fgps / fgpe1000 gpm n = 3000 min-1 fgps 100-250 dn 150/100 gpm 0 200 400 600 800 1000 1200 1400 1600...
TRANSCRIPT
FIRE PUMPS
UL 448
FGPS/FGPE 00 07-12 EN
FGPS / FGPE
General Information
UL (Underwriters Laboratories Inc.) is a global independent safety science company offering expertise across five key strategicbusinesses: Product Safety, Environment, Life & Health, University and Verification Services. Since the year UL founded in 1894,nearly 70,000 manufacturers in 100 countries have produced 20.000 different types of totally 20 billion UL Marked products.
UL engineers scientifically investigate and test thousands of types of products, materials, constructions and systems to evaluatethe electrical, fire and injury risks; the burglary or fire resistance; or the ability to detect, control or limit fires.
UL has developed 1,200 Standards for Safety, which serve as the bedrock of compliance in over 200 industries.
There is an “Online Certifications Directory” in UL’s website and all the products listed by UL can be found here.
The requirements of this standard cover design and test features of centrifugal fire pumps intended for use in water-supplysystems for fire-protection service.
The pumps covered by these requirements are intended for installation and use in accordance with the Standard for theInstallation of Stationary Pumps for Fire Protection, NFPA 20.
Who UL is and What UL does:
UL Safety Standard: UL 448
Design Features according to UL:
Only the specified capacities in the below table are allowed for rated capacity. For capacities higher than 5000 GPM, 500 GPMincrements are allowed.
All interior bolt or screw that are exposed to pumped liquid shall be of rolled bronze or corrosion resistant material
The pump shall be provided with automatic air-release valve, circulation relief valve and pressure gauges
Bearings shall have an L-10 rating of not less than 5000 hours at maximum load.
The pumps shall be provided with at least four packing rings plus a lantern ring. The lantern ring may be permitted to replaceone ring of packing.
Impellers, wear rings, shafts, lantern rings, glands shall be made of corrosion resistant material.
Following material specifications are applied to FIRE GUARD UL fire pumps:
Casing
Impeller
Shaft
Shaft sleeve
Nodular cast iron
Cast bronze
Stainless steel
Stainless steel
GGG 40 (GJS-400-15)
G-CuSn 10
X20 Cr 13
X5 Cr Ni Mo 17-12-2
0.7040
2.1050.01
1.4021
1.4401
A 536 Gr. 60-40-18
B 584 C 90700
A 276 Type 420
A 276 Type 316
Part List Definition DIN 17007 EN-DIN ASTM
GPM
25
50
100
150
200
250
300
m³/h
5.68
11.3
22.7
34.0
45.4
56.8
68.1
GPM
400
450
500
750
1000
1250
1500
m³/h
90.8
102.2
113.5
170
227
284
341
GPM
2000
2500
3000
3500
4000
4500
5000
m³/h
454
568
681
795
909
1022
1136
200 GPMn = 3000 min -1
FGPE 50-250DN 80/50
300 GPMn = 3000 min -1
FGPE 50-250DN 80/50
250 GPMn = 3000 min -1
FGPE 50-250DN 80/50
300 GPMn = 3000 min -1
FGPE 65-250DN 100/65
GPM
160
140
120
100
0,0 100,0 200,0 300,0 400,0 500,0 600,0
ø264
ø245
ø210
80
60
40
20
0
120
100
80
60
40
20
0
%50 %55 %50 %65 %70
60
50
40
30
20
10
0
50
40
30
20
10
0
ø264
ø245
ø210
3024181260
1086420
ø264
1501257550250 100Q - (Capacity) - (m³/h)
GPM
160
140
120
100
Q - (Capacity) - (m³/h)
1086420
3024181260
1501257550250 100
ø264
50
40
30
20
10
0
60
50
40
30
20
10
0
ø264
ø245
ø210
0,0 100,0 200,0 300,0 400,0 500,0 600,0120
100
80
60
40
20
0
80
60
40
20
0
ø264
ø245
ø210
%50 %55 %50 %65%70
%74,0
%73,0
%71,0
GPM
Q - (Capacity) - (m³/h)50
40
30
20
10
0
60
50
40
30
20
10
0
ø264
ø245
ø210
0
1086420
3024181260
ø264
0 100 200 300 400 500 600120
100
80
60
40
20
0
160
140
120
100
80
60
40
20
0
%50 %55 %50 %65ø264
ø245
ø210
%70
Q - (Capacity) - (m³/h)
160
140
120
100
1086420
2001257550250 100 175150
3024181260
ø264
60
50
40
20
10
0
30
80
50403020100
7060ø264
ø245
ø220
0 100 200 300 400 500 600 700 800120
100
80
60
40
20
0
80
60
40
20
0
ø264
ø245
ø220
%55 %60 %65 %70%75
GPM
150125755025 100
Performance Curves
450 GPMn = 3000 min -1
FGPE 65-250DN 100/65
450 GPMn = 3000 min -1
FGPE 80-250DN 125/80 500 GPM
n = 3000 min -1FGPE 80-250
DN 125/80
400 GPMn = 3000 min -1
FGPE 65-250DN 100/65
Q - (Capacity) - (m³/h)
3024181260
200500 100 15025 75 125 175
1086420
ø264
80
50403020100
607050
40
30
20
10
0
60
ø264
ø245
ø220
160
140
120
100
80
60
40
20
0
120
100
80
60
40
20
0
ø264
ø245
ø220
%60 %65 %70%75
%77,0
%76,0
%74,0
0 100GPM
200 300 400 500 600 700 800
160
140
120
100
ø264ø245
ø210
50403020100
607080
100
80
60
40
20
0
GPM
Q - (Capacity) - (m³/h)
120
100
80
60
40
20
0
80
60
40
20
0
0 200 600 800 1000 1200400
ø264
ø245
ø210
%60 %65 %70 %75
864
20
24181260
200500 100 150 250 300
ø264
Q - (Capacity) - (m³/h)
GPM
5040302010
0
100
80
60
40
20
0
607080
ø264ø245
ø210
86420
24181260
200500 100 150 250 300
ø264
120
100
80
60
40
20
0
160
140
120
100
80
60
40
20
0
0 200 600 800 1000 1200400
%60 %65 %70 %75ø264
ø245
ø210
80
50403020100
607050
40
30
20
10
0
60
GPM
Q - (Capacity) - (m³/h)
160
140
120
100
80
60
40
20
0
120
100
80
60
40
20
0
0 100 200 300 400 500 600 700 800
ø264
ø245
ø220
%60 %65 %70 %75%77,0
%76,0
%74,0
3024181260
1086420
200500 100
ø264
150
ø264
ø245
ø220
Performance Curves
1000 GPMn = 3000 min -1
FGPS 100-250DN 150/100
GPM0 200 400 600 800 1000 1200 1400 1600
140
120
100
80
60
40
20
0 0
20
40
60
80
100
120
140
160
180
6
4
2
00 50 100 150 200 250 300 350 400
Q - (Capacity) - (m³/h)
0
12
48
16
020406080100120140160
0
40
80
120
160
200
750 GPMn = 3000 min -1
FGPS 100-250DN 150/100
GPM
1250 GPMn = 3000 min -1
FGPS 125-315DN 200/125
GPM
1500 GPMn = 3000 min -1
FGPS 125-315DN 200/125
GPM
ø220
ø294 %55 %60 %65 %70
ø260
ø294
ø294
ø260
ø220
ø220
ø294 %55 %60 %65 %70
ø260
ø294
ø260
ø220
ø294
0 200 400 600 800 1000 1200 1400 1600140
120
100
80
60
40
20
06
4
2
0
020406080100120140160
0 50 100 150 200 250 300 350 400Q - (Capacity) - (m³/h)
12
48
16
0
20
40
60
80
100
120
140
160
180
0
40
80
120
160
200
0
0
10
2468
3024181260
0 100 200 300 400 500 600 700
ø320
0
50
100
150
200
250
300360
300
240
180
120
60
0
ø320
ø290
ø250
100
120
140
160
20
0
40
60
80
0 400 800 1200 1600 2000 2400 2800
220
200
180
160
140
120
100
80
60
40
20
0
ø250
ø290
ø320
3000
3000
3000
%75%70%60 %65%55
Q - (Capacity) - (m³/h)
0
10
2468
3024181260
0 100 200 300 400 500 600 700
ø320
0
50
100
150
200
250
300360
300
240
180
120
60
0
ø320
ø290
ø250
220
200
180
160
140
120
100
100
120
140
160
20
0
40
60
80
0 400 800 1200 1600 2000 2400 2800
80
60
40
20
0
ø250
ø290
ø320%75%70%60 %65%55
Q - (Capacity) - (m³/h)
Performance Curves
Selection Table
Selection Table
Sectional Drawings
Right reserved to change without notice.No responsibility is accepted because of printing errors.
2nd Floor, 145-157 St John streetLondon EC1V 4PYUnited Kingsdom
Pbx: + 44 (0) 845 075 1042Fax: + 44 (0) 845 299 1039
Fireguard Safety Equipment Co Ltd.
www.fireguard-uk.com / e-mail: [email protected]
001003010020021030031034035042044050060065070088200210211212230301320321322323400405410411420
Volute CasingStuffing BoxSupport FootWear Ring (back)Wear Ring (front)Bearing HousingBearing Bracket LanternBearing Cover (outboard)Bearing Cover (inboard)Stuffing Box GlandLantern RingImpellerShaftImpeller NutShaft Protecting SleeveThrowerBall BearingImpeller KeyCoupling KeySleeve KeyDrain PlugStud+Nut+WasherHex. Head BoltHex. Head BoltHex. Head BoltHex. Head BoltStuffing Box PackingSet ScrewGasketGasketO-Ring
PartNumber
Part Name
FPGE 50-250 , FPGE 65-250 , FPGE 80-250
FPGS 100-250 , FPGS 125-315
003003A013014020030034
034A035
035A042044050060070071088200210211212220231270271300320350360390391392400411420421430500501
PartNumber Part Name
Stuffing Box (right side)Stuffing Box (left side)Volute Casing (top)Volute Casing (bottom)Wear RingBearing HousingBearing Cover (inboard)Bearing Cover (inboard)Bearing Cover (outboard)Bearing Cover (outboard)Stuffing Box GlandLantern RingImpellerShaftShaft Protecting SleeveSleeve (spacer)ThrowerBall BearingImpeller KeyCoupling KeyKeyOil SealDrain PlugNippleGrease NippleStudHex.Head BoltAllen ScrewNutLocknut (non drive end)Locknut (drive end)Lock WasherStuffing Box PackingGasketO-RingO-RingPinValveFlushing Pipe
042 044 400 070 020 210 050 270 071 034 271 035
060
035A
500 003 300 421 030 200
430
420 350 390
211
391 392
014
088
212
220360 320
034A
003A
013
411
231
501
044 060
050
210
200420
211
320
400 042
021
230
030
010
322
065
031
035
323
321
301
034
405
001
088003
020
411
212
410
070