Output RatingsGenerating Set Model P200H2 P220HE2

380-415V,50Hz200.0 kVA 220.0 kVA

176.0 kW160.0 kW

200.0 kW250.0 kVA

180.0 kW225.0 kVA

480V, 60 HzRatings at power factor.0.8

Technical DataEngine Make & Model:

Bore/Stroke: mm (in)Compression Ratio:

Induction:

Perkins 1306C-E87TAG4

Alternator Model: LL5014FNo. of Cylinders/Alignment: 6 / In LineDisplacement: litres (cu.in) 8.7 (530.9)

116.6 (4.6)/135.9 (5.4)16.9:1

Engine Speed:Gross Engine Power: kW (hp)BMEP: kPa (psi)Piston Speed: m/sec (ft/sec)Fuel Tank Capacity: litres (US ga l)Fuel Consump,

Fuel Consump,

Heat Rejected toExhaust System: kW (Btu/min)

Heat Rejected toWater & Lube Oil: kW (Btu/min)Heat Radiation to Room: kW (Btu/min)Exhaust Gas Temperature: °C (°F)Radiator CoolingAir Flow: m⇡/min (cfm)Cooling system designed to operate inambient conditions up to 50°C (122°F)*

Combustion Air Flow: m⇡/min (cfm)Exhaust Gas Flow: m⇡/min (cfm)

Frequency:

Turbocharged A ir To A ir Charge Cooled

50 Hz 60 Hz1800 RPM1500 RPM246.8 (331.0)228.5 (306.0)1890.0 (274.1)2099.0 (304.5)8.2 (26.9)6.8 (22.3)350 (92.5)350 (92.5)

56.6 (15.0)49.4 (13.1)

61.1 (16.1)54.3 (14.3)

104.0 (5914)

86.0 (4891)

34.0 (1934)573 (1064)

424.2 (14980)

14.9 (526)29.7 (1049)

P200H2

P220HE2

l/hr (USg/hr)

l/hr (USg/hr)

20.2 (713)

104 (5914)

88.0 (5004)

34.0 (1934)487 (908)

560.4 (19790)

49.2 (1737)

Length: mm (in) Width: mm (in) Height: mm (in) Dry: kg (lb) Wet: kg (lb)2960 (116.5) 1003 (39.5) 1718 (67.6) 2015 (4442) 2052 (4524)

Dry = With Lube O il Wet = With Lube O il and coolant

Dimensions and Weights

Ratings in accordance with ISO 8528, ISO 3046, IEC 60034, BS5000 and NEMA MG-1/22.Generating set pictured may include optiona l accessories.

Ratings Definitions Prime Power - ModelThese ratings are applicable for supplying continuous electrica lpower (at variable load) in lieu of commercia lly purchased power.There is no limitation to the annua l hours of operation and thismodel can supply 10% overload power for 1 hour in 12 hours. Standby Power - ModelThese ratings are applicable for supplying continuous electrica lpower (at variable load) in the event of a utility power fa ilure. Nooverload is permitted on these ratings. The a lternator on this modelis peak continuous rated (as defined in ISO 8528-3).

P200H2 / P220HE2

P200H2

P220HE2

* Contact your loca l FG Wilson dea ler for power ratings at specific site conditions.

In line with our policy of continuous product development, we reserve the right to change specification without notice

FG Wilson has manufacturing facilities in the following locations:Northern Ireland · Brazil · China · India · USAWith headquarters in Northern Ireland, FG Wilson operates through a G loba l

Dea ler Network. To contact your loca l Sa les O ffice please visit the FG Wilson

website at www.FGWilson.com

www.FGWilson.com

P200H2 / P220HE2/1PP/0607/GB