JonesAnnouncement #

Bryan D Jones Bryan.d.jones@navy.mil619-342-6325 H Po box 345951-273-4649 W

Dagsboro, DE 19939Citizenship: US

Veterans Preference: 10 points

SSN: 000-00-0000 Clearance level; Secret

Objective:, Engineering TechnicianExtensive experience in the operation and calibration of precision and dimensional measuringEquipment: Maintenance/repair and calibration of Electrical, Electronic instruments: Precision pressure standards, Torque calibrators, Power supplies amplifiers, Temperature standards, flow calibration. Measuring instruments, calipers, micrometers, Height gauges, veneer calipers, gage blocks, surface plates, and other high precision measuring instruments. Cable repair and test equipment

PROFESSIONAL EXPERIENCE

NSWC Corona 08- to present Engineering Technician 40hrs per wk.Naval surface warfare center

Provides Navy-wide technical direction, support, and guidance relating to measurement requirements for Test and Monitoring Systems (TAMS) to NAVSEA, NAVAIR, SSP, and Marine Corps Metrology and Acquisitions Program Offices.

Evaluates measurement and calibration requirements for a wide range of Navy programs and systems, both domestic and Foreign Military Sales.

Responsible for establishing, documenting, and sustaining Navy calibration support requirements including test parameters, required calibration equipment, support documentation, servicing intervals, logistic support levels, and calibration training requirements.

Performs engineering studies and analyses to assure that measurement traceability requirements are achieved.

Provides technical guidance, review, and approval to Navy activities and contractors in the development of Integrated Logistics Support Plans (ILSP), Life-Cycle Support Planning, calibration source data, and similar documents related to the Navy Metrology and Calibration (METCAL) Program.

NWSR 5/05-3/08Engineering TechnicianNaval weapons station Ridgecrest 40hrs

Performs mechanical, and electronic repair, and calibration of Air data Calibrators, power supplies, voltmeters, and decade resistors Attenuators,

JonesAnnouncement #

Function generators o-scopes, oscillators, and high pressure calibrators! And various avionic testing and measuring equipment

United States Navy 1984 to 2005 Aviation Electricians Mate: 4/00 to12/05

Maintains and repairs electrical instruments and power systems on aircraft including power generator conversions, and distribution systems: instrument systems including aircraft engine, flight, and other indicating and warning systems

Troubleshoots and repairs electrical and instrument systems on aircraft uses volt meters, oscilloscope, signal generators, and frequency counters.

Miniature/micro miniature module test and repair 6/00 to present Performs corrective maintenance on circuit cards and electronic modules by troubleshooting and repairing the faulty cards and modules

Physical/Dimensional Calibration Specialist 6/99 to present

Performs third echelon (MIRCS, FMCL, NCL) level duties involving physical, mechanical, plane and angular measurements and calibration, including flow and temperature measurement. aligns, inspects, repairs, troubleshoots, modifies and calibrates electro/mechanical test and monitoring systems.

Oxygen Equipment Cleaning and Calibration 7/99 to 12-05

Clean, repair, and calibrate pressure equipment which will be installed in an oil free oxygen clean environment.

Instrument man, class A School 7/85 to present

Performs maintenance on mechanical instruments uses schematic diagrams Manufactures and maintains instrument repair and calibration toolsCalibrates and adjust pressure instruments and vacuum measuring instruments, centrifugal tachometers, flow, temperature, pressure, and level instruments

SKILLS:

Instrument Calibration tech/ Aviation Electrician / Micro-Electronics Repair Technician:Completed over 2,000 repairs of avionic test equipment, and support equipmentTrained over 400 personnel on the dangers of electro-static-discharge, as command program managerWorked at level one,and three civilian calibration labs and completed over 2,000.00 various calibration items.

- Significantly reduced the turnaround time for Naval Aviation gun gage program. workload form 45to15 days by maintaining an efficient rating over 150%

- Extensive training in optical theory, principles. And calibration by lead technician Steve

JonesAnnouncement #

Toothaker - Completed Advanced Geometric, Dimensioning, and tolerancing by Jamie Dadez - One of only two technicians trained in the calibration of the bore sight collimators- Completed over 600 bore sight collimators with a two week turnaround time the only west coast- laboratory to achieve credibility.

Areas of experience Precision measuring equipment Technical manuals

Physical/mechanical calibration leadership: Shop supervisor On the USS John C Stennis CVN74 supervising ten other sailors in the field of electronic repair, troubleshooting, and ESD safety Avionics test and measuring systems : Completed advanced calibration school at Keesler Air force Base, and Pensacola Naval Air Station Component level electronic troubleshooting and repair: Qualified as super technician( 1820 and 1821)Quality Assurance inspection Oxygen clean systems certified

Education1996 Precision physical and dimensional measurement performs third echelon Duties involving physical, mechanical, plane and angular calibration1999 Avionics Common Core perform routine and scheduled maintenance on Aircraft electrical, Instrument and navigational systems.1998 Advanced Calibration School Kessler Air Force Base 2000 Micro miniature Electronic repair solder and DE solder through board components and Surface mounted components to printed circuit boards.2001 Fiber optics technician troubleshooting and repair of fiber optic cables and connectors.2004 Pursuing associate’s degree in electro mechanics2006 Naval Weapons Center China Lake engineering technician; performs mechanical and electronic repair and calibration. Air data calibrators, power supplies, voltmeters, and decade resistors Attenuators, function generators o-scopes, oscillators, and high pressure calibrators! and various avionic testing and measuring equipment2009 University of phoenix completed several courses for Engineering program2010 Grantham University enrolled in the Electronic Engineering, and computer programming course2014 Graduated Grantham University with a degree in Electronics and Computer programing2014 Attending University of Phoenix Bachelors program for Engineering ManagementJob Related Training

2008 (to present) Naval Surface Warfare Corona Ca. Completed two week advanced course on the calibration, maintenance, and repair of the schwein manometer, And Ruska Deadweight Tester by Egyptian Air Force MAJ: Ahmeed Taha .Increasing lab capabilities in pressure and vacuum.

2011 to (present) Electronic Engineering, Degree have completed 16 courses at Grantham University with only Two courses remaining. Est graduation 02/20/14

2012 (to present) Engineering Technician: Naval Surface Warfare Corona Responsible for maintenance, and calibration of the bore sight collimators program. H-60 The only certified calibration site on West coast

JonesAnnouncement #

2012( to present) certification to become a certified quality auditor ISO 9001 and ANSI/NCSL Z540-1 have conducted several audits for Seal Beach and NSWC Corona Calibration labs.

2013 Completed training with the Taiwanese Air Force in Kaohsiung Taiwan; Training them in the fields of pressure, vacuum, mass, and length measurement.

2014 Completed advanced Schwein manometer training in the calibration, and repair of the schwein manometer at Patuxent River Naval Station.

2014 Completed the repair, calibration, and alignment of several shop standards atPatuxent River Naval Air Station helping them reduced their turnaround time.

Honors, AwardsIraqi Freedom, Operation Anaconda, Kuwait Liberation, Enduring freedom

Other Information Coordinates with METCAL R&D Program Manager on new

programs or upgrades to existing programs that require a new measurement capability or a new measurement support approach.

Provides technical direction, support, and guidance relating to advanced measurement requirements and methods.

Oversees development and execution of new measurement technology work including goals, objectives, budget, and scheduling.

Provides advanced analytical metrology services including providing oversight and direction to the analysis of calibration intervals for the Navy TAMS and coordinating measurement reliability targets with METCAL sponsors to manage program risk. Directs Metrology Research and Development (R&D) efforts within government and industry in support of calibration requirements as well as engineering and in-service calibration applications.

Performs scientific studies, analyses, and assessments of state- of-the-art calibration and measurement technologies.

Develops engineering prototypes of hardware and software systems for new measurement and calibration technologies.

TROUBLESHOOTING:Highly skilled at testing, and troubleshooting faulty electronic equipment down to a component using available schematics, technical data and test equipment.

JonesAnnouncement #

LEADERSHIP:As a Quality Assurance Inspector I have extensive knowledge of aviation specifications and standards of various avionic equipment supervised all aspects of calibration and repair actions. Completed over 500 avionic inspections during “Operation Iraqi Freedom”