fibre cable fibre patch leads fibre ...minitran.co.uk 124 cut to length fibre cable nylon armoured...
TRANSCRIPT
Head Office: T: 01279 757775 • F: 01279 653535 Scotland: T: 01383 435985 • F: 01383 435993121
FIBRE CABLE
Belden & Draka Cable 122
Miniflex Cable 123
Nylon Armoured Belden cable 124
FIBRE PATCH LEADS
Fibre Patch Leads 125 - 127
Fibre Pre-Termination Service 127
Fibre Pig Tails 128
FIBRE COnnECTORS
TE Lightcrimp+ Connectors & Kit 129
TE Corelink Splice 129
Belden Brilliance Connectors 130
Panduit Opticam Connectors 131
COuPLERS, PAnELS, ACCESSORIES & EnCLOSuRES
Panel mount couplers 132 - 133
Fibre Panels 134
Spools, Splice Holders, Protectors & Glands 135
Fibre Enclosures & Splice Boxes 136
MPT PRE-TERMInATED SySTEM
MTP cassettes 137
MTP Fan Outs & Trunk Cable Assemblies 138
MTP Panels 139
TOOLIng, KITS & COnSuMABLES
Strippers, Shears & Slitters 140
Cleavers & Scribe Tool 140
Fibre Kits 141
Consumables 142 - 145
TESTERS
OTDR & Fibre Loss Kits 146 - 147
Visual Inspection System 148
Fusion Splicer 149
Network Analysers 150
[email protected] www.minitran.co.uk
FIBRE CABLE
For internal/external campus/building backbone (riser) &/or horizontal cabling applications. Can be used for linking 2 buildings externally via a duct (not suitable for direct burial). Cable is LSOH & watertight. Gel filled on loose tube. Predicted lifetime 30 years.
Draka fibre cable uses patented 'BendBright' technology for improved bending performance compared to other fibre cable without any sacrifice or trade-off on bandwidth or other performance.
Black Tight Buffered Orange Loose Tube
Fibre cable Belden P/no Draka P/no Belden P/no Draka P/no
4 core LSOH GUMT504 1026279 GUSN504 1017435
8 core LSOH GUMT508 1026281 GUSN508 1017107
12 core LSOH GUMT512 1026282 GUSN512 1017437
16 core LSOH GUMT516 N/A GUSN516 N/A
24 core LSOH GUMT524 1026283 GUSN524 1017438
4 core LSOH GUMT304 1022503 GUSN304 1018246
8 core LSOH GUMT308 1022504 GUSN308 1017139
12 core LSOH GUMT312 1022505 GUSN312 1017140
16 core LSOH GUMT316 1022506 GUSN316 N/A
24 core LSOH GUMT324 1022507 GUSN324 1017141
4 core LSOH GUMT604 1022508 GUSN604 N/A
8 core LSOH GUMT608 1022509 GUSN608 N/A
12 core LSOH GUMT612 1022510 GUSN612 1022246 (Blue)
16 core LSOH GUMT616 1022511 GUSN616 N/A
24 core LSOH GUMT624 1022512 GUSN624 1022247 (Blue)
4 core LSOH GUMT804 1018910-BLK GUSN804 1016956
8 core LSOH GUMT808 1017166-BLK GUSN808 1016960
12 core LSOH GUMT812 1018919-BLK GUSN812 1016962
16 core LSOH GUMT816 1021653-BLK GUSN816 N/A
24 core LSOH GUMT824 1027785 GUSN824 1016964
Cut to length
OM2 50/125
Multimode
OM3 50/125
Multimode
OM4 50/125
Multimode
OS1/2 9/125
Singlemode
Tight buffered ideal for use with Lightcrimp, Belden Brilliance & epoxy connectors. Loose tube with Lightcrimp & epoxy connectors only (pages 128-131)
Cable type and maximum distance
Application Wavelength Data Rate OM1 OM2 OM3 OM4 OS1 OS2
100BASE-FX 1300nm 100Mbps 2000Mtrs 2000Mtrs 2000Mtrs 2000Mtrs - -
100BASE-LX10 1310nm 100Mbps - - - - 10Km 10Km
1000BASE-SX 850nm 1Gbps 275Mtrs 550Mtrs 800Mtrs 800Mtrs - -
1000BASE-LX 1310nm 1Gbps 550Mtrs 550Mtr 550Mtr 550Mtr 5000Mtrs 5000Mtrs
10GBASE-SR 850nm 10Gbps 33Mtrs 82Mtrs 300Mtrs 450Mtr - -
10GBASE-LX 1310nm 10Gbps - - - - 10Km 10Km
10GBASE-LX4 1310nm 10Gbps 300Mtr 300Mtr 300Mtr 300Mtr 10Km 10Km
40GBASE-SR4 850nm 40Gbps - - 100Mtrs 125Mtrs - -
40GBASE-LR4 1310nm 40Gbps - - - - 10Km 10Km
100GBASE-SR10 850nm 100Gbps - - 100Mtrs 125Mtrs 10Km 10Km
Tight Buffered & Loose Tube Fibre Cable
Head Office: T: 01279 757775 • F: 01279 653535 Scotland: T: 01383 435985 • F: 01383 435993123
FIBRE CABLE
Miniflex cable is designed, developed & manufactured in the UK by M2FX. Its loose tube "hinged" sheath construction is unique & has an extremely small overall diameter of 3mm for 12 cores or less and 5mm for 24 cores. It is armoured up to 1400N/ 350 lbf which is approximately ten times the performance of standard armoured cable. It is also extremely flexible and light weight.
Minilex TuffDuct and Catenary duct are suitable for copper & fibre cables in a direct burial or catenary wire application. Designed for routing cables where there is a need for UV resistance (External use), both have low friction lining to allow cables to be pushed through easily.
Miniflex Lightweight Armoured Fibre Cable
Miniflex TuffDuct & Catenary Duct
Orange PE 6mm Inner Dia Tuffduct OFTD-P-10-6-PE-ORG
Black Aerial 6mm Inner Dia Catenary OFAM-P-8-5.5-PE-BLK
• Half the diameter of other products (24 core only 5mm OD)
• Lightweight armoured jacket (24 core weighs only 13.6Kg/Km)
• Tough, ultra flexible & kink resistant • Up to 10x the crush resistance of other products• Ideal for main equipment rooms, data centres,
ducting & catenary applications.
OM3 & OS2 Multicore Cables
Black-PBT & White PA LSOH are standard. Other colours available to order, minimum 2K runs.
Colour: See below leftMaterial: PB= (Polybutylene terephthalate) PA= (Polyamide LSOH) PE= (Polyethylene)No of Cores & Cable Type: 043= 4 Core OM3 133= 8 Core OM3 493= 12 Core OM3 195= 24 Core OM3 323= 4 Core OS2 073= 8 Core OS2 033= 12 Core OS2 245= 24 Core OS2
TnCA-XXX_XX_XXX
Less Space + Less Risk
+ Faster Installation = COST SAVINGS
Patented grooves increase flexibility & strength
Cut to length
[email protected] www.minitran.co.uk
Cut to length
FIBRE CABLE
Nylon armoured "Loose Tube" fibre cable is an excellent alternative to metallic armoured CST types. The Important difference is that the nylon armoured version does not have a reel memory problem, allowing for easy installation when pulling in longer lengths. This cable is constructed with an orange LSOH outer jacket with increased swellable yarns as strength members with much improved rodent protection. This cable is also good for direct burial as well as duct applications.
Specification: Bend radius 25mm or Static 15 x dia. or Dynamic 20x dia. Crush resistance 15000 N/m. Direct burial lees/equal to 150N/Cm
nylon Armoured Loose Tube Fibre Fibre cable Belden P/no
8 core orange LSOH GURB208
OM2 50/125 12 core orange LSOH GURB212
Multimode 16 core orange LSOH GURB216
24 core orange LSOH GURB224
8 core orange LSOH GURB308
OM3 50/125 12 core orange LSOH GURB312
Multimode 16 core orange LSOH GURB316
24 core orange LSOH GURB324
8 core orange LSOH GURB608
OM4 50/125 12 core orange LSOH GURB612
Multimode 16 core orange LSOH GURB616
24 core orange LSOH GURB624
8 core orange LSOH GURB808
OS1/2 9/125 12 core orange LSOH GURB812
Singlemode 16 core orange LSOH GURB816
24 core orange LSOH GURB824
Cut to length
OM2 50/125
Multimode
OM3 50/125
Multimode
OM4 50/125
Multimode
OS1/2 9/125
Singlemode
Ideal for use with Lightcrimp and epoxy style connectors only. See pages 129 & 132
Cable type and maximum distance
Application Wavelength Data Rate OM1 OM2 OM3 OM4 OS1 OS2
100BASE-FX 1300nm 100Mbps 2000Mtrs 2000Mtrs 2000Mtrs 2000Mtrs - -
100BASE-LX10 1310nm 100Mbps - - - - 10Km 10Km
1000BASE-SX 850nm 1Gbps 275Mtrs 550Mtrs 800Mtrs 800Mtrs - -
1000BASE-LX 1310nm 1Gbps 550Mtrs 550Mtr 550Mtr 550Mtr 5000Mtrs 5000Mtrs
10GBASE-SR 850nm 10Gbps 33Mtrs 82Mtrs 300Mtrs 450Mtr - -
10GBASE-LX 1310nm 10Gbps - - - - 10Km 10Km
10GBASE-LX4 1310nm 10Gbps 300Mtr 300Mtr 300Mtr 300Mtr 10Km 10Km
40GBASE-SR4 850nm 40Gbps - - 100Mtrs 125Mtrs - -
40GBASE-LR4 1310nm 40Gbps - - - - 10Km 10Km
100GBASE-SR10 850nm 100Gbps - - 100Mtrs 125Mtrs 10Km 10Km
Temperature range: Transport: -30 to 70 deg C Installation: -5 to 50 deg C
nylon Armoured Fibre Cable
Head Office: T: 01279 757775 • F: 01279 653535 Scotland: T: 01383 435985 • F: 01383 435993125
FIBRE PATCH LEADS
ST to ST Twin Zip Duplex
ST to LC Twin Zip Duplex
ST to SC Twin Zip Duplex
SC to SC Twin Zip Duplex
0.5Mtr FPC-STD005C-*
1.0Mtr FPC-STD01C-*
2.0Mtr FPC-STD02C-*
3.0Mtr FPC-STD03C-*
5.0Mtr FPC-STD05C-*
10Mtr FPC-STD10C-*
15Mtr FPC-STD15C-*
20Mtr FPC-STD20C-*
25Mtr FPC-STD25C-*
0.5Mtr FPC-STLC005-*
1.0Mtr FPC-STLC01-*
2.0Mtr FPC-STLC02-*
3.0Mtr FPC-STLC03-*
5.0Mtr FPC-STLC05-*
10Mtr FPC-STLC10-*
15Mtr FPC-STLC15-*
20Mtr FPC-STLC20-*
25Mtr FPC-STLC25-*
0.5Mtr FPC-SCST005DC-*
1.0Mtr FPC-SCST01DC-*
2.0Mtr FPC-SCST02DC-*
3.0Mtr FPC-SCST03DC-*
5.0Mtr FPC-SCST05DC-*
10Mtr FPC-SCST10DC-*
15Mtr FPC-SCST15DC-*
20Mtr FPC-SCST20DC-*
25Mtr FPC-SCST25DC-*
0.5Mtr FPC-SC005DC-*
1.0Mtr FPC-SC01DC-*
2.0Mtr FPC-SC02DC-*
3.0Mtr FPC-SC03DC-*
5.0Mtr FPC-SC05DC-*
10Mtr FPC-SC10DC-*
15Mtr FPC-SC15DC-*
20Mtr FPC-SC20DC-*
25Mtr FPC-SC25DC-*
• Tested & supplied with test results. • Multimode & singlemode options. • Variety of LSOH jacket colours. • Twin zip duplex 3mm cables as std.
• Meets/exceeds TIA/EIA-568-B.3. • Flat Ruggerdised, armoured & non std lengths
made to order.• APC (Angled Polish Connectors) made to order.
* For all the above leads replace suffix with: No suffix = OM1 62.5/125 Yellow 50 = OM2 50/125 Orange 53 = OM3 50/125 Aqua or Violet 54 = OM4 50/125 Magenta S = OS1/2 9/125 Duplex Yellow SS = OS1/2 9/125 Simplex Yellow
For Flat Ruggerdised Cable add applicable suffix (left) followed by FFor Armoured Ruggerdised Cable add applicable suffix (left) followed by A
ST SC LC
TM
[email protected] www.minitran.co.uk
FIBRE PATCH LEADS
SC to LC Twin Zip Duplex
ST to FC Twin Zip Duplex(OS1/2 9/125 Singlemode Only)
SC to FC Twin Zip Duplex(OS1/2 9/125 Singlemode Only)
LC to LC Twin Zip Duplex
0.5Mtr FPC-SCLC005-*
1.0Mtr FPC-SCLC01-*
2.0Mtr FPC-SCLC02-*
3.0Mtr FPC-SCLC03-*
5.0Mtr FPC-SCLC05-*
10Mtr FPC-SCLC10-*
15Mtr FPC-SCLC15-*
20Mtr FPC-SCLC20-*
25Mtr FPC-SCLC25-*
0.5Mtr FPC-STFC005S-*
1.0Mtr FPC-STFC01S-*
2.0Mtr FPC-STFC02S-*
3.0Mtr FPC-STFC03S-*
5.0Mtr FPC-STFC05S-*
10Mtr FPC-STFC10S-*
15Mtr FPC-STFC15S-*
20Mtr FPC-STFC20S-*
25Mtr FPC-STFC25S-*
0.5Mtr FPC-LC005-*
1.0Mtr FPC-LC01-*
2.0Mtr FPC-LC02-*
3.0Mtr FPC-LC03-*
5.0Mtr FPC-LC05-*
10Mtr FPC-LC10-*
15Mtr FPC-LC15-*
20Mtr FPC-LC20-*
25Mtr FPC-LC25-*
0.5Mtr FPC-SCFC005S-*
1.0Mtr FPC-SCFC01S-*
2.0Mtr FPC-SCFC02S-*
3.0Mtr FPC-SCFC03S-*
5.0Mtr FPC-SCFC05S-*
10Mtr FPC-SCFC10S-*
15Mtr FPC-SCFC15S-*
20Mtr FPC-SCFC20S-*
25Mtr FPC-SCFC25S-*
* For all the above leads replace suffix with: No suffix = OM1 62.5/125 Yellow 50 = OM2 50/125 Orange 53 = OM3 50/125 Aqua or Violet 54 = OM4 50/125 Magenta S = OS1/2 9/125 Duplex Yellow SS = OS1/2 9/125 Simplex Yellow
* For ST to FC & SC replace suffix with: F = Flat Ruggerdised CableA= Armoured Ruggerdised Cable
For Flat Ruggerdised Cable add applicable suffix (left) followed by FFor Armoured Ruggerdised Cable add applicable suffix (left) followed by A
TM
STSC FCLC
Head Office: T: 01279 757775 • F: 01279 653535 Scotland: T: 01383 435985 • F: 01383 435993127
Minitran offer a fibre pre-termination service for both TB (Tight Buffered) and LT (Loose Tube) fibre cables. Simply decide on the cable & connector type together with optional pulling boot (advisable). Normal turn around time approx 3 days. Pre-tested supplied ready to install.
Part Number Matrix
Mini5 Fibre Pre-Termination Service
FIBRE PATCH LEADS & PRE-TERMInATED FIBRE CABLE
LC to FC Twin Zip Duplex(OS1/2 9/125 Singlemode Only)
FC to FC Twin Zip Duplex(OS1/2 9/125 Singlemode Only)
0.5Mtr Yellow FPC-FCLC005S-*
1.0Mtr Yellow FPC-FCLC01S-*
2.0Mtr Yellow FPC-FCLC02S-*
3.0Mtr Yellow FPC-FCLC03S-*
5.0Mtr Yellow FPC-FCLC05S-*
10Mtr Yellow FPC-FCLC10S-*
15Mtr Yellow FPC-FCLC15S-*
20Mtr Yellow FPC-FCLC20S-*
25Mtr Yellow FPC-FCLC25S-*
0.5Mtr Yellow FPC-FC005S-*
1.0Mtr Yellow FPC-FC01S-*
2.0Mtr Yellow FPC-FC02S-*
3.0Mtr Yellow FPC-FC03S-*
5.0Mtr Yellow FPC-FC05S-*
10Mtr Yellow FPC-FC10S-*
15Mtr Yellow FPC-FC15S-*
20Mtr Yellow FPC-FC20S-*
25Mtr Yellow FPC-FC25S-*
* Replace suffix with: F = Flat Ruggerdised CableA= Armoured Ruggerdised Cable
FPC-LC04100-50-L
TM
TM
LC FC
A= Nylon Armoured, L= Loose Tube, Blank = tight buffered 9 = OS1/2 9/125 Singlemode 50 = OM2 50/125 Multimode 53 = OM3 50/125 Multimode 54 = OM4 50/125 Multimode Length In Mtrs No of Fibre cores Connector Type: ST, SC, LC or FC
[email protected] www.minitran.co.uk
MInI5 FIBRE PIgTAILS
Mini5 pigtails are available from stock for the four popular connector types, ST, SC, LC and FC. Other types E2000, MTRJ, Panduit Optijack and APC style connectors can be made to order. The Mini5 product is manufactured with colour coded 900um cable to signify the cable type. Fully tested & supplied with test results. 1Mtr long pigtails as standard.
ST, SC, LC & FC Pigtails 900um 1Mtr
Fibre testers: pages 146-150
TM
LC SCST FC
OM3 ( 50/125) Aqua Easy Strip 900um Fibre cable
ST Connector FPC-STP01-53
SC Connector FPC-SCP01-53
LC Connector FPC-LCP01-53
OM4 ( 50/125) Magenta Easy Strip 900um Fibre cable
ST Connector FPC-STP01-54
SC Connector FPC-SCP01-54
LC Connector FPC-LCP01-54
OS1/2 ( 9/125) yellow Easy Strip 900um Fibre cable
ST Connector FPC-STP01S
SC Connector FPC-SCP01S
LC Connector FPC-LCP01S
FC Connector FPC-FCP01S
OM1 ( 62.5/125) White Easy Strip 900um Fibre cable
ST Connector FPC-STP01
SC Connector FPC-SCP01
LC Connector FPC-LCP01
OM2 ( 50/125) Orange Easy Strip 900um Fibre cable
ST Connector FPC-STP01-50
SC Connector FPC-SCP01-50
LC Connector FPC-LCP01-50
Head Office: T: 01279 757775 • F: 01279 653535 Scotland: T: 01383 435985 • F: 01383 435993129
LIgHTCRIMP PLuS & CORELInK SySTEMS
Lightctimp connectors are factory polished, all you have to do is strip the cable, prepare and cleave the fibre and then crimp the connector.
Kits include handtools, high precision cleave tool, termination instructions & instructional CD-Rom.
These high performance mechanical splices are quick and easy to use and are re-usable.Each pack contains 12 splices and locking keys.
Lightcrimp+ SC & LC Kit 1754845-1
Lightcrimp + ST/SC/LC Kit 1754739-1
S/mode & M/mode Corelink Splice 503577-1
Corelink Workstation 503605-1
OM1 62.5/125 Cable *250um/900um & 3mm Cable Types
ST Simplex OM1* 5492642-1
SC Simplex OM1* 5492643-1
LC Simplex OM1* 6754483-1
OM2 50/125 Cable
ST OM2 Simplex 6278082-1
SC OM2 Simplex 6278079-2
LC OM2 Simplex * 6754483-2
OM3 50/125 Cable
ST Simplex 6278082-2
SC Simplex 6588291-2
LC Simplex * 6754483-4
OS1 9/125 cable type
ST Simplex 1828953-3
SC Simplex 6693276-1
LC Simplex 6754482-1
Lightcrimp Plus Termination Kit
Corelink Mechanical Splices
Lightcrimp Plus Connectors
Splice holders (with adhesive backing)
6 Splice Holder 559066-1
12 Splice Holder 559087-1
Requires a precision cleaver (page 140).
*The LC is only suitable for 250um and 900um fibre types. The ST and SC connectors can be used on 250um/900um and 3mm jacketed fibre.
[email protected] www.minitran.co.uk
BELDEn BRILLIAnCE FIBRE COnnECTORS
A quick and simple method of fibre termination. Simply strip and cleave the fibre and insert it into the connector. A small toggle slide on the connector is then locked into position and your termination is complete. Release the toggle switch re-terminate the connector. Designed for use on 900um tight buffered fibre.
Once the tight-buffered fibre is prepared with a cleave tool, follow these 3 easy steps:Fool-proof termination in three simple steps... now that's Brilliance!
Features:• Super fast termination times• Reusable upto 5 Times• Low insertion loss typical 0.2dB • No proprietary tools required• 100% installation yield Guarantee
LC Connector ST Connector SC Connector
OM1 62.5/125 Simplex Beige AX104240-S1 - AX104244-S1
OM2 50/125 Simplex Black AX104241-S1 AX104249-S1 AX104245-S1
OM3/4 50/125 Simplex Aqua AX104242-S1 AX104250-S1 AX104246-S1
OS2 9/125 Simplex Blue AX104243-S1 AX104251-S1 AX104247-S1
Basic Installation Kit (with installation guide, demo video, cleave marker & support handle) AX104268
Field Installation Kit (with installation guide, demo video, support handle & adaptors, stripper, tweezers, marker, wipes, scissors, waste bottle, glasses, visual fault locator, cleave inspection microscope, field cleaver) AX104270
Precision Installation Kit (includes all contents of the field kit but with a precision cleaver instead of the cleave inspection microscope & field cleaver) AX104271
Brilliance Connectors
Belden Brilliance Tool Kits
321 Insert fibre Activate tab Install boot
Basic tooling required to terminate Belden Brilliance1. Fibre stripping tool See Page 1402. Cleaning spray/cloth See Page 1443. Cleave tool See Page 1404. VFL laser fault finder See Page 143
Head Office: T: 01279 757775 • F: 01279 653535 Scotland: T: 01383 435985 • F: 01383 435993131
OptiCam Pre-Polished Fibre Connectors & Kits
SC simplex 62.5/125 OM1 FSCMC6BLY
SC duplex 62.5/125 OM1 FSCDMC6BLY
SC simplex 50/125 OM2 FSCMC5BLY
SC duplex 50/125 OM2 FSCDMC5BLY
SC simplex 50/125 OM3 FSCMCXAQY
SC duplex 50/125 OM3 FSCDMCXAQY
SC simplex 9/125 OS1 FSCSCBUY
ST 62.5/125 OM1 FSTMC5BL
ST 50/125 OM2 FSTMC6EI
LC simplex 62.5/125 OM1 FLCSMC6BLY
LC duplex 62.5/125 OM1 FLCDMC6BLY
LC simplex 50/125 OM2 FLCSMC5BLY
LC duplex 50/125 OM2 FLCDMC5BLY
LC simplex 50/125 OM3 FLCSMCXAQY
LC duplex 50/125 OM3 FLCDMCXAQY
LC simplex 9/125 OS1 FLCSSCBUY
LC duplex 9/125 OS1 FLCDSCBUY
Fast termination eliminates field polishing & adhesive. For tight buffered cable only. • Terminate in less than half the time of field polish
connectors. • Re-termination capability • Easy to use tooling allows inspection of terminated
fibre for optimum results.
PAnDuIT FIBRE COnnECTORS
Field Polish Fibre Connectors
LC simplex multimode FLCSMEIY
LC simplex singlemode FLCSSBUY
Clip for connecting two LC simplex connectors FLCCLIP-L
LC duplex multimode FLCDMEIY
LC duplex singlemode FLCDSBUY
ST multimode FSTMABL
ST singlemode FSTSABU
SC simplex multimode FSCMBL
SC simplex singlemode FSC5BU
Clip for connecting two SC simplex connectors FSCCLIP-L
Field installable with anaerobic adhesive & polishing • ST & SC connectors for 900um tight buffered or
3mm jacketed cable.• LC simplex connectors for 900um tight buffered &
1.6 - 2mm jacketed cable• LC duplex connectors for 1.6 - 2mm jacketed cable
Fibre Stripper MT-CFS-2 page 140 Precision Cleaver MT-10010 page 140 Cleaning fluid MT-POC03M page 144Lint free wipes LINFW page 144
Fibre Consumables pages 140-145
Termination kit has everything needed to terminate Opticam connectors: Includes cable strippers, alcohol, screwdriver, safety glasses, tweezers, kevlar sheers, workmat, cleaver tool, termination tool, wipes, swabs & marker pen. All in a carry case. FCAMKIT
If you already have a fibre cable stripper, precision cleaver, cleaning fluid & lint free wipes then you only need to buy this upgrade kit part number which includes the termination tool. FPPKIT-CVY
Ethernet switches and converters with fibre ports: pages 184-185 & 188-189
[email protected] www.minitran.co.uk
EPOXy COnnECTORS & PAnEL MOunT COuPLERS
Mini5 Fibre panel mount couplers are available in multimode & singlemode variants for for OM1, OM2, OM3, OM4 and OS1/2. The SC & LC couplers have no need of fixing screws when used with the Mini5 double skin 19" panels (page 134).
Metallic barrel with serrated washer and locking nut. Phos/bronze ferrule for OM1/2, Ceramic for OM3, OS1/2.
Plastic body with metallic mounting clips. Phos/bronze ferrule for OM1/2, Ceramic for OM3/4, OS1/2.
Plastic body with metallic mounting clips. Phos/bronze ferrule for OM1/2, Ceramic for OM3/4, OS1/2.
Cable routing & cable protection products: pages 160-181
KVM: pages 193-199
Multimode OM1/2 FCST-APB
Single/Multimode OM3, OS1/2 FCST-APBS
Multimode OM1/2 Beige FCSC-SPBM
Single/Multimode OM3, OS1/2 Blue FCSC-SCSS
Multimode OM4 Aqua FCSC-SCS4
Singlemode OS1/2 APC Green FCSC-SAPC
Multimode OM1/2 Beige FCSC-DPBM
Single/Multimode OM3, OS1/2 Blue FCSC-DCSS
Multimode OM4 Aqua FCSC-DCS4
ST Couplers
SC Simplex Couplers
SC Duplex Couplers
TM
TM
TM
Dual fitting epoxy connectors suitable for both 900Micron and 2.8/3mm jacketed fibre cable. Glue & polish kits together with crimp tooling can be found on page ***, Black boots suitable for both cable types provided as standard.
Epoxy & Polish ConnectorsTM
ST Multimode + Boots MTFC-UMST
ST Singlemode + Boots MTFC-USST
SC Multimode + Boots MTFC-UMSC
SC Singlemode + Boots MTFC-USSC
LC Multimode + Boots MTFC-UMLC
LC Singlemode + Boots MTFC-USLC
Head Office: T: 01279 757775 • F: 01279 653535 Scotland: T: 01383 435985 • F: 01383 435993133
Enclosures & accessories: pages 207-224
EPOXy COnnECTORS & PAnEL MOunT COuPLERS
Plastic body with metallic mounting clips. Pho/bronze ferrule for OM1/2, Ceramic for OM3/4, OS1/2.
Plastic body with metallic mounting clips. Pho/bronze ferrule for OM1/2, Ceramic for OM3/4, OS1/2.
LC Duplex keystone coupler OM1/2/3/4 & OS1/2 Fibre types, Black moulding for both multimode/singlemode types.
Multimode OM1/2 Beige FCLC-DPBM
Single/Multimode OM3, OS1/2 Blue FCLC-DCSS
Multimode OM4 Aqua FCLC-DCS4
Singlemode OS1/2 APC Green FCLC-DAPC
Multimode OM1/2 Beige FCLC-QPBM
Single/Multimode OM3, OS1/2 Blue FCLC-QCSS
Multimode OM4 Aqua FCLC-QCS4
Phos/Bronze OM1/2 FCLC-DPRJ
Ceramic OS1/2 OM3/4 FCLC-DCRJ
ST size blank FCST-BLNK
SC simplex size blank FCSC-SBLNK
SC duplex size blank FCSC-DBLNK
LC Duplex Couplers
LC Quad Couplers
LC Duplex Keystone Couplers
Blanks for Fibre Panels
TM
TM
TM
TM
[email protected] www.minitran.co.uk
FIBRE PAnELS
• Unique design allows LC & SC connectors to snap in flush to the front panel without screws.
• 1U panels with high density versions• Basic cable management kit comprising of gland &
self adhesive fibre support.• 206mm deep sliding tray • Numbered ports & write on port identification • 2 x 25mm & 2 x 20mm cable entry holes at rear • 20mm cable gland with up to 11mm cable entry
unloaded Sliding 1u Fibre Panels
Accepts up to 12 x SC duplex or 12 x LC quad couplers MAT107SP18
Accepts up to 24 x SC simplex or 24 x LC duplex couplers MAT107SP22
Accepts up to 24 x SC duplex or 24 x LC quad couplers MAT107SP24
Accepts up to 16 ST couplers MAT107SP16
Accepts up to 24 ST couplers MAT107SP23
Fibre Panels
Couplers and blanks: page 132-133
Panel accessories: page 135Fibre couplers: pages 132-133
Loaded Sliding 1u Fibre Panels
ST OM1/2 Multimode 4 port MAT107SP16C04
8 port MAT107SP16C08
16 port MAT107SP16C
24 port MAT107SP23C
SC OM1/2 Multimode 4 port (2 x duplex) MAT107SP18C04
8 port (4 x duplex) MAT107SP18C08
24 port (12 x duplex) MAT107SP18C
48 port (24 x duplex) MAT107SP24C
SC OM3/4 Multimode & OS1/2 Singlemode 4 port (2 x duplex) MAT107SP18CS04
8 port (4 x duplex) MAT107SP18CS08
24 port (12 x duplex) MAT107SP18CS
48 port (24 x duplex) MAT107SP24CS
LC OM1/2 Multimode 24 port (12 x duplex) MAT107SP22CS24
48 port (24 x duplex) MAT107SP22C
48 port (12 x quad) MAT107SP18QC
96 port (24 x quad) MAT107SP24QC
LC OM3/4 Multimode & OS1/2 Singlemode 4 port (2 x duplex) MAT107SP22CS04
8 port (4 x duplex) MAT107SP22CS08
12 port (6 x duplex) MAT107SP22CS12
16 port (8 x duplex) MAT107SP22CS16
24 port (12 x duplex) MAT107SP22CS24
48 port (12 x quad) MAT107SP18QCS
96 port (24 x quad) MAT107SP24QCS
ST OM1/2
Multimode
SC OM1/2
Multimode
SC OM3/4 Multimode
& OS1/2 Singlemode
LC OM3/4 Multimode
& OS1/2 Singlemode
LC OM1/2
Multimode
TM
Head Office: T: 01279 757775 • F: 01279 653535 Scotland: T: 01383 435985 • F: 01383 435993135
FIBRE PAnEL ACCESSORIES
Pair of plastic spools with two adhesive bases. Designed to fit most fibre panels 900micron fibre loops around the spool for a neat presentation.
Self Adhesive plastic splice holders suitable for 45/ 61mm protectors.24 way version with clear perspex lid.
6 way
45 or 61mm clear splice protectors used for fusion splicing of multimode and Singlemode 900 Micron cables.
The Mini5 Panels come complete with one 20mm gland. Additional glands will be required when using more than one fibre cable into the panel.
Fibre Management Spool
Fibre Plastic Splice Holders
Fibre Splice Protectors
Fibre Panel Cable glands
TM
TM
TM
TM
MAT107-SPOOL
Grey 6 Position Holder FSPH-6
Black 12 Position Holder FSPH-12
Blue 24 Position Holder FSPH-24
45mm clear FSP45CR
61mm clear FSP61CR
20mm Black MT-GD20BK
25mm Black MT-GD25BK
Fibre testing: pages 146-150
24 way
[email protected] www.minitran.co.uk
FIBRE WALL EnCLOSuRES & EXTERnAL SPLICIng BOXES
Mini5 unloaded, lockable fibre wall enclosures to accept ST, SC or LC Multimode or Singlemode couplers. Grey pressed steel design with the option for one or two opening doors.
Plastic internal/external IP55 rated splice box for either multimode or singlemode cables. With splicing tray and two 20mm glands fitted to the bottom for entry/exitMaximum 12 fibres per splice tray. 378x180x74mm (HxWxD)
Designed for inline or spur jointing applications for 2 or 3 fibre multicore cables. IP rated for underground or aerial use. Black moulded design for minus 40 to plus 65˚C applications.Can be placed on aerial, underground, wall mounting and duct mounting applications. Injection moulded outer body makes it impenetrable by the elements.
Fibre Wall Enclosures
External Surface Mount Splice Box
Fibre underground Splice Enclosure
TM
TM
TM
Double Door: 358x121x360mm (WxDxH) 96port ST or FC MT-FWED96ST
48port SC Duplex MT-FWED48SC
72port LC Duplex MT-FWED72LC
MT-FOWS
Screws (pair) for mounting LC & SC couplers only MT-FWESCREW
24 splices MT-INLINE01
48 splices MT-INLINE02
Single Door: 225x50x270mm (WxDxH)
24port ST or FC MT-FWES24ST
12port SC Duplex MT-FWES12SC
18port SC Duplex MT-FWES18SC
Fibre couplers & accessories are not included: see pages 132-133
Custom pre-terminated fibre leads: page 127Fibre consumables: pages 140-145
Head Office: T: 01279 757775 • F: 01279 653535 Scotland: T: 01383 435985 • F: 01383 435993137
MInI5 PRE-TERMInATED MTP FIBRE
Mini5 MTP® Cassette Modules provide rapid and secure transition between MTP and LC or SC discreet connectors. They are used to interconnect MTP backbones with LC or SC patching or connection to active equipment.Modular system allows for rapid deployment of high density data centre infrastructure as well as improved troubleshooting and reconfiguration during moves, adds and changes. Cassettes can be mounted in 1U or 3U 19” multislot chassis.MTP® Cassettes contain factory controlled and tested MTP-LC fanouts to deliver optical performance and reliability. Low loss MTP Elite and LC or SC premium versions are offered featuring low insertion loss for demanding power budget high speed networks.
Features:• MTP® (US Conec) brand MPO standard compliant
multifibre connector• LC (SFF Data Centre standard), SC discreet interface• Polarity A (standard), B or C• Factory terminated and tested• High performance zirconia sleeve adaptors
MTP® Cassette Modules
Product Code Configurator:
Part Number example: MTPE24LC50CASSB1
TM
See our Data Centre product section: pages 97-111
Quicknet pre-terminated copper system: page 47
Connector End A Fibre Count Discrete Fibre Type CASS Polarity Connector
MTP MTP 12 LC LC OS1/OS2 09 A N/A Standard
MTP Elite MTPE 24 SC SC OM1 62 B1 B1
OM2 50 B2 B2
OM3 OM3 C C
OM4 OM4
[email protected] www.minitran.co.uk
MInI5 PRE-TERMInATED MTP FIBRE
Mini5 MTP® ruggedised fan-out assemblies route multifibre MTP® connection into discreet connectors. They are used to directly interconnect MTP® cassettes, panels or backbone MTP® assemblies with the active equipment, saving costly data centre rack space and easing fibre management. MTP® fan-out assemblies are offered in fibre types in standard 12, 24 or 48 core versions using a compact and rugged micro cable structure. The compact cables optimise cableway use and improve airflow. Mini5 MTP® fan-out is built with highest quality components. Standard MTP® as well low loss Elite versions are offered featuring low insertion loss for demanding high speed networks where power budgets are critical.
Mini5 MTP® trunk multicore cable assemblies facilitate rapid deployment of high density backbone cabling in data centres and other high fibre environments reducing network installation or reconfiguration time and cost. They are used to interconnect cassettes, panels or ruggedised MTP® fan-outs. Compact cables optimise cableway use and improve airflow. Standard & Elite versions featuring low insertion loss for demanding high speed networks.
MTP® Fan-out Cable Assemblies
MTP® Trunk Cable Assemblies
• LSZH, OFNP cable jacket • Female or Male MTP® connectors • Factory terminated and tested
Product Code Configurator:
Product Code Configurator:
Part Number example: MTPF12SC5030ORLS
Part Number example: MTPFMTPF091250AAQLS
TM
TM
Connector GenderA Fibre Connector FibreType Cable Colour JacketType EndA Count EndB Length (M)
MTP MTP Female F 12 LC LC OS1/OS2 09 XX Aqua AQ LSZH LSStandard
MTP MTPE Male M 24 SC SC OM1 62 Purple PU OFNP PL Elite
48 OM2 50 Orange OR
OM3 OM3
OM4 OM4
Connector GenderA Connector GenderB FibreType Fibre Cable Polarity Colour Jacket EndA EndB Count Length Type (M)
MTP MTP Fem F MTP MTP Fem F OS1/OS2 09 12 XX A Aqua AQ LSZH LSStandard Standard MTP MTPE Male M MTP MTPE Male M OM1 62 24 B Purple PU OFNP PL Elite Elite OM2 50 48 C OrangeOR
OM3 OM3
OM4 OM4
Head Office: T: 01279 757775 • F: 01279 653535 Scotland: T: 01383 435985 • F: 01383 435993139
MInI5 PRE-TERMInATED MTP FIBRE
Mini5 MTP® Slim line Panel provide secure transition between MTP® and LC or SC discreet connector interfaces. They are used to interface MTP® backbones with LC or SC patching and active equipment connection.The pre-populated panel allows rapid deployment of high density data centre infrastructure as well as improved trouble shooting and reconfiguration during moves, ads and changes. The shallow depth of the Slimline Panel makes it suitable for copper racking systems. Scaling up to 96 fibres panel is available for server rack in data centre environment. MTP® Slimline Panels contain factory controlled and tested MTP®-LC fan-outs to deliver optical performance and reliability. Low loss MTP® Elite and LC Premium versions are offered featuring improved low insertion losses for demanding low power budget high speed networks.
MTP® Slimline Panel
Product Code Configurator:
Part Number example: MTPPLCMTPEOM460
See our new 'Security' products section: pages 243-250
TM
MTTP FrontConnector RearMTPConnector FibreType FibreCount
LC LC MTPMalestandard MTP OS1/OS2 9 12 60
SC SC MTPMaleElite¨ MTPE OM1 62 24 72
OM2 50 36 84
OM3 OM3 48 96
OM4 OM4
MTTP
[email protected] www.minitran.co.uk
FIBRE TOOLIng
Miller Strippers are the industry standard fibre stripping tools.
Miller 2 Hole stripper MT-CFS-2
Miller 1 Hole stripper MT-1224
Shears & Cutters for the precise removal of kevlar from optical cables.
Miller Kevlar Shears MT-F1KS1
Miller Kevlar Cutters MT-F19809
Miller Round Jacket Slitter makes the removal of the outer jacket quick and simple. Use on Cable OD 4.5-28mm. Adjustable depth to 3mm.
Miller Jacket slitter MT-MK02
Mini5 Professional Cleave Tool MT-PFC20
Mini5 Field Cleaver is designed for use with pre term connectors and spices. MT-10010
TE High Precision Cleaver is designed for use with Lightcrimp plus, Corelinks and splicers. 1871696-1
Mini5 Professional Cleave Tool
TE High Precision Cleaver
Economy Scribe Tool MT-F090C
Flat Ruby blade MT-45357
Carbide Pen Style PAL19221
TM
TM
Strippers, Shears & Slitter
Cleavers
Scribe Tool
For use with epoxy termination connectors: Pages 131 & 132
The Mini5 Professional Precision Cleaver provides clean and accurate cleaves for mechanical connectors, splices and fusion splicing. Designed to precisely cleave all 125um multimode or singlemode optical fibers. The highly precise adjustable diamond blade can perform up to 60,000 cleaves with a typical cleave angle of 90±0.5°.
Mini5 Field Cleaver
Head Office: T: 01279 757775 • F: 01279 653535 Scotland: T: 01383 435985 • F: 01383 435993141
FIBRE TOOL KITS
MT-0053 is a basic fibre tool kit, additional kits add further items.Supplied in a durable moulded HPX high performance water proof case, with pressure relief valve.
Basic Fibre Tool Kit
TM
Starter Tool Kit MT-0053
Fusion Splice Kit MT-0053FS
Anaerobic Tool Kit MT-0053AH
Minitran can also offer bespoke kits to suit your individual fibre needs. Call the Minitran sales office with your fibre tooling requirements.
• Tri hole fibre stripper• Kevlar scissors• Buffer stripper• Round cable stripper• Side cutting pliers• Needle nose pliers• 4 Bit screw driver• Black work mat
• Utility knife• PVC Tape • Safety glasses• Fibre disposal unit• Foam swabs • Cleaning tissues• Degreaser wipes• Ruler
• Fabric tape measure• 1/2" Nut runner• Fusion Splice Sleeves • Black marker pen • Tie labels • Heat Shrink tube kit• 1Mtr 3mm furnication
tube
• Mtr 900µm Furnication Tube
• Piano Wire • Fibre Optic wipes• Tweezers
Starter tool kit contents:
The Anaerobic kit features all the items in the MT-0053 kit with the following additional items added to allow Anaerobic termination on LC, ST and SC connectors.
• Anaerobic Hardener • Anaerobic Primer • Syringes • Carbide Scribe• Universal Crimp Tool • 1.25mm Polishing Puck
• 2.5mm Polishing Puck • Soft polish Pad • 1µm Polishing film x 5• 5µm Polishing film x 5• 0.3µm Polishing film x 5• 1.5µm Diamond film x 5
• 0.5µm Diamond film x 5• Glass Polishing Plate • 200x Microscope • 1.25mm Scope adaptor
Anaerobic tool kit contents:
Fusion Splice kit contents:The fusion splice kit features all the items in the MT-0053 kit with the following additional items added. • Cable Cutters• 50 pack 60mm Splice protection sleeves• Flashlight• Spatula.
Copper tool & test kits: page 252
[email protected] www.minitran.co.uk
FIBRE SyRIngES & POLISHIng
Two part Anaerobic quick cure adhesive is fully cured in minutes with no additional heat required.
For the optimum polishing of fibre connectors polishing plates and pads are essential items.
Professional precision stainless steel polishing pucks.
Mini5 polishing paper In packs of 25 and each sheet is 330mmx230mm.
Lightweight Tungsten coated Aluminium polishing pucks.
3 polish grades in 1 paper (0.3um/1um/5um)
Diamond Film: 150x100mm per sheet.
Syringes include a 0.9mm application needle.
Hardener MT-680
Primer MT-7649
Glass Polish Plate 330x230mm MT-9111
Glass Polish Plate 150x230mm MT-9111A
Soft polishing pad MT-053
Large Black work mat MT-024
2.5mm Stainless Steel MT-6925
1.25mm Stainless Steel MT-6928
grade Colour
0.3um White MT-109-03
1um Light Green MT-109-1
2um Aqua MT-109-2
5um Black MT-109-5
9um Light Blue MT-109-9
12um Dark Yellow MT-109-12
15um Dark Grey MT-109-15
2.5mm Tungsten/Alum PAL19201
1.25mm Tungsten/Alum PAL19261
25Pk 330x230mm MT-109-5-1-03
Diamond film 1um MT-0107-1S
Diamond film 3um MT-0107-3S
Diamond film 30um MT-0107-30S
Syringes 5 Pack MT-3IR5
Syringes 25 Pack MT-3IR25
TM
TM
TM
TM
Anaerobic Adhesive & Syringes
Polishing Plates & Mats
Polishing Pucks
Polishing Film
Head Office: T: 01279 757775 • F: 01279 653535 Scotland: T: 01383 435985 • F: 01383 435993143
FIBRE COnSuMABLES & TESTIng
Handy and safe solution for the disposal of fibre shards.
Optical couplant gels can be used to reduce optical losses on mechanical splices and connectors.
These high power 650nm fault finders can be used to detect sharp bends and breaks in patch cords, patch panels and splices. Also useful when terminating mechanical fibre connectors. 2 x AA batteries & holster
These high power 650nm fault finders can be used to detect sharp bends and breaks in patch cords, patch panels and splices. Also useful to use when terminating mechanical fibre connectors. 2 x AA batteries & holster. 2.5mm for ST, SC, FC etc & 1.25mm for LC connectors.
This compact 200x scope is designed for multimode use and comes complete with 2.5mm and 1.25mm universal adaptors. Supplied with a case and batteries.
This 400x scope is designed for singlemode multimode use and comes complete with 2.5mm universal adaptor. Supplied with a case and batteries.
Large disposal bin MT-8828
Small disposal bin MT-8826
Optical gel pot 0.4oz MT-0001
Optical gel syringe 0.2oz MT-0001S
Laser fault finder 2.5mm (for ST, SC & FC) MT-F1900
Laser Fault Finder 1.25mm (for LC) MT-F1900-125
Continuity Tester 2.5mm MT-5000U
Continuity Tester 1.25mm MT-5000LC
200X Microscope MT-MS200X
400X Microscope MT-FIM400
1.25mm Adaptor MT-FIM1.25
TM
TM
TM
TM
TM
Disposal Pots
Index Matching gels
Laser Fault Finder
Fibre Continuity Tester
Inspection Microscopes
[email protected] www.minitran.co.uk
FIBRE & COnnECTOR CLEAnIng PRODuCTS
Microcare Sticklers can be used for cleaning bulkhead couplers and test equipment ports. 50 sticks per pack.
High purity lint free wipes for optical applications. Mini tub of 90 sheets.
Kim wipes are the standard for dry and wet optical cleaning. 280 wipes per box 100mm x 100mm.
This handy size cleaner can be used for the dry cleaning of connector end faces. approx 400 cleans.
Individual mild solvent impregnated tissues for quick and easy connector or hand tool cleaning. 50 tissues per box.
Handy pen size fibre cleaning solvent pen. Can be used with all cleaning wipes.
Mini5 Fibre Optic non woven wipes can be used alone or with cleaning solvents. Provides superior cleaning without scratching or lint residue.100mm x100mm.
Stickler connector and bulkhead cleaning fluid is a high purity optical cleaning agent.
2.5mm Cleaning Stick MT-MCC-S25
1.25mm Cleaning Stick MT-MCC-S12
Fibre Wipes MT-WFW
Lint Wipes LINFW
Connector Cleaner MT-F17020
Refill Reel 6.5Mtrs MT-F17021
Chemtronics Optic Prep MT-1003
Mini5 Optic Prep MT-OP50
Fibre Cleaning Pen MT-F16709
Mini5 Non woven Wipes (pack of 100) MT-F16702
Stickler Cleaning Fluid MT-POC03M
Sticklers
Wipes & Cleaning Fluid
Kim Wipes
Connector Cleaning
Optic Prep
Fibre Cleaning Solvent Pen
Cleaning Wipes
TM
TM
TM
TM
TM
TM
Head Office: T: 01279 757775 • F: 01279 653535 Scotland: T: 01383 435985 • F: 01383 435993145
FIBRE CLEAnIng & MARKER PRODuCTS
Isopropyl is the ideal alcohol cleaning agent for optical fibres and connectors 1Ltr bottle.
Dgel cleaner is designed to remove the blocking gels found on loose tube fibres and on external telephone cables.
Micro dust spray includes extension nozzle to remove dust from connector bulkeads. 290ml
Techlube is a water based gel lubricant optimised for the pulling of optical fibres in ducting. 3.78Ltrs
Protect and locate buried fibre optic cable by placing a marker tape above the cable. Tape is 75mm wide x 305Mtrs long. Continuously marked, available in detectable and non-detectable versions.
Alcohol bottles for the safe dispensing of Isoproyl.
Isopropyl Alcohol IPA-1
DGel Spray 0.94Ltr MT-F11091S
Canned Air MT-F1700
Cable Pulling Lube MT-TLF001J
Non Metalic Fibre Tape MT-F551165
Detectable Fibre Tape MT-F16508
Auto Plastic bottle MT-007PL
Auto Glass Bottle MT-007P
Isopropyl Alcohol & Bottles
gel Remover
Air Duster
Cable Pulling Lubricant
Buried Cable Marker Tape
TM
TM
TM
TM
TM
IPA1
MT-007PL/P
[email protected] www.minitran.co.uk
OTDR
Greenlee 920 series OTDRs are designed to be robust and cost effective test instruments. Simple and easy to use, one button Autotest feature chooses the optimal test settings for the test link and displays the results on a colour screen. Result traces can be saved for later uploading via the USB port. Dual wavelength versions for both the single and multimode units. Single mode version features a built-in VFL port.
Features:• Economical• Protective Rubber boot• Compact handheld design• Easy to use• Fast automated testing• Up to 35db dynamic range• Large backlight LCD display• Measure length and defects of coiled fibre• Fibre analysis software for data management and
report generation• RS-232/USB interface• NiMH batteries for 8 hours continuous
OTDR Trace View and measure test results using either event view mode or manual measurement mode.
Hi Res Event ViewEasy view and measure in high resolution mode. Active cursor snaps to the next event in the fibre analysis table.
Singlemode version features a 650nm 3mw Visual Fault Locator (VFL) port.
Both kits supplied with SC adaptors, batteries, charger, trace analysis software and a carry case.
OTDR Multimode kit 850/1300nm 920XC-20M-UPC-SC
OTDR Singlemode kit 1310/1550nm 920XC-20C-UPC-SC
FC Adaptor for 920XC 52026957
ST Adaptor for 920XC 52026958
SC Adaptor for 920XC 52026959
greenlee OTDR
Head Office: T: 01279 757775 • F: 01279 653535 Scotland: T: 01383 435985 • F: 01383 435993147
FIBRE LOSS KITS
The GRP series OPM are available in two versions. Both units are zero reference models but the GRP460 series offer the ability to save and upload 1K of test results per wavelength.
The GRP series OLS are available in two versions. The GDLS350 is for multimode applications and features 850 & 1300nm outputs, the GDLS355 is for singlemode applications and features both 1310 and 1550nm outputs. Additional features include a 2Khz tone generation which can be picked up by the GRP series OPMs.
Optical Power Meters
Optical Light Sources & Visual Fault Finder
The NEW Greenlee Mini Fibre Test (GMFT) range of fibre test tools allows you to configure a test kit to suit your exact needs. 2 Year warranty on Greenlee Micro fibre tools.
OPMs
Zero ref setting GRP450-02
Zero ref & Save GRP460-02
Adaptor caps
GRP Series 1.25mm Adaptor GAC021
GRP Series SC Adaptor GAC026
GRP Series FC Adaptor GAC028
GRP Series LC Adaptor GAC029
Optical Light sources
MM 850nm/1300nm GDLS350
SM 1310 /1550nm GDLS355
Adaptor Caps
GDLS series FC Adaptor GAC022
Visual Fault Finder (VFL)
The GVF610 is a high output 635nm visible laser source for fault location in splices, patchcords & connectors. 2.5mm universal adaptor for ST/SC/FC connectors GVF610
Power Meter Selector Do you need to save and print results?YES: use the GRP460-02; NO: use the GRP450-02The GRP meters are fitted with a 2.5mm universal interface. Use the GAC026 SC interface to match the GDLS light source interface Light Source Selector Are you testing: Multimode: Use GDLS350 Singlemode: Use GDLS355Both: Use both the GDLS 350 & GDLS355Visual Fault Locator: If a visual fault locator is required add a GVF610Deluxe carry case: Add a GDFC if a multi-instrument case is required. Each unit is supplied with a single case, the deluxe case allows all the instruments to be protected in a single case.
[email protected] www.minitran.co.uk
VISuAL InSPECTIOn SySTEM
Each GVIS system is supplied with a cleaning kit. Two versions of the probe and monitor are available, the -USB version features the ability of realtime image uploading to a PC via the onboard USB port for image achieving.
300 Monitor & probe Kit GVIS300MP
300 Monitor inc USB capture and Probe Kit GVIS300MP-USB
For those who do not require the monitor, the GVCM410 Video Capture Module allows the GVIS 300 Probe to be connected directly to a PC via a USB port without using the GVIS300 monitor. The end-face image can then be displayed directly on the computer using the Greenlee inspection software.
USB Video Capture Module GVCM410
The GVIS300 probe can be used as a replacement probe or in conjunction with the GVCM410 video capture module to allow endface inspection via a PC.
GVIS 300 Probe 2.5mm Universal tip GVIS300P
The GVIS series of inspection scopes offer an unique focusing system and a wide field of view for superb image quality. Inspection probe features blue LED endface illumination. 8-10 hours of operation from the advanced Li Ion battery with a 3 hour charge. Each kit is supplied with the monitor and probe, SC bulkhead adaptor and a 2.5mm connector adaptor.
Visual Inspection System
Accessories
SC bulkhead Adaptor GAC040
SC/APC Bulkhead Adaptor GAC041
FC Bulkhead Adaptor GAC042
LC Bulkhead Adaptor GAC044
ST Bulkhead Adaptor GAC046
1.25mm Universal Connector Adaptor GAC048
2.5mm Universal Connector Adaptor GAC049
GMFT Deluxe Carry Case GMFTDC
See our building to building laser links (FSO): pages 202-203 Fibre runner system. Contact us for details.
Head Office: T: 01279 757775 • F: 01279 653535 Scotland: T: 01383 435985 • F: 01383 435993149
SuMITOMO FuSIOn SPLICER
Features:• Fast dual independent heat shrink ovens • 7 Second splice time • High resolution, fully navigational touch screen
monitor • SD port for unlimited data storage + favorite
program, video, audio and software uploads • Internet interface for software upgrades • Industry’s only video & audio playback • Lightest weight & smallest footprint CA splicer • Ruggedised design for shock, water & dust
resistance • Automatic splice start, arc calibration, heater start
and fibre identification • Hard carrying case with integrated work platform • Multiple positional monitor with automatic display
inversion • Fibre holder or fibre clamp selectable • Long life battery for 200 splice and heater cycles
per charge • Lynx2-mini and lynx2–customfit® splice-on
connector compatibility • 3000 splce electrode life • 2.1Kg with battery
T-71C Kit includes:Splicer with dual ovens Sumitomo Precision Cleaver250um and 900um fibre holdersJacket stripper Battery pack AC interface/ChargerSpare ElectrodesCleaning ToolsShring sleeve cooling tray Fibre sleevesManual Hard Transit case
The Sumitomo T -71C is the Industry’s 1st and ONLY core alignment fusion splicer with a fully navigational touch screen interface for optimum user
friendliness, SD port for virtually unlimited data storage, plus favorite program, video, audio, and software uploads; Remote maintenance capability, the largest fiber view and the longest electrode life—with the legendary reliability common to all Sumitomo splicers. Although it’s also the lightest, smallest, and most advanced CA fusion splicer in the industry. The T-71C is more ruggedized with superior dust, shock and water-proof resistance making it the ideal choice for even the harshest environments.
Sumitomo T-71C Fusion Splicer
Sumitomo T-71C Splicer Kit T-71C
Mini5 Splicer Tool Kit MT-0053FS
Labelling systems: pages 94-96
All Sumitomo T-71C kits purchased from Minitran include a one day fibre training course on the use of this splicer.
[email protected] www.minitran.co.uk
nETWORK AnALySERS
LANXperts are supplied with the relevant modules, AC adaptor, case and instructions.
Model
10/100/1000BaseT
Single/Multmode Fibre
Network Analysis
RFC2544 Test
Loopback Test
Cable Test
PoE test
Inline testing
VoIP testing
Packet capture
Traffic Generator
LE85
√
√
√
√
√
-
-
√
√
√
√
LE80
√
-
√
√
-
√
√
√
√
√
√
The Psiber LANxpert range of network analysers allow network professionals to quickly maintain and optimise network services. Two models are available, the LE80 for 10/100/1000Mbps copper networks and the LE85 Gigabit copper and Gigabit fibre version.
LE85 Version is designed for analysis of Gigabit fibre links. Offering a similar core feature set to the LE80 analyser, except this unit is optmised for gigabit fibre links.To test copper links the copper SFP is used. Two versions of the LE85 are available, the LE85M for multimode and copper analysis and the LE85S for singlemode and copper analysis. Additional SFP are available.
The LE80 offers 10/100/1000Mbps Copper Ethernet network analysis • Colour touch screen• Inline packet Inspection• Identify Traffic Protocols with amount and
percentage breakdowns• Captures upto 10K packets for analysis • Measures PoE voltage and Power • VoIP traffic, call statistics & Quality • IPv6 detection • RFC2544 Stress testing • Identify standard link, frame & traffic problems • Test cables for wiremap and length
LE85 Multimode/Copper LE85M
LE85 Single mode/Copper LE85S
Additional SFP Modules
SFP Gigabit Copper GB-D01AN
SFP Gigabit SX MM MM-F12CY
SFP Gigabit LX SM SM-F22EY
LANXpert Gigabit Analyser LE80
gigabit Fibre & Copper Analysers
Copper Ethernet network Analyser