ferri hydraulic reach mowers t460
DESCRIPTION
Hydraulic reach mowers for grass, shrubs, bushes, sticks, wood (max. cutting width: Ø 3 cm).TRANSCRIPT
GROUP A
HYDRAULIC REACH MOWERS
Floating head system
Mechanical breakaway(arm protection in case of
obstacles)
Cast iron hydraulic rotor pump group 3
Cable controlsThe polypropylene oil tank is separated from the frame and allows it to be isolated from any structural stress. Fully recyclable.
Developed in collaboration with:
HP Tractor 50 60 Min. tractor weightKg
Min. tractor widthm
T460 Smart 2200 1,80
Working positions (m)
T460 Smart
A m 4,56
B m 3,05
C m 1,15
D m 2,66
E m 4,91
F m 0,95
G m 1,65
H m 4,16
I m 0,22
HP 29 available to the rotorHP 32 max to hydraulic motor
T460
Polypropylene oil tank
Group 3 cast iron hydraulic rotor pump
Inner lining
Reversiblerotor by cable
Adjustablerear roller
Mechanical breakaway
Two independenthydraulic systems
F
E
D
C
G
B
A
H
FERRI srl - Via Govoni, 30 - 44034 Tamara (FE) Italy - Tel. +39 0532 866866 - Fax +39 0532 866851 - [email protected] - www.ferrisrl.itSpare parts: Tel: +39 0532 866993 - Fax: +39 0532 867061 - e-mail: [email protected] Sales Service: Tel: +39 0532 866991 - Fax: +39 0532 866851 - e-mail: [email protected]
Equipped with:
IT IS RECOMMENDED that the connection between tractor and shredder and its setting up should be made with the Dealer according the instructionsand warnings listed on our Use and Maintenance Manual. For further information please contact our after sales service.
� Flail Head
� FLOATING head system
� Totally independent hydraulic system
� Cast iron hydraulic rotor pump group 3
� Cast iron motor (TID)
� Mechanical breakaway (arm protection in case of obstacles)
� Reversible rotor by cable
� Front guard with flaps and rear abrasion resistant guard (TID)
� Oil and Pto shaft
Technical dataModel Max horizontal
reach*Weight Oil Rotor Pto Flail head
angle
m Kg l Rpm MAX Rpm
T460 Smart 4,56 568 120 3.100 540 190°
* Reach measured from tractor centre line to head edge.
Machines with cable controls “Classic”Model
T460 Smart with flail head TID100 m 1,00
Warning
Flails TID100 Interchangeable on the same rotor
Multi-use and straight blades for:grass, shrubs, bushes, sticks, woodØ max 3 cm
Articulated “Y“ flails for:grass and bushesØ max 2 cm
Bootie blades for:grass, hedges, bushesØ max 2 cm
Cod. 0901158 + Cod. 0901159 Cod. 0901049 Cod. 0901138
n° 36+18 n° 36 n° 18
Standard
Flail head TID100
Width (m) 1,00Rotor speed (rpm) 3000Blade tip speed (m/sec) 60Flail head angle 190°Weight (Kg) 129
TID100Direct drive
new
Completing equipment to the base machine at extra chargeWARNING: due to the high offset loads on the linkages it is necessary to fit two stabilizers
Code Lenght cm
TST5017 (640-890) Stabilizers to the tractor
0PT001121000 “Delta yoke” for stabilizers
TGA4611 (640-890) Stabilizers for “Delta yoke”
TGA5014 (340-460) Top link stabilizer
OptionCode
TM46002 Oil cooler with thermostat
TM46003 Lift float (LFA mechanic)
TM46008 Bumpers with illumination system