femme fatale16 - universo sniper airsoft · femme fatale16 femme fatale15 open the cover of...
TRANSCRIPT
Automatic firingSingle shot
1.Push the butt plate lock ( both sides ) 2.Pull out the butt plate.
1.Charge up the battery. 2.Charging will be completed after 3 hours.
Take off the cover. Pull out the wire connector.
Connect battery plug with the connector.1.Pull the slip ring and hold.2.Disassemble the lower handguard.
1.Pull the slip ring and hold.2.Reinstall the lower handguard.
Finish.
Connect battery plug with the connector until you heard a click sound.
Insert the battery into stock. Reinstall the battery cover and butt plate.
Please select quality battery with the CE approval, to avoid any unnecessary damage on the product.Please use either 8.4V or 9.6V battery, if different voltage used, it might damage the product.Remove the battery from the product when it is not in use.Do not wet nor incinerate the battery, nor to deform the terminal.
1.
2.
3.4.
Do not catch your fingers in the dummy bolt.Never hold the gun sideways as the BB pellets will curve right or left.
It is strongly recommended the use of G&G BB pellets only. Using low quality BB pellets will shorten product life span and void product warranty.
Safety On Semi Auto Full AutoThe trigger cannot be pulled
Front sight
Rail system
Detachable rear sight
Extend battery stock
Stock release lever
Reinforced Grip
TriggerSelector lever
Flash suppressor
Outer barrel
Hi-cap 450R magazine
Slip ring
G-11-019NI-MH 9.6V 1400 mAh
Detachable carrying handle Charging handle
6-PositionRetractable stock
Femme Fatale16
Femme Fatale15
Open the cover of magazine. Load G&G 5.95mm BB pellets into the magazine.
Close the cover plate then turn the gear until the sound changes.
Insert the magazine until you heard a click sound.
COMPONENTS
FIRING MODE & SAFETY
BATTERY SETTING
SETTING MAGAZINE
HOP-UP ADJUSTMENT
RECOMMENDEDBATTERY TYPE
FF15BATTERYSETTING
FF16BATTERYSETTING
Best Position.
Too much Hop-up.(Turn the adjust lever toward Normal)
Not enough Hop-up.(Turn the adjust lever toward Hop)or Too much Hop-up.(Turn the adjust lever toward Normal)
Click
Click
Click
Turn to Normal Turn to Hop
WWW.GUAY2.COM Manufactured by G&G Armament Printed in Taiwan
4 2
3
1
FF15- 01FF15- 02FF15- 03FF15- 04FF15- 05FF15- 07FF15- 08FF15- 09FF15- 10FF15- 11FF15- 12FF15- 13FF15- 14FF15- 15FF15- 16
FF15- 17FF15- 18FF15- 19FF15- 20FF15- 21FF15- 22FF15- 23FF15- 24FF15- 25FF15- 26FF15- 27FF15- 28FF15- 29FF15- 30
Flash hider setRail system setRear sight base setRear sight setFront barrel setBarrel base setPiston rodAssist knob setInner barrelUpper receiver setCharging handle setHop up setPort cover setFront frame lock pin setBolt catch set
Magazine catch setSelector lever setStock washerEnhanced rod setHi-cap 450r magazineLower receiver setTrigger guard setSelector plateRear frame lock pin setGripMotor setGrip bottom setExtended stock setRear wire set
FF16- 06FF16- 31FF16- 32FF16- 33
FF16- 34FF16- 35FF16- 36
Outer barrel setGear box setCarrying handle setRear outer barrel set
Front outer barrel setHandguard setRetractable stock set
886-4-757-7000
886-4-757-8000
1F,NO.552,Hegang Rd,Hemei Township,Changhua County 50844,TAIWAN
For FF15 / FF16
For FF16
1
2
1
2
1
23
1
2
2
34
1
2
3
1
2
12
1
2
3
12 3
4
5
678
91011
12
13
14
15
16
1
2
2
3
3
4
4
5
5
6
6
12
2
3
4
56
1
7
1
2
3
4567
7
8 89
10
3
31
1
23
4
5
67
1
1
2
3
5
1
1
2 3
22 3
3
4
1
21
2 3
4
1
23
12
34
5
11 123
4
56
78
91012131415
16
FF15- 01
FF15- 02
FF15- 03
FF15- 11
FF15- 16
FF15- 22
FF15- 29 FF15- 30
FF15- 17
FF15- 18
FF15- 19
FF15- 05
FF15- 08
FF16- 06
FF16- 31
FF16- 32
FF15- 04
FF15- 07
FF15- 09
FF15- 12
FF15- 20
FF15- 10
FF15- 13
FF15- 14
FF15- 15
FF15- 23
FF15- 24
FF15- 25
FF15- 26
FF15- 27
FF15- 28
FF15- 21
12
3
4
5
11
2
2
2
34
5
FF16- 33
FF16- 36
FF16- 34
FF16- 35
► You may purchase all of the groups’ parts from G&G support Dep.
► E-Mail: support@guay2com
Keep the selector on Safe modeuntil you are actually ready to shoot.
Special ShootingUsed for precision firing.
Common ShootingUsed for full automatic firing.
Windage knob (left / right adjustment)Elevation knob (up / down adjustment)
WindageWindage
ElevationElevation
REAR SIGHT ADJUSTMENT
MAINTENANCE
TROUBLE SHOOTINGPARTS LIST
RETRACTABLESTOCK
FF15
Press the stock release lever to unlock. Adjust the position ( 6 position ).
Press the stock release lever to unlock. Adjust the position ( 6 position ).
MOVABLEPARTS
RETRACTABLESTOCK
FF16
MOVABLEPARTS
Detachable rear sight. Turn the knobs counterclockwise to disassemble the rear sight.
Take off the rear sight to install other accessories.
Detachable carrying handle. Turn the knobs counterclockwise to disassemble the carrying handle.
Take off the carrying handle to install other accessories.
Remove the magazine. Return the hop up dial to normal position and insert the cleaning rod from the lead edge of the inner barrel.
Be aware to have the rod facing down and reaching to the end, and remove clogged pellets.
The screw at bottom of the grip. Please use the screwdriver to adjust.
Check the wire set contact with motor. Check the battery and connector.
Adjust screw when the gear noise becomes shrilly.
No operation No operation
WWW.GUAY2.COM Manufactured by G&G Armament Printed in Taiwan