feedback line brochure 4.7.05
TRANSCRIPT
7/27/2019 Feedback Line Brochure 4.7.05
http://slidepdf.com/reader/full/feedback-line-brochure-4705 1/12
Industrial-Duty Absolute Encoder
Commercial-Light Duty Incremental Encoder
Industrial-Duty Incremental Encoder
Mill-Duty Incremental Encoder
Ultra-Performance Resolver
7/27/2019 Feedback Line Brochure 4.7.05
http://slidepdf.com/reader/full/feedback-line-brochure-4705 2/122
Our absolute encodersreduce machine downtimecompared to standard,
incremental technology encoders, without the cost usually associated with absolutes. The new ACUROline has been engineered for field dependability, by reducing the number of internal components andadding all-digital high-speed networking.
ACURO AI25Industrial AbsoluteEncoderSingle-turn or multi-turn versions offer outstandingresolution. The latest
generation of OptoASIC technology adds reliability through component reduction and diagnostics.It is one of the smallest absolutes available: 50%more compact than earlier line. Priced for allapplications, not just the critical few.
Size/Mounting: 2.5” square flange, servo, or hub shaft mount
Resolution: Up to 14- or 17-bit single-turn, 4096 revolutions multi-turn
Shaft/Bore: Solid shaft and hub shaft versions in common shaft diameters
Power: 10-30 VDC, 5 VDC
Output: DeviceNet, Profibus, Interbus, BiSS, Parallel
AD36 Drive AbsoluteEncoderHub shaft encoder offershigh resolution and a low profile. Networking speedson BiSS open standardsupport speeds five times
faster than proprietary protocols. Low current consumption of 85 mA helps lower the drive cost.Rated up to 120°C.
Size/Mounting: 36mm dia., hub shaft
PPR: 0013, 0019, 1213, 1219
Bore: 8mm
Power: 5 VDC or 7-30 VDC
Output: BiSS, SSI, sincos
Absolute Industrial-Duty Encoders
Types: Single/Multi-Turn, with diverse communica- tion/fieldbus options
Guide: Absolute encoders keep track of position at all times, and provide it at power-up. There is no need to home the machine to establish a reference position when power is restored. They are useful in applications when establishing a home position will
cause costly downtime or scrap, is impractical, or insufficiently accurate.
Application/Industries:
Robotics Machine Tool
Commercial Printing
Hazardous Environments
ACURO AD25 Drive Absolute Encoder ACURO has exceptional
22-bit resolution – thehighest on the market. It isdesigned for integration into
BLDC servo motors for the most demandingapplications such as CNC, precision positioning, andhigh quality printing. Networking on BiSS openstandard supports speeds five times faster thanproprietary protocols. Low current consumption of 85 mA helps reduce system cost. Rated up to 120°C.
Size/Mounting: 2.5” face or servo mount
Resolution: Up to 14- or 17-bit single-turn, 4096 revolutions multi-turn
Shaft: 10 mm, tapered Power: 5 VDC
Output: BiSS, SSI, sine/cosine
AC110 Drive AbsoluteEncoderHollowshaft encoder providesabsolute performance formoderately large shafts.Networking speeds on BiSS
open standard support speeds five times faster thanproprietary protocols. Low current consumption of
85 mA helps lower the drive cost. Rated up to 120°C.Size/Mounting: 110mm dia., hollowshaft (tether)
PPR: 11 to 22 bit
Bore: Up to 50mm
Power: 5 VDC or 10-30 VDC
Output: BiSS, SSI
Reader Tip: For complete specifications, see our catalog or Quick
Reference Guide.
TM
Absolute
Encoders
NEW
NEW
7/27/2019 Feedback Line Brochure 4.7.05
http://slidepdf.com/reader/full/feedback-line-brochure-4705 3/12
General Purpose, Commercial-Light Duty Encoders
Types: Shafted
Guide: Light-duty encoders deliver feedback for position and speed control and are the first choice for small spaces and long life. Compact electronics allow for smaller, more reliable designs.
Series E12 Miniature EncoderServo or face-mount shafted encodersare among the smallest available, sothey squeeze into cramped spaces.They feature high resolution – up to
1024 PPR with optional marker pulse and electronicoperating speeds up to 100 kHz.
Size/Mounting: 1.1” dia. x 1.1”: length
PPR: Up to 1024, quadrature, marker optional
Shaft: 1/8”; load up to 1lb. axial, 1lb. radial
Power/Output: 5, 12, 15 VDC; line driver
Series E14 Miniature Encoder
Servo or face-mount shafted encodersare among the smallest available, sothey squeeze into cramped spaces.They feature high resolution – up to1024 PPR with optional marker pulse
and electronic operating speeds up to 100 kHz.
Size/Mounting: 1.5” dia. x 1.5”: length
PPR: Up to 2540, quadrature, marker optional
Shaft: 1/8”, 1/4”; load up to 3lb. axial, 5 lb. radial
Power/Output: 5, 12, 15 VDC; line driver
Application/Industries:
Photocopiers
Desktop Printers
Elevators
Medical Equipment
Semiconductor Fabs
Incremental
Encoders
Series E23/EC23Compact EncoderFor industrial and commerciapplications with limited spaRugged metal housing is onl
2.3” dia. It provides exceptional resolution, up to 50PPR, and electronic operating speed to 250 kHz. ThE23/EC23 has low-inertia and low-starting torque.
Size/Mounting: 2.3” dia. x 1.65” length; servo or face mount
PPR: (E23) up to 2540, (EC23) 3000 to 5000, quadraturindex
Shaft: 1/4”, maximum load: 5 lb. axial and radial
Power/Output: 5 to 26 VDC; (E23) open collector, totem pline driver, (EC23) open collector, push-pull, differential line driver
7/27/2019 Feedback Line Brochure 4.7.05
http://slidepdf.com/reader/full/feedback-line-brochure-4705 4/124
General Purpose Industrial-Duty Encoders
Types: Shafted
Guide: Industrial encoders are required for digital feed- back applications in environments having electrical noise,airborne contaminants, and medium horsepower motors.
Series H20, H42, H58Industrial EncodersEconomical solutions for medium-resolution applications in an industrialenvironment. H20 and H58 havelong-life bearings, noise immunity,
and washdown protection.
Size/Mounting: ( H20) 2.06” dia.; (H42) 2.5”dia.; (H58) 58mm dia.; (H20, H42, H58) flange (except H58), servo or face
mount
PPR: (H20, H58) Up to 2540, quadrature, optional index; (H42) up to 600, quadrature
Shaft: (H20) 3/8”, 1/4”, or 10mm; (H42) 3/8”, (H58) 6mm,10mm; (H20, H58) load up to 80lb. axial and radial
Power/Output: 5 to 26 VDC; (H20) open collector, push-pull,differential line driver, (H42, H58) push-pull, differential line driver
Series H56 Rotopulser®
EncoderThe most rugged incrementalencoder available is designedto provide precision digital
measurements in harsh environments. A virtually indestructible design is suitable for severe duty inpaper, steel, and lumber mills. Line driver output supportslong cable lengths.
Size/Mounting: 56 C-face and foot mounting; interchangeable with C-face mount tachs BC42 and 46
PPR: Up to 2500, index optional
Shaft: 5/8”, maximum load: 50 lb. axial, 100 lb. radial
Power/Output: 5 to 26 VDC; open collector, push-pull, differential
line driver
Application/Industries:
Robotics Machine Tool
Commercial Printing
Packaging
Windmills
Series HA25/HR25/HC25/HA725 EncodIdeal for shop-floorenvironments, the ultra-reliable HA25 design isavailable with unbreakablemetal disk (HR25) or high
resolution (HC25). Long-life bearings, noiseimmunity, and washdown protection. High speedhigh resolution version (HA725) available.
Size/Mounting: 2.5” dia., flange, servo, or face moun
PPR: (HA25) Up to 2540, (HR25) up to 1024, (HC2up to 1024; (HA725) up to 10,000; quadrature,optional index
Shaft: 3/8”, 1/4”; load up to 40 lb. axial, 35 lb. radia(HA725) 3/8”, load up to 24 lb. axial
Power/Output: 5 to 26 VDC; open collector (except HA725), totem pole, differential line driver
Series 21/22 EncodGeneral-purpose design iscompatible with most programmable controller
electronic counters, motiocontrollers, and motor dr
Use with leadscrews, rack-and-pinions, etc.Environmentally sealed enclosure and heavy duty bearings.
Size/Mounting: 2.5” cube, face mount with pilot
PPR: Up to 1270, quadrature and marker available
Shaft: 3/8”, 1/4” or 6mm
Power/Output: 5 to 26 VDC; open collector, totem poledifferential line driver
Incremental Encoders
7/27/2019 Feedback Line Brochure 4.7.05
http://slidepdf.com/reader/full/feedback-line-brochure-4705 5/12
Series M9, M14Modular EncodersEconomical motor feedbackfor servo and steppermotors, sized as small as0.9". Easy “snap-on”installation.
Size/Mounting: (M9) 0.9" dia., (M14) 1.5" dia.; hub shaft or thru-shaft mount
PPR: Up to 1024, quadrature, optional index
Shaft: Popular English and metric hub diameters
Series E9 MiniatureEncoderPrecise feedback formachines and actuators toosmall for standard encoders.Its low-power standby mode
is ideal for battery powered devices. Speeds up to200 kHz.
Size/Mounting: 0.9” dia. x 0.8” length
PPR: 512, quadrature, optional index
Bore: Popular English and metric hub diameters
Power/Output: 5 VDC; sink source
Motor Mount Commercial-Light Duty Encoders
Types: Hub Shaft, Hollowshaft
Guide: Commercial-duty encoders deliver feedback for motor and position control and are the first choice for low horsepower motors. Compact electronics allow for smaller,more reliable designs.
Application/Industries:
Photocopiers Desktop Printers
Elevators
Medical Equipment
Semiconductor Fabs
Series E14 Hub Shaft EncoderThe Series E14 is a totally enclosed, easy-to-install, incre-mental encoder designed forcommercial and industrial
applications with limited space. It incorporates the latest in microelectronic packaging, LED light sources,and matched sensors.
Size/Mounting: 1.44" dia., servo or face mount
PPR: Up to 2540; quadrature, optional index
Shaft: 1/8" or 1/4"; maximum. load: 3 lb. axial,5 lb. radial
Power/Output: 5, 12, 15 VDC; line driver
E14 with IntegralCoupling This encoder has an integralshaft coupling that simplifiesinstallation. It is designed for
standard mounting on NEMA size 23 and 34 motors, and it is a drop-in replacementfor the E Option of Compumotorsteppers and drives. Precision bearings, O-ring seal.
Size/Mounting: ( for NEMA size 34 motors) 1.63” dia. x 3.29” length, (for NEMA size 23 motors) 1.63” dia. x 3.79” length
PPR: Up to 2540, quadrature, optional index
Bore: 1/4”, 3/8”
Power/Output: 5, 12, 15 VDC; line driver
Incremental
Encoders
7/27/2019 Feedback Line Brochure 4.7.05
http://slidepdf.com/reader/full/feedback-line-brochure-4705 6/126
Series M15, M21Modular EncodersCost effective, modularencoders for stepper andservo motor feedback. Easy installation plus automatic
disk centering and gapping. They handle up to12,000 RPM, 120°C, and electric operating speedsbeyond 200 kHz.
Size/Mounting: (M15) 1.5” diameter x 0.8” length,(M21) 2.1” dia. x 0.8” length; hub shaft or thru-shaft mount
PPR: Up to 1024 (M15), 2048 (M21); quadrature,index standard
Bore: Popular English and metric hub diameters
Power/Output: 5, 12 VDC; open collector, line driver
Series F10, F15, F21Commutating EncodersDrop-in replacement forresolvers. Compact dimensions and flying leads
result in a low-profile package. Speeds up to 300kHz for faster servo loops.
Size/Mounting: (F10) 1.25” dia., (F15) 1.5” dia., (F21) 2.2” dia.; thru-shaft mount
PPR: Up to 2048
Bore: Hub bore diameter 6mm Power/Output: 5 VDC; open collector, differential line driver
Servo/Commutation Motor Mount Industrial-Duty Encoders
Types: Modular, Hub Shaft, Hollowshaft, Commutating
Guide: Precise feedback control for servo and stepper motors. A wide range of styles provide for application flexibility, easy installation, and compact motor designs.
Application/Industries:
Photocopiers Elevators
Medical Equipment
Semiconductor Fabs
Series F14 and F18Commutating EncodersPremium servo motor feedbackin a compact, easy-to-installpackage. High resolution forlow-speed smoothness.
Optional commutation tracks for brushless servomotor control.
Size/Mounting: (F14) 1.55” dia., (F18) 1.96” dia.PPR: Up to 5000 (F14), up to 10,000 (F18)
Bore: Hub bore diameters 0.25”, 6mm, 8mm
Power/Output: 5 VDC; open collector, differential line driver
Incremental Encoders
7/27/2019 Feedback Line Brochure 4.7.05
http://slidepdf.com/reader/full/feedback-line-brochure-4705 7/12
Motor Mount Industrial-Duty Encoders
Types: Modular, Commutating, Hub Shaft, Hollowshaft
Guide: Our industrial-duty motor mount encoders provide reliable feedback in noisy, industrial environments.Ruggedized versions with unbreakable metal disks are available for harsh conditions or heat up to 120º C.
H20 Hub Shaft Encoder An economical solution formedium resolution applications. Hubshaft design simplifies mounting onmotor or machine. Long-life bearings,optional unbreakable disk, andoptional washdown rating.
Size/Mounting: 2.0” dia. x 2.5” depth, hub shaft mount
PPR: Up to 2540, quadrature, optional index
Bore: 3/8”, 5/8”
Series HS20 Sealed
Hollowshaft EncoderHollowshaft design simplifiesmounting, and a flexible tetherminimizes bearing load. Featuresinclude: short depth, unbreakabledisk, electrically isolated, and thermally
insulated. Shaft is environmentally sealed at both ends.
Size/Mounting: 2.5” dia. x 1.9” depth, hollowshaft mount
PPR: Up to 2540, quadrature, optional index
Bore: 6mm to 5/8”
Series HS35 SealedHollowshaft EncoderHollowshaft design eliminatesmounting bracket, flexible shaft coupling, and installation labor.The direct shaft mount eliminatesalignment procedures, and a flexible
tether minimizes bearing load. Features include: short depth,unbreakable metal disk, electrically isolated, and thermally insulated. Shaft is environmentally sealed at both ends.
Size/Mounting: 3.54” dia. x 1.8” depth, direct shaft mount
PPR: Up to 2048, quadrature, optional index
Shaft: bore size 6 mm to 1-1/8”
Series R45 Rotopulser®
Encoder With a thin 5/8” profile, this durableencoder mounts directly on NEMA Cface motors. Non-contact ring-and-geardesign is reliable even in wet, dirty, hightemp environments.
Size/Mounting: Motor frame sizes: 56C to 184C; ring-kit mount
PPR: Up to 60, 120 optional, quadrature
Bore: 5/8”, 7/8”
Application/Industries:
Presses Assembly Lines
Cutters
Machine Tools
Elevators
SeriesHA26/HR26/HC26EncodersThe ultra-reliable HA25 de
is available with unbreakabmetal disk (HR25) or highresolution (HC25). Long-li
bearings, noise immunity, and washdown protectioIntegral shaft coupling and flange provide thermaand electrical isolation.
Size/Mounting: 2.5” dia., flange, servo, or face mount
PPR: (HA25) Up to 2540, (HR25) up to 1024, (HC25to 1024; (HA25, HR25, HC25) quadrature, optional in
Bore: 3/8”, 1/4”; load up to 40 lb. axial, 35 lb. radial
RF53 Incremental
EncoderShafted encoder is idealfor elevators and otherapplications that requiretapered shaft and long-termtrouble-free operation. Con
factory for availability.
Size/Mounting: 53mm dia., shaft mount (motor mount)
PPR: Up to 4096
Shaft: Custom - consult factory
RI80E IncrementalEncoderIdeal for applications that require long service life andreliable performance. The size, output, and hollowshastyle are an exact fit for
elevators. Consult factory for availability.
Size/Mounting: 100mm dia., hollowshaft mount
PPR: 1024, 2048 and 4096
Bore: Up to 45mm
Incremental
Encoders
NEW
NEW
7/27/2019 Feedback Line Brochure 4.7.05
http://slidepdf.com/reader/full/feedback-line-brochure-4705 8/128
Explosion Proof Industrial-Duty Encoders
Guide: Explosion-proof encoders operate safely in environments where the danger of combustion is present.
Application/Industries:
Petroleum Refineries
Chemical Plants
Flour Mills
Coal Conveyance
Series X25 Encoderfor HazardousEnvironmentsHeavy duty industrialenclosure has 1/2" dia.
conduit entry. Forposition and speed control in refining, gasolinestorage and dispensing, chemical coatings,plating, dry cleaning, painting, spraying, andother hazardous environments. Approved forNEC Class 1 and 2, Divisions 1 and 2, GroupsC, D, E, F, G.
Size/Mounting: 4” square flange mount
PPR: Up to 5,000; quadrature, index available
Shaft: 1/4” or 3/8” dia.; max. load: 40 lb. axial,40 lb. radial
Power/Output: 5-26 VDC/open collector; push-pull,
differential line driver
MagCoder® HS35MEncoderFits a wide range of shaft types and sizes. Fast,flexible mounting and
adjustable anti-rotationarm give high tolerance of shaft vibration.
Size/Mounting: 3.6” x 7.4” dia, flexible hollowshaft mount
PPR: Up to 1024, quadrature, index
Bore: 6mm to 1.25”
Power/Output: 5-26VDC; differential line driver
Magneto-Resistive Industrial-Duty Encoders
Incremental
Encoders
Guide: Flexible mounting and adjustabanti-rotation arm give high tolerance ofshaft vibration. Design allows encoder tmove axially, radially and at a tangent
Application/Industries:
Packaging
Commercial Printing
Lumber
Presses
Magneto-Resistive
Incremental Encoders
7/27/2019 Feedback Line Brochure 4.7.05
http://slidepdf.com/reader/full/feedback-line-brochure-4705 9/12
Magneto-Resistive Heavy-Duty Encoders
Guide: SLIM Tach ® Series encoders are built for heavy- duty industrial applications using magneto-resistive technology that is unaffected by dirt, dust, and dampness.Their slim, rugged design is popular with large motor OEMs and for applications with space constraints.
SLIM Tach® 56 EncoderBearingless, rugged encodermounts directly to C-face motors.Only 0.75” thick, it is ideal for tight machine configurations in harshenvironments.
Size/Mounting: 4.5” 56 NEMA C-face
PPR: 64 to 2048 PPR, quadrature, optional index (512 and above)
Bore: 5/8” to 2.5” shaft diameter Power/Output: 5-15 or 5-26 VDC; line driver
SLIM Tach® SL85 EncoderBearingless encoder for AC vectormotors provides higher resolutionthan traditional gear tooth ring kits.Only 1.125” (35mm) thick, it hashardened encapsulated electronics.
Size/Mounting: 8.5” 180 NEMA C-face, thru-shaft,end-of-shaft, and double C-face
PPR: Up to 2048, quadrature, optional index (512 and above)
Bore: 0.625” to 3.75” shaft diameter
Power/Output: 5-15 VDC; line driver
SLIM Tach® RL67 EncoderFits 6.75” machined recess on RPM™
AC or DC motors made by RelianceElectric. Low profile “pancake”design adds only 1.5” to motorlength.
Size/Mounting: 4.5” dia, hollowshaft mount
PPR: Up to 2048, quadrature, optional index (512 and above)
Bore: 0.625” to 1.25”
Power/Output: 5-15V; differential line driver
Application/Industries:
Steel Paper
Lumber
Flooring
Textile
SLIM Tach® 1250Encoder An economical, bearingleheavy-duty encoder designfor 12.5” C face motors.Occupies only 1.4” of mot
shaft. High power line driver for long cable lengt
Size/Mounting: 12.5” C face motors, hollowshaft moun
PPR: Up to 1025, quadrature, optional index (512 an
above)
Bore: 5/8” to 3.75”
Power/Output: 5-26V; up to 26V differential line drive
Magneto-Resistive
Incremental Encoders
7/27/2019 Feedback Line Brochure 4.7.05
http://slidepdf.com/reader/full/feedback-line-brochure-4705 10/120
RIM Tach® 8500Encoder A tachometer for AC and DCdrive control systems. Thin,pancake style mounts directly on the motor. Bearingless
design increases reliability. Dual sensors provideredundant signal in case of sensor failure. Fieldreplaceable sensor can be replaced in minutes, without replacing entire unit. Innovative designrequires no calibration.
Size/Mounting: Up to 8.5”, thru-shaft or end-of-shaft
PPR: 60 to 1200 PPR, quadrature, optional index (480 and above)
Bore: 0.625” to 4.5” shaft diameter
Power/Output: 5-15 or 5-26 VDC; line driver
RIM Tach® 1250Encoder Accepting shaft diameters upto 8", it is ideal for crane andhoist applications. Ductile
cast-iron enclosure protects against acid wash down.
Size/Mounting: 12.5” NEMA C-face, thru-shaft
PPR: Up to 2048, quadrature, optional index (480 and above)
Bore: Up to 8" shaft diameter
Power/Output: 5-15 or 5-26 VDC; line driver
RIM Tach® 6200
Encoder A stainless-steel and cast-ironindustrial tachometer idealfor close-coupled, belt, or
wheel-driven setups in process environments.
Size/Mounting: 4.5" 56 NEMA C-face, thru-shaft
PPR: Up to 2048, quadrature, optional index (480 and above)
Shaft: 5/8" shaft diameter
Power/Output: 5-15 or 5-26 VDC; line driver
Magneto-Resistive Mill-Duty Encoders
Guide: RIM Tach ® Series mill-duty encoders are our most rugged encoders. Their magneto-resistive technology,cast iron and steel enclosures, large bore sizes, and double-sealed, deep-groove radial bearings make these ruggedized encoders suitable for the harshest of plant environments.
Application/Industries:
Steel Mills Paper Mills
Lumber Mills
Flooring Manufacturing
Textile Mills
RIM Tach® HS85EncoderHeavy cast-iron and stainless-steel construction make theRIM Tach HS85 the most rugged hollowshaft encoder in
the industry. Heavy duty double-sealed bearingsdeliver long life. Sensors are interchangeable,
enabling fast maintenance.Size/Mounting: hollowshaft mount
PPR: Up to 2048 , quadrature, optional index (480 and above)
Bore: 1.125” to 4.5” diameter
Power/Output: 5-15 or 5 to 26 VDC; line driver
Magneto-Resistive
Incremental Encoders
7/27/2019 Feedback Line Brochure 4.7.05
http://slidepdf.com/reader/full/feedback-line-brochure-4705 11/12
Ultra-Performance Resolvers
Types: Heavy-Duty & Mill-Duty Housed, Heavy-Duty & High Accuracy Frameless
Guide: Unlike rotary encoders, which use a coded disk to determine position and have a digital output, resolvers are magnetic devices that use two sets of rotating windings and a fixed core winding to generate an analog (sine and cosine) feedback output. Considered more rugged than
encoders, they are used in adverse operating conditions involving extreme temperature, high shock and vibration,and dirty environments.
Heavy-Duty HousedBrushless ResolversSeries 11, R11Ideal mate for brushless servomotors.
Brushless construction uses a rotary transformer to pass the referencesignal to the rotor, eliminating components that can limit lifeand cause noise. Series 11 has excellent angular accuracy andrepeatability. It is rated up to 155°C for high temperatureapplications.
Size/Mounting: 1.1” diameter, servo
Accuracy: + - 2 to + - 20 arc min.
Shaft: 0.120”
Mill-Duty Housed BrushlessResolver Series R25Brushless resolvers are the betterchoice over encoders forapplications that involve very high temperature, vibration and
shock, and dirty environments. The R25 uses a front-and-rearbearing arrangement that gives two or three times the radialload bearing capacity and up to 10 times the life of competingpackages having duplex bearings. Rated for ruggedness:IP-65 protection, 125°C continuous duty, shock to 200g, and vibration to 40g.
Size/Mounting: 2.5” dia., flange or servo mount
Accuracy: + - 7 to + -20 arc min Shaft: 0.3745”, maximum load: 40 lb. axial,60 lb. radial
Application/Industries:
Robotics Machine Tool
Wood Working
Metal Working
Plant Automation
Heavy-Duty FramelesBrushless ResolversSeries 10, 15, 21, 31,Provide absolute positionfeedback for brushless motrobots, and direct-drive mo
in precision rotary platforms and similar servoapplications. The series is ruggedized against vibrand shock, able to operate up to 220° C, resistant noise, and impervious to most industrial contaminOptions include multiple speeds, radiation hardenhigh temperature, flux shielding technology, and
stainless steel housings. HaroMax Resolvers in sizeand 21 feature a tooth-wound design that reduceselectrical error 50 percent.
Size/Mounting: 1.05”-5.5” dia., flange or servo-groove m
Accuracy: + - 2 to + - 20 arc min
Bore: Up to 3.6315”
Heavy-Duty High Accuracy Series 700HaroMax® Resolvers
The HaroMax Series of frameless, brushless resolveprovides maximum accurac
and minimum error for demanding position and sfeedback applications.
Size/Mounting: 1.5”and 2.5” dia., flange or servo-groovmount
Accuracy: + -5 arc min
Bore: 12mm, 20mm
Magneto-Resistive Incremental
Encoders
7/27/2019 Feedback Line Brochure 4.7.05
http://slidepdf.com/reader/full/feedback-line-brochure-4705 12/12
Worldwide Brands:
Anderson TM
Dynapar TM
Eagle Signal TM
Harowe TM
Hengstler TM
Negele TM
NorthStar TM
Partlow TM
PMATM
Veeder-Root TM
West TM
+1 800.873.8731 • www.feedbackdevices.com
More Available. With factories around the world, global sales and applications support, and anexpansive network of distributors, we stay close to our customers – shortening lead times and fostering responsiveness. A three-day lead time is standard, with same-day shipments available o
many products.
More Precise. After 230 combined years of experience in factory automation, we understand increasing demands for product performance. Our encoders and resolvers give you precise contro your designs, with resolution up to 22 bits.
More Durable. Experience with more than 25,000 customers has taught us to design for durabiratings up to 220°C and mechanical shock and vibration specs that others envy.
More Customizable. JIT manufacturing enables us to immediately produce any of thousands of product variations. And we’re happy to work with customers to customize encoders to exact requi
© 2005 Danaher Industrial Controls Group
P i d i U S A
A division of Danaher, a
Fortune 500 company with offices
in 30 countries
around the world.
Danaher Industrial Controls Group was formed through the merger of eleven premier brands, each widely respected within their
product categories. Now integrated into the
Danaher Business System, these brands provide what you need to control the performance and reliability of your designs…controls for your world.
nderson TM brand, Dynapar TM brand, Eagle gnal TM brand, Harowe TM brand, Hengstler TM
and, Negele TM brand, NorthStar TM brand,artlow TM brand, PMA TM brand, Veeder-Root TM
and, West TM brand, RIM Tach ® , and SLIM ach ® are trademarks or registered trademarks
D h C p ti d it b idi i
Headquarters: 1675 Delany Road • Gurnee, IL 60031-1282 • USA
Phone: +1 847.662.2666 • Fax: +1 847.662.6633 • Email: [email protected]
For additional information or a full-line catalog, contact your DICG representative at
+1 800.873.8731 or visit our web site at www.DanaherIndustrialControls.com.
Satellite Locations:North America: North Carolina, South Carolina, Connecticut, Massachusetts, New York,
Canada, British Virgin Islands
Europe: United Kingdom, Italy, France, Germany, Spain, Slovakia
Latin America: Brazil
Asia: China, Japan, Korea, Singapore