fcc statements instructions for hd video glasses moultrie … · 2020-02-07 · instructions for hd...

Instructions for HD Video Glasses

THANK YOU for your purchase of the HD Video Glasses. Please read this booklet before using the unit. If you should have any questions about this product or any other Moultrie product, please contact us using the information on the back of this booklet. Please register your glasses at www.moultriefeeders.com/warranty to activate your warranty.

www.moultriefeeders.com

06232015 / MCG-13039

PRADCO Outdoor Brands • 3280 Highway 31, Ste B • Calera, AL 35040

FCC Statements

Moultrie ProductsMCG-13039

Note: changes and modifications not expressly approved by the party responsible could void the user’s authority to operate this device.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT.

NOTE: This device complies with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this device does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.- lncrease the separation between the equipment and receiver.- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.- Consult the dealer or an experienced radio/TV technician for help.

HD Video Glasses

Micro SD Card Slot(card is pre-installed)

On/Off Button

Glasses Lens

Charging/RecordingLED Indicator

USB Port

Reset

RecordingLED Indicator

HD Video Glasses_Manual-ENGLISH_6-23-15.indd 1 6/23/15 2:14 PM

HD Video Glasses HD Video Glasses Page 11

Moultrie Limited WarrantyThis product has been thoroughly tested and inspected before shipment. It is guaranteed from defects in material and workmanship from the date of purchase for 1 year. Under this limited guarantee we agree to replace or repair free of charge any part or parts which have been found to be defective in original material or workmanship. Should you require in-warranty service, call our Customer Service Department. If your problem cannot be addressed over the telephone, we may need you to send us your defective product plus proof of purchase.

You must register your glasses at www.moultriefeeders.com/warranty to activate your 1-year warranty.

TroubleshootingPlease visit www.moultriefeeders.com/contact-us for troubleshooting and helpful tips.

Returns and RepairsPlease visit http://www.moultriefeeders.com/return-policy and complete the form or our Service Department will gladly answer any questions you have. Call 800-653-3334, Monday - Friday, 8:00 AM to 5:00 PM CST.

IMPORTANT INFORMATIONGWHAT’S INCLUDEDA

HD Video Glasses

Clear & Polarized Lenses

8GB Micro SD Card

USB Cable

Carry Case

Cleaning Cloth

User Manual

CHARGINGB

Please charge the product first if it could not be powered on at first use. The charging steps are as follows:

A. Please connect the glasses to a standard AC USB charger (output 5V 1A) via the included mini 5 pin USB cable and plug the charger into the 110v/220v power socket for charging. The Red LED indicator stays on while charging the glasses, the Red LED indicator will turn off and Green LED will stay on once the glasses is fully charged.

B. It is advised that you use our original charger or connect the glasses to PC via USB cable for recharging. For safety consideration, please don’t use charger with other specifications.


HD Video Glasses HD Video Glasses

OPERATING INSTRUCTIONSCWith only one Power ON/OFF button and one Reset button, the operation of this device is easy and convenient. Operating instructions are as follows:

1. Power ON & START Recording:Press the Power ON/OFF button for 2 seconds and both the green and blue LEDs will light up.The blue LED will then start to flash, indicating that the glasses are recording.

2. Power OFF & STOP Recording:Press the Power ON/OFF button for 2 seconds to stop recording. The glasses will save the recorded files and then turn off. If you don’t stop it manually, the glasses will keep on recording and saving one video file every 20 minutes. The glasses will stop recording automatically when in runs low on power or the micro SD card is filled.

(Note: If the glasses lose power or the micro SD card is filled, they will turn off automatically and the last video file may be less than 20 minutes.)

Page 10

SPECIFICATIONS (cont.)F

PC/Laptop System requirements:

CPU must be at least Pentium 2.0Ghz Dual-core or above

Operation system: Mac OSX10.7/Windows XP or above

4GB free hard disk memory or above

2GB RAM or above

Graphic displayer minimum 512M memory, support 1080P resolution or above



OPERATING INSTRUCTIONS (cont.)C

NOTE:

A. Please make sure that the glasses are powered OFF before removing the micro SD card to avoid damage to the glasses.

B. Make sure that the micro SD card has enough space before use. If not, delete some files or format the card with your computer to make sure there is enough space for recording.

C. If your glasses fail to respond, press the “RESET” button and restart the glasses.

D. If after pressing “RESET” the glasses fail to respond, let them fully recharge before using again.

Page 9

SPECIFICATIONSF

Resolution 1280 x 720P @ 30fpsImage sensor CMOS sensorProduct size 6.8” x 6.8” x 1.7” (unfolded)Power supply Embedded 550mAh Li-ion BatteryPower duration About 160 minutes Power Adaptor 5V DC / 1APower Consumption <0.6WMemory Support Max high speed 32 GB Micro SD card (CLASS 10 or above is required)Video Format M-JPEGWorking temp 23º – 104º FStorage temp -4º – 140º FPhysical weight 2 oz.USB 2.0 (HS)Player KM Player; Quick Time; RealPlayer, Window Media PlayerOperating System Win8, Win7, Windows XP, Mac OS 10.7 or above



3. Data Transmission:Ensure your glasses are powered OFF. Connect the glassed to your PC via the USB 2.0 port. Now you can start data transmission from the glasses to your PC.

4A. Set Date & Time (web, recommended):A. Connect the device to a PC, and type in the URL www.moultriefeeders.com/hd-video-glasses into your web browser. Use the “Set My Date & Time” button to automatically create the “setdate.txt” file. When prompted, save the file to your desktop. Simply drag this file onto your SD card to transfer the file and set your date and time.

4B. Set Date & Time (manual):A. Connect the device to a PC, and create a “ .txt” file named “setdate”;B. Open the new “setdate.txt” file and type a number like “20151108090828”, save the “setdate.txt “ file and exit to complete time setting;

The date format is: 2015 11 08 09 08 28 Year Month Date Hour Minutes Seconds Note: the camera time uses the 24-hour system.

C. Disconnect the glasses from PC and remove the USB cable. Press “Power ON/OFF” button to start the glasses to update the time setting.

OPERATING INSTRUCTIONS (cont.)C

Page 8

Status Green LED Blue LED Red LED

Power on Stay on Stay on 3 secs then flash Off

Power off Stay on 1 sec then off Stay on 1 sec then off Off

Recording Stay on Flash once per sec Off

Without SD card Stay on 30 secs then off Stay on 3 secs then off Off

Card is full Stay on 5 secs then off Stay on 5 secs then off

Low battery Flash 20 secs then off Flash 10 secs then off Off

Charging Stay on Off Stay on

Fully charged Stay on Off Off

LED INDICATOR STATUSE



SWAPPING LENSESDA. Loosen the lens on the sides to remove it. To do so, slightly press the lens into the direction of the arrow to release it from the groove. Next slightly lift the lens to the front.

B. Slightly press the lens into the direction of the arrow to release it from the groove. Next, slightly lift the lens to the front.

C. Remove the lens from the groove. Then you can remove the lens completely.

SWAPPING LENSES (cont.)D

A. To mount the lens, start by inserting it into the lower groove.

B. Fix the lens into the upper groove by pressing it against the glasses case.

C. Laterally fix the lens by pressing it into the direction of the arrow against the glasses case. Double-check that the lens seats properly in the groove and, if necessary, re-adjust and fix it.

Page 7

A AB

C CC C

BA A


fcc statements instructions for hd video glasses moultrie … · 2020-02-07 · instructions for hd...

Documents