105 BRATISLAVASlovakia

Yokogawa Spain C/Lezama 22, 28034 Madrid, Spain

Yokogawa SwitzerlandBahnhofstrae 48 CH 4132 Muttenz, Switzerland

Yokogawa United Kingdom Stuart Road, Manor Park, Runcorn, Cheshire WA7 1TR, United Kingdom

1

Field Instruments & Solutions Catalogue 2014

2

Gen

eral

General Asset Management 5Fieldmate Versatile Device Management Wizzard GS 01R01A01-01E 7BT200 BRAIN Terminal GS 01C00A11-00E 13YHC5150X Fieldmate Handheld Communicator GS 01R01A30-01EN-A 17SSS7700, SSS7710, SSS7711, SSS7720, SSS7750 Plant Resouce Manager GS 33Y05Q10-32E 21

General Indicators 41FVX110 Fieldbus Segment Indicator GS 01S01C01-01EN 43MLD1 Loop Powered Process Indicator GS 61A01A01-01E-A 49

Pressure Transmitters 53EJX110A Differential Pressure Transmitter GS 01C25B01-01EN 55EJX120A Differential Pressure Transmitter GS 01C25B03-01EN 71EJX130A Differential Pressure Transmitter GS 01C25B04-01EN 81EJX210A Flanged Mounted Differential Pressure Transmitter GS 01C25C01-01EN 93EJX310A Absolute Pressure Transmitter GS 01C25D01-01EN 113EJX430A Gauge Pressure Transmitter GS 01C25E01-01EN 127EJX440A Gauge Pressure Transmitter GS 01C25E02-01EN 141EJX510A and EJX530A Absolute and Gauge Pressure Transmitter GS 01C25F01-01EN 153EJX610A and EJX630A Absolute and Gauge Pressure Transmitter GS 01C25F05-01EN 165EJX118A Diaphragm Sealed Differential Pressure Trasnmitter GS 01C25H01-01EN 177EJX438A Diaphragm Sealed Gauge Pressure Transmitter GS 01C25J03-01EN 201EJX Series Foundation Fieldbus Communication GS 01C25T02-01EN 223EJX Series HART 5/HART 7 Communication GS 01C25T01-01EN 229EJX Series Overview of Impulse Line Blockage Detection Function TI 01C25A31-01E 233EJA110E Differential Pressure Transmitter GS 01C31B01-01EN 241EJA120E Differential Pressure Transmitter GS 01C31B03-01EN 255EJA130E Differential Pressure Transmitter GS 01C31B04-01EN 265EJA210E Flange Mounted Differential Pressure Transmitter GS 01C31C01-01EN 277EJA310E Absolute Pressure Transmitter GS 01C31D01-01EN 297EJA430E Gauge Pressure Transmitter GS 01C31E01-01EN 309EJA440E Gauge Pressure Transmitter GS 01C31E02-01EN 323EJA510E and EJA530E Absolute and Gauge Pressure Transmitter GS 01C31F01-01EN 335EJA118E Diaphragm Sealed Differential Pressure Transmitter GS 01C31H01-01EN 345EJA118E/Z Diaphragm Sealed Differential Pressure Transmitter GS 01C31H01-11EN 367EJA437E Diaphragm Sealed Gauge Pressure Transmitter GS 01C31J03-01EN 385EJA438E/Z Diaphragm Sealed Gauge Pressure Transmitter GS 01C31J03-11EN 405EJA-E Series Foundation Fieldbus Communication GS 01C31T02-01EN 421EJA-E Series HART 5/HART 7 Communication GS 01C31T01-01EN 427

Pressure DP Flow 431EJX910 Multivariable Transmitter GC 01C25R01-01EN 433EJX930A Multivariable Transmitter GS 01C25R04-01EN 457FSA120 Flow Configuration Software GS 01C25R51-01EN 481EJX115A Low Flow Transmitter GS 01C25K01-01E 485EJA115F Low Flow Transmitter GS 01C31K01-01EN 497EJX115 and EJA115E Low Flow Transmitter with Integral Flow Orifice TI 01C20K00-01E 509

Pressure Accesoires 519Diaphragm Seals EJA and EJX Series Pressure Transmitters supplied by Badotherm GS 06P01Y01-E-E 521Diaphragm Seals EJA and EJX Series supplied by WIKA GS 08S01Y01-E-E 553Manifolds Supplied by Parker GS 07R01Y01-E0E 569

Temperature Transmitters 577YTA50 Temperature Transmitter GS 01C50C01-00EN 579YTA70 Temperature Transmitter GS 01C50C03-00EN 583YTA80 Temperature Transmitter GS 01C50C04-01E 587YTA110 Temperature Transmitter GS 01C50B01-00EN 589YTA310 & YTA320 Temperature Transmitter GS 01C50B02-00EN 599YTA Series Temperature Transmitter with HART Communication GS 01C50T01-00EN 609YTA Series Temperature Transmitter with Foundation Fieldbus Communication GS 01C50T02-00EN 611

Tabl

e of

Con

tent

sTable of Contents

3

General

Temperature Assemblies 615YTE Series Temperature Assemblies supplied by WIKA GS 09S01Y01-E-E 617

Field Wireless Transmitters 629EJX110B, EJX130B & EJX430B Differential Pressure and Pressure Transmitters GS 01C27B01-01EN 631EJX210B Flanged Mouted Differential Pressure Transmitter GS 01C27C01-01EN 651EJX118B and EJX438B Diaphragm Sealed Differential Pressure

and Gauge Pressure Transmitter GS 01C27H01-01EN 667EJX510B and EJX530B Absolute and Gauge Pressure Transmitter GS 01C27F01-01EN 685YTA510 Temperature Transmitter GS 01C50E01-01EN 695YTMX580 Multi-Input Temperature Transmitter GS 04R01B01-01EN 705

Field Wireless Network 717YFGW410 Field Wireless Management Station GS 01W02D01-01EN 719YFGW510 Field Wireless Access Point GS 01W02E01-01EN 727YFGW610 Field Wireless Media Converter GS 01W02D02-01EN 737YFGW710 Field Wireless Integrated Gateway GS 01W01F01-01EN 741

Flowmeters 747Magmeter Handbook Yokogawa Flow Solution BU 01E00A00-21EN 749

Coriolis Mass Flowmeters & Density meters 753ROTAMASS 3 series Coriolis Mass Flow and Density Meter GS 01R04B04-00E-E 755ROTAMASS 3 Series Multivariable Coriolis Mass Flow, Volume Flow

and Density Meter to Custody Transfer Applications GS 01R04B07-00E-E 785ROTAMASS 3 Series Coriolis Mass Flow and Density Meter FOUNDATION Fieldbus

Communication Type GS 01R04B05-00E-E 811ROTAMAS Coriolis Flowmeter Handbook BU 01E00A00-21EN 839

Magnetic Flowmeters 865ADMAG AXF Magnetic Flowmeter Integral Flowmeter Remote Flowtube GS 01R20D01-00E-E 867ADMAG AXF/Z Magnetic Flowmeter Remote Flowtube

for Pulp & Paper Digester Applications A90-TCS-283 921ADMAG AXFA11G Magnetic Flowmeter Remote Converter GS 01R20C01-00E-E 931ADMAG AXFA14G/C Magnetic Flowmeter Remote Converter GS 01R20C02-00E-E 939ADMAG AXF Series FOUNDATION Fieldbus Communication Type Magnetic Flowmeter GS 01E20F02-01E 951ADMAG AXF PROFIBUS PA Communication Type Magnetic Flowmeter GS 01E20F12-01E 955ADMAG AXR Two-wire Magnetic Flowmeter Integral Flowmeter GS 01E30D01-01EN 959ADMAG RXF Magnetic Flowmeter Integral Flowmeter Remote Flowtube GS 01R21D01-00E-E 995ADMAG RXFA11G Magnetic Flowmeter Remote Converter GS 01R21C01-00E-E 1023ADMAG RXFA14G Magnetic Flowmeter Remote Converter GS 01R21C02-00E-E 1031ADMAG Magnetic Flowmeter Handbook A90-TCS-428 1039

Rotameters 1067RAMC Metal Short-strokeRotameter GS 01R01B02-00E-E 1069RAKD Small Metal Rotameter GS 01R01B30-00E-E 1093RAGN Glass Rotameter GS 01R01B10-00E-E 1111RAGK Glass Rotameter GS 01R01B07-00E-E 1119RAGL Glass Rotameter GS 01R01B08-00E-E 1127RAQN Plastic Rotameter GS 01R01B04-00E-E 1135

Ultrasonic Flowmeters 1139US300FM Ultrasonic Flowmeter GS 01G05B03-01E 1141US300PM Ultrasonic Flowmeter, Portable type GS 01G05B02-01E 1151

Vortex Flowmeters 1159DigitalYEWFLO DY Vortex Flowmeter (made in Germany) GS 01R06A00-01E-E 1161Digital YEWFLO DY Vortex Flowmeter (made in China) GS 01F06A00-01EN 1197Digital YEWFLO DY FF Vortex Flowmeter FOUNDATION Fieldbus Comumunication

Type Vortex Flowmeter GS 01F06F01-01EN 1241

Table of Contents

Table of Contents

4

Gen

eral

The 2014 edition of this catalog is made by:Yokogawa Europe Industrial Automation division,Martin Klaassen, Simon Hatch & Emmanuel de Montilet

DTP and realisation, Jaap van der Heijden

Please check for latest editions on http://www.yokogawa.com/eu/

General Asset Management

5

General

Asset Managem

ent

6

Gen

eral

Asse

t Man

agem

ent

6

Fieldmate Versatile Device Management Wizzard GS 01R01A01-01E

GeneralSpecifications

FieldMate Versatile Device Management Wizard

Yokogawa Electric Corporation2-9-32 Nakacho, Musashino-shi, Tokyo 180-8750, JapanTel: 81-422-52-4443 Fax: 81-422-52-2018

GS 01R01A01-01E

GS 01R01A01-01ECopyright June 2006

10th Edition May 17, 2013

1. FeaturesFieldMate is available in a and an version with differentiated features provided.FieldMate Basic is used for the field device setting and adjustment, which must be connected for all activities.FieldMate Advance adds off line database function for up to 300 devices which maintains a complete record for all device configuration and maintenance activities. FieldMate is a PC based configuration tool that per-forms numerous tasks, including initial setup, daily maintenance, troubleshooting, and configuration back-up for device replacement. These tasks are stream-lined by FieldMates intuitive operation and integrated environment, which is independent from communica-tion protocols and device vendors.FieldMate incorporates the open FDT/DTM standard and is compliant with DTMs per the FDT 1.2/2 stand-ard. FieldMate supports by Built-in DTM interpreting the existing Device Description (DD) instaneously, for other vendor's devices that do not have DTMs available.* FDT: (Field Device Tool) is a frame application that standardsizes the communication and configuration interface between all field devices and host systems.

* DTM: (Device Type Manager) is the application which defines the Graphical User Interface (GUI) specific to the device.

The FDT frame is an integral part of FieldMate. Many DTMs are included with the FieldMate application, and additional DTMs are available from most field device vendors.

2. Functional Details

Segment Viewer

FieldMate Basic Advance

Device Viewer

DTM Works

Parameter Manager

DD Menu

History

3rd Party Device DTM

Device Maintence Info

Device Navigator

User Management

3rd Party COMM DTM

Serial Number Acquisition

Device Replacement Tool

AXF Verification

PRM Synchronization

F001.ai

n Communication FunctionFieldMate supports the following communication protocols:l BRAINl FOUNDATIONTM fieldbus H1l HART (HART7 is supported)l PROFIBUS l ISA100.11a

It conforms to ISA (International Society of Automation) 100.11a which has been progressed as the standards of Wireless system for Industrial Automation.

n Device Interface FunctionSegment Viewer: BRAIN, FOUNDATION fieldbus H1, HART, PROFIBUS, ISA100.11a*1Displays a list of devices currently connected on the communication lines, grouped by protocol.Basic device specific information is displayed de-pending on protocol (Device ID, Manufacturer ID, address, Device type, Device revision, and status)*1 It displays either via gateway or infrared communica-

tion.Device Viewer: FOUNDATION fieldbus H1, HARTDisplays the current status of the field device, includ-ing errors, warnings and good status. The status display icon (red, yellow, green) clearly indicates the devices self-diagnostic status.

R2.06

7

General

Asset Managem

ent

8

Gen

eral

Asse

t Man

agem

ent

2

All Rights Reserved. Copyright 2006, Yokogawa Electric Corporation

GS 01R01A01-01E Oct. 16, 2012-00

n Device Interface FunctionSegment Viewer: BRAIN, FOUNDATIONHART, PROFIBUS, ISA100.11a*1Displays a list of devices currently connected on the communication lines, grouped by protocol.

-pending on protocol (Device ID, Manufacturer ID, address, Device type, Device revision, and status)*1 It displays either via gateway or infrared communica-

tion.Device Viewer: FOUNDATION

-ing errors, warnings and good status. The status display icon (red, yellow, green) clearly indicates the devices self-diagnostic status.

n

l DTM Works: BRAIN, FOUNDATION HART, PROFIBUS, ISA100.11a

easy setup, calibration, simulation wizards etc. as

l Parameter Manager: FOUNDATION HART

The Parameter Manager is a simple parameter view-

easily, and stored on the PC for future needs.

l DD Menu: FOUNDATION

n History FunctionLogs of operations are automatically recorded.1) Date & Time2) Device Tag3) Device ID4) User5) Source: DTM works, DD Menu, Parameter Man-

ager, etc.

change) and System (logs of login, etc.).7) Message: Details log of changes

n 3rd Party DTM FunctionThis function provides device interface in compliance

device vendors DTM.

l Device Replacement ToolApplicable device: HART EJX and EJA seriesUploads the device parameters and converts them for use by the replacement device. Applicable parameters: Tag, Long Tag, Descriptor, Message, LRV, URV, Unit, Press Damp, Xfer func-tion, etc.

n Device Interface Function

l Device Navigator Shows all registered devices. Provide a searching function by tag, device name, memo, etc.

be implemented from Segment Viewer/Device Navi-gator

issues etc., simplifying daily maintenance.

n Database Function

l Device Maintenance Info.Provides advanced maintenance information consist-ing of:- Device Information- User memo- Document link- History- Parameter- DTM dataAll information can be exported / imported, and can be saved as a Device Template.- Parameter Manager- DTM worksParameters may be loaded from or saved to the of-

n User managementProvides simple security and activity logging by

password. The user ID is incorporated as part of the device maintenance history.

n 3rd Party COMM DTM supportProvides advanced connections and communication networking enabling:

- Access PROFIBUS-PA/DP devices- Access HART devices via PROFIBUS- Access 3rd Party multiplexers.

in FDT project.

l Serial Number AcquisitionApplicable device: HART EJX and EJA seriesAcquires serial number of the device and updates it in the Device Maintenance Information. Also exports

- Serial Number- Device Tag- Device ID- Device Revision

l

be printed and stored in the Device Maintenance Information.Applicable device: HART Magnetic Flowmeter AXF series

Remarks : AM012 Calibrator, CA150 HANDY CAL (or equivalent device) and Insulation checker

l PRM (Plant Resource Manager) SynchronizationSynchronizes information between FieldMate and PRM to make use of PRM as a master data base.

9

General

Asset Managem

ent

3

All Rights Reserved. Copyright 2006, Yokogawa Electric Corporation GS 01R01A01-01E Oct. 16, 2012-00

3. Connection Example (for reference)

[Required Components]

l BRAIN or HART EJA Pressure Transmitter.

l 24 V DC Power supply

l Load Resistor

l USB FieldMate Modem: BRAIN/HART

PC/FieldMateUSB

USBFieldMateMODEM

LoadResistor

24VDC Power Unit

SUPPLY CHECK+ + -

+ -

EJA

F002E.ai

4. System RequirementsSoftware Operating EnvironmentOS Windows 7 Professional, Home Premium 32bit/64bit SP1 or later

OS LanguageOS Windows Vista Business 32bit SP2 or later

OS LanguageHardware Operating Environment

Windows 7 Windows Vista PC IBM PC/AT CompatibleCPUMain Memory 2GB or more 1GB or more

(2GB or more recommended)Hard Disk Drive 8GB or moreDVD-ROM Drive Windows 7 compatible Windows Vista compatible Display 1024768 or better resolution

recommendedWindows 7 compatible

1024768 or better resolution recommended

Windows Vista compatibleNetwork portBRAINHART

Interface One USB port USB2.0 standardModem USB FieldMate Modem: BRAIN/HART(Yokogawa Option)

FOUNDATION Interface One PCMCIA card slotInterface board PCMCIA-FBUS Series 2 (National Instruments)Driver NI-FBUS Communications Manager 4.1 or later

FOUNDATION Interface One USB port USB2.0 standardInterface hardware FFusb (Softing) V1.31 or later *2

PROFIBUS Interface One USB port USB2.0 standardInterface card & COMM DTM

PROFIusb and PROFIdtm (Softing) PROFIdtm DPV1 V5.45 or later

DP/PA coupler KFD2-BR-A.PA.93 (Pepperl+Fuchs)6ES7 157-0AC80-0XA (SIEMENS)

HART Interface Bluetooth 2.0Modem VIATOR Bluetooth Interface: Model 010041(MaCTek ) *3

ISA100.11a *4 Interface One USB port USB2.0 standardModem Infrared Adapter:ACT-IR224UN-LN96-LE 9600bps (ACTiSYS) *5Driver Version 1.2.10 or later

ISA100.11a *6 Interface One Ethernet portLoginAccount Administrator privilege

*1 Interface is selectable*2 The package is provided complete with FieldMate driver from Softing

*3 Microsoft supplied Bluetooth stack is used *4 ISA100.11a OOB infrared communication *5 Holder for Infrared Adapter is available (recommended): Gorillamobile Original: GM1 (JOBY, Inc).

*6 ISA100.11a communication via gateway

10

Gen

eral

Asse

t Man

agem

ent

4


GS 01R01A01-01E

6. External ViewExternal view of USB FieldMate modem: BRAIN/HART

4618

83

Unit : mm

F003.ai

Fig. 3: USB FieldMate Modem

Total cable length: Approximately 2.3m

Techinical Specifications USB InterfaceSOFTWARE

USB Interface USB2.0 standard *1ELECTRICAL

Power Supply System powered by USB PortSupply Current 40mA@ + 5 VPins to Computer USB Type-A connector

Pins to Device2-pin, polarity insensitive Mini-grabber test clips. Detachable alligator clips addtionally

Output Level (HART) 0.5 + / - 0.1 Vpp trapezoidal wave@1200/2200 Hz

Output Level (BRAIN) 1.0 + / - 0.1 Vpp trapezoidal wave@2400 Hz

Isolation(DC) 1910 VDC between instru-ment and computerIsolation(AC) 1350 Vrms (50Hz)

ENVIRONMENTALOperating Temperature 0 C to 55 CStorage Temperature -40 C to 70 CStorage Humidity 0% to 95% relative humidity

PHYSICAL DIMENSIONS

Enclosure 83 x 46 x 18 mm, ABS indus-trial enclosure

Device Interface Cable190 cm, 2-conductor terminating with two mini grab-ber clips

USB Cable 27 cm cable terminating in a USB type A connector*1: USB2.0 also covers USB1.1

May 17, 2013-00

5. Model and Suffix CodesField device management software package: FieldMate Release: R2.06

MODEL, SUFFIX CODES

Model Suffix Codes Description RemarksFSA110 FieldMate BasicLicense -S Single PC license License number issued

1 Always 1Language 1 Always 1 *2Option Code /B USB FieldMate Modem BRAIN/HART

CD-ROM (FieldMate Software Media): F9197DS *1DVD-ROM (Device Files Media): F9197DT *1USB FieldMate Modem (BRAIN and HART protocols): F9197UC

MODEL, SUFFIX CODES

Model Suffix Codes Description RemarksFSA111 FieldMate AdvanceLicense -S Single PC license License number issued

1 Always 1Language 1 Always 1 *2Option Code /B USB FieldMate Modem BRAIN/HART

/VF AXF Verification ToolCD-ROM (FieldMate Software Media): F9197DS *1DVD-ROM (Device Files Media): F9197DT *1USB FieldMate Modem (BRAIN and HART protocols): F9197UC

*1 Replacement disk only*2 With an English Windows OS, FieldMate English can be installed. With the following Windows OS, either FieldMate with the following language or FieldMate English can be

installed. Japanese, Chinese (simplified), German, French, Russian

11

General

Asset Managem

ent

5

All Rights Reserved. Copyright 2006, Yokogawa Electric Corporation GS 01R01A01-01ESubject to change without notice.

EMC Conformity Standards , , EN61326-1 Class A, Table1 (Basic immunity test requirement) KC Mark

Registration No: KCC-REM-YHQ-EEN260

7. Included ItemsFieldMate includes the following items:

l CD-ROM: FieldMate Software Medial DVD-ROM: Device Files Medial USB FieldMate modem: BRAIN/HART w/ cables (optional)l License number sheetl Getting StartedPlease download Users Manual via Yokogawa Web site http://www.yokogawa.com/fld/doc/manual/fld-fieldmate-manual-01en.htm

8. Items Contained in Median Items contained in the Media of FieldMate R2.06:CD-ROM: FieldMate Medial FieldMate Programl USB modem driverDVD-ROM: Device Files Medial Device DTM for Yokogawa devices

-BRAIN-FOUNDATION fieldbus H1-HART-PROFIBUS-ISA100.11a

l Device DTM for the HART devices *1l Built-in DTMs

-FOUNDATION fieldbus H1-HART-ISA100

l DD for the FOUNDATION fieldbus H1 devices *2l DD for the HART devices *1

*1: Devices registered with HART Communication Foundation, some DTM or DD may not be included.

*2: Devices registered with Fieldbus FOUNDATION, some DD may not be included.

Remarks: Yokogawa certifies the quality and operability only of DD

and DTM which have been registered by Yokogawa.

9. CompatibilityCompatibility between FieldMate and Device Files is indicated on the Web site at the following URL.http://www.yokogawa.com/fld/fieldmate/fld-fieldmate-systemreq-01en.htm#combi

10. User RegistrationFieldMate may be installed on a single PC using the license number provided. FieldMate may be used for up to 30 days without registration.For permanent installation, user registration is required. After registration an Activation Key is provided to the user. User registration may be done on the FieldMate User Registration web site.https://voc.yokogawa.co.jp/PMK/ The items required for user registration are the license number and Hard Disk serial number (Volume Serial Number) of the PC to which FieldMate is installed.

11. TrademarksAll brand or product names of Yokogawa Electric Cor-poration in this document are trademarks or registered trademarks of Yokogawa Electric Corporation.All other company brand or product names in this docu-ment are trademarks or registered trademarks of their respective holders.

May 17, 2013-00

12

Gen

eral

Asse

t Man

agem

ent

BT200 BRAIN Terminal GS 01C00A11-00E


BT200BRAIN TERMINAL

Yokogawa Electric Corporation2-9-32, Nakacho, Musashino-shi, Tokyo, 180 JapanTel.: 81-422-52-5690 Fax : 81-422-52-2018

GS 01C00A11-00EN

GS 01C00A11-00ENCopyright May 1994

4th Edition Apr. 20, 2012

As a portable terminal, the Model BT200 BRAIN TERMI-NAL is used in combination with equipment using braincommunication for setting, changing, displaying andprinting out parameters such as tag number, output mode,and range, through simultaneous communication. It alsomonitors I/O values and self-check results, sets constant-current output , and allows zero adjustments. The ModelBT200 BRAIN TERMINAL is used by connecting it between4 to 20 mA DC signal transmission lines of the equipmentor to a dedicated connector on the ESC (Signal ConditionerCommunication Card) when the system is started up ormaintained.

FEATURES Online monitoring and communication

The modulated communication signal does not interruptthe 4 to 20 mA DC signals during communication.

Common to all Yokogawas equipmentThe Model BT200 BRAIN TERMINAL works with allequipment that uses BRAIN communication.

Easy of useA large display (21 characters by 8 lines) eases setup andalteration procedures in English prompting interactivesequences.

Diagnostics/security with error messages Self-check function Security code protection of setpoints Low battery voltage alarm Automatic power-off

Printer (BT200-P00)Printer prints out tag numbers and other parameters on thespot.

Intrinsic safety (Only for a without printer type)CSA intrinsically safe approval.

STANDARD SPECIFICATIONS

Equipment Specifications

Applicable Equipment Remove:DPharpADMAGYEWFLOYTASignal Conditioner

Communication Signal Connection:Dedicated cable, 1.1 m long (3.6 ft)

Communication Line:Line length: Up to 2 km (1.24 mile) (0.75 to 1.25 mm2

instrumentation cable)Load resistance: 250 to 600 (including cable resistance)Load capacitance: 0.22 F or lessLoad inductance: 3.3 mH or lessPower line spacing: 15 cm (6 inch) or more (Avoid parallelwiring.)

EMC Conformity Standards , EN61326-1 Class A, Table2 (For use in industriallocations), EN61326-2-3

Display:LCD dot matrix, 21 characters8 lines

Controls:Membrane switches (four function keys, 20 generaloperation keys, and one power switch)

Printer (BT200-P00):Thermal paper type

Power Supply:Five AA 1.5 V dry alkali batteries (LR6/AM3 (N))For Intrinsic safety type; Fivedesignated batteries (see OPTIONS)

Dimensions:BT200-N00 . . . 22811051 mm

(9.04.32.0 inch)BT200-P00 . . . 32111061 mm

(12.64.32.4 inch)

Approximate Weight:BT200-N00 . . . 510 g (1.12 lb)BT200-P00 . . . 700 g (1.54 lb)

13

General

Asset Managem

ent

13

14

Gen

eral

Asse

t Man

agem

ent

2


GS 01C00A11-00EN Apr.20,2012-00

Functional SpecificationsBasic Functions:

Setup, alteration, and display of parameters BRAINcommunication.: constant current output: Zero point adjustment

Additional Functions: Batch upload/download of data Setpoint Protection:

Security code entry is required to alter setpoints. Battery Alarm:

An alarm message appearing on the LCD announceslow battery voltages.

Automatic Power-off:The terminal is switched off automatically if no keyaccess is made for approximately 5 minutes.

LCD contrast adjustment Printing (BT200-P00)

Printout Information All parameter lists Parameter list within each menu item Setup change data list Uploaded data list Display images Self check list

NORMAL OPERATION CONDI-TIONS

BT200-N00

Ambient Temperature:-15 to 55C (5 to 131F)

Ambient Humidity:5 to 95%RH at 40C (104F)

BT200-P00

Ambient Temperature:0 to 50C (32 to 122F)

Ambient Humidity:30 to 80%RH at 40C (104F)

STORAGE CONDITIONSAmbient Temperature:

-15 to 60C (5 to 140F)

Ambient Humidity:5 to 95%RH at 40C (104F)30 to 80%RH at 40C (104F) (with printer)

ACCESSORIES Communication Cable:

Two cables, one with alligator clips and one with IC clips(both snap-removable)

Five AA 1.5 V dry alkali batteries

Handy carry case

MODEL AND CODE

Model Suffix Codes Description

BT200 BRAIN Terminal

Printer-N . . . . . . . . -P . . . . . . . .

With no printerWith printer

00 . . . . . . Always 00

Options /T03E.EPS

. . . . . . . . . .

PART NUMBERS

Item Parts No.

Communication Cable

With IC clips F9182EA

With alligator clips F9182EB

with 5-pin connector F9182EE

Roll paper F9182DS

Handy carry case F9182BPT04E.EPS

15

General

Asset Managem

ent

3

All Rights Reserved. Copyright 1994, Yokogawa Electric Corporation GS 01C00A11-00EN Apr.20,2012-00

OPTIONS

Item Description Code

Communication Cable with 5-pin connector(*1)

for SC (Signal conditioner) /C1

Intrinsic Safety type(*1)(*2)(*3)

CSA Intrinsically safe approvalClass I, Groups A,B,C and D Temp. code T4 Vmax (in)=30 V, Imax (in)=165 mA, Pmax (in)=0.9 W, Ci=0, Li=730 F Vmax (out)=2 V, Imax (out)=22 mA, Pmax (out)=11 mW, Ca=3000 F, La=30 mH

/CS1

T05E.EPS

*1: Optional code /C1 cannot be combined with /CS1*2: Applicable only for Model BT200-N00.

The battery used in BT200 must be as follows.

F01E.EPS

Manufacture

DURACELL

Model

MN1500 (PC1500)

Type

Alkaline-maganese

Voltage

1.5 V

*3: Safety Barriers ParametersIoc28 V, Isc143 mA, Pmax889 mW

Intrinsically Safe Apparatus Connected with BT200Vmax(Voc of Safety Barrier)+2 VImax(Isc of Safety Barrier)+22 mAPmax(Pmax of Safety Barrier)+11 mW

CONNECTION METHOD

16

Gen

eral

Asse

t Man

agem

ent

4


GS 01C00A11-00EN Apr.20,2012-00

DIMENSIONSModel BT200-N00

Model BT200-P00

Ordering Information1. Model and suffix codes

Subject to change without notice.

17

General

Asset Managem

ent

YHC5150X Fieldmate Handheld Communicator GS 01R01A30-01EN-A

Yokogawa Corporation of America2 Dart Road, Newnan, Georgia U.S.A. 30265Tel: 1-800-258-2552 Fax: 1-770-254-0928

GS 01R01A30-01EN-ACopyright 2013

5th Edition

General Specifications

The YHC5150X FieldMate Handheld Communicator is the latest Intrinsically Safe HART communicator from Yokogawa Corporation of America. All HART field devices can be configured, polled, and trimmed utilizing a Windows-Embedded CE based system for faster processing and greater storage capacity. In addition, all options are standard, and no subscription is required. The YHC5150X is a full function, DD Direct, HART Communicator supporting Universal, Common Practice and Device Specific commands for commissioning, configuration, and maintenance operations.

FEATURED FUNCTIONS

Reads manufacturers DDs in their native format without the need for translations HART-compliant modem communicates with any registered or unregistered HART Device, including HART 6 and 7 Features an ergonomic, handheld design Enhanced 4.3 diagonal anti-glare touchscreen with color graphic display (no stylus required) Full QWERTY keyboard for commissioning new transmitters On Demand Help Menus and teachable device-specific short cuts More than twice the battery capacity of any handheld communicator Manage device information Integrated multi-language support

STANDARD SPECIFICATIONS MODEL YHC5150X

Processor and Memory: Microprocessor: 1 GHz Memory Internal Flash: 512 MB System Card: Up to 64 GB secure digital card (4 GB installed) RAM: 256 MB

Physical:Weight: Approximately 2.1 lbs (.91 Kg) with battery Display: VGA (480 X 272 pixels) color, 4.3 (10.9 cm) transflective display with anti-glare Touch screen Size: 30314248 mm [11.95.61.9 inch] Keypad: 52 keys including QWERTY keys 12 alphanumeric keys, tab key, backlight key, Power key, and 4 cursor-control (arrow) keys; Membrane design with tactile feedback

Power Supply / Charger:Battery: Rechargeable Lithium-Ion power module Battery Operating Time: 10 Hours continuous use 20 hours typical use, 100 hours standby/hibernate Battery Charger: Input Voltage 100-240 VAC, 50-60 Hz, Asian Adapters included US, European, and UK.

Connection: Battery Cradle HART: Two 4mm banana plugs (One common to HART)USB: Supporting up to 115 kbps

Environmental:Usage: +14F (-10C) to +122F (+50C) 0% to 95% RH (non-condensing) (for +32F ; 0 C) to +122F (+50C) Charge: +50 F (+10 C) to +104 F (+40 C) Storage: With Batteries -4F (-20C) to +131F (+55C) Without Batteries -4F (-20C) to +150F (+60C) Enclosure Rating: IP51 Shock: Tested to survive a 1 meter drop onto concrete

Shipping Weight:5 lbs (2.3 Kg) ; Varies by option

Certification: Class I, Division 1, Groups A,B,C,D; T4 (CULUS)II 1G Ex ia IIC T4 Ga (ATEX)Ex ia IIC T4 Ga (IECEx)

Model YHC5150X FieldMate Handheld Communicator

18

Gen

eral

Asse

t Man

agem

ent

All Rights Reserved. Copyright 2013, Yokogawa Corporation of America. Subject to change without notice. GS 01R01A30-01EN-A

Charging Cradle Connections

Display and Touchscreen

Full QWERTY Keyboard

Navigation Keys

HARTConnections

Dedicated Numeric Keypad

On/Off Key

19

General

Asset Managem

ent

All Rights Reserved. Copyright 2013, Yokogawa Corporation of America. Subject to change without notice. GS 01R01A30-01EN-A

YHC5150X FieldMate Handheld Communicator

Example Part Number: YHC5150X

YHC5150X Accessories

For more information, please visit us at www.yokogawa.com/us

1W-9A879 Docking Station w/ Universal Power Adapter (100 VAC to 240 VAC, 50-60 Hz)

1W-A900529-00014 HART Test Lead Kit - Standard banana plugs, Mini-grabbers, 250 Ohm resistor

1W-A36821 Resistor - Std size 250 ohm shunt (req'd for HART low resistance loops)

1W-9A820-1 Rechargeable Battery 9600mAh Li-Ion 1W-9P802 USB Cable - Communication from Docking Station to PC 1W-9P790 FieldMate Carrying Case - Custom soft case with integrated HART lead

compartment 1W-9P791 Hand Strap - Equipment protection equipment 1W-9P780 SD Card - Micro 1W-9P822 YHC5150X Series battery charger power cord (included w/ unit) 1W-9P823 7/64" Hex key wrench (included w/ unit). Fits the battery pack screws.

YHC5150X FieldMate Handheld Communicator

Standard Option

Includes: Docking Station w/ Universal Power Adapter, HART Test Lead Kit (Standard banana plugs, Mini-grabbers, 250 Ohm resistor), Rechargeable Battery, USB Cable, FieldMate Carrying Case, Hand Strap, SD Card, and Software (CD-ROM)

20

Gen

eral

Asse

t Man

agem

ent

SSS7700, SSS7710, SSS7711, SSS7720, SSS7750 Plant Resouce Manager GS 33Y05Q10-32E


Models SSS7700, SSS7710, SSS7711, SSS7720, SSS7750Plant Resource Manager

Yokogawa Electric Corporation2-9-32, Nakacho, Musashino-shi, Tokyo, 180-8750 JapanTel.: 81-422-52-5634 Fax.: 81-422-52-9802

GS 33Y05Q10-32E

GS 33Y05Q10-32ECopyright Jul. 26, 2006(YK)

13th Edition Apr. 17, 2013(YK)

GENERALPlant Resource Manager (PRM) is an asset management software tool for the digital network era. The PRM software manages field devices and maintenance work efficiently, and help reduce total cost of ownership (TCO) in an industrial plant.These packages support intelligent devices such as FOUNDATION fieldbus, HART, PROFIBUS, and ISA100 field wireless devices as well as conventional analog devices.

PRODUCT OVERVIEWPlant Resource Manager (PRM) consists of the following components:

PRM Server Collects and stores maintenance related data such as device parameters, device alarms, and inspection memo in

the field. Generates and manages centralized device information such as device lists, inspection schedules and records,

user-created electronic documents, and parts lists. Generates maintenance alarms for field device maintenance with action guidance information (problem, cause, and

action) and notifies these alarms to the people who need them.

PRM Client Provides device navigator windows in hierarchy tree view for monitoring and managing devices in a user-friendly

Windows-based operating environment. Performs automatic device recognition and registration (plug & play) by using full digital, bi-directional, field digital

networks such as FOUNDATION fieldbus, HART, PROFIBUS, and ISA100.11a. Monitors device health status with maintenance alarms and communication errors. With PRM Advanced Diagnostic Function, PRM also performs device status diagnosis, device parameter setting using device diagnostic tools (i.e. DeviceViewer, DTM Works, DD menu).

Displays status icons reflecting the communication and device status to let operators grasp the device status intuitively. A confirmation status icon appears for the devices with unacknowledged maintenance alarms (of the device health status).

Device icons to be displayed on the device navigator can freely be defined by a user. The user can customize those fonts and icons depending on the user requirements and the screen size.

Maintenance marks are a kind of flags to be assigned to devices for setting and checking maintenance status. The maintenance mark icon is displayed upon setting, and enables to temporarily change device access level. The maintenance marks can also be linked with CENTUMs operation marks so that the maintenance engineers and operators can share the same information and coordinate their work.

Performs online device adjustment/setting on screen using the same user interface with FieldMate versatile device management tool which is an on-site device adjustment/setting tool.

Possible to exchange parameters and maintenance information between PRM and FieldMate. Provides PRM advanced diagnosis application, device diagnosis data historian, and general-purpose diagnosis

tool for PRM advanced diagnosis function, in addition to the maintenance alarm function and device diagnostics function.

Allows registering conventional analog field devices as well as field digital devices such as FOUNDATION fieldbus, HART, PROFIBUS, and ISA100.11a, for a true, centralized device management.

Implements third-party calibration and diagnostic software tools as PLUG-IN applications. DeviceViewer (*1) and PLUG-IN ValveNavi are available from Yokogawa brand.

Supports FDT/DTM (Field Device Tool/Device Type Manager) and EDDL (Electronic Device Description Language) technologies that enable PRM interfacing with field devices.

*1: DeviceViewer is a PLUG-IN application of the PRM Client for self-diagnosis of field digital devices such as FOUNDATION fieldbus and HART. Download device definition files from each device vendor to run on the DeviceViewer prior to its use. DeviceViewer can be displayed on CENTUM VP/CS 3000 (R3.07 or later) HIS with operation and monitoring functions.

21

General

Asset Managem

ent

21

22

Gen

eral

Asse

t Man

agem

ent

2


GS 33Y05Q10-32E Apr. 17, 2013-00

Field Communications ServerThis is a server to set and acquire field device data online. It implements data exchange between the field devices and the PRM Client or the PRM Server. Those data are distributed among maintenance support applications such as device status monitoring, device parameter tuning, and device diagnostics. PRM supports various types of field communication protocols (FONDATION fieldbus, HART, PROFIBUS, and ISA100.11a) and the following system configuration types are available.

Supported hardware FOUNDATION fieldbus Communication Modules for CENTUM VP/CS 3000 AI/AO modules with HART communication for CENTUM VP/CS 3000 PROFIBUS Communication Module for CENTUM VP/CS 3000 FOUNDATION fieldbus Communication Modules for STARDOM AI/AO modules with HART communication for STARDOM PROFIBUS Communication Module for STARDOM AI/AO modules with HART communication for ProSafe-RS NI-FBUS card 3rd party HART multiplexers (Pepper and Fuchs, MTL, ELCON, and STAHL) 3rd party PROFIBUS communication devices (CommunicationDTM/GatewayDTM communications) Field Wireless Access Point and Field Wireless Management Station (CommunicationDTM/GatewayDTM

communications)

Multiple Server SwitchoverPRM manages CENTUM VP/CS 3000, ProSafe-RS, or STARDOM projects. It also provides an integrated monitoring for a large-scale project which is geographically distributed in remote locations. In case for the large-scale project where tens of thousands of field devices are installed, it is necessary to divide them into multiple numbers of PRM Servers. PRMs Multiple Server Function enables to select which PRM Server the PRM Client refers to. In this way, a single PRM Client is able to monitor several PRM Servers.

PRM Advanced Diagnosis Server Function (optional)This sever function provides an environment for executing diagnostic algorithms by utilizing field device parameters.The diagnostic algorithm application can be configured by using the PRM Advanced Diagnostic Software Development Kit (PAA-Development Kit) without any additional software program. By monitoring parameters and process data transmitted from field devices, the PRM Advanced Diagnosis Server Function configures and executes diagnosis of the devices and assets.For details of the PRM Advanced Diagnosis Server Function, refer to general specifications of SSS7740 PRM Advanced Diagnosis Server (GS 33Y05Q21-32E).

PST Scheduler Package (optional)PST(*1) stands for a partial stroke test. The PST Scheduler schedules PST, automatically executes PST in accordance with the schedule, and manages the results in unified manners. It is possible to modify the planned schedules and switch PST execution from automatic to manual.For details of the PST Scheduler Package, refer to general specifications of SSS7780 PST Scheduler Package (GS 33Y05Q23-32E).

*1: By slightly operating emergency shutdown (ESD) valves online which are not activated under normal conditions, PST is to check if ESD valves function correctly in case of emergency. By using PST, the interval period between full stroke tests can be prolonged without disturbing the safety of the ESD valves, thus the maintenance cost for those ESD valves can be reduced.

Interface for Computerized Maintenance Management System (optional)PRM has an interface with Maximo, a Computerized Maintenance Management System (CMMS), from IBM Software, Inc. It enables PRM to provide maintenance information to the maintenance management system online. For details of the CMMS interface, refer to general specifications of SSS7730 Interface for CMMS (GS 33Y05Q20-32E).

Interface for GE Energys System 1 (optional)PRM is able to provide a single monitoring window for diagnosis of turbines, rotating equipment and reciprocating equipment under management by GE Energys System 1 Optimization and Diagnostics Software Platform in addition to field devices such as pressure transmitters and flowmeters.For details of System 1 integration, refer to general specifications of SSS7770 Interface for GE Energy System 1 (GS 33Y05Q22-32E).

23

General

Asset Managem

ent

3

All Rights Reserved. Copyright 2006, Yokogawa Electric Corporation GS 33Y05Q10-32E Apr. 17, 2013-00

SYSTEM CONFIGURATIONPRM manages a PRM Server as one unit. The PRM system can be configurable in scalable ways a minimum system consists of a PRM Server, Field Communications Server and a PRM Client all resided in a single PC, and a large system with multiple clients. Examples of PRM system configurations are shown in this section.

System configurationCENTUM VP/CS 3000

CENTUM HISExaopcOPC Interface for HIS

PRM Client

PRM Server

Ethernet

Ethernet

Control network

HART devices

AnalogHART I/O Module

ALP121

PROFIBUS-DP

Field devices

FieldMate

ALF111

FCS

F01E.ai

Terminator

YFGW410Field WirelessManagementStation

FOUNDATION fieldbusPower Supply + Terminator

YFGW410Field WirelessManagement

Station

Firewall

L3 Swittch

Wide-area field network

Field wireless devicesHIS: Human Interface StationFCS: Field Control StationALF111: FOUNDATION fieldbus Communication Module

Field devices

Field wireless devices

(*1)

ALE111

ALE111: Ethernet Communication ModuleALP121: PROFIBUS-DP Communication Module

Figure: System Configuration (CENTUM VP/CS 3000 systems)

Note: A PRM Server, a PRM Client and a Field Communications Server can run on a single PC. PRM client can run on the same PC where HIS/ENG is already installed.*1: Process data and diagnosis status can be displayed on HIS. As for configuration of ISA100.11a field wireless, see GS 01W01A01-01EN Field Wireless System Overview.*2: ALP121 is supported by CENTUM VP R5.02 or later revision.

24

Gen

eral

Asse

t Man

agem

ent

4


GS 33Y05Q10-32E Apr. 17, 2013-00

STARDOMMessages from STARDOM controllers are transmitted to a PRM server via an OPC Server. FCN/FCJ OPC Server for Windows (a software package) is required.

HMI Client

FCN/FCJ

HMI serverData server

OPC server

Control Network

Ethernet

FCN

PCPRM Client

PCPRM ServerField Communication Server

Logic Designer Resource Configurator

Controller

VDS/HMI PRM

CPU NFLF111PSUFCJ

(with FOUNDATION fieldbus H1 port)

F10E.ai

FOUNDATION fieldbus H1 Fieldbus

FOUNDATION fieldbus H1 Fieldbus

Terminator

Coupler

Terminator

Coupler

Field Wireless devices

YFGW410Field Wireless ManagementStation

YFGW510Field WirelessAccess Point

HART I/O module

PROFIBUS-DP

HART device

FCNController

PSU NFAI141

CPU NFAI841

NFAI835

NFAI135

PROFIBUSslave device

NFLP121

CPU

FieldMate

VDS: STARDOM Versatile Data ServerHMI: Human Machine InterfaceFCU: STARDOM Autonomous Cotroller (field control node)FCJ: STARDOM Autonomous Controller (field control junction)NFLF111: FOUNDATION fieldbus Communication ModuleNFAI***: Analog I/O Modules (with HART communication function)NFLP121: PROFIBUS-DP Communication Module

Figure: STARDOM System Configuration

Note: A PRM Server, a PRM Client and a Field Communications Server can run on a single PC. A PRM Client and an HMI client can run on the same PC. A PRM Server or a Field Communication Server cannot run on the same PC where VDS is already installed.

25

General

Asset Managem

ent

5


Notes for STARDOM configuration:PRM packages cannot be installed on a PC where STARDOM Versatile Data Server (VDS) is already installed.It is recommended to install FCN/FCJ OPC Server for Windows package on a different PC separately from PRM packages.Refer to the below table for combination of the software revision numbers when installing FCN/FCJ OPC Server for Windows package on the same PC with PRM. Those combinations other than shown here, FCN/FCJ OPC Server for Windows must be installed on a different PC separately from PRM packages.

FCN/FCJ OPC Server for Windows PRM

Revision R1.90 R3.02R2.20 R3.03, R3.04

R3.01 to R3.10 R3.05

R3.10

R3.20 R3.11

Up to 100 units of FCN/FCJ controllers can be connected to a Field Communications Server. As for a large-scale system, use multi-server function to divide the number of controllers connected to a PRM Server by the group of 100 units or less.

ProSafe-RS

HISExaopc OPCInterface package for HIS

PRM ClientPRM ServerField Communications Server

Control Networkbus 2bus 1

F15E.ai

HART device

ProSafe-RS

HART I/OModule

SCS

SENG

SENG: Safety Engineering PCSCS: Safety Control Station

Figure ProSafe-RS System ConfigurationNote: A PRM Server, a PRM Client and a Field Communications Server can run on a single PC. A PRM Client and SENG can run on the same PC.

26

Gen

eral

Asse

t Man

agem

ent

6


GS 33Y05Q10-32E Apr. 17, 2013-00

Communication with HART devices via MultiplexerPRM can communicate with HART devices via HART multiplexer connected to the serial ports of the Field Communications Server.

Ethernet

Field Communications Server

PRM Client

HART devices

HART devices

HART devices

PRM Server

Control network

Analog I/O module

F05E.ai

FCS

HIS/ENG

HART multiplexer(3rd party)

RS CommunicationRS-485

(*1)*1: RS-485/ Ethernet converter or RS-232C/RS-485 converter

4-20 mA HART digital signals

HART devices

Figure Serial port connection via HART multiplexer (Parallel connection and two-way data flow)Note: A PRM Server, a PRM Client and a Field Communications Server can run on a single PC.

27

General

Asset Managem

ent

7


FUNCTIONAL SPECIFICATIONS Organization of FunctionsThe following figure shows organization of functions.

Device Navigator

PRM

Maintenance Information Management

Audit Trail Management

Adjustment and Diagnosis

Other Functions

Plant ViewNetwork ViewClass ViewCustom View

Device MasterInspection MemoInspection ScheduleParts ListLink to Document

Parameter setting and tuning - DTM Works - Parameter mangerFF DD menu windowDeviceViewerCalibration management (Optional)

Operation LogEvent Log of DeviceInspection LogRecord filtering

PRM Advanced Diagnosis (Optional)

BrowserSecurityExportSelf-documentationPLUG-IN ApplicationDevice TemplateDatabase Maintenance ToolPRM System BackupOnline ManualFieldMate Synchronization

Diagnostic NavigatorPRM Advanced Diagnosis Application (PAA)Device Diagnosis Data HistorianGeneral-purpose Diagnosis Tool

Maintenance Alarm

Message AcquisitionDevice PatrolFiltering

Maintenance Mark

PST Sheduler (Optional)

Interface for GE Energy System 1 (Optional)

PRM Advanced Diagnostic Application SoftwareDevelopment Kit (Optional)

Interface to Computerized Maintenance Management System (Optional)

F03E.ai

Figure: Organization of Functions

28

Gen

eral

Asse

t Man

agem

ent

8


GS 33Y05Q10-32E

Device NavigatorProvides four different views - plant view, network view, class view, and custom view.Each view displays devices in a plant in the form of a plant hierarchy tree view, in the Windows explorer-like format. In these views, device status is shown with icons utilizing the maintenance alarm function so that operators are able to judge the status of the devices at a glance. Where there are devices with unacknowledged maintenance alarms, unacknowledged alarm icons are displayed.User access can be restricted based on the device navigator hierarchy, which prevents unauthorized personnel from operating devices by mistake.

Plant viewDisplays devices and equipment modules in the plant in hierarchy tree view according to the actual structure of the plant, or plant layer. Not-in-use devices can be allocated either to the Spare folder for spares and failed or in-service devices to the Out Of Service folder.

Network viewDisplays the network hierarchy of devices connected to the field network in the tree view form.

Class viewArranges devices in a tree view by vendors, models, and revisions. Users can identify the status of how spare devices are used while devices-in-use are failed or under maintenance. Device templates can be created using this function.

Custom viewUser-created views can be created and displayed in the hierarchical structure. Devices can be categorized by the persons in charge of maintenance, by inspection or replacement schedule, operation or failure status, and so on.

Maintenance Mark Assign maintenance mark to each device electronically to let maintenance engineers identify the status of a device. Enabled to link it with CENTUMs operation marks so that maintenance engineers and operators can share the same information and coordinate their work.

Maintenance Alarm FunctionThis is a message system to notify maintenance information and guidance messages. It broadcasts information necessary for device maintenance to all the maintenance engineers. The information contains not only messages generated by the devices, but also attributes such as message information, phenomenon, causes, and actions. Alarms generated by diagnostic functions can also be delivered to the users.

Message acquisitionAcquires messages from field digital devices as well as event messages generated by CENTUM, STARDOM ProSafe-RS, and third-party systems. User-defined information such as event priorities, objective information, phenomenon, causes, and actions are automatically added to the original event messages. These are acknowledged as maintenance alarms, and passed on to the filtering function.

Device patrolAcquires field device status provided by devices self-diagnostics and generates maintenance alarms with the user-defined attributes such as message priorities, objective information, phenomenon, causes, and actions. These maintenance alarms are handed over to the filtering function. Data acquisition is done periodically or on demand. It also collects information from devices which do not generate alarm messages by themselves.

Filtering functionAll the alarms generated by message acquisition, device patrol, advanced diagnostic application, and manually-entered messages are filtered and the results can be notified by each users.

Mar. 1, 2011-01

29

General

Asset Managem

ent

9


Maintenance Information ManagementPRM acts as the central database for device maintenance information.

Device masterGenerates and manages a list of devices with all the relevant information. Users can display the list of all the devices or detailed information of the individual device. As for devices with field communication function, it is added to the device list automatically by plug & play upon recognition of the devices.

Inspection memoIncludes details of inspection, maintenance, or servicing tasks performed on a device or at a plant. Comments and remarks by maintenance engineers during servicing or maintenance can also be included as the service logs.

Inspection scheduleManages schedule information such as inspection, adjustment, and calibrations by each device.

Parts listContains components and attribute information of parts that compose of a device. As for Yokogawa field devices with digital network communication function, dedicated templates are provided.

Document linksManages device related documents such as plant structures (e.g. P & ID and control drawings), component spare parts list, online instruction manuals, and device images and enables users to access them by the device tag name as keys. These documents can be stored in a document server on an Ethernet and accessed by URL addresses.

Audit Trail ManagementManages and displays historical records of PRM operations, inspection records, and event information generated by the maintenance alarm function on the PRM client. These historical records can be shown by chronological orders, device priority, or message priority. With filtering function, the records can be displayed by the device IDs or device tag names.

Adjustment and Diagnostic FunctionsSupports devices adjustment and diagnostic functions online.

Parameter tuning and comparisonSets and displays device parameter online. With this function, PRM compares the saved and the actual parameters. The parameter set values are saved as logs. The device data can be uploaded and stored to the database at any time. PRM also supports one-time uploading of all the connected devices.

Tools For FOUNDATION fieldbus communication It switches to DeviceViewer, DD menu, DTM Works,

and PRM Advanced Diagnostic Function.

DD menu: Using DD files provided by vendors, PRM implements device diagnostics and parameter tuning and setting, and calibrations. The specifications of the DD files are different by the field devices.

DeviceViewer: A PLUG-IN application to display device self-diagnostic results. Most of the field devices hold self-diagnostic results as the vendor-specific parameters. DeviceViewer reads those self-diagnostic results and displays them in user-friendly ways. It also displays device information that is usually displayed on the LCD of the devices. This function enables users to remotely monitor the devices connected to PRM without viewing the local LCDs.

For HART communication It switches to DeviceViewer, DTM Works, and PRM

Advanced Diagnostic Function.

DeviceViewer: Supports HART devices. Displays device status based on the self-diagnosis and setting status of the HART devices.

Calibration data managementPRM database manages and maintains device calibration data.Calibration results, differences, and judgment (pass or fail) are registered to the database and displays them on a PRM client. The calibration data approval function allows only the authorized person to modify the calibration data once it is approved. The modification of the calibration data is recorded as an operation history by the historical operation management function.When a documenting calibrator is used, the calibration data can be upload/download via communication. The calibration results are automatically saved into the database. The documenting calibrator connection is provided as optional.

30

Gen

eral

Asse

t Man

agem

ent

10


GS 33Y05Q10-32E

Other FunctionsBrowserSearches specific devices by the keywords of device attributes information such as device ID, device tag name, device tag comments, block name, and parameters.

SecurityDuring the maintenance of field devices, this function allows only authorized personnel to access PRM or limiting the scope of work so as to prevent troubles caused by mis-operations to happen or secure system safety.It asks a user to specify its user name so that the user can be traced back. The user names are recorded to the operation records. The user operations and its privileges are restricted by the user groups where they belong.By using the device security function, it is possible to display field devices on the device navigator only for the specified user group.

ExportA device list (device ID, device tag name, device tag comments, etc.) registered to the PRM database can be exported as a text file in CSV file format. With this function, PRMs device information can be utilized by asset management software or others.

Self-documentationOutputs the data stored in PRM database in a document format. This function enables to let users manage device-related information electronically and print out on demands. The information displayed on each window can also be printed out in a format to make it a maintenance report.The following printing properties can be edited. Printing range Table of contents Header and/or footer Cover page

PLUG-IN applicationsA PLUG-IN application is a third-party software program that runs with PRM. It runs on a PRM client PC and accesses to field devices and PRM database via PLUG-IN application library. Among all the PLUG-IN applications, Yokogawa offers two packages - DeviceViewer and PLUG-IN ValveNavi. PLUG-IN ValveNavi is a software program for YVP110 valve positioner complied with FOUNDATION fieldbus to calibrate and execute advanced diagnostics using signature function such as device diagnosis. Its functions are equivalent to YVP205, a stand-alone type ValveNavi. For more details of the ValveNavi functions, please refer to GS 21B04C50-01E YVP205 YVP Management Software.

Supported PLUG-IN applications DeviceViewer PLUG-IN ValveNavi for YVP110 (Rev. 2.1 or later) Other third party PLUG-IN applications approved by

Yokogawa.

Mar. 1, 2011-01

Device template functionProvides templates which a user can define device information of its own. These templates help simplify engineering work of individual device settings.

Database maintenance toolPRMs database size increases in accordance with the number of connected devices and over long period of operations. This is a tuning tool to archive, retrieve, delete and clean up the database to optimize the PRM database to be used efficiently. The data can also be automatically archived to an external storage media.

Online instruction manualAll the instruction manuals are provided in PDF format on a CD-ROM. Users are able to view and print the electronic instruction manuals on-demand.

PRM system back-up scriptEnables users to back up and restore the conditions of the PRM system appropriate for the user environment such as registry information, PRM database, advanced diagnosis database and so on.

Relevant SolutionField asset KPI reportThis is a solution tool for InsightSuiteAE service solutions aiming for monitoring, diagnosing, and optimizing customers plant assets.By using this tool, users are able to have a good understanding of the device conditions and prioritize maintenance activities by using condition-based maintenance approach which allows users to prepare a better maintenance workflow plan. For details, refer to GS 43D02S03-02EN for Field Asset KPI Report, and GS 43D02A03-02EN for InsightSuiteAE AE service & engineering.

31

General

Asset Managem

ent

11

All Rights Reserved. Copyright 2006, Yokogawa Electric Corporation GS 33Y05Q10-32E

MULTIPLE SERVER SWITCHOVERWith this function, asset management of multiple plants can be integrated. A server-set concept has been introduced and enables a PRM Client to switch from a Field Communications Server and a PRM Server to other servers. A user has to define the server-set before use. With this function, a PRM Client manages all the device management information of the multiple plants at a single location.

PRM can be connected with CENTUM, STARDOM, or ProSafe-RS systems on the same Ethernet.

Ethernet

Ethernet

Router

Control network

Server Set A

PRMClient

PRM Clientwith multiple serverswitchover function

F07E.ai

PRMServer

Switchover between server sets


HIS

FCS

Ethernet

Control network

Server Set B

PRMClient

PRMServer


HIS

FCS

Router

Figure: Multiple Server Switchover

Apr. 17, 2013-00

32

Gen

eral

Asse

t Man

agem

ent

12


GS 33Y05Q10-32E Apr. 17, 2013-00

Supported FunctionsAll the functions are available for use with FOUNDATION fieldbus devices, and there are several restrictions for HART, PROFIBUS, and wireless devices.

Table Supported Functions

Function Conventional

Devices(*1)

FOUDATION fieldbus

HART (*2)

ISA100.11a(*3)

PROFIBUS(*4)

Device Navigation Function

Plant View XX XX XX XX XXNetwork View XX XX XX XXClass View XX XX XX XX XXCustom View XX XX XX XX XX

Maintenance Mark XX XX XX XX XX

Maintenance Information Management Functions

Device Master XX XX XX XX XXPlug & Play XX XX XX XXRegister fromhost file set XX X X

Inspection Memo XX XX XX XX XXInspection Schedule XX XX XX XX XXParts List XX XX XX XX XXLink To Document XX XX XX XX XX

Audit Trail Management Function

Parameter History XX XX XX XXInspection Memo History XX XX XX XX XX

Operation History XX XX XX XX XXDevice Event Message XX XX XX (*5)

Adjustment and Diagnosis

Parameter Tuning and Comparison XX XX XX XX

Status Display XX XX XX XXTool XX XX Calibration XX XX

MaintennanceAlarm

Plant View XX XX XX XXNetwork View XX XX XX XXClass View XX XX XX XXCustom View XX XX XX XX

Other Functions

Browser XX XX XX XX XXSecurity XX XX XX XX XXPrinting XX XX XX XX XXPLUG-IN Application (*6) XX XX

FieldMate Synchronization XX XX XX

XX: Supported X: Partly supported : Not applicable*1: The conventional devices include 4 to 20 mA analog devices and static devices such as motors.*2: HART 5, 6, and 7 are supported, but Wireless HART is not supported.*3: Conforms to ISA 100.11a wireless system for industrial automation. (ISA = International Society of Automation)*4: Condition monitoring with device navigator is available for PROFIBUS PA device which conforms to PA profile. To find out if

the devices conform to PA profile, visit the PROFIBUS International web site or its device vendors.*5: PROFIBUS device event message is acquired via ALP111 or ALP121 PROFIBUS-DP Communication Module.*6: PLUG-IN ValveNavi and other applications.

33

General

Asset Managem

ent

13


OPERATING ENVIRONMENT Hardware RequirementsThe required main memory size and disk capacity depend on the number of registered devices. The minimum hardware requirement is described here when no more than 3000 devices are connected to a PRM Server. In case the system requires more than 3000 devices to be connected, please consult Yokogawa.In case the size of the required main memory differs between the Windows OS and the PRM packages (PRM Server, PRM Client, and Field Communications Server), apply the higher of the two values.The main memory sizes required by the applicable Windows OS are as described as below:

Table Required Main Memory Size by Windows OS

Memory Size OS

Minimum MemoryRequirement

Recommended(for better performance)

Windows Vista Business Edition 512 MB 1 GBWindows Server 2008 Standard EditionWindows Server 2008 R2 Standard Edition 512 MB 2 GB

Windows 7 Professional Edition 2 GB 4 GB

PRM ServerPC: IBM PC/AT-compatible machineCPU: Refer to the table below.Main memory: Refer to the table below.Hard disk space: Refer to the table below.Other requirements: DVD-ROM drive Ethernet cardDisplay resolution/colors: 256 colors or more

Table PRM Server Hardware Requirements (without Advanced Diagnosis Server)

Number of Devices 300 units or less 1000 units or less 3000 units or less

CPU Pentium - 1G Hz or higher (required)

Pentium - 1 GHz or higher (required)Pentium 4 - 2.8 GHz or higher (recommended)

Pentium 4 2.8 GHz or higher (required)Xeon Dual 2.8 GHz or higher (recommended)

Main memory

For Windows Server 2008: 2 GB or more (recommended)For other applicable Windows OS: 512 MB or more (required).

For Windows Server 2008: 2 GB or more (recommended)For other applicable Windows OS: 512 MB or more (required), or 1 GB or more (recommended).

For all applicable Windows OS: 1 GB or more (required) 2 GB or more (recommended)

Hard disk space (*1) 3 GB or more (required)

5 GB or more (required)Use of a high-speed disk drive such as SCSI or RAID drive is recommended.

10 GB or more (required)Use of a high-speed disk drive such as SCSI or RAID drive is recommended.

PRM Database capacity (*2) 600 MB 2 GB 6 GB

*1: The minimum free space required is inclusive of the database capacity specified in (*2).*2: Device database size covers the required size for one year. The size is calculated with the assumption that comparing and

saving the parameters of all devices and function blocks with Parameter Manager for 5 times per year.

PRM ClientPC: IBM/AT compatible machineCPU: Pentium 1 GHz or higherMain memory: 256 MB or more (required), 512 MB or more (recommended)Hard disk space: 2 GB or moreCommunication unit: Ethernet cardPeripheral devices: DVD-ROM driveDisplay resolution/colors: 1024 x 768 or higher, 256 colors or more

Apr. 17, 2013-00

34

Gen

eral

Asse

t Man

agem

ent

14


GS 33Y05Q10-32E Apr. 17, 2013-00

Field Communications ServerPC: IBM/AT compatible machineCPU: Pentium 1 GHz or higher In case of more than 2000 devices are connected, 2.8 GHz or higher is required.Main memory: Refer to the table below.Hard disk space: 1 GB or moreCommunication unit: Refer to the table below.Peripheral devices: DVD-ROM driveDisplay resolution/colors: 256 colors or more

Table Hardware Requirements for Field Communication Server

CENTUM VP/CS 3000 connection

system ProSafe-RS

connection system

STARDOM connection system

Simplified system for FOUNDATION

fieldbus H1 device adjustment

Simplified system for HART device adjustment or

system connected to HART multiplexer

commDTM/gatewayDTM

communication

Main memory (*1) (*2)

FCS/SCS 1-16 units (100+80 x number of FCS/SCS) MB or more recommended

FCN/FCJ 1-16 units (100+60 x number of FCN/FCJ) MB or more recommended 256 MB or more

required512 MB or more recommended

256 MB or more required512 MB or more recommended

256 MB or more required{30+(commDTM/gatewayDTM main memory)(No. of node)}MB or morerecommended

FCS/SCS 17-44 units (1380+10 x (number of FCS/SCS-16)) MB or more recommended

FCN/FCJ 17-100 units (1060+5 x (number of FCN/FCJ-16) MB or more recommended

Communication devices

Ethernet card Control bus interface card Control network interface card (VF702, VI702)

Ethernet card Ethernet cardFOUNDATION fieldbus H1 interface card

Ethernet cardCOM port Ethernet Card

*1: The specified hardware requirements do not include the requirement for third party CommDTM/GatewayDTM. Refer to the respective DTM documentation.

*2: The total memory requirement should be calculated by summing the memory requirement for each required function and connected system.

All-in-one configuration (when all components PRM Server, Field Communications Server, and PRM Client reside together in one PC)

PC: IBM/AT compatible machineCPU: The maximum CPU capability among the capabilities required for the respective packages, or higher.Main memory: Total sum of memory size required for the respective packages or the operating system (whichever is

higher), or more.Hard disk capacity: Total sum of available hard disk spaces required for the respective packages, in addition to a

virtual memory area of approximately 1 GB.Connectable number No. of stations: Maximum 24 of FCS/SCS or less. When the number of stations exceeds 24,

install PRM server and field communications server on separate PCs.Display resolution/colors: 1024 x 768, 256 colors or more

OPC server (for STARDOM system)PC: IBM PC/AT-compatible, Pentium 300 MHz or 400 MHz or faster recommendedMain memory: 256 MB or 512 MB or morerecommendedDisk capacity: There must be at least 1 GB of free space.Ethernet card: 100BASE-TX, 10BASE-T, 10BASE-5

For STARDOM connection, two communication devices are required to segregate information and control networks.

35

General

Asset Managem

ent

15


Software RequirementsPRM Server, PRM Client, and Field Communications Server

Windows XP Professional

Windows Server 2003

Windows Server 2003 R2

Windows Vista Business Edition

Windows 7 Professional

Windows Server 2008

Standard

Windows Server

2008 R2 Standard

32-bit 32-bit 32-bit 32-bit 64-bit 32-bit 64-bitSP2 SP3 SP1 SP2 SP2 SP1 SP2 SP1 SP2 SP1

R3.01 X N/A X N/A X N/A N/A N/A N/A N/A N/A

R3.02 X N/A N/A X N/A X N/A N/A N/A N/A N/A

R3.03 N/A X N/A X N/A X X N/A N/A N/A N/A

R3.04 N/A X N/A X N/A X X N/A N/A N/A N/A

R3.05 N/A X N/A X N/A X X X N/A X N/A

R3.10 N/A N/A N/A N/A N/A N/A N/A X X X X

R3.11 N/A N/A N/A N/A N/A N/A N/A X X X X

SP: Service Pack X: Applicable N/A: Not applicable

PRM ServerMicrosoft SQL Server 2008 R2 (Runtime) is used as a database software and is included in the software media for Plant Resource Manager.Internet Explorer 8.0 or 9.0

PRM ClientSoftware for document: Adobe Reader 9.4 or XField Communications Server

Driver: When PRM is connected with CENTUM VP/CS 3000 and/or ProSafe-RS, a control network driver is required. (*1)

For simplified system for FF-H1 dvice adjustment, FF-H1 fieldbus interface card driver is required. And for communicating with devices via third-party gateway devices, third-party CommDTM/

GatewayDTM are required (*2)

*1: The control network driver for Vnet/IP or V net and control network itnerface cards (VF702/VF701) are not required when communicating with HART devices via multiplexers and CommDTM/GatewayDTM.*2: As for the third-party supplied CommDTM/GatewayDTM, please confirm the vendor for what OS is supported.

Software Requirements for Connected SystemCENTUM VP

CENTUM VP: R4.01 or later R4.01 or later to support HART communication R4.02.30 or later to support ISA100 Field Wireless communication R4.03.00 or later to support Fast Device Patrol for HART

Exaopc OPC Interface Package (for HIS): R3.05 or laterExaopc OPC Interface Package (NTPF100): R3.01 or later

CENTUM CS 3000CS 3000: R3.01 or later R3.02 or later to support HART devices R3.07 or later to notify HIS of operatior guide message R3.08 or later for Consolidated Alarm Management Software for HIS (CAMS for HIS) consolidationExaopc OPC Interface Package (for HIS): R3.01 or later R3.02 or later to support HART devicesExaopc OPC Interface Package (NTPF100): R3.01 or later

STARDOMSTARDOM: R1.40 or later R1.60 or later to support HART devicesFCN/FCJ OPC Server for Windows: R1.40 or later R1.60 or later to support HART devices

Apr. 17, 2013-00

36

Gen

eral

Asse

t Man

agem

ent

16


GS 33Y05Q10-32E Apr. 17, 2013-00

ProSafe-RSProSafe-RS: R1.02 or later

R2.20 or later to support HART communicationExaopc OPC Interface Package (for HIS): R3.06 or later R3.07 or later to notify HIS of operatior guide message R3.08 or later for CAMS for HIS consolidationExaopc OPC Interface Package (NTPF100): R3.01 or later

FieldMatePRM: R3.02 or later to support synchronization with FieldMate.FieldMate: R1.03.01 or later to support synchronization with PRM.

YOKOGAWA PRODUCTS AVAILABLE TO RESIDE WITH PRM ON THE SAME PC PRM ClientCENTUM VP HIS CENTUM CS 3000/HIS ProSafe-RS SENG STARDOM HMI Client PC

PRM Server or Field Communications ServerNeither PRM Server nor Field Communications Server can be installed on a PC where the products described above are installed.

MODELS AND SUFFIX CODESPRM Basic Set (for new installation)

Description Model PRMSET Plant resource manager basic set

Suffix Codes -S Basic software license and media fee 1 Always 1 1 English version

Option Codes

/N0025 Maximum number of connected devices: 25 /N0300 Maximum number of connected devices: 300 /N1000 Maximum number of connected devices: 1000/N3000 Maximum number of connected devices: 3000

Note: The basic set includes licenses of a PRM client, a PRM server, and a field communications server; a software media for PRM; a device files media; and an electronic installation manual media.

PRM Server (for new installation)

Description Model SSS7700 Plant Resource Manager (server) [Media model: SSSSM02-C11]

Suffix Codes

-S Basic software license -C Multiple software licenses (for 2 or more) 1 Always 1 1 English version

Option Codes /N0300 Maximum Number of connected devices: 300 /N1000 Maximum Number of connected devices: 1000 /N3000 Maximum Number of connected devices: 3000

Note: Every project requires one PRM server.Note: This package cannot be installed with CENTUM VP/CS 3000 HIS, ProSafe-RS SENG, or STARDOM HMI client PC, and

need a separate PC.Note: Exaopc OPC interface package for HIS (LHS2411) is required to acquire device alarms and events.

37

General

Asset Managem

ent

17


PRM Server (for expansion)

Description Model SSS7700 Plant Resource Manager (server) [Media model: SSSSM02-C11]

Suffix Codes -A Software license for additional devices 1 Always 1 1 English version

Option Codes

/N0003 Expand maximum number of connected devices: 25 to 300 /N0010 Expand maximum number of connected devices: 25 to 1000 /N0310 Expand maximum number of connected devices: 300 to 1000 /N0030 Expand maximum number of connected devices: 25 to 3000/N0330 Expand maximum number of connected devices: 300 to 3000 /T01 Add 1000 units of connected devices /T02 Add 2000 units of connected devices

Note: Option codes of /T01 and /T02 are applicable to the PRM server license for 1000 devices only and the total number of connected devices should not exceed 3000 devices with this option.

Note: This package cannot be installed with CENTUM VP/CS 3000 HIS, ProSafe-RS SENG, or STARDOM HMI client PC, and need a separate PC.

Note: Exaopc OPC Interface Package for HIS (LHS2411) is required to acquire device alarms and events.PRM Client

Description Model SSS7710 Plant Resource Manager (client) [Media model: SSSSM02-C11]

Suffix Codes


Note: This package can be installed with CENTUM VP/CS 3000 HIS, ProSafe-RS SENG, or STARDOM HMI client PC.Field Communications Server

Description Model SSS7720 Field Communications Server [Media model: SSSSM02-C11]

Suffix Codes


Note: The functions to communicate with devices for FOUNDATION fieldbus, HART, PROFIBUS, and ISA100.11a are included in the basic specifications.

Note: This package cannot be installed with CENTUM VP/CS 3000 HIS, ProSafe-RS SENG, or STARDOM HMI client PC, and need a separate PC.

All or a part of the PRM functions (PRM Server, PRM Client, or Field Communications Server) can be installed on a single PC.

Documenting Calibrator Interface for PRM Client

Description Model SSS7711 Documenting Calibrator Interface [Media model: SSSSM02-C11]

Suffix Codes -S Basic software license 1 Always 1 1 English version

Option Code /FLK01 For Fluke 743B/744/754

Note: With the basic license, this software package can be installed in two or more PRM client PC.Software Media for Plant Resource Manager

Description Model SSSSM02 Software media for Plant Resource Manager

Suffix Codes -C Supplied media: DVD-ROM 1 Always 1 1 English version

Note: The electronic instruction manual for this package is included in the media model SSSSD02.

Apr. 17, 2013-00

38

Gen

eral

Asse

t Man

agem

ent

18


GS 33Y05Q10-32E Apr. 17, 2013-00

Device Files Media

Description Model SSSSM03 Device files media

Suffix Codes -C Supplied media: DVD-ROM 1 Always 1 1 English version

Note: This media contains DD and DTM for field devices.Note: When upgrading the PRM software revision, please use the latest version of software Media for PRM and Device Files

Media.Electronic Instruction Manual Media for PRM

Description Model SSSSD02 Electronic instruction manual media for Plant Resource Manager

Suffix Codes -C Supplied media: CD-ROM 1 Always 1 1 English version

Note: The PRM software media (SSSSM02) is required to use this media.Note: No license is required to use the electronic instruction manual media.

PLUG-IN ValveNavi

Description Model SSS7750 PLUG-IN ValveNavi [Media model: SSSAM02-C11]

Suffix Codes

-S Basic software license -C Multiple software license (for 2 or more) 1 Always 1 1 English version

Option Code /FF-H1 For FOUNDATION fieldbus devices (*1)

Note: This package runs on a PC installed with PRM Client (SSS7710).Note: This software supports FOUNDATION fieldbus devices.*1: To connect with FOUNDATION fieldbus devices, specify the option code of /FF-H1.

Software media for PLUG-IN ValveNavi

Description Model SSSAM02 PLUG-IN application media for Plant Resource Manager

Suffix Codes -C Supplied media: CD-ROM 1 Always 1 1 English version

Note: Electronic instruction for PLUG-IN ValveNavi is included in this software media.FCN/FCJ OPC Server for WindowsFor more information, refer to GS 34P02Q61-01E.

39

General

Asset Managem

ent

19


SOFTWARE LICENSE VERSION UPGRADE FROM R2 TO R3This section is dedicated for the PRM R2 users who wish to upgrade to R3 for the benefit of using new functions that are only available from R3. Purchase every upgrading R3 license that match with the existing R2 (basic and multiple licenses). Specify the same number of connected devices as R2.

PRM server for upgrading from R2 to R3

Description Model SSS7700RU Plant Resource Manager (server ) upgrade [Media model: SSSSM02-C11]

Suffix Codes


Option Codes /N0300 Maximum number of connected devices: 300 /N1000 Maximum number of connected devices: 1000 /N3000 Maximum number of connected devices: 3000

Note: The option code of /N0100 in R2.10 or earlier for maximum number of connected devices 100 units has been expanded to 300 units in R3. Specify /N0300 in place of /N0100.

Note: PRM R3.10 requires Microsoft SQL Server 2008 R2 which does not support Windows 2000. There are two ways to cope with PRM R2 operating on Windows 2000. One is to newly install R3.10. The other is to upgrade to R3.04 first, replace OS to the new one, then install R3.10. In the latter case, the device files and other database can be saved.

PRM client for upgrading from R2 to R3

Description Model SSS7710RU Plant Resource Manager (client) upgrade [Media model: SSSSM02-C11]

Suffix Codes


Field communications server for upgrading from R2 to R3

Description Model SSS7720RU Field Communications Server upgrade [Media model: SSSSM02-C11]

Suffix Codes


Note: Communication with HART devices is included as a standard function from R3, and there is no need to specify /HART option code which was necessary for R2.

Documenting calibrator interface for upgrading from R2 to R3

Description Model SSS7711RU Documenting Calibrator Interface upgrade [Media model: SSSSM02-C11]

Suffix Codes -S Basic software license 1 Always 1 1 English version

Option Codes /FLK01 For Fluke 743B/744/754

Apr. 17, 2013-00

40

Gen

eral

Asse

t Man

agem

ent

The 2013/2014 edition of this catalog is made by:Yokogawa Europe Industrial Automation division,Martin Klaassen, Simon Hatch & Emmanuel de Montilet

DTP and realisation, Jaap van der Heijden

Please check for latest editions on cyberdoc.

20


GS 33Y05Q10-32ESubject to change without notice.

Apr. 17, 2013-00

PRM basic set for upgrading from R2 to R3

Description Model PRMSETRU Plant Resource Manager basic set upgrade

Suffix Codes -S Basic software license includes upgrades and media fees 1 Always 1 1 English version

Option Codes

/N0025 Number of connected device: 25 units or less /N0300 Number of connected device: 300 units or less /N1000 Number of connected device: 1000 units or less /N3000 Number of connected device: 3000 units or less

Note: PRM basic set for upgrading can only be purchased when a user has R2 PRMSET. Specify the number of connecting devices as the same as the existing one.

Note: The basic set includes a PRM server, a PRM client, a field communications server, a software media for PRM, and an electronic instruction manual media.

Note: The option code of /N0100 in R2.10 or earlier for maximum number of connected devices 100 units has been expanded to 300 units in R3. Specify /N0300 in place of /N0100.

ORDERING INFORMATIONSpecify model and suffix codes.

TRADEMARKS PRM is a registered trademark of Yokogawa Electric Corporation. CENTUM, Vnet/IP and Prosafe are registered trademark of Yokogawa Electric Corporation. Pentium is a registered trademark of Intel Corporation. Ethernet is a registered trademark of XEROX Corporation. Windows and Windows Vista are registered trademarks of Microsoft Corporation in the United States and/or other

countries. FOUNDATION fieldbus is a registered trademark of Fieldbus Foundation. Adobe and Acrobat are registered trademarks of Adobe Systems Incorporated. HART is a registered trademark of the HART Communication Foundation. STARDOM is a trademark of Yokogawa Electric Corporation. Other product and company names appearing in this document are trademarks or registered trademarks of their

respective holders.

General Indicators

41

General

Indicators

42

Gen

eral

Indi

cato

rs

43

General

Indicators

FVX110 Fieldbus Segment Indicator GS 01S01C01-01EN


FVX110Fieldbus Segment Indicator

Yokogawa Electric Corporation2-9-32, Nakacho, Musashino-shi, Tokyo, 180-8750 JapanTel.: 81-422-52-5690 Fax.: 81-422-52-2018

GS 01S01C01-01EN

GS 01S01C01-01ENCopyright Sep. 20103rd Edition Oct. 2011

The FVX110 is a field indicator that allows you to switch and display up to 16 indicated values for FOUNDATIONTM fieldbus devices. Turn the scroll knob on the case to switch displays. No complex operation is needed in the field and you can observe the indicated values easily. An LCD display with LED backlight and a variety of displays has increased user-friendliness and visibility. The FVX110 offers as standard not only the functions of a field indicator, but also PID function block, Link master, and software download functions.

FEATURES Interoperability

Field instruments that comply with the FOUNDATION fieldbus specifications are fully interoperable; no longer is there a need for custom designed software to communicate with other devices.

Upto16processvariablescanbeswitchedanddisplayed

Up to 16 process variables from multiple field instruments can be displayed, significantly reducing instrumentation costs. Furthermore, support of the FOUNDATION fieldbus digital communications protocol enables the display of signal data from third-party fieldbus compliant field devices.

FulldotmatrixLCDwithbacklightThe backlit full dot-matrix LCD clearly displays text and graphics such as bar graphs, a scroll bar, and icons that indicate the page turning direction and scroll knob turning direction.

LinkmasterfunctionThe FVX110 supports a link master function that enables backup of network management and allows local control using field devices.

FunctionblocksTo facilitate device diagnostics, two functions blocks each are provided for the multiple analog output (MAO), arithmetic (AR), and input selector (IS), and a single function block is provided for the following: signal characterizer (SC), integrator (IT), and PID.

Softwaredownl

field instruments & solutions catalogue

Documents