feeler fmh 500 horizontal milling machine

Feeler UK-Rhodes House-Northfield Road-Southam-Warwickshire CV47 0FG

Phone: 01926 818 418 / Fax: 01926 818 414 / email: sales@feeler uk

Feeler UK Ltd

a member of the

FMH500 Horizontal Machining Centre

Outstanding Quality Horizontal Machining Centre

Rapid feed rate 60M/min X/Y/Z axes

B axis 0.001 degree rotary table with direct drive motor

50 Bar coolant thru spindle/12,000 rpm spindle

Integrated hydraulics for power clamping

UK


Phone: 01926 818 418 / Fax: 01926 818 414 / email: sales@feeler uk.com 2

Introduction

Engineering Technology Group Background

The Engineering Technology Group was formed in April 2005 and brought together five complimentary businesses. Being privately owned and having 50 employees.

The Group comprises of the following companies –

Chiron Werke

Exclusive UK distributor of Chiron, high speed, high technology machining centres.

Turning Technologies

Exclusive UK distributor of Nakamura-Tome, high speed, high technology, twin spindle turning centres.

Hyfore Engineering

Manufacturer of bespoke manual, hydraulic or pneumatic jigs and fixtures.

Handtmann

Exclusive UK distributor of the Handtmann range of large high performance multi axis machining centres.

Feeler UK

Exclusive UK distributor of the extensive Feeler range of CNC machine tools.

Why the Group was formed?

Small niche distributors lack the resources necessary to meet industry challenges. While having the in-depth expertise the ability to manage large Turnkey projects is naturally limited.

Conversely large companies with a broad product portfolio do not have the in-depth expertise and suffer from increased demands for standard products and the need to maintain a fast stock turnaround.

By pooling our resources the in-depth expertise from the factory trained applications engineers is enhanced and along side the factory trained service engineers the ability to provide highly innovative, precise turnkey projects is satisfied.

All Feeler machine tool products are robust, reliable and represent outstanding value.

UK



Machine construction utilises high quality Japanese and German mechanical components, and CNC control system options include industry proven Fanuc, Heidenhain or Siemens.

FMH-500

120 °°°° swiveled control Panel

Spindle speed

12,000rpm with

oil cooler

Rear coolant and flushing devices add efficiency in wash-down.

CTS filter system (OPT)

Rear-window formaintenance

3-axis travel 60m/min(OPT)

Coolant through ball screw on 3 axes (OPT)

Torque MotorB-axis(OPT)

NC4 Tool measurement(OPT)

UK



UK



Model FMH500 (twin pallet) Horizontal Machining Centre with Fanuc 18iMB control Specification

o Spindle speed 12,000rpm with oil cooler

o Oi/lAir spindle lubrication system

o Travel: 762mm(X), 710mm(Y), 710mm(Z)

o Tool magazine: 60 tools arm type ATC

o Program storage: 640M for Fanuc 18i

o Spindle taper shank: 7/24 taper No.40

o Rapid feedrate X/Y/Z axes: 60M/min. (linear guide)

o Automatic lubrication system (for slide way & ball screw)

o Spindle air blast

o Pretensioned ballscrew on X/Y/Z axes

o AC spindle motor for headstock:

o Fanuc: αB112L, 15kw / 22kw builtin spindle motor AC servo motor:

o Fanuc: α22, 4.3kw for X/Z axes; α30B, 4.3kw for Y axis, B axis with D.D. Motor

o Coolant pump, GRUNDFOS, CH430(50HZ), 0.86KW=1.15HP

o AirBlow cleaning system for table indexing taper cones

o Door interlock

o Synchronous tapping cycle

o Drum type Chip conveyor and screw remover & chip bucket

o Rotary type automatic pallet changer

o B axis 0.001 degree rotary table w/ DDM (direct drive motor)

o Heat exchanger for electric cabinet

o Full enclosed splash guard

o One set of instruction manual (service manual, wiring diagram and parts list)

o Standard colour as per our catalogue

o Coolant through spindle interface

o Coolant through spindle with filter system 50bar

o T slot table

o Oil skimmer

o Mist collector

o Auto power off

o Air conditioned electrical cabinet

o Transformer for 415V 50HZ, 3PH

o CE modifications

o Hydraulic interface 210 bar 4 lines: (2in/2out) for power clamping

o 4 x Independent air lines (2 lines for each pallet for component part sensing)

Package will Include

Delivery, offloading, positioning, full Installation and commissioning 2

UK



Days Programmer and Operator Training Package

Validity

This offer is valid for a period of 30 days from the date of the proposal and is based upon a forward exchange

rate of:1.55US$ = £1 GBP

10% of the initial deposit payment will be used to fix the exchange rate and therefore a fixed Sterling price will

be guaranteed from the date the deposit is received in our account.

All prices quoted are subject to Value Added Tax at the standard rate.

Delivery Terms

Delivered to your UK works subject to the Terms and Conditions detailed below.

Unloading, Positioning and Insurance Responsibility

Where a machine can be offloaded using integral cranage equipment fitted to the transport vehicle and easily

skated to its site position, no additional charge will be made for the lifting equipment or positioning to site.

Any additional handling equipment required will be at the customer's expense.

Feeler UK will insure the equipment in transit only.

The unloading, lifting and positioning of the equipment from transport provided by Feeler UK to its final

position on the customer site is at the customer’s risk, and should be insured accordingly.

Installation and Commissioning Responsibilities

o The connection of pressurised air and electrical power supply to the machine from an isolator not more than Three metres from the installation point is the responsibility of the Customer.

o The customer will supply all glands, cabling and isolators. The machine must not be powered up until a Feeler UK engineer is present.

o All pressurised air supplies must be clean, dry and of adequate volume. Feeler UK can supply air dryers and receivers, if required, at an additional cost.

o The preparation and supply of adequate foundations and services is the responsibility of the customer.

o Feeler UK if requested can provide full documentation for all services and foundations.

o Failure to comply with the installation foundation or service requirements may result in the invalidation of the general warranty.

Warranty (Notes for Guidance Only)

The machine that is detailed within this Sales Offer is covered by a warranty subject to the limitations set out in

conditions 7, 12 and 13 of Feeler UK’s terms and conditions of Sale (UK Sales). In the event that the

equipment I is found to be defective under normal operating conditions any claim shall be notified in

accordance with the warranty requirements.

It is a condition of the Warranty Terms that items replaced under warranty are the property of Feeler UK, and

must be returned.

It will be noted on the Feeler UK service reports if parts replaced under Warranty are taken by the Engineer or

left for return by the Customer.

It is the Customer’s responsibility to ensure that replaced parts are returned to Feeler UK. Any parts misplaced

or disposed of and not returned to Feeler UK will be charged at the current rate for the new component.

Initial Warranty Term

The initial warranty term for this machine is 12 months or, if shorter 4,000 operating hours, from delivery.

Extended 2 Year Warranty Term

Provided the Customer agrees to the terms of a standard Preventative Maintenance Agreement with Feeler

UK



UK to run concurrently with the entire term of the Initial and Extended Warranty, then included within this Sales

Order Confirmation is an Extended Warranty term up to 24 months or, if shorter 8,000 operating hours, from

delivery.

Terms of the Preventative Maintenance Agreement will be supplied by the Engineering Services Department

and must be signed by the Customer prior to the machine delivery.

Terms of Payment (Notes for Guidance Only)

Terms of payment are detailed in Clause 5 of Feeler UK’s Terms and Conditions of Sale (UK Sales) and are

generally as follows:

Deposit

A non-refundable deposit of 30% of the total Contract Price plus value added tax to be paid by the buyer upon

receipt of our invoice and Sales Order Confirmation.

The payment of a deposit is confirmation that the contract is entered solely on the terms of this "Sales Offer"

and Feeler UK’s Terms and Conditions of Sale.

Balance

The Buyer shall pay the balance of the Contract Price plus Value Added Tax as follows:

Either:

Where goods are financed through the Buyers own Banking Facilities:

65% of the total contract price plus value added tax to be paid prior to the goods being delivered to your

works,or tendered for delivery.

5% of the total contract price plus value added tax to be paid on the earlier of the date of the

Installation

Acceptance Certificate, or no later than 30 days after the date of delivery.

Or

Where the goods are financed through a third party Finance Company:

The full balance of the contract price plus value added tax to be paid prior to the goods being delivered

to your works, or tendered for delivery.

Training Course

The following training courses will be provided by Feeler UK free of charge, for a maximum of two people.

Course Venue/Duration

Programmer/Operator Course Customer Works 2 Days

The training course will be undertaken immediately following installation and commissioning of the machine,

providing all relevant payments have been made up to that time. All courses must be taken within 12

months of delivery.

UK



engineeringsolutions etg’s customer support Division

A team of experienced factory trained specialists

Supporting Feeler customers and machines in the field with

• Experience

• Knowledge

• Diagnostic skills & equipment

• A thorough understanding of Production Engineering

Engineering

• 24/7 Help Line

• Regionally Based Field Engineers with access to our centrally

held “live” technical information and machine histories

• “Meantime to back into production from call out” running at 0.89

days

• Wide range of machine care preventative maintenance & service

packages

• EPS Remote Diagnostics

• Parts holding in our Southam Technology centre

Comprehensive Range, Next day supply

Training

• On your site or at our Training facility in Southam

• Operator Training

• Maintenance Training

• Fanuc Siemens' & Heidenhain Programming Training

Applications

• Team of application engineers fluent in “Catia, Delcam, Espirit &

Varicut”

• From full turnkey solutions to advice and programming of specific

components

UK



Layout Drawing

UK



engineering technology group

Feeler Machine Tools Division

Tapping Centers

VMC Integrated Pallet

Shuttle

VMC Linear & Box Way

Full Lathe Line

With Automation

HMC – 500 Double Column

Machines


Group structure


Exclusive UK distributor of high speed, high technology machining centres

Exclusive UK distributor of high speed, high technology, twin spindle turning centres

Workholding Solutions –Design & Manufacturer of bespoke manual, hydraulic, high pressure pneumatic jigs, and fixtures

Supplier of Gantry machines for the Aerospace and heavy engineering industries

Supplier of Vertical, Horizontal & Turning Machines for the medium and heavy engineering industries

FEELER UK

Rhodes House, Northfield Road, Southam, Warwickshire CV47 0FG

TEL: 01926 818 418 / FAX: 01926 818 414 / [email protected]

www.engtechgroup.com


feeler fmh 500 horizontal milling machine

Documents

feeler uk feeler uk

feeler machine tool

high speed

warwickshire cv47

fg phone

high quality japanese

twin spindle

indepth expertise