fe peexam rev 1
TRANSCRIPT
-
7/30/2019 FE PEexam Rev 1
1/18
Reviewing for Professional Engineering Exams 110/16/10 Rev. 1.2
Professional Engineering Exam Review
Jeffrey J. Burchill, P.E.
Reviewing forFE (Fundamentals of Engineering)
PE (Principals and Practice)Exams
-
7/30/2019 FE PEexam Rev 1
2/18
Reviewing for Professional Engineering Exams 210/16/10 Rev. 1.2
Terms and Organizations
EIT Engineer in Training
FE Fundamentals of Engineering PE Professional Engineer
P&P Principles and Practice
NCEES (National Council of Examiners for Engineering and Surveying)*
- Creates exam content
OP (Office of the Professionals for New York State)*- Jurisdiction and Licensing of Professional Engineers
NSPE (National Society of Professional Engineers)*- Voice and advocate of Licensed Professional Engineers
PPI (Professional Publications Inc.)*- Review materials
* Contact information provided at end.
-
7/30/2019 FE PEexam Rev 1
3/18
Reviewing for Professional Engineering Exams 310/16/10 Rev. 1.2
Application to New York State
Forms
- Form 1 : Registration (All)- Form 2 : Certification of Professional Education (All)
- Form 3 & 4 if needed for experience (FE)
- Form 3 ,4, 4A : Report of Professional Experience (PE)
Deadlines- Must be postmarked by November 1st for April exams- Must be postmarked by May 1st for October exams
Fees to New York State
- $70 (FE)- $377 (PE)
Additional fee to test administrator (Castle)
Information and forms available on NYS OP website
-
7/30/2019 FE PEexam Rev 1
4/18
Reviewing for Professional Engineering Exams 410/16/10 Rev. 1.2
Calculators
What is the calculator policy? What calculators may I bring
to the exam?Only models of calculators approved by NCEES are permitted in the exam
room. No other models of calculators or variations of the models listed beloware permitted in the exam room.
Please check NCEES website for the calculators allowed in the exam!
Each year, NCEES will review and revise the approved calculator list and then
announce the updated list by November 15.
-
7/30/2019 FE PEexam Rev 1
5/18
Reviewing for Professional Engineering Exams 510/16/10 Rev. 1.2
The PencilOnly NCEES-supplied marking and erasing instruments are permitted for use in the
examination room. Mechanical pencils will be provided. Each pencil has an eraser and is
preloaded with three pieces of 0.7-mm HB lead. This is the only writing instrumentallowed. Candidates may NOT bring lead or erasers. If necessary, proctors will issue
additional pencils to examinees during the exam. - NCEES
-
7/30/2019 FE PEexam Rev 1
6/18
Reviewing for Professional Engineering Exams 610/16/10 Rev. 1.2
Fundamentals of Engineering (FE) Exam
Exam tests knowledge of subject matter covered in
EAC/ABET accredited baccalaureate engineeringcurriculum.
Exam specifications on NCEES website:
- Morning 4hrs. Mathematics, Statistics, Chemistry, Economics, etc.
- Afternoon 4hrs.
Choice ofGeneral orD i s c i p l i n e specific exam
- 180 multiple choice questions
120 questions in the morning
60 questions in the afternoon
- Closed book, only NCEES reference book is allowed.
-
7/30/2019 FE PEexam Rev 1
7/18
Reviewing for Professional Engineering Exams 710/16/10 Rev. 1.2
Choice: General vs. Discipline Specific
FE Exam Choices:- Other/General Engineering exam: Similar subject matter
as morning exam, problems are more in-depth
- Discipline specific exam: review discipline subject matter
Civil
Chemical
Mechanical
Electrical Environmental
Industrial
-
7/30/2019 FE PEexam Rev 1
8/18
Reviewing for Professional Engineering Exams 810/16/10 Rev. 1.2
General vs. Discipline Specific (Afternoon)
Personal choice:- If you are recently out of school, general exammay be easier
- If you have been working, discipline specific exam
may be easier
-
7/30/2019 FE PEexam Rev 1
9/18
Reviewing for Professional Engineering Exams 910/16/10 Rev. 1.2
Recommended Study Materials - FE
NCEES Reference Manualdownload .PDF or paperFE Review manual
Discipline - Specific (Afternoon)General Engineering (Afternoon)
C i v i l , E n v i r o n m e n t a l , C h e m i c a l , M e c h a n i c a l ,
E l e c t r i c a l, In d u s t r i a l
NCEES Sample questions & solutions
NCEES Sample questions &
solutions (discipline-specific)
Discipline-Specific
Review Manual
OR
+
+
-
7/30/2019 FE PEexam Rev 1
10/18
Reviewing for Professional Engineering Exams 1010/16/10 Rev. 1.2
Principals and Practice (PE) ExamThe Principles and Practice exams test academic
knowledge and knowledge gained in engineeringpractice.
Exam specifications on NCEES website
- Morning exam 4hrs
Breadth
- Afternoon exam 4hrs
Depth: Subject choice for Civil, Mechanical, Electricaldisciplines
- 80-100 questions multiple choice
- Open book, check with local jurisdiction if in doubtabout what reference material is allowed
-
7/30/2019 FE PEexam Rev 1
11/18
Reviewing for Professional Engineering Exams 1110/16/10 Rev. 1.2
PE Exam Overview
Knowledge of codes/design standards is needed.
- Check exam specifications for codes/design standards
- Check NCEES website for correct versions
Not all questions require calculations.
- Example: Why is A better than B ?
Unnecessary information may be included
in the questions.
Engineering judgment is needed.
-
7/30/2019 FE PEexam Rev 1
12/18
Reviewing for Professional Engineering Exams 1210/16/10 Rev. 1.2
Recommended Study Materials - PE
Practice Problems Sample Exam
S e l ec t a p p r o p r i a t e d i s c i p l i n e : C i v i l , E n v i r o n m e n t a l , C h e m i c a l , M e c h a n i c a l , El e c t r i c a l , In d u s t r i a l
NCEES Sample
questions & solutionsReference Manual
S e l ec t a p p r o p r i a t e C o d e s a n d S t a n d a r d s n e e d e d : R e fe r t o N C E E S w e b s i t e f o r d e t a i l s
-
7/30/2019 FE PEexam Rev 1
13/18
Reviewing for Professional Engineering Exams 1310/16/10 Rev. 1.2
Follow the review course schedule
- Review before class, this can help to get more from the session.
Work as many problems as possible
- Work the problem, dont just read it.
Study as many subject areas as possible from the exam
specifications, this will increase chances for success.
Use calculator of choice when working problems
- There will not be time on the exam to become familiar with a calculator.
Take a timed practice exam
Exam Study Strategies
-
7/30/2019 FE PEexam Rev 1
14/18
Reviewing for Professional Engineering Exams 1410/16/10 Rev. 1.2
Study Strategies (Reference Material)
Use NCEES reference manual when working problems
- This is the only reference allowed in the exam, become familiar with it.- A fresh copy will be provided at the exam.
Use reference materials when working problems- Organize and work with your references, codes and design standards
- Have a good index to quickly look up subjects in your reference books
FE Reference Handbook
Applicable codes and standardsReference materials - reference
manual, text books, worked problems, etc.
+
-
7/30/2019 FE PEexam Rev 1
15/18
Reviewing for Professional Engineering Exams 1510/16/10 Rev. 1.2
Exam StrategiesRead the problem carefully, what is being asked?
Time:- FE exam
2 minutes/problem (morning)
4 minutes/problem (afternoon)
- PE exam
6 minutes/problem
Watch your time
- If the problem seems to be taking too much time, you may bereading too deep into it or taking the wrong approach.
There is no penalty for guessing- If you cannot get a correct answer, guess, circle the question
and return to it if time permits.
Watch units and conversions
- All answers may seem reasonable.
-
7/30/2019 FE PEexam Rev 1
16/18
Reviewing for Professional Engineering Exams 1610/16/10 Rev. 1.2
Scoring and Pass Rates
NCEES committee determines score to be minimally
competent No set number to Pass or Fail the exam
12 weeks to get results from New York State
P A S S orFAIL grade is issued
- In the event of a FAIL grade a diagnostic report will be issued
Examination First-time takers Repeat takers
PE Chemical 72% 46%
PE Civil 64% 35%PE Electrical and Computer 66% 29%
PE Environmental 73% 23%
PE Mechanical 69% 41%
PE Structural I 46% 25%
PE Structural II 63% 29%
ExaminationModule
First-timetakers
Repeattakers
Chemical 86% 46%
Civil 75% 33%
Electrical 72% 27%
Environmental 82% 38%
Industrial 69% 33%
Mechanical 83% 34%
General 78% 32%
FE Exam (April 2010) PE Exam (April 2010)
Exam Pass Rates
-
7/30/2019 FE PEexam Rev 1
17/18
Reviewing for Professional Engineering Exams 1710/16/10 Rev. 1.2
Summary Paperwork and Deadlines for New York State
Determine what to study:- FE exam, general or discipline specific?- PE exam, depth within discipline?
Acquire study materials
Follow review course schedule Study as many subject areas as possible Use reference materials when studying Take a timed practice exam
STUDY and you will be successful!
Questions?
-
7/30/2019 FE PEexam Rev 1
18/18
Reviewing for Professional Engineering Exams 1810/16/10 Rev. 1.2
Information
SUNY- ESFhttp://www.esf.edu/outreach.edu
National Council of Examiners of Engineering and Surveying
www.ncees.org
New York State Office of the Professionals
http://www.op.nysed.gov
Professional Publications Inc. (Review materials for exams)
http://ppi2pass.com/ppi/PPIShop
National Society of Professional Engineers
http://www.nspe.org