fibrolux · ballistic composite panels
DESCRIPTION
GRP panels for bullet and blast protection.TRANSCRIPT
V e r s tä r k t e k u n s t s to f f e
BALLISTIC COMPOSITE PANELSbullET-ProoF AND ExPloSioN-rESiSTANT PANEl MATEriAl
V e r s tä r k t e k u n s t s to f f e
Fibrolux enables the use of composite panels, which were originally developed for military purposes, for civilian applica-tions. The panels can be used both as single component armour, as well as in combination with other materials for rein-forced armour. By combining multiple panels, increased safety levels can also are achieved.
Ballistic Composite Panels have the advantage, that they can, as opposed to conventional materials, capture bullets and splinters upon impact and enclose them.
� high protective effect at low material thickness
� low weight - therefore easier to transport and assemble
� easy to process with carpenters tools (hard metal)
� corrosion and chemical resistant, therefore no protective coating needed
� very high mechanical strength, insensitive to mechanical influences
� thermally insulated
� electrically insulated
� electromagnetically transparent
� maintenance-free, significantly longer life than steel
ADVANTAGES
Fibrolux bCP (bAlliSTiC CoMPoSiTE PANElS)bullET-ProoF AND ExPloSioN-rESiSTANT PANEl MATEriAl
+150°C
0°C
-100°C
© F
ibro
lux
2012
01 0
01
� security doors and windows � bullet-proof dry walls � mobile room systems & containers � mobile dividing walls � guard- and gate-houses � shooti ng stands and ranges � bank counters � police and government buildings � security areas � judges stands / speakers lecterns � buildings of justi ce � protecti ve housings for industrial
plants (e.g. compression testi ng devices)
APPLICATIONS
Fibrolux bCP (bAlliSTiC CoMPoSiTE PANElS)bullET-ProoF AND ExPloSioN-rESiSTANT PANEl MATEriAl
TECHNiCAl DATA
plate thickness 13 mm
weight 25,5 kg/m²
applicati on range -30 to +60°C
fi re classDIN 4102 | B2ASTM E-84-98 | < 25, class AUL94 V | V 0
width 1000 mm
length 2000, 2500, 3000 mm oder nach Maß bis 12000 mm
bending strength 320 MPa
tensile strength 300 MPa
compressive strength 420 MPa
E-modul e 30000
impact strength iZoD 180 KJ/m²
water intake < 0,15 %
V e r s tä r k t e k u n s t s to f f e
In planning and assembly it should be noted that joints and cor-ners should have an additional covering. This may be accomplis-hed by a staggered mounting of the panels, or by attaching an additional layer with sufficient overlap at the gap.
Fibrolux bCP can be processed with conventional tools (hard me-tal).
Fibrolux bCP can be varnished, painted or decorated by adding an additional coating of foil etc.
If the wall thickness of the panels is reduced, the penetration resistance at this point is no longer guaranteed; in this case an additional coverage should be mounted.
Fibrolux bCP (bAlliSTiC CoMPoSiTE PANElS)bullET-ProoF AND ExPloSioN-rESiSTANT PANEl MATEriAl
CErTiFiCATES
calibrati on model standard level panel.357 Mag FMJ/CB/SC VPAM APR2006 4 1x13 mm.44 Mag FMJ/FN/SC VPAM APR2006 4 1x13 mm7,62x39 FMJ/PB/FeC en1063 6 3x13 mm5,56x45 (M-193) FMJ/PB/SC en1063 6 3x13 mm7,62x51 (M 80 NATO) FMJ/CB/SC en1063 6 (teil II) 3x13 mm7,62x51 (M 80 NATO) FMJ/CB/SC nIJ 0108.01 III 13/7/13/7 mm.44 Mag FMJ/FN/SC nIJ 0108.01 III a 1x13 mm1.1 FSP STANAG 2920 V50=630,7 m/s 1x10 mm
9 mm .44 Mag.357 Mag 7,62x515,56x45
V e r s tä r k t e k u n s t s to f f e
V e r s tä r k t e k u n s t s to f f e
Fibrolux GmbH • Hessenstr. 18 • D-65719 Hofh eim/Frankfurt • GermanyTel: +49 6122 9100 0 • Fax: +49 6122 1500 [email protected] • www.fibrolux.com