featuring: new

LARGE ONE DAY – TWO LOCATION AUCTION FEATURINGLATE MODEL FABRICATING, WELDING & CNC MACHINING EQUIPMENT


(24) Late Model Miller Welders Of All Types and Models

15’W X 25’L X 12’H Mfg. Unknown Modular Panel ConstructionDrive-In Rear Draft Spray Booth

(2) 10 Ton X 50’ Span MPH Crane Inc. Single Girder Top Running Overhead Bridge Cranes

AKS Accu-Kut-System Model P-2030 Hy-Definition DualTorch CNC Plasma Cutting Table

135 Ton X 12’ Cincinnati 135CBII Hydraulic Power Press Brake

50 Ton Geka Model Hyd-50Hydracrop 50/A HydraulicPower Ironworker

SWI Trak Model Sport B3Proto-Trak CNC Bed TypeVertical Milling Machine

Marvel Model 8-Mark II TiltFrame Vertical Band Saw

Cincinnati Industrial Auctioneers Inc.2020 DUNLAP ST., CINCINNATI, OHIO 45214 PHONE (513) 241-9701 / FAX (513) 241-6760INTERNET: cia-auction.com for printable brochures, catalog, terms and proxy-bidding

Cincinnati Industrial Auctioneers Inc.SALE UNDER THE MANAGEMENT OF

NEW1997

288”TABLE

NEW1996

NEW1990

Featuring: AKS CNC Hi-Def Plasma Cutting Table (1997), Cincinnati 135CBIIHydraulic Press Brake (1996), Geka Hyd-50 Ironworker, Whitney 2530 CNC Punch,

(4) Cincinnati Milacron CNC VMC’s (To 1996), Franklin W550X7 Beam Punch,Euromac 220/6S Notcher, (2) Cincinnati Shears, (6) Marvel Band Saws,

(24) Welders, Late Model Toolroom Machinery, Anver Vacuum Lift, Panjiris 30-6ABPositioner, (3) Late Model Lift Trucks to 10,000 Lbs., (7) Overhead Bridge Cranes to

10 Ton, (2) Drive In Spray Booths to 15’ X 25’, Air Compressors, Large Quantity Shop & Support Equipment

COMPLETE METALWORKSTECHNOLOGY, INC.TUESDAY, JUNE 29TH

NEWAPPROX.

2000


Ordered Sold By Secured Parties – The Former Assets of

Select Items of Major Machinery to be Offered Via

“Live Internet Bidding” at BidSpotter.com

See Instructions on Page 3

To Become a Qualified Bidder on the Internet

SALE LOCATIONS:LOCATION ONE: Starting at 10:00 AM371 Lawton Avenue – Monroe, Ohio 4505030 Miles North of Downtown Cincinnati off I-75

LOCATION TWO: Starting at Approx. 1:00 PMApprox. 1 Hour After Conclusion of Monroe Auction

1292 Glendale Milford Road – Cincinnati, Ohio 4521515 Miles North of Downtown Cincinnati off I-75

INSPECTION:Monday, June 28th From 10:00 AM to 4:00 PM

MONROE LOCATION – STARTING AT 10:00 AMMONROE LOCATION – STARTING AT 10:00 AM

WELDERS – ALL TYPES200 Amp Tafa Model 30-8A Arc Spray Power Unit;S/N JC636571650 Amp Miller Deltaweld 652 CV-DC WeldingPower Source; S/N KF834105, Skid Mounted w/ Boom,SS-60 Wire Feeder650 Amp Miller Deltaweld 650 CP DC WeldingPower Source; S/N JK560100(3) 450 Amp Miller Dimension / Deltaweld 452CC/CV DC Welding Power Sources; S/N’s KG166152,KJ287646, KF913664 & N/A, All w/ Various Model WireFeeds450 Amp Miller Invision 456 DC Inverter ArcWelder; S/N KH488342, Miller XR Control ExtendedReach Wire Feeder450 Amp Miller Deltaweld 451 CV DC WeldingPower Source; S/N KE660068, Miller 60 Series 24V WireFeeder(4) 350 Amp Miller Synchrowave 351 CC AC/DCWelding Power Sources; S/N’s KH513613, KH565220,KF800634 & KG118254(5) 300 Amp Miller CP-302 CV-DC Welding PowerSources; S/N KH509319 w/ KH788799, KH329655,KH505000 & KH329675, All w/ Various Model Wire Feeds(4) 300 Amp Miller CP-300 CV DC Arc WeldingPower Sources; S/N’s KD441469, DE659210, KE740156& KD460420, Various Model Wire Feeds (2) 250 Amp Miller Millermatic 250 CV-DC ArcWelding Power Sources w/ Wire Feeders; S/N’sKD533494 & KE672642250 Amp Miller Model CP-250TS ConstantPotential DC Welder; S/N JK669487, Miller 52A 115VConstant Speed Wire Feeder

WELDING RELATED3,000 Lb. Pandjiris Model 30-6AB WeldingPositioner; S/N 10234X11-8, 50” Dia. Face Plate, 18 K inLB, Rotation Torque SEE PHOTO3’ X 7’ Mfg. Unknown Model 210 Single AxleWelder Trailer; Vin #5DLUSO51XXE000372, GVWR:1610 – NO TITLE5’ X 16’, 4’ X 4’ & 30” X 60” Weldsale Acorn StyleCast Iron Welding Tables60”W X 30’L X 2” Thick Heavy Duty Welding Table

SEE PHOTO(2) 138” X 169” X 14” Thick Heavy Duty Cast IronSlotted Welding Tables SEE PHOTOOther Welding Related Equipment Consisting of;Linde Type CM-79 Track Burning Machine, Miller Spectrum701 Plasma Cutting System, 20 KVA Miller Model SSW-2040ATT Spot Welder, Ace Model 73-800G Portable Fume

Collector, Aercology Weld Air Portable Fume Collector,United Air Model FP112-3 Fume Collector, Micro Air ModelRP8 Fume Collector, Airlux 5000 Portable Fume Collector

IRONWORKER50 Ton Geka Model Hyd-50 Hydracrop 50/AHydraulic Power Ironworker; S/N 7949, 10” Throat, 22”X 10” Table, 1-9/16” Dia. Capacity, 1-9/16” Square Capacity,1-1/8” X 1/2” Punch Capacity, Foot Pedal SEE PHOTO

HYDRAULIC NOTCHER8-1/2” X 8-1/2” Euromac Model 220/6S HydraulicPower Notcher; S/N N/A, 30º - 140º Variable BladeAngles, Material Guide SEE PHOTO

BEAM PUNCH50 Ton Franklin Mfg. Co. Model W550X7 BeamPunch; S/N 1773A859, 1.625” Stroke, 1.500” Max Hole,.750” Max Material Thickness

TUBE BENDERErcolina Model 050 Top Bender Pipe Bender; S/N594168, 2 “ Tube, 1-1/2” Sch. 40 Pipe, Max., CLR 8-7/8“,Microprocessor Control (New 1994) SEE PHOTO

FABRICATING MACHINERY4’ X 11 Ton Di-Acro Mechanical Press Brake; FrontOperated Manual Back Gauge16 Ga. X 36” Pexto Model 390E Mechanical PowerBending Roll; S/N 631995, 36” Wide36” Niagara Mechanical Power Bending Roll36” Niagara Hand Slip Roll4’ Manual Apron Break

SQUARING SHEAR10 Ga. X 12’ Cincinnati Model 1012 MechanicalPower Squaring Shear; S/N 19650 SEE PHOTO

BAND SAWSMarvel Model 8-Mark II Tilt Frame Vertical BandSaw; S/N 827876, Coolant SEE PHOTOMarvel Series 15A Model 15A4/M1/M8 AutomaticHorizontal Band Saw; S/N E-151331, Coolant,Hydraulic Infeed Conveyor SEE PHOTO(3) 18” X 20” Marvel No. 8 Tilt Frame VerticalBand SawsCarolina Model HV20 Horizontal Band Saw;S/N HV209407, Coolant

TOOLROOM MACHINERYSWI Trak Model Sport B3 Proto-Trak CNC BedType Vertical Milling Machine; S/N 00-0612, ProtoTrak M3 Control, 10” X 50” Approx. Table Size, Late Model,Low Hour, Excellent Condition (New Approx. 2000)

SEE PHOTO

Marvel Series 15A Model 15A4/M1/M8 AutomaticHorizontal Band Saw

(2) 138” X 169” X 14” Thick Heavy Duty Cast IronSlotted Welding Tables

60”W X 30’L X 2” Thick Heavy Duty Welding Table

3,000 Lb. Pandjiris Model 30-6AB Welding Positioner

Ercolina Model 050 TopBender Pipe Bender

Marvel Model 8-Mark IITilt Frame Vertical BandSaw

8-1/2” X 8-1/2” EuromacModel 220/6S HydraulicPower Notcher

50 Ton Geka Model Hyd-50Hydracrop 50/A HydraulicPower Ironworker

10 Ga. X 12’ Cincinnati Model 1012 Mechanical PowerSquaring Shear

Close Up View (2 of 4) Late Model Miller TigWelders

Close Up View (3 of 19) Late Model Miller MigWelders

NEW1994

MONROE LOCATION – STARTING AT 10:00 AMMONROE LOCATION – STARTING AT 10:00 AM

(2) 13” X 40” Kent Model TRL 13X40 Geared HeadEngine Lathes; S/N 1340471592 & 13404071595,Newall Digital Readouts, Chucks, Late Model, Low Hour,Excellent Condition (New 7/2004) SEE PHOTO

6” X 18” Chevalier Falcon Model 618M Hand FeedSurface Grinder; S/N A3888010, Chuck, Late Model LowHour, Excellent Condition SEE PHOTO

Other Toolroom Machinery Consisting of; 6” X 18”Reid & Thompson Hand Feed Surface Grinders, BridgeportVertical Milling Machine – Missing Parts, 13” Fosdick SingleSpindle Floor Drill w/ 20” Dia. T-Slotted Table

CNC MACHINING CENTERCincinnati Milacron Cintimatic 20H-2500 CNCMachining Center; S/N 55403H1-79-4, AcramaticComputer Numerical Control, 31” X 102” T-Slotted Table,18” X 102” T-Slotted Riser Table, 20 HP Spindle Motor

MISC. MACHINERY8500 Watt Briggs & Stratton Model 01654 EliteSeries Portable Gas Generator; S/N 10107162286’ D X 12’ W X 7’ High Binks Back Draft BothTogether / Welded Paint BoothTorit Donaldson Model 2DF4 Pulse Tube DustCollector; S/N 219505, 5 HPOther Misc. Machinery Consisting of; 2-1/2” BurrKing Model 960 Bench Model Belt Sander, Oster Model2372 Power Pipe Threader, A-Bec Portable Sand Blast Pot,17” Everett Model 20AA22 Chop Saw, 4” Almi ModelAL100B Belt Grinder, 58”L X 28”W X 42”H Skat Blast DryBlast System

AIR COMPRESSORS & RELATED25 HP Atlas Copco Model GA18 Cabinet EnclosedRotary Screw Air Compressor; S/N AII222244,Running Hours: 10,333 (New 1996) SEE PHOTO

300 & 100 Gallon Air Receiving Tanks

OVERHEAD BRIDGE CRANES & RELATED(2) 10 Ton X 50’ Span MPH Crane Inc. SingleGirder Top Running Overhead Bridge Cranes; S/N’s90C365 & 90C363, 10 Ton Cable Hoists, Pendant Controls(New 1990) SEE PHOTOApprox. 125’ Bolt Together I-Beam Crane Rail20,000 LB Samson Model SC20000 Digital CraneScaleEriez Model ST-8 Electric Lifting Magnet; S/N S1168

LIFT TRUCKS & RELATED10,000 LB Kalmar Model ACC100TL2PS LP GasSolid Tire Lift Truck; S/N 650069, 153” Lift Height, 52”Forks, Side Shift, 9977 Hours, Two-Speed SEE PHOTO8,000 LB Caterpillar Model GP40 LP GasPneumatic Tire Lift Truck; S/N 1CM00391, 3-StageMast, 187” Lift Height, Side Shift SEE PHOTO5,000 LB Allis Chalmers Model ACC55BPS LP GasSolid Tire Lift Truck; S/N AEH117126, 2-Stage Mast,126” Lift Height2,000 LB Clark Model SP20 Walk Behind ElectricPallet Truck; S/N SP20412327674, w/ Charger

SHOP EQUIPMENTShop Equipment Consisting of; (3) MilwaukeeMagnetic Drills, (2) Dump Hoppers, (3) Oxy AcetyleneCarts, (2) Job Boxes, Banding Cart, Portable A-Frame Rack,1,000 LB Fairbanks Platform Scale, (2) 1,000 LB LiftingMagnets, Flex Arm Tapper, Pipe Bender, 5’ X 8’ X 7” & 18”X 24” X 4” Granite Surface Plates, 42” Box Fan, PedestalModel Fans, Wall Mount Fans, 12’ Fiberglass Step Ladder, 4’Portable Steps, Self Dumping Hopper, Rubbermaid ShopCarts, Steel Saw Horses, Hardware, Steel Storage Cabinets,H.D. Bar Clamps, 24-Volt Hertner Battery Charger, 100 TonEnerpac Hydraulic Jack & Other Related Items – SOME OFTHESE ITEMS ARE LOCATED AND AT THE GLEN-DALE MILFORD FACILITY, SEE AUCTION CATALOGFOR EXACT ITEM LOCATION INFORMATION

10,000 LB Kalmar Model ACC100TL2PS LP Gas Solid TireLift Truck

60” Wide Skat BlastAbrasive Blast Cabinet

SWI Trak Model Sport B3Proto-Trak CNC Bed TypeVertical Milling Machine

25 HP Atlas Copco ModelGA18 Cabinet EnclosedRotary Screw AirCompressor

6” X 18” Chevalier FalconModel 618M Hand FeedSurface Grinder

(2) 13” X 40” Kent Model TRL 13X40 Geared Head EngineLathes

NEW2004

(2) 10 Ton X 50’ Span MPH Crane Inc. Single Girder Top Running Overhead Bridge Cranes

8,000 LB Caterpillar Model GP40 LP Gas Pneumatic TireLift Truck

NEW1996

NEWAPPROX.

2000

NEW1990

WEBCAST BIDDER INSTRUCTIONS➢ All Internet bidders must register for this auction at www.bidspotter.com at least 48-Hours Prior to

the Sale Date, if you do not you will not be approved.➢ All Internet bidders must Post a Deposit of Approx. 25% of Your Planned Spending Budget or $5,000

Minimum with Cincinnati Industrial Auctioneers in Order to be approved to Bid. Those who do NotPost the Deposit Will Not be Approved. Period.

➢ Only Major Items Will be Available for Online Bidding. Pleaserefer to the Listing on www.bidspotter.com for AvailableOnline Items.

➢ There is a 15% Buyer’s Premium in Effect for All Online Purchases.➢ We Highly Recommend that Potential Buyers Attend this Auction & Bid Live Onsite. This will give you

the Ability to Inspect the Items & Fully Appreciate Their Condition, Along with Saving You 3% of theBuyer’s Premium.

No Last Minute Registrations will be accepted. Make Sure to Register & Post Your Deposit No Later than48-Hours Prior to the Start of the Auction.

CINCINNATI LOCATION – STARTING AT APPROX. 1:00 PMCINCINNATI LOCATION – STARTING AT APPROX. 1:00 PM

15” X 30” Leblond Makino Regal Geared Head EngineLathe

(3) 2 Ton X 32’ Approx. Span Crane America ServicesSingle Girder Bottom Running Overhead Bridge Cranes

3 HP Bananza Model B-650 Air Make Up Unit

50 HP Ingersoll RandModel SSR-EP50SECabinet Enclosed RotaryScrew Air Compressor

10 HP Bananza Model B-1000 Air Make Up Unit

Domnick Hunter CRD200230/1/60 EL.DRRefrigerated Air Dryer

Partial View (1 of 4) VariousStyle Welding Tables

3 HP Acer Ultima Model3VKH Vertical MillingMachine

Cincinnati Milacron Model Sabre 750EAA CNC Vertical Machining Center

15’W X 25’L X 12’H Mfg. Unknown Modular Panel Construction Drive-In Rear Draft Spray Booth

9’W X 10’L X 9’H Mfg. Unknown Modular PanelConstruction Drive-Thru Rear Draft Spray Booth

NEW1995

NEW1988

MONROELOCATION

TOOLROOM MACHINERY15” X 30” Leblond Makino Regal Geared HeadEngine Lathe; S/N 16436, 8” 3-Jaw Chuck, 1800 RPMSpindle Speed, 9-1/2” Swing Over Carriage, Accu-RiteQuickcount II DRO, Coolant SEE PHOTO

3 HP Acer Ultima Model 3VKH Vertical MillingMachine; S/N 9504095, 10” X 50” T-Slotted Table, 60 -4200 RPM Spindle Speeds (New 1995)

OVERHEAD BRIDGE CRANES & RELATED2 Ton X 25’ Approx. Span X 75’ Approx. LongGorbel Free Standing Overhead Bridge CraneSystem; 2 Ton Budgit Electric Chain Hoist, Twin GirderBottom Running Bridge, Bolt Together Construction, Approx.17’H Rails

1 Ton X 28’ Approx. Span X 40’ Approx. Long FreeStanding Overhead Bridge Crane System; 1 TonBudgit Electric Chain Hoist, Pendant, Double Girder BottomRunning Bridge, Bolt Together Construction, 138” Approx.High

1 Ton X 10’ Arm Jib Crane

PAINT BOOTHS15’W X 25’L X 12’H Mfg. Unknown ModularPanel Construction Drive-In Rear Draft SprayBooth; Filter System, Exhaust Fan, Lights, 9’ X 9’ DoorEntrance, 9’ Ceiling Height, Nu-Tech Controls

SEE PHOTO9’W X 10’L X 9’H Mfg. Unknown ModularPanel Construction Drive-Thru Rear DraftSpray Booth; Filter System, Exhaust Fan, Lights, 52”X 96” Front & Rear Door Entrance, Nu-Tech Controls

SEE PHOTO

AIR MAKE UP UNITS10 HP Bananza Model B-1000 Air Make UpUnit; S/N 95021000352, CFM Rated: 12,000, MaxBTU/Hr: 1,000,000 SEE PHOTO3 HP Bananza Model B-650 Air Make Up Unit;S/N 9502650.53, CFM Rated: 3,600, Max BTU/Hr:620,000 SEE PHOTO

AIR COMPRESSORS & RELATED50 HP Ingersoll Rand Model SSR-EP50SECabinet Enclosed Rotary Screw AirCompressor; S/N G7365U98307 SEE PHOTODomnick Hunter CRD200 230/1/60 EL.DRRefrigerated Air Dryer; S/N 2151460004

SEE PHOTO300 Gallon Vertical Air Receiving Tank

OVERHEAD BRIDGE CRANES(3) 2 Ton X 32’ Approx. Span Crane AmericaServices Single Girder Bottom RunningOverhead Bridge Cranes; (2) w/ 2 Ton CoffingElectric Chain Hoists & Pendant, (1) w/ 2 TonHarrington Electric Chain Hoist & Pendant

SEE PHOTO

PAINT BOOTHS & RELATEDTO BE SOLD VIA PHOTO FROM THEGLENDALE MILFORD RD. LOCATIONLocated at Complete Metalworks Technology

Carthage Facility

16 East 72nd Street, Cincinnati, Ohio 45216Just A Few Miles From the Glendale Milford

Auction Site

INSPECTION BY APPOINTMENT ONLYWITH AUCTIONEER

CINCINNATI LOCATION – STARTING AT APPROX. 1:00 PMCINCINNATI LOCATION – STARTING AT APPROX. 1:00 PM

AKS Accu-Kut-System Model P-2030 Hy-Definition Dual Torch CNC Plasma Cutting Table

2 Ton X 25’ Approx. Span X 75’ Approx. Long Gorbel Free StandingOverhead Bridge Crane System

150 Ton X 12’ Cincinnati 9 Series Mechanical PowerPress Brake

Cincinnati Milacron Model Sabre 1000 ERO CNCVertical Machining Center

50 Ton Esterline Whitney Model 2530 CNC Single EndPunch

1/4” X 12’ Cincinnati Model 2CC12 Mechanical PowerSquaring Shear

135 Ton X 12’ Cincinnati 135CBII Hydraulic PowerPress Brake

NEW1997

NEW1995

NEW1996

NEW1990

NEW1996

PLASMA CUTTING SYSTEMAKS Accu-Kut-System Model P-2030 Hy-DefinitionDual Torch CNC Plasma Cutting Table; S/N 2030-797, 88” X 288” Table Size, Hypertherm HD3070HyDefinition Power Supply, Hypertherm HT-2000 PowerSupply, Both Torches w/ Hypertherm Torch HeightControllers, (2) Pendant Control Units (New 1997)

SEE PHOTO

CNC SINGLE END PUNCH50 Ton Esterline Whitney Model 2530 CNC SingleEnd Punch; S/N 630-885-42038, PC Control, WhitneyCNC Back Gage, 144” X 30” Max Sheet Size, 5” Max Dia.Hole, 31” X 60” Bed, 195” X 60” Roller Table, Foot Pedal(New 1995) SEE PHOTO

Whitney Tooling Including Toolsetters, Punches,Punch Holders & Related

PRESS BRAKES135 Ton X 12’ Cincinnati 135CBII HydraulicPower Press Brake; S/N 49300, Cincinnati CBIIControl, 12’ Overall Length, 10’ Between Housings, 8”Stroke, Foot Pedal, Palm Buttons (New 1996)

SEE PHOTO

150 Ton X 12’ Cincinnati 9 Series MechanicalPower Press Brake; S/N 29749, Automec CNC 99Autogauge, 12’ Overall Length, 10’ Between Housings, 3”Stroke, Foot Pedal SEE PHOTO

Numerous Press Brake Dies in Lengths to 10’

SQUARING SHEAR1/4” X 12’ Cincinnati Model 2CC12 MechanicalPower Squaring Shear; S/N 46404, Cincinnati 823264Micro Computer Gauge Control, Front Operated PowerBack Gauge, Front Support Arm (New 12/1989)

SEE PHOTO

BAND SAW18” Marvel Model MK1 Series 8 Tilt Frame VerticalBand Saw; S/N 821049, 33” X 42” T-Slotted Table

CNC VMC’SCincinnati Milacron Model Sabre 1000 ERO CNCVertical Machining Center; S/N 7039A01960717,Cincinnati Milacron Acramatic 2100 CNC Control, 20” X44” T-Slotted Table, 1020 MM X-Axis, 510 MM Y-Axis, 560MM Z-Axis, 700 Kg Table Load Capacity, No. 40 Taper, 21-Position ATC, 10,000 RPM Spindle Speed, Coolant (New1996) SEE PHOTO

Cincinnati Milacron Model Sabre 750 EAA CNCVertical Machining Center; S/N 7029-A01-88-0025,Cincinnati Milacron Acramatic 850 CNC Control, 17” X34” T-Slotted Table, 762 MM X-Axis, 510 MM Y-Axis, 510MM Z-Axis, 450 Kg Table Load Capacity, No. 40 Taper, 21-Position ATC, 10,000 RPM Spindle Speed, Coolant (New1988) SEE PHOTO

Cincinnati Milacron Model Sabre 750 EAA CNCVertical Machining Center; S/N 7029-A01-88-22, DISASSEMBLED – MISSING PARTS, LOCATED AT THECARTHAGE FACILITY – TO BE SOLD VIA PHOTO

(80) No. 40 Taper Toolholders of All Types

VISIT OUR WEBSITEFOR UPCOMING SALES

cia-auction.com

Select Major Items

To Be Offered On Line See Page 3 For Details

All equipment described herein will be sold“as is”, “where is” to the highest bidder orbidders for cash in accordance with our regu-lar terms and conditions of sale. Unless othersatisfactory arrangements are made, a 25%deposit in cash, certified or cashier’s checkpayable to Cincinnati Industrial Auctioneers,Inc., is required on all purchases. Firm andpersonal checks accepted only if accompaniedby a letter from your bank guaranteeing yourfunds. All sales are subject to state and/orlocal taxes unless a signed exemption form ispresented at the time of purchase. All bal-ances are due at the conclusion of the sale.No merchandise may be removed while thesale is in progress. All bidders must complywith our Standard Terms of Sale, copies ofwhich will be available at the sale site or canbe obtained from our website.

12% ONSITE BUYER’S PREMIUM 15% ONLINE BUYER’S PREMIUM

TERMS OF SALE

Cincinnati Industrial Auctioneers, Inc. – License No. 63-1983-10439Jeffrey L. Luggen – License No. 57-1983-33789Jerome A. Luggen – License No. 52-1983-33799Jeffrey M. Luggen – License No. 2010-0000-26Joseph M. Luggen – License No. 2010-0000-19

John F. Rome – License No. 57-2000-84249

AUCTIONEERS

Monroe Location Directions: From I-75, 12 Miles North of the I-275 and I-75 Junction. Proceed to Exit 29 OH-63 Monroe/Lebanon.Turn West onto OH-63 and Continue 3/4 Miles to Lawton Ave. TurnRight onto Lawton Ave and Proceed 1/2 Mile to Sale Site on Left.Watch for Auction Signs & Parking Signs.Cincinnati Location Directions: From I-75 just South of the I-275and I-75 Junction. Proceed to Exit 14 Glendale/Milford Rd. TurnWest onto Glendale Milford Rd. Continue for Approx 1/2 Mile to SaleSite on Right. Watch for Auction Signs & Parking Signs.

DIRECTIONS



Cincinnati IndustrialAuctioneers Inc.2020 DUNLAP ST., CINCINNATI, OHIO 45214PHONE (513) 241-9701 / FAX (513) 241-6760INTERNET: cia-auction.com

FIRST CLASS MAIL! PRE-SORTFIRST CLASS

U.S. POSTAGEPAID

CINCINNATI, OHIOPERMIT NO. 3593

Important MailTO BE DIRECTED TO THE ATTENTION OF EXECUTIVE PERSONNEL☞

SALE DATETuesday,

June 29th10:00 am

Cincinnati Industrial Auctioneers Inc.2020 DUNLAP ST., CINCINNATI, OHIO 45214 PHONE (513) 241-9701 / FAX (513) 241-6760INTERNET: cia-auction.com for printable brochures, catalog, terms and proxy-bidding

Cincinnati Industrial Auctioneers Inc.SALE UNDER THE MANAGEMENT OF


LARGE ONE DAY – TWO LOCATION AUCTION

Although information has been obtained from sourcesdeemed reliable, the auctioneer makes no warranty orguarantee, expressed or implied, as to the accuracy ofthe information herein contained. It is for this reasonthat buyers should avail themselves of the opportunityto make inspection prior to the sale. This brochure isintended to provide general information of the equipmentbeing offered and is subject to errors, omissions, additionsor deletions. Please check with the Auctioneer’s Office fora final listing. Items offered may or may not necessarily besold as described and/or photographed in this brochure.

MAIL BIDS ACCEPTED WITH A 25% DEPOSIT

IMPORTANT NOTICE:

COMPLETE METALWORKSTECHNOLOGY, INC.TUESDAY, JUNE 29TH (24) Late Model Welders(24) Late Model WeldersLarge Paint BoothsLarge Paint Booths

Cincinnati Press BrakeCincinnati Press BrakeCincinnati Press Brake

(24) Late Model Welders

AKS Plasma TableAKS Plasma TableAKS Plasma Table

Large Paint Booths

Ordered Sold By Secured Parties – The Former Assets of

COMPLETE METALWORKSTECHNOLOGY, INC.

Ordered Sold By Secured PartiesThe Former Assets of

COMPLETE METALWORKSTECHNOLOGY, INC.

LOCATION ONE: Starting at 10:00 AM371 Lawton Avenue – Monroe, Ohio 4505030 Miles North of Downtown Cincinnati off I-75

LOCATION TWO: Starting at Approx. 1:00 PM1292 Glendale Milford Road – Cincinnati, Ohio 45215

15 Miles North of Downtown Cincinnati off I-75

SALE LOCATIONS:LOCATION ONE: Starting at 10:00 AM371 Lawton Avenue – Monroe, Ohio 4505030 Miles North of Downtown Cincinnati off I-75

LOCATION TWO: Starting at Approx. 1:00 PMApprox. 1 Hour After Conclusion of Monroe Auction

1292 Glendale Milford Road – Cincinnati, Ohio 4521515 Miles North of Downtown Cincinnati off I-75

INSPECTION:Monday, June 28th From 10:00 AM to 4:00 PM

featuring: new

Documents