Fastenal Product Standard: FNL.PH.SR.Z

Page 1 of 1 June 1, 2009 This document was printed on 6/2/2009 and was current at that time. Please check current revision date to avoid using obsolete copies.

Pipe Hanger, Swivel Ring, Zinc The information below lists the required dimensional, chemical and physical characteristics of the products in this purchase order. If

the order received does not meet these requirements, it may result in a supplier corrective action request, which could jeopardize your

status as an approved vendor. Unless otherwise specified, all referenced consensus standards must be adhered to in their entirety.

Nominal Pipe

Size

RS A B Max. Rec.

Load (lbs.)

1/2” 3/8” 2-3/4” 1” 300

3/4” 3/8” 3-1/16” 1” 300

1” 3/8” 3-5/16” 1” 300

1-1/4” 3/8” 3-9/16” 1” 300

1-1/2” 3/8” 3-13/16” 1” 300

2” 3/8” 4-1/4” 1” 300

2-1/2” 1/2” 5-5/8” 1-1/4” 1000

3” 1/2” 6-9/16” 1-1/4” 1000

4” 5/8” 7-3/4” 1-5/16” 1100

5” 5/8” 9-1/8” 1-5/16” 1100

6” 3/4” 10-5/8” 1-9/16” 1250

8” 7/8” 13-1/8” 1-5/8” 1250

Specification Requirements: • Standard: Complies with Federal Specification WW-H-171E & A-A-1192A

(Type 10) and Manufacturers Standardization Society (MSS) SP-69

& SP-58 (type 10)

• Material: Carbon Steel

• Finish: Electro-Plated Zinc in accordance with ASTM B633, SC1 Type III