features & specifications integrated exit-unit combo€¦ · 20 87 78 68 60 54 48 43 39 35 32...

11
CONTRACTOR SELECT / EMERGENCY LED-EXIT-UNIT-COMBOS Catalog Number Notes Type ORDERING INFORMATION Contractor Select LED Exit/Unit Combos FEATURES & SPECIFICATIONS INTENDED USE Combination emergency lighting unit and exit. Suitable for illuminating the path of egress and for marking the means of egress in accordance with Life Safety Code NFPA 101. CONSTRUCTION Injection-molded, flame-retardant, high-impact, thermoplastic housing with snap-fit design components for easy installation. Universal J-box pattern. Universal chevrons are easily removed for directional indication. Fully assembled single face with extra faceplate for easy field-conversion to double face. Track and swivel arrangement permits full range of lamp adjustment. Letters 6" high with 3/4" stroke, with 100 ft viewing distance rating, based on UL924 standards. OPTICS The typical life of the LED lamp is 10 years. Two 1W LED lamps for emergency light. ELECTRICAL Dual-voltage input 120V or 277V AC; 9.6V output. Emergency combo provided with test switch, status indica- tor and rechargeable battery. Maintenance-free nickel-cadmium battery provides 90 minutes of emergency power. High output (HO) option provides 3W of remote capacity, which powers up to three ELA LED lamps. LISTINGS UL Listed. Meets UL 924, NFPA 101, NFPA 70-NEC and OSHA illumination standards. Indoor damp location 32°F to 122°F (0°C to 50°C) listed standard. WARRANTY Fixtures are covered by Lithonia Lighting 24-month warranty against mechanical defects in manufacture. All life safety equipment, including emergency lighting for path of egress must be maintained, serviced, and tested in accordance with all National Fire Protection Association (NFPA) and local codes. Failure to perform the required maintenance, service, or testing could jeopardize the safety of occupants and will void all warranties. Note: Specifications subject to change without notice. Actual performance may differ as a result of end-user environment and application. Standard Catalog Supply Input Pallet Carton Number UPC Description Voltage Wattage Qty. Qty. ECR LED M6 784231874516 Red 120/277 3.8 108 6 ECG LED M6 784231874592 Green 120/277 3.2 108 6 ECR LED HO M6 784231874561 Red, high output 120/277 3.8 108 6 ECG LED HO M6 784231874615 Green, high output 120/277 3.2 108 6 Accessories: Order as separate catalog number. ELA WG3 Wireguard (back mount only) 1 ELA LED M12 Single remote lamp 2,3 ELA LED T M12 Double remote lamp 2,3 ELA LED WP M12 Single, weather-proof remote lamp 2,3 ELA LED T WP M12 Double, weather-proof remote lamp 2,3 Notes 1 See spec sheet ELA-WG. 2 See spec sheet LED-Remote Lamps. 3 Only available with HO option. 2” (5.2) 4-1/2” (11.4) 9” (22.9) 8” (20.3) 20” (50.8) 12” (30.5) All dimensions are inches (centimeters). Shipping weight: 3.6 lbs. (1.6 kgs.). ECR LED

Upload: others

Post on 16-Aug-2020

1 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: FEATURES & SPECIFICATIONS Integrated Exit-Unit Combo€¦ · 20 87 78 68 60 54 48 43 39 35 32 30 87 75 64 55 48 42 37 33 29 27 24 87 73 60 51 43 37 32 28 25 23 20 83 74 66 58 52 46

CONTRACTOR SELECT / EMERGENCY LED-EXIT-UNIT-COMBOS

Catalog Number

Notes

Type

ORDERING INFORMATION

Contractor Select

LED Exit/Unit Combos

FEATURES & SPECIFICATIONSINTENDED USE

Combination emergency lighting unit and exit. Suitable for illuminating the path of egress and for marking the means of egress in accordance with Life Safety Code NFPA 101.

CONSTRUCTION

Injection-molded, flame-retardant, high-impact, thermoplastic housing with snap-fit design components for easy installation. Universal J-box pattern. Universal chevrons are easily removed for directional indication. Fully assembled single face with extra faceplate for easy field-conversion to double face. Track and swivel arrangement permits full range of lamp adjustment.

Letters 6" high with 3/4" stroke, with 100 ft viewing distance rating, based on UL924 standards.

OPTICS

The typical life of the LED lamp is 10 years. Two 1W LED lamps for emergency light.

ELECTRICAL

Dual-voltage input 120V or 277V AC; 9.6V output. Emergency combo provided with test switch, status indica-tor and rechargeable battery. Maintenance-free nickel-cadmium battery provides 90 minutes of emergency power. High output (HO) option provides 3W of remote capacity, which powers up to three ELA LED lamps.

LISTINGS

UL Listed. Meets UL 924, NFPA 101, NFPA 70-NEC and OSHA illumination standards. Indoor damp location 32°F to 122°F (0°C to 50°C) listed standard.

WARRANTY

Fixtures are covered by Lithonia Lighting 24-month warranty against mechanical defects in manufacture.

All life safety equipment, including emergency lighting for path of egress must be maintained, serviced, and tested in accordance with all National Fire Protection Association (NFPA) and local codes. Failure to perform the required maintenance, service, or testing could jeopardize the safety of occupants and will void all warranties.

Note: Specifications subject to change without notice.

Actual performance may differ as a result of end-user environment and application.

Standard Catalog Supply Input Pallet Carton Number UPC Description Voltage Wattage Qty. Qty.

ECR LED M6 784231874516 Red 120/277 3.8 108 6

ECG LED M6 784231874592 Green 120/277 3.2 108 6

ECR LED HO M6 784231874561 Red, high output 120/277 3.8 108 6

ECG LED HO M6 784231874615 Green, high output 120/277 3.2 108 6

Accessories: Order as separate catalog number.

ELA WG3 Wireguard (back mount only)1

ELA LED M12 Single remote lamp2,3

ELA LED T M12 Double remote lamp2,3

ELA LED WP M12 Single, weather-proof remote lamp2,3

ELA LED T WP M12 Double, weather-proof remote lamp2,3

Notes1 See spec sheet ELA-WG.

2 See spec sheet LED-Remote Lamps.

3 Only available with HO option.

11 5/8 ”

7 3/16 ”

1 5/8 ”

Integrated Exit-Unit Combo

12-5/8”(32.1)

8”(20.3)

4-3/8”(11.1)

5-3/8”(13.7)

1-7/8”(4.8)

LED Unit

LED Combo

LED Exit

15 (38.1)

3-3/4(9.5)

5-3/8 (13.7)

12 (30.5)

3-3/4(9.5)

2(5.1)

2”(5.2)

4-1/2”(11.4)

9”(22.9) 8”

(20.3)

20”(50.8)

12”(30.5)

All dimensions are inches (centimeters). Shipping weight: 3.6 lbs. (1.6 kgs.).

ECR LED

Page 2: FEATURES & SPECIFICATIONS Integrated Exit-Unit Combo€¦ · 20 87 78 68 60 54 48 43 39 35 32 30 87 75 64 55 48 42 37 33 29 27 24 87 73 60 51 43 37 32 28 25 23 20 83 74 66 58 52 46

LED-EXIT-UNIT-COMBOS

CONTRACTOR SELECT / EMERGENCY: One Lithonia Way Conyers, GA 30012 Phone: 800.334.8694 Fax: 770-981-8141 www.lithonia.com © 2009-2014 Acuity Brands Lighting, Inc. All rights reserved. 10/27/14

Emergency LED Exit/Unit Combos

Page 3: FEATURES & SPECIFICATIONS Integrated Exit-Unit Combo€¦ · 20 87 78 68 60 54 48 43 39 35 32 30 87 75 64 55 48 42 37 33 29 27 24 87 73 60 51 43 37 32 28 25 23 20 83 74 66 58 52 46

CONTRACTOR SELECT / EMERGENCY LED-UNITS

Catalog Number

Notes

Type

ORDERING INFORMATION

All dimensions are inches (centimeters) unless otherwise indicated.

FEATURES & SPECIFICATIONSINTENDED USE

Suitable for emergency lighting applications such as stairways and hallways.

CONSTRUCTION

Injection-molded, flame-retardant, high-impact, thermoplastic housing with snap-fit design components with LED lamps for easy installation. Universal J-box pattern. Track and swivel arrangement permits full range of lamp adjustment.

OPTICS

The typical life of the LED is 10 years. Two 1.8W LED lamps for emergency light.

ELECTRICAL

Dual-voltage input 120V or 277V AC. Emergency unit provided with test switch, status indicator and rechargeable battery. Maintenance-free nickel-cadmium battery provides 90 minutes of emergency power.

LISTINGS

UL Listed. Meets UL 924, NFPA 101, NFPA 70-NEC and OSHA illumination standards. Damp location 32°F to 122°F (0°C to 50°C) listed standard.

WARRANTY

Fixtures are covered by Lithonia Lighting 24-month warranty against mechanical defects in manufacture.

Complete warranty terms located at www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx

All life safety equipment, including emergency lighting for path of egress must be maintained, serviced, and tested in accordance with all National Fire Protection Association (NFPA) and local codes. Failure to perform the required maintenance, service, or testing could jeopardize the safety of occupants and will void all warranties.

Actual performance may differ as a result of end-user environment and application.

Note: Specifications subject to change without notice.

Standard Catalog Supply Input Pallet Carton Number UPC Description Voltage Wattage1 Qty. Qty.

EU2 LED M12 784231874493 Emergency lighting unit 120/277 1.8 324 12

Notes:1 Per lamp head.

2 See spec sheet ELA-WG.

Contractor Select

LED UNITSLED Lamps

Accessories: Order as separate items.

ELA WG1 Wireguard (back mount only)2

Weight: 4 lbs. (1.82 kgs.).

10-1/8

3-3/4(9.5)

5-3/8 (13.7)

14-5/8

3-3/4(9.5)

2(5.1)

All configurations of this product are considered "standard" and have short lead times.

Page 4: FEATURES & SPECIFICATIONS Integrated Exit-Unit Combo€¦ · 20 87 78 68 60 54 48 43 39 35 32 30 87 75 64 55 48 42 37 33 29 27 24 87 73 60 51 43 37 32 28 25 23 20 83 74 66 58 52 46

LED-UNITS

CONTRACTOR SELECT / EMERGENCY: One Lithonia Way Conyers, GA 30012 Phone: 800.334.8694 Fax: 770-981-8141 www.lithonia.com © 2011-2014 Acuity Brands Lighting, Inc. All rights reserved. Rev. 09/11/14

Emergency LED Units

Page 5: FEATURES & SPECIFICATIONS Integrated Exit-Unit Combo€¦ · 20 87 78 68 60 54 48 43 39 35 32 30 87 75 64 55 48 42 37 33 29 27 24 87 73 60 51 43 37 32 28 25 23 20 83 74 66 58 52 46

FLUORESCENT: PM2-2X4 2LP

Catalog Number

Notes

Type

ORDERING INFORMATION For shortest lead times, configure product using standard options (shown in bold). Example: 2PM2 G B 3 32 18LD MVOLT 1/3 GEB10IS

All dimensions are inches (centimeters).

FEATURES & SPECIFICATIONSINTENDED USE — Louvered parabolic luminaires for optical control in general office environments and open spaces.

ATTRIBUTES — Designed for T8 lamps and electronic ballasts.

CONSTRUCTION — Black reveal provides floating louver appearance, conceals optional air supply slots.

Integral T-bar safety clips hold T-bar securely; no fasteners required to install.

Overlapping flange and modular ceiling trims factory-installed with standard swing-gate hangers or field convertible with optional trim and hangers.

Heavy-gauge hinges die-formed for maximum strength. Latches spring-loaded, concealed in reveal.

Optional heat-removal dampers and air closure strips to control airflow.

Housing formed from cold-rolled steel. Louvers formed from anodized aluminum. No asbestos is used in this product.

FINISH — Five-stage iron-phosphate pretreatment ensures superior paint adhesion and rust resistance. Painted parts finished with high-gloss, baked white enamel.

ELECTRICAL SYSTEM — Thermally-protected, resetting, Class P, HPF, non-PCB, UL Listed, CSA certified ballast is standard. Energy-saving and electronic ballasts are sound rated A. Standard combinations are CBM approved and conform to UL 935.

Fixture conforms to UL 1570 and is suitable for damp locations. AWM, TFN or THHN wire used throughout, rated for required temperatures.

LISTING — UL Listed (standard). CSA Certified or NOM Certified (see Options).

WARRANTY — 1-year limited warranty. Complete warranty terms located at www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspxActual performance may differ as a result of end-user environment and application. Note: Specifications subject to change without notice.

PARAMAX® Parabolic Troffer

PM2 2'X4'2" DEEP LOUVER

Specifications

Length: 48 (121.8)

Width: 24 (60.9)

Depth: 4-1/2 (11.4)

Notes1 MVOLT standard for 120V and 277V applications, some options require voltage specified.2 Must specify voltage.3 Only available with 3-lamp 18 and 24 cell versions.

2PM2 32

Series Trim type Air functionNumber of lamps Lamp type

Number of cells Finish Voltage Options

2PM2 Paramax 2" deep cell parabolic, 2' wide

G GridF Overlapping

flangeMT Modular

fit-in ST Screw slot

A Air supply/return (slots in side trim)

H Heat removal (through lamp cavity, dampers available)

D Combination A & H

B Static (no air function, matching appearance)

234Not included

32 32W T8 (48")

1216182432

LD Low iridescent anodized diffuse silver

LS Low iridescent anodized specular silver

120277347MVOLT1

Others available

GEB10IS Electronic ballast, <10% THD, instant startGEB10RS Electronic ballast, <10% THD, rapid startEL Emergency battery pack (nominal 300

lumens) 2

EL14 Emergency battery pack (nominal 1400 lumens) 2

GLR Internal fast-blow fuse 2

GMF Internal slow-blow fuse 2

LST Tandem fixture pairs (shared ballasts)PWS1836 6' prewire, 3/8" diameter, 18-gauge,

1 circuitPWS1846 6' prewire, 3/8" diameter, 18-gauge,

2 circuitsLP__ Lamped, specify lamp type and colorAPB Air-pattern control blades (A & D models only)ACS Air closure strips (A & D models only)PAF Painted after fabrication (white enamel)CSA Listed and labeled to comply with Canadian

standardsNOM Listed and labeled to comply with Mexican

standardsJP Palletized and stretch-wrapped, GT and

MT trim only2R Two reflector channel covers3

Page 6: FEATURES & SPECIFICATIONS Integrated Exit-Unit Combo€¦ · 20 87 78 68 60 54 48 43 39 35 32 30 87 75 64 55 48 42 37 33 29 27 24 87 73 60 51 43 37 32 28 25 23 20 83 74 66 58 52 46

PM2-2X4 2LP

FLUORESCENT: One Lithonia Way Conyers, GA 30012 Phone:770.922.9000 Fax: 770-918-1209 www.lithonia.com ©1995-2014 Acuity Brands Lighting, Inc. All rights reserved. Rev. 07/30/14

All dimensions are inches (centimeters).

PM2 2'x4' 2" Louver Family

MOUNTING DATAContinuous row mounting of flanged units requires CRE and CRM trim options (see Options).

DIMENSIONS

Notes1 Recommended rough-in dimensions for F trim fixtures 24"x24" (Tolerance is +1/4", -O”).

Swing-gate range 1" to 4-3/16", span 23-1/2" to 26-5/16".

PHOTOMETRICSCalculated using the zonal cavity method in accordance with IESNA LM41 procedures. Floor reflectances are 20%. Lamp configurations shown are typical. All data based on 25°C. Full photometric data on these and other configurations available upon request.

Ceiling type Appropriate trim type

Exposed grid teeConcealed grid teeConcealed Z-splineMetal pan (consult factory)Screw slot (consult factory)Acoustical tile, plaster or plasterboard on rigid support parallel to lamps

GG,STF, MT

MTSTF

4-1/2(11.4)

24(60.9)

2(5.1)

3-1/2(8.9)

4-1/2(11.4)

24(60.9)

2(5.1)

3-1/2(8.9)

4-1/2(11.4)

4-1/2(11.4)

24(60.9)

2(5.1)

3-1/2(8.9)

24(60.9)

2-13/16(7.1)

3-1/2(8.9)

3” end blade depthx-x/x” width blade depth

Coefficients of Utilization%02fp

pc 80% 70% 50%pw 50% 30% 10% 50% 30% 10% 50% 30% 10%

RC

R

012345678910

8979706255494439363330

8976655648423733302724

8974615143373228252320

8778686054484339353230

8775645548423733292724

8773605143373228252320

8374665852464238343229

8372625447413632292624

8370595043373228252220

Zonal Lumen SummaryZone Lumens % Lamp % Fixture

0° - 30°0° - 40°0° - 60°0° - 90°

90° - 180°0° - 180°

1158.81956.13732.84266.2

0.04266.2

20.334.365.574.80.074.8

27.245.987.5100.00.0

100.0

TEST NO: LTL15452LUMINAIRE CATALOG NO.: 2PM2 G B 2 32 12LD MVOLT GEB10ISLUMENS PER LAMP: 2850

Coefficients of Utilization%02fp

pc 80% 70% 50%pw 50% 30% 10% 50% 30% 10% 50% 30% 10%

RC

R

012345678910

8576676053484339363330

8573635447423733302725

8571595043373329262321

8374665952474238353230

8372625447413733292724

8370595043373229262321

7971635650454137343129

7970605246403632292624

7968574942373228252321

Zonal Lumen SummaryZone Lumens % Lamp % Fixture

0° - 30°0° - 40°0° - 60°0° - 90°

90° - 180°0° - 180°

1841.63138.95340.76115.1

0.06115.1

21.536.762.571.50.071.5

30.151.387.3100.00.0

100.0

TEST NO: LTL15454LUMINAIRE CATALOG NO.: 2PM2 GB 3 32 18LD MVOLT GEB10ISLUMENS PER LAMP: 2850

Coefficients of Utilization%02fp

pc 80% 70% 50%pw 50% 30% 10% 50% 30% 10% 50% 30% 10%

RC

R

012345678910

7870625549444036333128

7868585144393531282523

7866554740353127242220

7769615449444036333028

7767585044393431282523

7765554640353027242220

7366595247423835322927

7364564943383430272523

7363534639343027242220

Zonal Lumen SummaryZone Lumens % Lamp % Fixture

0° - 30°0° - 40°0° - 60°0° - 90°

90° - 180°0° - 180°

2427.23951.36685.17504.7

0.07504.7

21.334.758.665.80.065.8

32.352.789.1100.00.0

100.0

TEST NO: LTL15455LUMINAIRE CATALOG NO.: 2PM2 GB 4 32 32LD MVOLT GEB10ISLUMENS PER LAMP: 2850

Page 7: FEATURES & SPECIFICATIONS Integrated Exit-Unit Combo€¦ · 20 87 78 68 60 54 48 43 39 35 32 30 87 75 64 55 48 42 37 33 29 27 24 87 73 60 51 43 37 32 28 25 23 20 83 74 66 58 52 46

Catalog Number

Notes

Type

ORDERING INFORMATION

Contractor Select

Remote Lamps

All dimensions are inches (centimeters). Shipping weight: 3.6 lbs. (1.6 kgs.).

FEATURES & SPECIFICATIONSINTENDED USE

Single and twin remote lamps for indoor and outdoor applications.

CONSTRUCTION

For use as part of an emergency lighting system, providing light for path of egress. Weather-proof (WP) versions are sealed for use in damp and wet location areas requiring remote lighting.

Fully adjustable lamp heads.

OPTICS

5.4W heads, to be powered by 6V battery equipment.

WARRANTY

Fixtures are covered by Lithonia Lighting 24-month warranty against mechanical defects in manufacture. All life safety equipment, including emergency lighting for path of egress must be maintained, serviced, and tested in accordance with all National Fire Protection Association (NFPA) and local codes. Failure to perform the required maintenance, service, or testing could jeopardize the safety of occupants and will void all warranties.

Note: Specifications subject to change without notice.

Actual performance may differ as a result of end-user environment and application.

Standard Catalog Pallet Carton Number UPC Description Voltage Wattage1 Qty. Qty.

ELA 6CS M12 745974624820 Single remote lamp 6 5.4 384 12

ELA T 6CS M12 745974624929 Double remote lamp 6 5.4 240 12

ELA 6CS WP M12 745975331796 Single, weather-proof remote lamp 6 5.4 144 12

ELA T 6CS WP M12 745974624950 Double, weather-proof remote lamp 6 5.4 144 12

ELA 6CS ELA T 6CS ELA 6CS WP ELA T 6CS WP

Notes

1 Per lamp head.

ELA 6CS ELA T 6CS

ELA T 6CS WPELA 6CS WP

11(27.9)

5(12.7)

5(12.7)

6-1/2(16.5)

8-1/2(21.6)

6-1/2(16.5)

8(20.3)

11(27.9)

REMOTE_LAMPS

CONTRACTOR SELECT / EMERGENCY: One Lithonia Way Conyers, GA 30012 Phone: 800.334.8694 Fax: 770-981-8141 www.lithonia.com © 2009-2015 Acuity Brands Lighting, Inc. All rights reserved. Rev. 11/12/15

Page 8: FEATURES & SPECIFICATIONS Integrated Exit-Unit Combo€¦ · 20 87 78 68 60 54 48 43 39 35 32 30 87 75 64 55 48 42 37 33 29 27 24 87 73 60 51 43 37 32 28 25 23 20 83 74 66 58 52 46

PRODUCT DATA

NightLight High LevelNightLight Off

Leviton Mfg. Co., Inc. Lighting & Energy Solutions201 N. Service Rd. Melville, NY 11747-3138 Tech Line: 1-800-824-3005 Fax: 1-800-832-9538 www.leviton.com/les© 2012 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change without notice.

OS

S10

Decora® Wall Switch PIR Vacancy Sensor with LED NightLight

BASIC OPERATIONThe passive infrared (PIR) vacancy sensor detects motion from a heat-emitting source within its field-of-view to automatically switch lights OFF, offering the same performance features as the ODS family of occupancy sensors. OSS10 has the ability to reduce (dim) and turn off the “Guide Light” function with a simple dial setting. The LED NightLight consumes less than 1/2 W providing energy savings and guide lighting when room lights are off.

APPLICATIONSOSS10 is perfect for use in hospitality and health care facilities with night light feature to guide to manual-ON. The adjustable time delay settings of 30 seconds to 30 minutes will automatically turn lights OFF.

The NightLight Occupancy Sensor Wall Switch can be used to provide automatic lighting control for energy savings and convenience in a variety of commercial applications, including:

•  Hotel & Hospital restrooms •  Conference rooms  •  Classrooms•  Small offices  •  Lounges•  Storage areas  •  Bathrooms

FEATURES• Fits  in  standard  wallbox  and  replaces  single-pole 

wall switch; ground and neutral connection required. Gangable with other units

• Low-profile design eliminates obtrusive “scanning-device” look. Elegant Decora wallplates complement any interior for sleek aesthetics; uses Decora wall-plates and coordinates with Leviton’s popular line of Decora wiring devices

• 180° field-of-view provides approximately 2100 SF of coverage

• Convenient  pushbutton  provides  manual-ON/OFF light switching at any time

• Two dual element PIR sensors used to widen detec-tion range and double the detection points within the FOV

• Segmented Fresnel lens provides optimum sensitivity and performance. Designed with an extensive “minor motion” area where even slight body movements will be detected

LEDREADY™

OPTIMAL LED DESIGN Exclusive LED High Inrush Stability (H.I.S.) circuitry designed to handle the high inrush electronic ballast loads of today’s LED lighting and offer unmatched durability and service. Our true Zero-Cross Relay switches are at the zero crossing point of the AC power curve, ensuring maximum contactor life and compatibility with LED ballasts. Leviton Occupancy and Vacancy Sensors are the premiere choice for LED compatibility.compatibility.

Page 9: FEATURES & SPECIFICATIONS Integrated Exit-Unit Combo€¦ · 20 87 78 68 60 54 48 43 39 35 32 30 87 75 64 55 48 42 37 33 29 27 24 87 73 60 51 43 37 32 28 25 23 20 83 74 66 58 52 46

PRODUCT DATAO

SS

10

FEATURES CONT.• Patented  blinders  -  horizontal  field-of-view  may  be adjusted between 180° and 60° of arc by using  inte-gral blinders located on either side of the lens. No masking tape required

• Manual-ON/auto-OFF mode for installations where manual-ON switching is required but auto-OFF switching is still desired for CEC Title 24, Title 20 and NY L48 energy savings

• To comply with T24/20, red LED indicator light flashes when sensor detects motion to verify detection is active.

•  Time  Delay  adjustment  for  delayed-OFF  time  set-tings of 30 seconds (for walking test), 10 minutes, 20 minutes, and 30 minutes. Allows customized adjust-ments to maximize energy savings.

• Vacancy confirmation - when the time out expires and the relays turn OFF, a 30 second vacancy confirmation exists to turn the relays back ON

• False detection circuitry• LED NightLight offers “Guide Light” functionality• Adjustable NightLight illumination setting for continu-

ous or dimmed NightLight• NightLight Mode - the factory default setting for the 

NightLight Mode is Dimmed Mode. This means the NightLight will automatically dim to 5% of full bright-ness after 2 minutes of no occupancy when activated by the internal light sensor

• One unit can be used for 120V through 277V lighting. Compatible  with  both  electronic  and  magnetic  bal-lasts

FIELD OF VIEWThe OSS10 provides a 180° field of view with a maxi-mum  coverage  area  of  approximately  2100  square feet.  The  maximum  sensing  distance  in  front  of the sensor  is 40 feet, and at each side  is 30 feet. A “minor-motion” zone detects relatively small body movements and allows the lights to stay ON even though a person may not be moving or walking around the room. The remainder of the field of view, the “major-motion” zone, exhibits a  lesser degree of sensitivity and requires larger movements.

INSTALLATION The OSS10 is preset to deliver optimum performance in a wide variety of applications without requiring any adjustments during installation. The unit may replace a single-pole wall switch mounted in a standard wall box. The unit must have a neutral and be prop-erly grounded in order to operate. The unit’s integral blinders may be used to restrict the field-of-view to prevent unwanted detection of hallway traffic. It should be positioned at least 6 feet away from HVAC registers. Note that whenever the unit is powered up, it will  take  approximately  1 minute  to begin normal operation.

OSS10 Wall Switch Occupancy Sensor Wiring Diagram, Single Location Control

Black (Hot)

Neutral (White)

Load

OSSNL/OSS10

Black Black

White

White

Blue

GreenGround

Line120-230-277VAC, 50/60Hz

TOP VIEW

SIDE VIEW

ODSXX-ID

15 400

0

15

15

30

30

40

40

4

Minor Motion, IR

Major Motion, IR

5

0

TOP VIEW

SIDE VIEW

ODSXX-ID

15 400

0

15

15

30

30

40

40

4

Minor Motion, IR

Major Motion, IR

5

0

Page 10: FEATURES & SPECIFICATIONS Integrated Exit-Unit Combo€¦ · 20 87 78 68 60 54 48 43 39 35 32 30 87 75 64 55 48 42 37 33 29 27 24 87 73 60 51 43 37 32 28 25 23 20 83 74 66 58 52 46

Leviton Mfg. Co., Inc. Lighting & Energy Solutions201 N. Service Rd. Melville, NY 11747-3138 Tech Line: 1-800-824-3005 Fax: 1-800-832-9538 www.leviton.com/les© 2012 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change without notice.

OS

S10

Vandal Resistant

Lens withPIR and LEDNight Light

LED Indicator

and LightSensor

PatentedBlinders

Control PanelCover

Pushbutton

1.75 (44.4 mm)

1.30(33.0 mm)

2.61

(66.

3 m

m)

4.06

(103

.2 m

m)

0.48 (12.6 mm)

1.35 (34.4 mm)

2.60

(66.

2 m

m)

Dimensions Night Light

OSS10 Sensor Features

T IM E ON MODE/NL DIMRANGE

4 7

10

Blinder adjustment levers

BLINDERS

Control Panel Cover

10M

30S

20M

30M MIN MAX

DIAGRAMS

Page 11: FEATURES & SPECIFICATIONS Integrated Exit-Unit Combo€¦ · 20 87 78 68 60 54 48 43 39 35 32 30 87 75 64 55 48 42 37 33 29 27 24 87 73 60 51 43 37 32 28 25 23 20 83 74 66 58 52 46

PRODUCT DATA

LEVITON SPECIFICATION SUBMITTAL

JOB NAME:                                                                    CATALOG NUMBERS:JOB NUMBER:

G-8943/J12-tb

Leviton Manufacturing Co., Inc. Global Headquarters201 N. Service Rd. Melville, NY 11747-3138 • Tech Line: 1-800-824-3005 Fax: 1-800-832-9538

Leviton Manufacturing Co., Inc. Lighting & Energy Solutions20497 SW Teton Avenue, Tualatin, OR 97062 • Tel: 1-800-736-6682 • Fax: 503-404-5594 • Tech Line (6:00AM-4:00PM P.S.T. Mon-Fri): 1-800-959-6004

Leviton Manufacturing of Canada, Ltd.165 Hymus Boulevard, Pointe Claire, Quebec H9R 1E9 • Telephone: 1-800-469-7890 • FAX: 1-800-563-1853

Leviton S. de R.L. de C.V.Lago Tana 43, Mexico DF, Mexico CP 11290 • Tel. (+52) 55-5082-1040 • FAX: (+52) 5386-1797 • www.leviton.com.mx

Visit our Website at: www.leviton.com/les© 2012 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change without notice.

OS

S10

CAT. NO. * DESCRIPTION

OSS10-INx Vacancy Sensor Wall Switch with NightLight

ORDERING INFORMATION

SPECIFICATIONS

ELECTRICAL

Line Voltage 120-230-277VAC

Power Consumption

120V, Nightlight OFF - 190mW 120V, Nightlight ON max - 350mW 277V, Nightlight OFF - 250mW 277V, Nightlight ON max - 410mW

Operational Frequency

60Hz 

Wire Designation

Line - Black Load - BlueGround - GreenNeutral - White

Load Rating Fluorescent: 1200VA @ 120V, 2700VA @ 277V   Incandescent: 800W @ 120V,  Motor – 1/8 HP @ 120V

ENVIRONMENTAL

Operating Temperature Range

32° to 122°F  (0°C to 50°C)

Storage Temperature Range

14°F to 185°F  (-10°C to 85°C)

Relative Humidity 20% to 90% non-condensing

OTHER

Listings UL/cUL Certified, NOM CEC Title 24, Title 20 and NYC L48 Compliant, FCC Compliant

Warranty Limited Five-Year Warranty

To indicate color, add suffix to the end of the catalog number.  White (-W) , Ivory (-I)Black (-E)  *NAFTA compliant and Made in USA models available.