fgs hardware - superior quality frameless glass & … 2018...commonly glass facades. the hdf...
TRANSCRIPT
13A Technology Dr, Arundel, QLD 4126 H1
page
© Copyright 2018 This document & its contents including images, drawings & specification are the exclusive property of Fethers Glazing Systems Pty Ltd, & must not be copied or used directly or indirectly in any way. Unauthorised use may result in legal action.
Heavy Duty Fin Fixed Range
Product Page Numbers
HDF-1 H2&3
HDF-1-45 H4&5
HDF-2-45 H6&7
HDF-2-90 H8&9
HDF-2-180 H10&11
HDF-3 H12&13
HDF-4 H14&15
The Affix HDF Range of Spider Fittings are suitable for a variety of applications - most commonly glass facades.
The HDF Range can also be used for other glass applications including balustrading, glass pool fencing or canopies.
HDF-1-45 HDF-1-45HDF-2-45
HDF-1 HDF-1
HDF-2-90 HDF-2-90
HDF-1-45HDF-1-45 HDF-1-45 HDF-1-45 HDF-2-45
HDF-2-180 HDF-2-180 HDF-2-180
HDF-4HDF-3HDF-4
HDF-2-45HDF-2-45
97 Ricketts Rd, Mt Waverley, VIC 3149T.(03) 8562 0881 E [email protected]
H2page
© Copyright 2018 This document & its contents including images, drawings & specification are the exclusive property of Fethers Glazing Systems Pty Ltd, & must not be copied or used directly or indirectly in any way. Unauthorised use may result in legal action.
97 Ricketts Rd, Mt Waverley, VIC 3149T.(03) 8562 0881 E [email protected]
13A Technology Dr, Arundel, QLD 4126
• Designed for BOLT THROUGH applications in beams and mullions thicker than 19mm.
• Ideal for thin walled RHS/ SHS box sections.• Suitable for steel supported glass facades,
floors or overhead glazing.• A4-70, M10 all thread can be supplied on
request
1 ARM SUIT RHS/SHS BOX SECTIONS - NO THREAD HDF-1-N
1 ARM SUIT GLASS OR STEEL FIN MEMBER - THREAD HDF-1-10/12/15/19T
• Designed for SIDE FIXED - BOLT THROUGH applications in glass or steel fins 10,12,15 & 19mm thick
• Can be adapted to suit thicker structural fins request.
• A4-70, M10 all thread and isolating nylon bushing supplied as standard
1 ARM SUIT WALL SUBSTRATES - WALL FIX HDF-1-W
• Designed for SIDE FIXED - BOLT ON applications into supporting substrates.
• Suitable for concrete slabs, timber walls, drill and tapped steel sections
• A4-70, M10 x 100mm all thread supplied as standard. M10 timber lag screw and cut to length all thread can be supplied on request
See following page for technical drawing
HDF-1 Range
H3page
© Copyright 2018 This document & its contents including images, drawings & specification are the exclusive property of Fethers Glazing Systems Pty Ltd, & must not be copied or used directly or indirectly in any way. Unauthorised use may result in legal action.
97 Ricketts Rd, Mt Waverley, VIC 3149T.(03) 8562 0881 E [email protected]
13A Technology Dr, Arundel, QLD 4126
HDF-1 Range
HDF-1-T Variant
HDF-1-W Variant
FRONT VIEWLEFT VIEW
100
140
40
TOP VIEWDETAIL A
A
50
100
18
40
65
Handing convention: As viewed from building exterior
NONONONO13
EPDMgasket
8
Clampingplate
Non cracked concreteMin. 32MPa
25
FRONT VIEWLEFT VIEW
100
140
40
TOP VIEWDETAIL A
A
50
100
18
40
65
Handing convention: As viewed from building exterior
NONONONO13
EPDMgasket
8
Clampingplate
RHS post
25
FRONT VIEWLEFT VIEW
100
140
40
TOP VIEW
DETAIL A
A
50
T - Fin thickness
100
18
40
65
min. glass finthickness = 12mm
Handing convention: As viewed from building exterior
NONONONO
1 3EPDMgasket
8
Clampingplate
25
HDF-1-N Variant
Rod length required = <substrate thickness> +26 +/- 2
H4page
© Copyright 2018 This document & its contents including images, drawings & specification are the exclusive property of Fethers Glazing Systems Pty Ltd, & must not be copied or used directly or indirectly in any way. Unauthorised use may result in legal action.
97 Ricketts Rd, Mt Waverley, VIC 3149T.(03) 8562 0881 E [email protected]
13A Technology Dr, Arundel, QLD 4126
• Designed for BOLT THROUGH applications in beams and mullions thicker than 19mm.
• Ideal for thin walled RHS/ SHS box sections.• Suitable for steel supported glass facades,
floors or overhead glazing.• A4-70, M10 all thread can be supplied on
request
1 ARM 45° SUIT RHS/SHS BOX SECTIONS - NO THREAD HDF-1-45L-N - LEFT HAND HDF-1-45R-N - RIGHT HAND
1 ARM 45° SUIT GLASS OR STEEL FIN MEMBER - THREAD HDF-1-45L-10/12/15/19T - LEFT HAND HDF-1-45R-10/12/15/19T- RIGHT HAND
• Designed for SIDE FIXED - BOLT THROUGH applications in glass or steel fins 10,12,15 & 19mm thick
• Can be adapted to suit thicker structural fins request.
• Ideal for thin walled RHS/ SHS box sections.• A4-70, M10 all thread and isolating nylon
bushing supplied as standard
1 ARM 45° SUIT WALL SUBSTRATES - WALL FIX HDF-1-45L-W - LEFT HAND HDF-1-45R-W - RIGHT HAND
• Designed for SIDE FIXED - BOLT ON applications into supporting substrates.
• Suitable for concrete slabs, timber walls, drill and tapped steel sections
• A4-70, M10 x 100mm all thread supplied as standard. M10 timber lag screw and cut to length all thread can be supplied on request
See following page for technical drawing
HDF-1-45 Range
H5page
© Copyright 2018 This document & its contents including images, drawings & specification are the exclusive property of Fethers Glazing Systems Pty Ltd, & must not be copied or used directly or indirectly in any way. Unauthorised use may result in legal action.
97 Ricketts Rd, Mt Waverley, VIC 3149T.(03) 8562 0881 E [email protected]
13A Technology Dr, Arundel, QLD 4126
HDF-1-45 RangeHDF-1-45L-N Variant
HDF-1-45L-T Variant
HDF-1-45L-W Variant
FRONT VIEWLEFT VIEW
100
170
40
TOP VIEWDETAIL A
A
50
125
18
65
Handing convention: As viewed from building exterior
NONONONO13
EPDMgasket
8
Clampingplate
RHS post
40
100
25
FRONT VIEWLEFT VIEW
100
170
40
TOP VIEW
DETAIL A
A
50
T - Fin thickness
125
18
40
65
min. glass finthickness = 12mm
Handing convention: As viewed from building exterior
NONONONO
1 3EPDMgasket
8
Clampingplate
100
25
FRONT VIEWLEFT VIEW
100
170
40
TOP VIEWDETAIL A
A
50
Fin fixture
18
65
Handing convention: As viewed from building exterior
NONONONO13
EPDMgasket
8
Clampingplate
Non cracked concreteMin. 32MPa
100
40
25
125
Rod length required = <substrate thickness> +26 +/- 2
H6page
© Copyright 2018 This document & its contents including images, drawings & specification are the exclusive property of Fethers Glazing Systems Pty Ltd, & must not be copied or used directly or indirectly in any way. Unauthorised use may result in legal action.
97 Ricketts Rd, Mt Waverley, VIC 3149T.(03) 8562 0881 E [email protected]
13A Technology Dr, Arundel, QLD 4126
• Designed for BOLT THROUGH applications in beams and mullions thicker than 19mm.
• Ideal for thin walled RHS/ SHS box sections.• Suitable for steel supported glass facades,
floors or overhead glazing.• A4-70, M10 all thread can be supplied on
request
2 ARM 45° SUIT RHS/SHS BOX SECTIONS - NO THREADHDF-2-45-N
2 ARM 45° SUIT GLASS OR STEEL FIN MEMBER - THREAD HDF-2-45-10/12/15/19T
• Designed for SIDE FIXED - BOLT THROUGH applications in glass or steel fins 10,12,15 & 19mm thick
• Can be adapted to suit thicker structural fins on request.
• A4-70, M10 all thread and isolating nylon bushing supplied as standard
See following page for technical drawing
HDF-2-45 Range
97 Ricketts Rd, Mt Waverley, VIC 3149T.(03) 8562 0881 E [email protected]
H7page
© Copyright 2018 This document & its contents including images, drawings & specification are the exclusive property of Fethers Glazing Systems Pty Ltd, & must not be copied or used directly or indirectly in any way. Unauthorised use may result in legal action.
13A Technology Dr, Arundel, QLD 4126
HDF-2-45 Range
HDF-2-45-N Variant
HDF-2-45-T Variant
FRONT VIEWLEFT VIEW
100
170
40
TOP VIEW
DETAIL A
A50
125
18
65
Handing convention: As viewed from building exterior
NONONONO13
EPDMgasket
8
Clampingplate
8mmhex s
RHS post
40
100
25100
FRONT VIEW RIGHT VIEW
100
170
40
TOP VIEW
DETAIL A
A
50
T - Fin thickness
125
1840
65
min. glass finthickness = 12mm
Handing convention: As viewed from building exterior
NONONONO
1 3
EPDMgasket
8
Clampingplate
100
25
Rod length required = <substrate thickness> +26 +/- 2
H8page
© Copyright 2018 This document & its contents including images, drawings & specification are the exclusive property of Fethers Glazing Systems Pty Ltd, & must not be copied or used directly or indirectly in any way. Unauthorised use may result in legal action.
97 Ricketts Rd, Mt Waverley, VIC 3149T.(03) 8562 0881 E [email protected]
13A Technology Dr, Arundel, QLD 4126
• Designed for BOLT THROUGH applications in beams and mullions thicker than 19mm.
• Ideal for thin walled RHS/ SHS box sections.• Suitable for steel supported glass facades,
floors or overhead glazing.• A4-70, M10 all thread can be supplied on
request
2 ARM 90° SUIT RHS/SHS BOX SECTIONS - NO THREAD HDF-2-90-N
2 ARM 90° SUIT GLASS OR STEEL FIN MEMBER - THREAD HDF-2-90-10/12/15/19T
• Designed for SIDE FIXED - BOLT THROUGH applications in glass or steel fins 10,12,15 & 19mm thick
• Can be adapted to suit thicker structural fins on request..
• A4-70, M10 all thread and isolating nylon bushing supplied as standard
2 ARM 90° SUIT WALL SUBSTRATES - WALL FIX HDF-2-90-W
• Designed for SIDE FIXED - BOLT ON applications into supporting substrates.
• Suitable for concrete slabs, timber walls, drill and tapped steel sections
• A4-70, M10 x 100mm all thread supplied as standard. M10 timber lag screw and cut to length all thread can be supplied on request
See following page for technical drawing
HDF-2-90 Range
H9page
© Copyright 2018 This document & its contents including images, drawings & specification are the exclusive property of Fethers Glazing Systems Pty Ltd, & must not be copied or used directly or indirectly in any way. Unauthorised use may result in legal action.
97 Ricketts Rd, Mt Waverley, VIC 3149T.(03) 8562 0881 E [email protected]
13A Technology Dr, Arundel, QLD 4126
HDF-2-90 RangeHDF-2-90-N Variant
HDF-2-90-T Variant
HDF-2-90-W Variant
FRONT VIEWLEFT VIEW
100
170
40
TOP VIEW
DETAIL A
A
50
T - Fin thickness
125
18
40
65
min. glass finthickness = 12mm
Handing convention: As viewed from building exterior
NONONONO
1 3EPDMgasket
8
Clampingplate
100
15
22
25
100
200
FRONT VIEWLEFT VIEW
100
170
40
TOP VIEWDETAIL A
A
50
125
18
65
Handing convention: As viewed from building exterior
NONONONO13
EPDMgasket
8
Clampingplate
RHS post
40
100
1522
100
200
FRONT VIEWLEFT VIEW
100
170
40
TOP VIEWDETAIL A
A
50
125
18
65
Handing convention: As viewed from building exterior
NONONONO13
EPDMgasket
8
Clampingplate
Non cracked concreteMin. 32MPa
100
40
1522
100
200
25
Rod length required = <substrate thickness> +26 +/- 2
H10page
© Copyright 2018 This document & its contents including images, drawings & specification are the exclusive property of Fethers Glazing Systems Pty Ltd, & must not be copied or used directly or indirectly in any way. Unauthorised use may result in legal action.
97 Ricketts Rd, Mt Waverley, VIC 3149T.(03) 8562 0881 E [email protected]
13A Technology Dr, Arundel, QLD 4126
• Designed for BOLT THROUGH applications in beams and mullions thicker than 19mm.
• Ideal for thin walled RHS/ SHS box sections.• Suitable for steel supported glass facades,
floors or overhead glazing.• A4-70, M10 all thread can be supplied on
request
2 ARM 180° SUIT RHS/SHS BOX SECTIONS - NO THREAD HDF-2-180-N
2 ARM 180° SUIT GLASS OR STEEL FIN MEMBER - THREAD HDF-2-180-10/12/15/19T
• Designed for SIDE FIXED - BOLT THROUGH applications in glass or steel fins 10,12,15 & 19mm thick
• Can be adapted to suit thicker structural fins on request.
• A4-70, M10 all thread and isolating nylon bushing supplied as standard
See following page for technical drawing
HDF-2-180 Range
97 Ricketts Rd, Mt Waverley, VIC 3149T.(03) 8562 0881 E [email protected]
H11page
© Copyright 2018 This document & its contents including images, drawings & specification are the exclusive property of Fethers Glazing Systems Pty Ltd, & must not be copied or used directly or indirectly in any way. Unauthorised use may result in legal action.
13A Technology Dr, Arundel, QLD 4126
HDF-2-180
HDF-2-180-N Variant
HDF-2-180-T Variant
FRONT VIEWLEFT VIEW
100
140
40
TOP VIEW
DETAIL A
A50
100
18
65
Handing convention: As viewed from building exterior
NONONONO13
EPDMgasket
8
Clampingplate
8mmhex s
RHS post
40
25
100
FRONT VIEW RIGHT VIEW
100
140
40
TOP VIEW
DETAIL A
A
50
T - Fin thickness
100
18
40
65
min. glass finthickness = 12mm
Handing convention: As viewed from building exterior
NONONONO
1 3
EPDMgasket
8
Clampingplate
100
25
Rod length required = <substrate thickness> +26 +/- 2
H12page
© Copyright 2018 This document & its contents including images, drawings & specification are the exclusive property of Fethers Glazing Systems Pty Ltd, & must not be copied or used directly or indirectly in any way. Unauthorised use may result in legal action.
97 Ricketts Rd, Mt Waverley, VIC 3149T.(03) 8562 0881 E [email protected]
13A Technology Dr, Arundel, QLD 4126
• Designed for BOLT THROUGH applications in beams and mullions thicker than 19mm.
• Ideal for thin walled RHS/ SHS box sections.• Suitable for steel supported glass facades,
floors or overhead glazing.• A4-70, M10 all thread can be supplied on
request
3 ARM SUIT RHS/SHS BOX SECTIONS - NO THREAD HDF-3-N
3 ARM SUIT GLASS OR STEEL FIN MEMBER - THREAD HDF-3-10/12/15/19T
• Designed for SIDE FIXED - BOLT THROUGH applications in glass or steel fins 10,12,15 & 19mm thick
• Can be adapted to suit thicker structural fins on request.
• A4-70, M10 all thread and isolating nylon bushing supplied as standard
See following page for technical drawing
HDF-3 Range
97 Ricketts Rd, Mt Waverley, VIC 3149T.(03) 8562 0881 E [email protected]
H13page
© Copyright 2018 This document & its contents including images, drawings & specification are the exclusive property of Fethers Glazing Systems Pty Ltd, & must not be copied or used directly or indirectly in any way. Unauthorised use may result in legal action.
13A Technology Dr, Arundel, QLD 4126
HDF-3 Range
HDF-3-N Variant
HDF-3-T Variant
FRONT VIEWLEFT VIEW
100
170
40
TOP VIEW
DETAIL A
A50
125
18
65
Handing convention: As viewed from building exterior
NONONONO13
EPDMgasket
8
Clampingplate
8mmhex
RHS post
40
100
15
22
10025
100
200
FRONT VIEW RIGHT VIEW
100
170
40
TOP VIEW
DETAIL A
A
50
T - Fin thickness
125
18
40
65
min. glass finthickness = 12mm
Handing convention: As viewed from building exterior
NONONONO
1 3
EPDMgasket
Clampingplate
8
100
15
22
100
200
25
Rod length required = <substrate thickness> +26 +/- 2
H14page
© Copyright 2018 This document & its contents including images, drawings & specification are the exclusive property of Fethers Glazing Systems Pty Ltd, & must not be copied or used directly or indirectly in any way. Unauthorised use may result in legal action.
97 Ricketts Rd, Mt Waverley, VIC 3149T.(03) 8562 0881 E [email protected]
13A Technology Dr, Arundel, QLD 4126
• Designed for BOLT THROUGH applications in beams and mullions thicker than 19mm.
• Ideal for thin walled RHS/ SHS box sections.• Suitable for steel supported glass facades,
floors or overhead glazing.• A4-70, M10 all thread can be supplied on
request
4 ARM SUIT RHS/SHS BOX SECTIONS - NO THREAD HDF-4-N
SUIT GLASS OR STEEL FIN MEMBER - THREAD HDF-4-10/12/15/19T
• Designed for SIDE FIXED - BOLT THROUGH applications in glass or steel fins 10,12,15 & 19mm thick
• Can be adapted to suit thicker structural fins request..
• A4-70, M10 all thread and isolating nylon bushing supplied as standard
See following page for technical drawing
HDF-4 Range
97 Ricketts Rd, Mt Waverley, VIC 3149T.(03) 8562 0881 E [email protected]
H15page
© Copyright 2018 This document & its contents including images, drawings & specification are the exclusive property of Fethers Glazing Systems Pty Ltd, & must not be copied or used directly or indirectly in any way. Unauthorised use may result in legal action.
13A Technology Dr, Arundel, QLD 4126
HDF-4 Range
HDF-4-N Variant
HDF-4-T Variant
FRONT VIEW RIGHT VIEW
100
170
40
TOP VIEW
DETAIL A
A
50
T - Fin thickness
125
18
40
65
min. glass finthickness = 12mm
Handing convention: As viewed from building exterior
NONONONO
1 3
EPDMgasket
8
Clampingplate
100
15
22
100
100
200
25
FRONT VIEWLEFT VIEW
100
170
40
TOP VIEW
DETAIL A
A50
125
18
65
Handing convention: As viewed from building exterior
NONONONO13
EPDMgasket
8
Clampingplate
8mmhex s
RHS post
40
100
15
22
100
100
200
25
Rod length required = <substrate thickness> +26 +/- 2
H16page
© Copyright 2018 This document & its contents including images, drawings & specification are the exclusive property of Fethers Glazing Systems Pty Ltd, & must not be copied or used directly or indirectly in any way. Unauthorised use may result in legal action.
97 Ricketts Rd, Mt Waverley, VIC 3149T.(03) 8562 0881 E [email protected]
13A Technology Dr, Arundel, QLD 4126
© Copyright 2018 This document & its contents including images, drawings & specification are the exclusive property of Fethers Glazing Systems Pty Ltd, & must not be copied or used directly or indirectly in any way. Unauthorised use may result in legal action.
Heavy Duty Post Fixed Range
Product Page Numbers
HDP-1 H17&18
HDP-1-45 H17&18
HDP-2-90 H19&20
HDP-2-180 H19&20
HDP-3 H21&22
HDP-4 H21&22
HDP-180-RET H23&24
HDP-4-RET H23&24
HDP-1
HDP-1
HDP-1-45
HDP-1-45
HDP-1-45
HDP-1-45
HDP-2-180 RET
HDP-2-180 RET
HDP-2-180 RET
HDP-4-RET
HDP-2-180
HDP-4HDP-3
HDP-2-90
HDP-2-90
HDP-2-90
HDP-2-90
The Affix HDP Range of Spider Fittings are suitable for a variety of applications. Most commonly for bolting through steel sections or into concrete or timber.
Suitable for steel supported glass facades, floors and overhead glazing.
97 Ricketts Rd, Mt Waverley, VIC 3149T.(03) 8562 0881 E [email protected]
H17page
© Copyright 2018 This document & its contents including images, drawings & specification are the exclusive property of Fethers Glazing Systems Pty Ltd, & must not be copied or used directly or indirectly in any way. Unauthorised use may result in legal action.
13A Technology Dr, Arundel, QLD 4126
• Designed for FACE FIXED applications. • Ideal for bolting through steel sections or
bolting into concrete/timber.• Suitable for steel supported glass facades,
floors or overhead glazing.• A4-70, M16 x 110mm all thread, M16 hex
nuts and M16 wedge lock washers sup-plied as standard.
• M16 timber lag screw and cut to length M16 all thread can be supplied on request
1 ARM HEAVY DUTY POST FIXEDHDP-1
1 ARM 45° HEAVY DUTY POST FIXEDHDP-1-45
See following page for technical drawing
HDP-1 Range
• Designed for FACE FIXED applications. • Ideal for bolting through steel sections or
bolting into concrete/timber.• Suitable for steel supported glass facades,
floors or overhead glazing.• A4-70, M16 x 110mm all thread, M16 hex
nuts and M16 wedge lock washers sup-plied as standard.
• M16 timber lag screw and cut to length M16 all thread can be supplied on request
H18page
© Copyright 2018 This document & its contents including images, drawings & specification are the exclusive property of Fethers Glazing Systems Pty Ltd, & must not be copied or used directly or indirectly in any way. Unauthorised use may result in legal action.
97 Ricketts Rd, Mt Waverley, VIC 3149T.(03) 8562 0881 E [email protected]
13A Technology Dr, Arundel, QLD 4126
HDP-1 Range
HDP-1
HDP-1-45
100
40
60
12
86
35.6
HDP-1HDP-1HDP-1HDP-1
18
60
12
100
100
40
86
35.6
HDP-1-45HDP-1-45HDP-1-45HDP-1-45
141.4
18
97 Ricketts Rd, Mt Waverley, VIC 3149T.(03) 8562 0881 E [email protected]
H19page
© Copyright 2018 This document & its contents including images, drawings & specification are the exclusive property of Fethers Glazing Systems Pty Ltd, & must not be copied or used directly or indirectly in any way. Unauthorised use may result in legal action.
13A Technology Dr, Arundel, QLD 4126
• Designed for FACE FIXED applications. • Ideal for bolting through steel sections or
bolting into concrete/timber.• Suitable for steel supported glass facades,
floors or overhead glazing.• A4-70, M16 x 110mm all thread, M16 hex
nuts and M16 wedge lock washers sup-plied as standard.
• M16 timber lag screw and cut to length M16 all thread can be supplied on request
2 ARM 180° HEAVY DUTY POST FIXEDHDP-2-180
2 ARM 90° HEAVY DUTY POST FIXEDHDP-2-90
See following page for technical drawing
HDP-2 Range
• Designed for FACE FIXED applications. • Ideal for bolting through steel sections or
bolting into concrete/timber.• Suitable for steel supported glass facades,
floors or overhead glazing.• A4-70, M16 x 110mm all thread, M16 hex
nuts and M16 wedge lock washers sup-plied as standard.
• M16 timber lag screw and cut to length M16 all thread can be supplied on request
H20page
© Copyright 2018 This document & its contents including images, drawings & specification are the exclusive property of Fethers Glazing Systems Pty Ltd, & must not be copied or used directly or indirectly in any way. Unauthorised use may result in legal action.
97 Ricketts Rd, Mt Waverley, VIC 3149T.(03) 8562 0881 E [email protected]
13A Technology Dr, Arundel, QLD 4126
HDP-2 Range
HDP-2-180
HDP-2-90
200
100 100
40
12
60
35.6
86
HDP-2-180HDP-2-180HDP-2-180HDP-2-180
18
40 200
100 100
100
60
12
86
35.6
HDP-2-90HDP-2-90HDP-2-90HDP-2-90
18
97 Ricketts Rd, Mt Waverley, VIC 3149T.(03) 8562 0881 E [email protected]
H21page
© Copyright 2018 This document & its contents including images, drawings & specification are the exclusive property of Fethers Glazing Systems Pty Ltd, & must not be copied or used directly or indirectly in any way. Unauthorised use may result in legal action.
13A Technology Dr, Arundel, QLD 4126
• Designed for FACE FIXED applications. • Ideal for bolting through steel sections or
bolting into concrete/timber.• Suitable for steel supported glass facades,
floors or overhead glazing.• A4-70, M16 x 110mm all thread, M16 hex
nuts and M16 wedge lock washers sup-plied as standard.
• M16 timber lag screw and cut to length M16 all thread can be supplied on request
3 ARM HEAVY DUTY POST FIXEDHDP-3
4 ARM HEAVY DUTY POST FIXEDHDP-4
See following page for technical drawing
HDP-3
• Designed for FACE FIXED applications. • Ideal for bolting through steel sections or
bolting into concrete/timber.• Suitable for steel supported glass facades,
floors or overhead glazing.• A4-70, M16 x 110mm all thread, M16 hex
nuts and M16 wedge lock washers sup-plied as standard.
• M16 timber lag screw and cut to length M16 all thread can be supplied on request
HDP-4
H22page
© Copyright 2018 This document & its contents including images, drawings & specification are the exclusive property of Fethers Glazing Systems Pty Ltd, & must not be copied or used directly or indirectly in any way. Unauthorised use may result in legal action.
97 Ricketts Rd, Mt Waverley, VIC 3149T.(03) 8562 0881 E [email protected]
13A Technology Dr, Arundel, QLD 4126
HDP-3
HDP-3
HDP-4
200
100 100
100
10020
060
86
1235
.640
HDP-3HDP-3HDP-3HDP-3
18
200
200
100
100
100100
40
60
1235
.6
86
HDP-4HDP-4HDP-4HDP-4
18
HDP-4
97 Ricketts Rd, Mt Waverley, VIC 3149T.(03) 8562 0881 E [email protected]
H23page
© Copyright 2018 This document & its contents including images, drawings & specification are the exclusive property of Fethers Glazing Systems Pty Ltd, & must not be copied or used directly or indirectly in any way. Unauthorised use may result in legal action.
13A Technology Dr, Arundel, QLD 4126
• Designed for FACE FIXED applications. • Ideal for bolting through steel sections or
bolting into concrete/timber.• Suitable for steel supported glass facades,
floors or overhead glazing.• A4-70, M16 x 110mm all thread, M16 hex
nuts and M16 wedge lock washers sup-plied as standard.
• M16 timber lag screw and cut to length M16 all thread can be supplied on request
2 ARM HEAVY DUTY POST FIXED FOR 90° GLASS RETURN APPLICATIONSHDP-2-180-RET
4 ARM HEAVY DUTY POST FIXED FOR 90° GLASS RETURN APPLICATIONSHDP-4-RET
See following page for technical drawing
HDP-2-180-RET
• Designed for FACE FIXED applications. • Ideal for bolting through steel sections or
bolting into concrete/timber.• Suitable for steel supported glass facades,
floors or overhead glazing.• A4-70, M16 x 110mm all thread, M16 hex
nuts and M16 wedge lock washers sup-plied as standard.
• M16 timber lag screw and cut to length M16 all thread can be supplied on request
HDP-4-RET
H24page
© Copyright 2018 This document & its contents including images, drawings & specification are the exclusive property of Fethers Glazing Systems Pty Ltd, & must not be copied or used directly or indirectly in any way. Unauthorised use may result in legal action.
97 Ricketts Rd, Mt Waverley, VIC 3149T.(03) 8562 0881 E [email protected]
13A Technology Dr, Arundel, QLD 4126
HDP-2-180-RET
HDP-2-180-RET
HDP-4-RET
90°
115.3115.3
163
31.7
12
30230.5
HDP-2-180-RETHDP-2-180-RETHDP-2-180-RETHDP-2-180-RET
A
18
40
230.5
115.3 115.3
213.
6
106.
710
6.8
90°31.7
16312
30
HDP-4-RETHDP-4-RETHDP-4-RETHDP-4-RET
A
18
40
163
HDP-4-RET
13A Technology Dr, Arundel, QLD 4126 H25
page
© Copyright 2018 This document & its contents including images, drawings & specification are the exclusive property of Fethers Glazing Systems Pty Ltd, & must not be copied or used directly or indirectly in any way. Unauthorised use may result in legal action.
Light Duty Fin Fixed Range
Product Page Numbers
LDF-1 H26&27
LDF-2-90 H28&29
LDF-2-180 H30&31
LDF-4 H32&33
The Affix LDF Range of Spider Fittings are suitable for a variety of applications - most glass balustrading or barrier applications..
The LDF Range can also be used for other glass applications including facades, glass pool fencing or canopies.
LDF-1 LDF-1
LDF-1LDF-1
LDF-2-180
LDF-2-180
LDF-2-90LDF-2-90
LDF-4
97 Ricketts Rd, Mt Waverley, VIC 3149T.(03) 8562 0881 E [email protected]
H26page
© Copyright 2018 This document & its contents including images, drawings & specification are the exclusive property of Fethers Glazing Systems Pty Ltd, & must not be copied or used directly or indirectly in any way. Unauthorised use may result in legal action.
97 Ricketts Rd, Mt Waverley, VIC 3149T.(03) 8562 0881 E [email protected]
13A Technology Dr, Arundel, QLD 4126
• Designed for BOLT THROUGH applications in beams and mullions thicker than 15mm.
• Ideal for thin walled RHS/ SHS box sections.• Suitable for steel supported glass facades,
floors or overhead glazing.• A4-70, M10 all thread can be supplied on
request
1 ARM SUIT RHS/SHS BOX SECTIONS - NO THREAD LDF-1-N
1 ARM SUIT GLASS OR STEEL FIN MEMBER - THREAD LDF-1-10/12/15T
• Designed for SIDE FIXED - BOLT THROUGH applications in glass or steel fins 10,12 & 15mm
• Can be adapted to suit thicker structural fins request..
• A4-70, M10 all thread and isolating nylon bushing supplied as standard
1 ARM SUIT WALL SUBSTRATES - WALL FIX LDF-1-W
• Designed for SIDE FIXED - BOLT ON applications into supporting substrates.
• Suitable for concrete slabs, timber walls, drill and tapped steel sections
• A4-70, M10 x 100mm all thread supplied as standard. M10 timber lag screw and cut to length all thread can be supplied on request
See following page for technical drawing
LDF-1 Range
H27page
© Copyright 2018 This document & its contents including images, drawings & specification are the exclusive property of Fethers Glazing Systems Pty Ltd, & must not be copied or used directly or indirectly in any way. Unauthorised use may result in legal action.
97 Ricketts Rd, Mt Waverley, VIC 3149T.(03) 8562 0881 E [email protected]
13A Technology Dr, Arundel, QLD 4126
LDF-1 RangeLDF-1-N Variant
LDF-1-T Variant
LDF-1-W Variant
FRONT VIEWLEFT VIEW
56
110
36
TOP VIEWDETAIL A
A
40
68
15
35
55
Handing convention: As viewed from building exterior
NONONONO1
3
EPDMgasket
4
Clampingplate
RHS post
FRONT VIEWLEFT VIEW
56
110
36
TOP VIEW
DETAIL A
A
40
T - Fin thickness
68
15
35
55
min. glass finthickness = 12mm
Handing convention: As viewed from building exterior
NONONONO
1
3
EPDMgasket
4
Clampingplate
21
FRONT VIEWLEFT VIEW
56
110
36
TOP VIEWDETAIL A
A
40
68
15
35
55
Handing convention: As viewed from building exterior
NONONONO1
3
EPDMgasket
4
Clampingplate
Non cracked concreteMin. 32MPa
Rod length required = <substrate thickness> +20 +/- 2
H28page
© Copyright 2018 This document & its contents including images, drawings & specification are the exclusive property of Fethers Glazing Systems Pty Ltd, & must not be copied or used directly or indirectly in any way. Unauthorised use may result in legal action.
97 Ricketts Rd, Mt Waverley, VIC 3149T.(03) 8562 0881 E [email protected]
13A Technology Dr, Arundel, QLD 4126
• Designed for BOLT THROUGH applications in beams and mullions thicker than 15mm.
• Ideal for thin walled RHS/ SHS box sections.• Suitable for steel supported glass facades,
floors or overhead glazing.• A4-70, M10 all thread can be supplied on
request
2 ARM 90° SUIT RHS/SHS BOX SECTIONS - NO THREAD LDF-2-90-N
2 ARM 90° SUIT GLASS OR STEEL FIN MEMBER - THREAD LDF-2-90-10/12/15T
• Designed for SIDE FIXED - BOLT THROUGH applications in glass or steel fins 10,12 & 15mm
• Can be adapted to suit thicker structural fins request..
• A4-70, M10 all thread and isolating nylon bushing supplied as standard
2 ARM 90° SUIT WALL SUBSTRATES - WALL FIX LDF-2-90-W
• Designed for SIDE FIXED - BOLT ON applications into supporting substrates.
• Suitable for concrete slabs, timber walls, drill and tapped steel sections
• A4-70, M10 x 100mm all thread supplied as standard. M10 timber lag screw and cut to length all thread can be supplied on request
See following page for technical drawing
LDF-2-90 Range
H29page
© Copyright 2018 This document & its contents including images, drawings & specification are the exclusive property of Fethers Glazing Systems Pty Ltd, & must not be copied or used directly or indirectly in any way. Unauthorised use may result in legal action.
97 Ricketts Rd, Mt Waverley, VIC 3149T.(03) 8562 0881 E [email protected]
13A Technology Dr, Arundel, QLD 4126
LDF-2-90 RangeLDF-2-90-N Variant
LDF-2-90-T Variant
LDF-2-90-W Variant
FRONT VIEWLEFT VIEW
56
140
36
TOP VIEWDETAIL A
A
40
98
1535
55
Handing convention: As viewed from building exterior
NONONONO1
3
EPDMgasket
4
Clampingplate
RHS post
127
63.5
63.5
FRONT VIEWLEFT VIEW
56
140
36
TOP VIEW
DETAIL A
A
40
T - Fin thickness
98
15
35
55
min. glass finthickness = 12mm
Handing convention: As viewed from building exterior
NONONONO
1
3
EPDMgasket
4
Clampingplate
127
63.5
63.5
FRONT VIEWLEFT VIEW
56
140
36
TOP VIEWDETAIL A
A
40
98
15
35
55
Handing convention: As viewed from building exterior
NONONONO1
3
EPDMgasket
4
Clampingplate
Non cracked concreteMin. 32MPa
127
63.5
Rod length required = <substrate thickness> +20 +/- 2
H30page
© Copyright 2018 This document & its contents including images, drawings & specification are the exclusive property of Fethers Glazing Systems Pty Ltd, & must not be copied or used directly or indirectly in any way. Unauthorised use may result in legal action.
97 Ricketts Rd, Mt Waverley, VIC 3149T.(03) 8562 0881 E [email protected]
13A Technology Dr, Arundel, QLD 4126
See following page for technical drawing
LDF-2-180-N
LDF-2-180-T
2 ARM 180° SUIT RHS/SHS BOX SECTIONS - NO THREAD LDF-2-180-N
• Designed for BOLT THROUGH applications in beams and mullions thicker than 15mm.
• Ideal for thin walled RHS/ SHS box sections.• Suitable for steel supported glass facades,
floors or overhead glazing.• A4-70, M10 all thread can be supplied on
request
2 ARM 180° SUIT GLASS OR STEEL FIN MEMBER - THREAD LDF-2-180-10/12/15T
• Designed for SIDE FIXED - BOLT THROUGH applications in glass or steel fins 10,12 & 15mm
• Can be adapted to suit thicker structural fins request..
• A4-70, M10 all thread and isolating nylon bushing supplied as standard
97 Ricketts Rd, Mt Waverley, VIC 3149T.(03) 8562 0881 E [email protected]
H31page
© Copyright 2018 This document & its contents including images, drawings & specification are the exclusive property of Fethers Glazing Systems Pty Ltd, & must not be copied or used directly or indirectly in any way. Unauthorised use may result in legal action.
13A Technology Dr, Arundel, QLD 4126
LDF-2-180-N
LDF-2-180-N Variant
LDF-2-180-T Variant
LDF-2-180-T
FRONT VIEWLEFT VIEW
56
110
36
TOP VIEWDETAIL A
A
40
68
15
35
55
Handing convention: As viewed from building exterior
NONONONO1
3
EPDMgasket
4
Clampingplate
RHS post
56
FRONT VIEW RIGHT VIEW
56
110
36
TOP VIEW
DETAIL A
A
40
T - Fin thickness
68
15
35
55
min. glass finthickness = 12mm
Handing convention: As viewed from building exterior
NONONONO
1
4
EPDMgasket
3
Clampingplate
56
Rod length required = <substrate thickness> +20 +/- 2
H32page
© Copyright 2018 This document & its contents including images, drawings & specification are the exclusive property of Fethers Glazing Systems Pty Ltd, & must not be copied or used directly or indirectly in any way. Unauthorised use may result in legal action.
97 Ricketts Rd, Mt Waverley, VIC 3149T.(03) 8562 0881 E [email protected]
13A Technology Dr, Arundel, QLD 4126
See following page for technical drawing
LDF-4-N
LDF-4-T
4 ARM SUIT RHS/SHS BOX SECTIONS - NO THREAD LDF-4-N
• Designed for BOLT THROUGH applications in beams and mullions thicker than 15mm.
• Ideal for thin walled RHS/ SHS box sections.• Suitable for steel supported glass facades,
floors or overhead glazing.• A4-70, M10 all thread can be supplied on
request
4 ARM SUIT GLASS OR STEEL FIN MEMBER - THREAD LDF-4-10/12/15T
• Designed for SIDE FIXED - BOLT THROUGH applications in glass or steel fins 10,12 & 15mm
• Can be adapted to suit thicker structural fins request..
• A4-70, M10 all thread and isolating nylon bushing supplied as standard
97 Ricketts Rd, Mt Waverley, VIC 3149T.(03) 8562 0881 E [email protected]
H33page
© Copyright 2018 This document & its contents including images, drawings & specification are the exclusive property of Fethers Glazing Systems Pty Ltd, & must not be copied or used directly or indirectly in any way. Unauthorised use may result in legal action.
13A Technology Dr, Arundel, QLD 4126
LDF-4-N
LDF-4-N Variant
LDF-4-T Variant
LDF-4-T
FRONT VIEWLEFT VIEW
56
140
36
TOP VIEWDETAIL A
A
40
98
1535
55
Handing convention: As viewed from building exterior
NONONONO1
3
EPDMgasket
4
Clampingplate
RHS post
63.5
56
63.5
127
FRONT VIEW RIGHT VIEW
56
140
36
TOP VIEW
DETAIL A
A
40
T - Fin thickness
98
15
35
55
min. glass finthickness = 12mm
Handing convention: As viewed from building exterior
NONONONO
1
4
EPDMgasket
3
Clampingplate
63.5
56
63.5
127
Rod length required = <substrate thickness> +20 +/- 2
H34page
© Copyright 2018 This document & its contents including images, drawings & specification are the exclusive property of Fethers Glazing Systems Pty Ltd, & must not be copied or used directly or indirectly in any way. Unauthorised use may result in legal action.
97 Ricketts Rd, Mt Waverley, VIC 3149T.(03) 8562 0881 E [email protected]
13A Technology Dr, Arundel, QLD 4126
© Copyright 2018 This document & its contents including images, drawings & specification are the exclusive property of Fethers Glazing Systems Pty Ltd, & must not be copied or used directly or indirectly in any way. Unauthorised use may result in legal action.
Light Duty Post Fixed Range
Product Page Numbers
LDP-1 H35&36
LDP-1-45 H35&36
LDP-2-90 H37&38
LDP-2-180 H37&38
LDP-3 H39&40
LDP-4 H39&40
LDP-1-45LDP-1-45
LDP-1-45LDP-1-45
LDP-2-90
LDP-2-90LDP-2-90
LDP-2-180
LDP-1 LDP-1
LDP-2-90
LDP-4LDP-3
The Affix LDP Range of Spider Fittings are suitable for a variety of applications. Most commonly for bolting through steel sections or into concrete or timber.
Suitable for steel supported glass facades, floors and overhead glazing.
97 Ricketts Rd, Mt Waverley, VIC 3149T.(03) 8562 0881 E [email protected]
H35page
© Copyright 2018 This document & its contents including images, drawings & specification are the exclusive property of Fethers Glazing Systems Pty Ltd, & must not be copied or used directly or indirectly in any way. Unauthorised use may result in legal action.
13A Technology Dr, Arundel, QLD 4126
• Designed for FACE FIXED applications. • Ideal for bolting through steel sections or
bolting into concrete/timber.• Suitable for steel supported glass facades,
floors or overhead glazing.• A4-70, M10 x 110mm all thread, M10 hex
nuts and M10 wedge lock washers sup-plied as standard.
• M10 timber lag screw and cut to length M10 all thread can be supplied on request
1 ARM LIGHT DUTY POST FIXEDLDP-1
1 ARM 45° LIGHT DUTY POST FIXEDLDP-1-45
See following page for technical drawing
LDP-1 Range
• Designed for FACE FIXED applications. • Ideal for bolting through steel sections or
bolting into concrete/timber.• Suitable for steel supported glass facades,
floors or overhead glazing.• A4-70, M10 x 110mm all thread, M10 hex
nuts and M10 wedge lock washers sup-plied as standard.
• M10 timber lag screw and cut to length M10 all thread can be supplied on request
H36page
© Copyright 2018 This document & its contents including images, drawings & specification are the exclusive property of Fethers Glazing Systems Pty Ltd, & must not be copied or used directly or indirectly in any way. Unauthorised use may result in legal action.
97 Ricketts Rd, Mt Waverley, VIC 3149T.(03) 8562 0881 E [email protected]
13A Technology Dr, Arundel, QLD 4126
LDP-1 Range
LDP-1
LDP-1-45
70
35
40 10
93
22.8
LDP-1LDP-1LDP-1LDP-1
15
40 10
70
7093
22.8
LDP-1-45LDP-1-45LDP-1-45LDP-1-45
3515
97 Ricketts Rd, Mt Waverley, VIC 3149T.(03) 8562 0881 E [email protected]
H37page
© Copyright 2018 This document & its contents including images, drawings & specification are the exclusive property of Fethers Glazing Systems Pty Ltd, & must not be copied or used directly or indirectly in any way. Unauthorised use may result in legal action.
13A Technology Dr, Arundel, QLD 4126
• Designed for FACE FIXED applications. • Ideal for bolting through steel sections or
bolting into concrete/timber.• Suitable for steel supported glass facades,
floors or overhead glazing.• A4-70, M10 x 110mm all thread, M10 hex
nuts and M10 wedge lock washers sup-plied as standard.
• M10 timber lag screw and cut to length M10 all thread can be supplied on request
2 ARM 180° LIGHT DUTY POST FIXEDLDP-2-180
2 ARM 90° LIGHT DUTY POST FIXEDLDP-2-90
See following page for technical drawing
LDP-2 Range
• Designed for FACE FIXED applications. • Ideal for bolting through steel sections or
bolting into concrete/timber.• Suitable for steel supported glass facades,
floors or overhead glazing.• A4-70, M10 x 110mm all thread, M16 hex
nuts and M10 wedge lock washers sup-plied as standard.
• M10 timber lag screw and cut to length M10 all thread can be supplied on request
H38page
© Copyright 2018 This document & its contents including images, drawings & specification are the exclusive property of Fethers Glazing Systems Pty Ltd, & must not be copied or used directly or indirectly in any way. Unauthorised use may result in legal action.
97 Ricketts Rd, Mt Waverley, VIC 3149T.(03) 8562 0881 E [email protected]
13A Technology Dr, Arundel, QLD 4126
LDP-2 Range
LDP-2-180
LDP-2-90 140
7070
7040 10
93
22.8
LDP-2-90LDP-2-90LDP-2-90LDP-2-90
3515
140
70 70
35
10
40
22.8
93
LDP-2-180LDP-2-180LDP-2-180LDP-2-180
15
97 Ricketts Rd, Mt Waverley, VIC 3149T.(03) 8562 0881 E [email protected]
H39page
© Copyright 2018 This document & its contents including images, drawings & specification are the exclusive property of Fethers Glazing Systems Pty Ltd, & must not be copied or used directly or indirectly in any way. Unauthorised use may result in legal action.
13A Technology Dr, Arundel, QLD 4126
• Designed for FACE FIXED applications. • Ideal for bolting through steel sections or
bolting into concrete/timber.• Suitable for steel supported glass facades,
floors or overhead glazing.• A4-70, M10 x 110mm all thread, M10 hex
nuts and M10 wedge lock washers sup-plied as standard.
• M10 timber lag screw and cut to length M10 all thread can be supplied on request
3 ARM LIGHT DUTY POST FIXEDLDP-3
4 ARM LIGHT DUTY POST FIXEDLDP-4
See following page for technical drawing
LDP-3
• Designed for FACE FIXED applications. • Ideal for bolting through steel sections or
bolting into concrete/timber.• Suitable for steel supported glass facades,
floors or overhead glazing.• A4-70, M10 x 110mm all thread, M10 hex
nuts and M10 wedge lock washers sup-plied as standard.
• M10 timber lag screw and cut to length M10 all thread can be supplied on request
LDP-4
H40page
© Copyright 2018 This document & its contents including images, drawings & specification are the exclusive property of Fethers Glazing Systems Pty Ltd, & must not be copied or used directly or indirectly in any way. Unauthorised use may result in legal action.
97 Ricketts Rd, Mt Waverley, VIC 3149T.(03) 8562 0881 E [email protected]
13A Technology Dr, Arundel, QLD 4126
LDP-3
LDP-3
LDP-4
LDP-4
140
70 70
7070
140
4093
10 22.8
LDP-3LDP-3LDP-3LDP-3
35
15
140
140
7070
70 70
40 10 22.8
93
LDP-4LDP-4LDP-4LDP-4
3515
13A Technology Dr, Arundel, QLD 4126
i1page
© Copyright 2018 This document & its contents including images, drawings & specification are the exclusive property of Fethers Glazing Systems Pty Ltd, & must not be copied or used directly or indirectly in any way. Unauthorised use may result in legal action.
GF10A GF10B
GF10C GF10D
Ø38mm fixed type glass fittingAFFIX Glass Fitting
Technical features• Ø38mm x M10 Fixed Type• Ø16mm Straight hole• 316 Marine Grade Stainless Steel
Ø50mm fixed type glass fittingAFFIX Glass Fitting
Technical features• Ø50mm x M10 Fixed Type• Ø20/ Ø30mm Countersink hole• 316 Marine Grade Stainless Steel
Ø50mm fixed type glass fittingAFFIX Glass Fitting
Technical features• Ø50mm x M10 Articulated wType• Ø28mm straight hole• 316 Marine Grade Stainless Steel
Ø50mm fixed type glass fittingAFFIX Glass Fitting
Technical features• Ø50mm x M10 Fixed Type• Ø20 straight hole• 316 Marine Grade Stainless Steel
Suitable for• Balustrades upto 13.52mm thick-
nessFinish• Brushed Satin Stainless #4 (SSS)• Mirrored Polished Stainless#8 (PSS)
Standard interlay thickness of 1.52mm
Suitable for• Frameless glass applications up to
21.52mm thickness• NOT TO BE USED in overhead
glazing and external balustrade applications
Finish• Brushed Satin Stainless #4 (SSS)• Mirrored Polished Stainless#8 (PSS)
Standard interlay thickness of 1.52mm
Suitable for• Frameless glass applications up to
21.52mm thickness• NOT TO BE USED in overhead
glazing and external balustrade applications
Finish• Brushed Satin Stainless #4 (SSS)• Mirrored Polished Stainless#8 (PSS)
Standard interlay thickness of 1.52mm
Suitable for• Frameless glass applications up to
21.52mm thicknessFinish• Brushed Satin Stainless #4 (SSS)• Mirrored Polished Stainless#8 (PSS)
Standard interlay thickness of 1.52mm
Product CodesAFX GF10A Suitable for 10T, 10TL, 12T, 12TL glass
Specify at time of orderFinish
Product CodesAFX GF10B-10 Suitable for 10T glassAFX GF10B-12 Suitable for 12T glassAFX GF10B-15 Suitable for 15T & 16TL glassAFX GF10B-19 Suitable for 19T & 20TL glass
Specify at time of orderGlass ThicknessFinish
Product CodesAFX GF10D-10 Suitable for 10T glassAFX GF10D-12 Suitable for 12T glassAFX GF10D-15 Suitable for 15T & 16TL glassAFX GF10D-19 Suitable for 19T & 20TL glass
Specify at time of orderGlass ThicknessFinish
Product CodesAFX GF10C-10 Suitable for 10T & 10TL glassAFX GF10C-12 Suitable for 12T & 12 TL glassAFX GF10C-15 Suitable for 15T & 16TL glassAFX GF10C-19 Suitable for 19T & 20TL glass
Specify at time of orderGlass ThicknessFinish
97 Ricketts Rd, Mt Waverley, VIC 3149T.(03) 8562 0881 E [email protected]
© Copyright 2018 This document & its contents including images, drawings & specification are the exclusive property of Fethers Glazing Systems Pty Ltd, & must not be copied or used directly or indirectly in any way. Unauthorised use may result in legal action.
97 Ricketts Rd, Mt Waverley, VIC 3149T.(03) 8562 0881 E [email protected]
13A Technology Dr, Arundel, QLD 4126
i2page
© Copyright 2018 This document & its contents including images, drawings & specification are the exclusive property of Fethers Glazing Systems Pty Ltd, & must not be copied or used directly or indirectly in any way. Unauthorised use may result in legal action.
GFR14A GFR14B
GFR14C GFR14D
Ø60mm articulated type CSK glass fittingAFFIX Glass Fitting
Technical features• Ø60mm x M14 Articulated Type• Ø34/ Ø40mm Countersink hole• 316 Marine Grade Stainless Steel
Ø60mm articulated type CSK glass fittingAFFIX Glass Fitting
Technical features• Ø60mm x M14 Articulated Type• Ø34/ Ø40mm/ Ø36 mm Countersink hole
Ø60mm articulated type glass fittingAFFIX Glass Fitting
Technical features• Ø60mm x M14 Articulated Type• Ø32/ Ø36mm Countersink hole• 316 Marine Grade Stainless Steel
Ø60mm articulated type glass fittingAFFIX Glass Fitting
Technical features• Ø60mm x M14 Articulated Type• Ø32mm Straight hole• 316 Marine Grade Stainless Steel
Product CodesAFX GF14A Suitable for 12T, 15T, 16TL, 19T, 20TL glass
Specify at time of orderFinish
Product CodesAFX GF14C Suitable for 12mm to 44mm thick glass
Compatible AccessoriesZ-STR-162 12mm Air Space DonutZ-STR-163 14mm Air Space Donut
Specify at time of orderFinishGlass Makeup and thickness
Product CodesAFX GF14D Suitable for 10mm to 44mm thick glass
Compatible AccessoriesZ-STR-162 12mm Air Space DonutZ-STR-163 14mm Air Space Donut
Specify at time of orderFinishGlass Makeup and thickness
Product Codes AFX G14B Suitable for 10T, 10TL, 12T, 12TL, 15T, 16TL, 19T, 20TL glass
Specify at time of orderFinish
Suitable for• Frameless glass applications up to
21.52mm thickness• NOT TO BE USED in overhead
glazing and external balustrade applications
Finish• Brushed Satin Stainless #4 (SSS)• Mirrored Polished Stainless#8 (PSS)
Standard interlay thickness of 1.52mm
Suitable for• Frameless glass applications up to
44mm thickness• Designed for Multi-Laminate
applications• Designed for Insulated Glass Units/
Double Glazed Units• NOT TO BE USED in overhead
glazing and external balustrade applications
Finish• Brushed Satin Stainless #4 (SSS)• Mirror Polished Stainless #8 (PSS)
Suitable for• Frameless glass applications up to
44mm thickness• Designed for Multi-Laminate
applications• Designed for Insulated Glass Units/
Double Glazed UnitsFinish• Brushed Satin Stainless #4 (SSS)• Mirror Polished Stainless #8 (PSS)
Suitable for• Frameless glass applications up to
21.52mm thicknessFinish• Brushed Satin Stainless #4 (SSS)• Mirrored Polished Stainless#8 (PSS)
Standard interlay thickness of 1.52mm