fcc doc test report - shopmanda x5/certifications/fd990517d14.pdf · 4.1.6 eut operating conditions...
TRANSCRIPT
Report No.: FD990517D14 1 Report Format Version 3.0.2
FCC DoC TEST REPORT
REPORT NO.: FD990517D14
MODEL NO.: T510X, T511X
RECEIVED: May 17, 2010
TESTED: May 18 ~ 26, 2010
ISSUED: June 7, 2010
APPLICANT: CLEVO CO.
ADDRESS: No. 129, Hsing-Te Road, Sun Chung City 241, Taipei Hsien, Taiwan, R.O.C.
ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch
LAB LOCATION: No. 47, 14th Ling, Chia Pau Tsuen, Lin Kou Hsiang, Taipei Hsien 244, Taiwan
This test report consists of 55 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product certification, approval, or endorsement by TAF, NVLAP, NIST or any government agencies. The test results in the report only apply to the tested sample. The test results in this report are traceable to the national or international standards.
Report No.: FD990517D14 2 Report Format Version 3.0.2
Table of Contents 1 CERTIFICATION.............................................................................................. 3
2 SUMMARY OF TEST RESULTS...................................................................... 4 2.1 MEASUREMENT UNCERTAINTY................................................................... 4
3 GENERAL INFORMATION .............................................................................. 5 3.1 GENERAL DESCRIPTION OF EUT ................................................................ 5 3.2 DESCRIPTION OF TEST MODES .................................................................. 8 3.3 DESCRIPTION OF SUPPORT UNITS........................................................... 10
4 EMISSION TEST............................................................................................ 13 4.1 CONDUCTED EMISSION MEASUREMENT................................................. 13 4.1.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT.............................. 13 4.1.2 TEST INSTRUMENTS .................................................................................. 14 4.1.3 TEST PROCEDURE ..................................................................................... 15 4.1.4 DEVIATION FROM TEST STANDARD ......................................................... 15 4.1.5 TEST SETUP ................................................................................................ 15 4.1.6 EUT OPERATING CONDITIONS.................................................................. 16 4.1.7 TEST RESULTS (1) ...................................................................................... 17 4.1.8 TEST RESULTS (2) ...................................................................................... 19 4.1.9 TEST RESULTS (3) ...................................................................................... 21 4.1.10 TEST RESULTS (4) ...................................................................................... 23 4.1.11 TEST RESULTS (5) ...................................................................................... 25 4.1.12 TEST RESULTS (6) ...................................................................................... 27 4.2 RADIATED EMISSION MEASUREMENT...................................................... 29 4.2.1 LIMITS OF RADIATED EMISSION MEASUREMENT................................... 29 4.2.2 TEST INSTRUMENTS .................................................................................. 31 4.2.3 TEST PROCEDURE ..................................................................................... 33 4.2.4 DEVIATION FROM TEST STANDARD ......................................................... 34 4.2.5 TEST SETUP ................................................................................................ 34 4.2.6 EUT OPERATING CONDITIONS.................................................................. 34 4.2.7 TEST RESULTS (1) ...................................................................................... 35 4.2.8 TEST RESULTS (2) ...................................................................................... 39 4.2.9 TEST RESULTS (3) ...................................................................................... 43 4.2.10 TEST RESULTS (4) ...................................................................................... 47
5 PHOTOGRAPHS OF THE TEST CONFIGURATION..................................... 51
6 INFORMATION ON THE TESTING LABORATORIES ................................... 54
7 APPENDIX A – MODIFICATIONS RECORDERS FOR ENGINEERING CHANGES TO THE EUT BY THE LAB.......................................................... 55
Report No.: FD990517D14 3 Report Format Version 3.0.2
1 CERTIFICATION
PRODUCT: Notebook PC BRAND NAME: CLEVO, C.C.L., Qu@liquic
MODEL NO.: T510X, T511X (The "X" of model name could be define 0-9 or blank for marketing differentiation.)
TEST ITEM: ENGINEERING SAMPLE APPLICANT: CLEVO CO.
TESTED: May 18 ~ 26, 2010 STANDARDS: FCC Part 15, Subpart B, Class B
CISPR 22: 1997, Class B ICES-003: 2004, Class B ANSI C63.4-2003
The above equipment (Model No.: T5100, T5110) has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report.
PREPARED BY :
, DATE: June 7, 2010 ( Vivian Chen / Specialist )
TECHNICAL ACCEPTANCE :
, DATE: June 7, 2010 (Joyce Chen / Senior Engineer )
APPROVED BY :
, DATE: June 7, 2010 ( Kenny Meng / Assistant Manager )
Report No.: FD990517D14 4 Report Format Version 3.0.2
2 SUMMARY OF TEST RESULTS The EUT has been tested according to the following specifications:
Standard Test Type Result Remarks
Conducted Test PASS Meets Class B Limit Minimum passing margin is –9.77 dB at 4.395 MHz
FCC Part 15, Subpart B, Class B CISPR 22: 1997, Class B ICES-003: 2004, Class B
Radiated Test (30MHz ~ 25GHz) PASS
Meets Class B Limit Minimum passing margin is –3.10 dB at 720.01 MHz
Note: The limit for radiated test (for 30 ~ 1000MHz) was performed according to CISPR 22: 1997, which was specified in FCC PART 15 Subpart B 15.109(g). Also the limits of ICES-003: 2004 and CISPR 22: 1997 are same.
2.1 MEASUREMENT UNCERTAINTY Where relevant, the following measurement uncertainty levels have been estimated for tests performed on the EUT as specified in CISPR 16-4-2: This uncertainty represents an expanded uncertainty expressed at approximately the 95% confidence level using a coverage factor of k=2.
MEASUREMENT FREQUENCY UNCERTAINTY Conducted emissions 150kHz ~ 30MHz 3.43 dB
30MHz ~ 1GHz 3.68 dB Radiated emissions
Above 1GHz 2.76 dB
Report No.: FD990517D14 5 Report Format Version 3.0.2
3 GENERAL INFORMATION
3.1 GENERAL DESCRIPTION OF EUT
PRODUCT Notebook PC MODEL NO. T510X, T511X
POWER SUPPLY
Switching power adapter Rating: refer to Note below Power cord: Non-shielded DC (1.8m) with one ferrite core.
DATA CABLE SUPPLIED N/A
NOTE:
1. The EUT is a Notebook PC and the following interfaces:
² VGA ² HDMI ² USB 2.0 x 3 ² E-SATA ² Earphone Jack ² Microphone ² Digital Audio out ² RJ-45 ² RJ-11 ² Card reader slot
2. The EUT has several models with the following differences as below:
Brand Name Model No. Differentiation
T510X MB with V Pro CLEVO, C.C.L, Qu@liquic T511X MB without V Pro
The "X" in the model could be defined as 0~9 or blank for marketing differentiation. During the test, model no.: T5100, T5110 were selected as the representative models for the test and only their test data were recorded in this report.
Report No.: FD990517D14 6 Report Format Version 3.0.2
3. The EUT was configured with the following key components:
Brand Name Model No. Specification LCD Panel CHIMEI N156B3-L02 15.6” LCD Panel LED Panel AU B156RW01 INNOLUX BT156GW02
15.6” LED Panel
Inverter MITAC M660SR -- CPU
CORE I7-620M 2.66GHz CORE I5-540M 2.53GHz CORE I3-350M 2.27GHz
INTEL
CORE I5-520M 2.4GHz SATA HDD HITACHI HTS545016B9A300 160GB FUJITSU MJA2500BH 500GB FUJITSU MJA2320BH 320GB SEAGATE ST9500325AS 500GB SATA ODD TSST TS-L633C
HLDS GT32N
HLDS CT21N
SATA DVD SUPER MULTI
SO-DIMM (DDR-III) ELIXIR M2N2G64CB8HA5N-CG
ASINT SSZ3128M8-EDJE
GOLDKEY GKH200SO12808-1333A
HYNIX HMT125S6TFR8C-H9N0
DDR3-1333 2GB
Wireless LAN Realtek RTL8191SE IEEE 802.11 b/g/n
INTEL 633AN_HMWG IEEE 802.11 a/g/n PC Camera BISON BN28U5VA8-000
SIMPLO C01PL005F 2M
Bluetooth BILLIONTON GUBTCR42M
Castlenet BTC04R Bluetooth V2.1
3.75GHz Module HUAWEI EM775 USB 3.75G
Report No.: FD990517D14 7 Report Format Version 3.0.2
Brand Name Model No. Specification Battery SIMPLO SQU-601 10.8V/7200mAh/77.76Wh
SIMPLO M660NBAT-6 10.8V/4400mAh/47.52Wh
Touch PAD
SYNAPTICS TM-011398-003
Modem
MOTOROLA ML3054
AGERE D40 AM5
4. The EUT consumes power from a switching power adapter, which has several
models could be chosen, as the following:
5. For a more detailed features description, please refer to the manufacturer’s specifications or the User’s Manual.
Adapter No. Brand/ Model No. Specification
A HIPRO, HP-OK065B13
AC I/P: 100-240V, 50-60Hz, 1.7A DC O/P: 18.5V, 3.5A, 65W
B FSP, FSP065-RAB
AC I/P: 100-240V, 50-60Hz, 1.5A DC O/P: 19V, 3.42A, 65W
C Liteon, PA-1650-68
AC I/P: 100-240V, 50-60Hz, 2.0A DC O/P: 19V, 3.42A, 65W
Report No.: FD990517D14 8 Report Format Version 3.0.2
3.2 DESCRIPTION OF TEST MODES
1. The test configurations/modes were as follows:
Test Model T5100 T5110
Test Mode Mode 1 Mode 2 Mode 3 Mode 4 Components Brand/ Model/ Spec.
LCD Panel LED 15.6" HD
INNOLUX BT156GW02
LCD 15.6” HD CHIMEI
N156B3-L02
LED 15.6" HD AU
B156RW01
LED 15.6" HD INNOLUX
BT156GW02
Inverter N/A MITAC M660SR N/A N/A
CPU INTEL
CORE I7-620M 2.66GHz
INTEL CORE I5-540M
2.53GHz
INTEL CORE I3-350M
2.27GHz
INTEL CORE I5-520M
2.4GHz
SATA HDD SEAGATE
500GB ST9500325AS
FUJITSU 320GB
MJA2320BH
HITACHI 160GB
HTS545016B9A300
FUJITSU 500GB
MJA2500BH
SO-DIMM (DDR-III)
ELIXIR M2N2G64CB8HA5N
-CG 2GB/128M*8
ASINT SSZ3128M8-EDJE
2GB/128M*8
GOLDKEY GKH200SO12808-
1333A 2GB /128M*8
HYNIX HMT125S6TFR8C-
H9N0 2GB/128M*8
SATA ODD HLDS GT32N
TSST TS-L633C
HLDS CT21N
HLDS GT32N
Wireless LAN (Half Mini-Card)
INTEL/ 633AN_HMWG /
IEEE 802.11 a/g/n
Realtek/ RTL8191SE /IEEE
802.11 b/g/n
3.75G Module HUAWEI/ EM775/ USB 3.75G N/A N/A HUAWEI/ EM775/
USB 3.75G
Bluetooth CastleNet/ BTC04R/
Bluetooth V2.1
BILLIONTON/ GUBTCR42M/ Bluetooth V2.1
CastleNet/ BTC04R/
Bluetooth V2.1
Azalia Modem MOTOROLA/ ML3054
AGERE/ D40 AM5
MOTOROLA/ ML3054
AGERE/ D40 AM5
PC Camera BISON/ BN28U5VA8-000/ 2.0M
SIMPLO/ C01PL005F/
2M
BISON/ BN28U5VA8-000/
2.0M
Touch PAD SYNAPTICS/ TM-011398-003
Battery SIMPLO / M660NBAT-6/
10.8V/ 4400mAh/ 47.52Wh
SIMPLO / SQU-601/
10.8V/ 7200mAh/ 77.76Wh
SIMPLO / M660NBAT-6/
10.8V/ 4400mAh/ 47.52Wh
Adapter Adapter A
HIPRO HP-OK065B13
Adapter C Liteon
PA-1650-68
Adapter B FSP
FSP065-RAB
Adapter A HIPRO
HP-OK065B13
Report No.: FD990517D14 9 Report Format Version 3.0.2
2. The EUT was pre-tested HDMI and D-Sub interfaces and the worst emission
level was found under the HDMI interface.
3. The EUT is designed with AC power supply of rating 100-240Vac, 50-60Hz. For radiated emission evaluation, 230Vac/50Hz (for EN 55022), 240Vac/50Hz (for AS/NZS CISPR 22), 120Vac/60Hz (for FCC Part 15) & 100Vac/50Hz (for VCCI) had been covered during the pre-test. The worst radiated emission data was founded under the following:
Adapter Input Power Adapter A 120Vac/ 60Hz Adapter B 100Vac/ 50Hz Adapter C 230Vac/ 50Hz
4. For radiated emission test, Mode 1 ~ 4 were tested and the worst radiated emission level was found on Mode 1. According to the test result and client’s requirement, below are combination of configurations with their adapters as the following modes:
Test Item Test Mode Interface Final test w./ adapter AC I/P A with adapter A
B with adapter B Mode 1
C with adapter C
Mode 2 with adapter C
Mode 3 with adapter C
Conducted Test
Mode 4
HDMI
with adapter C
120V/ 60Hz
Mode 1 with adapter A 120V/ 60Hz
Mode 2 with adapter C 230V/ 50Hz
Mode 3 with adapter B 100V/ 50Hz Radiated Test
Mode 4
HDMI
with adapter A 120V/ 60Hz
All above test modes were recorded in this report.
Report No.: FD990517D14 10 Report Format Version 3.0.2
3.3 DESCRIPTION OF SUPPORT UNITS
The EUT has been tested as an independent unit together with other necessary accessories or support units. The following support units or accessories were used to form a representative test configuration during the tests.
NO. PRODUCT BRAND MODEL NO. SERIAL NO. FCC ID
1 WIDESCREEN FLAT PANEL MONITOR
DELL 2408WFP CN0NN79274261823S1DMS
FCC DoC Approved
2 SPEAKER BOSTON BA790 R0001475 FCC DoC Approved
3 External e-SATA Hard Disk
SEAGATE FreeAgent XTreme
2GEROG04 FCC DoC Approved
4 USB Flash Drive SanDisk Cruzer Micro Skin
NA FCC DoC Approved
5 PRINTER LEXMARK Z33 03331652570 FCC DoC Approved 6 EARPHONE PHILIPS SBC HL150 H2010156 N/A 7 MICROPHONE Labtec mic-333 N/A N/A 8 MOUSE MICROSOFT X800898 9241784-30608 FCC DoC Approved
9 NOTEBOOK COMPUTER
DELL PP04X 1W9ZZ1S FCC DoC Approved
10
PROGRAM-CONTROL TELEPHONE EXCHANGE
DLT TC-104H N/A N/A
11 Wireless Broadband Router
BUFFALO WHR-G300N-AP 74059085113377
FDI-09101528-0
12 BLUETOOTH EARPHONE
AboCom BHC210 050600441 SI4-MBHC21
13 Universal Radio Communication Tester
R&S CMU200 117260 N/A
14 HORN Antenna ETS 3117 00034127 N/A
Report No.: FD990517D14 11 Report Format Version 3.0.2
NO. SIGNAL CABLE DESCRIPTION OF THE ABOVE SUPPORT UNITS
1 1.8 m braid shielded wire, terminated with D-Sub connector via metallic frame, with two cores; 1.8m HDMI cable.
2 2.4 m wrapped shielded wire, terminated 1/8" Stereo Analog Jack or Digital S/PDIF RCA Jack, w/o core.
3 1.8 m braid shielded wire, terminated with e-SATA connector via drain wire, w/o core 4 1.5 m foil shielded wire, terminated with USB connector. 5 2.0 m foil shielded wire , terminated with USB connector via metallic frame, w/o core. 6 1.2 m wrapped shielded wire, terminated with 3.5mm phone plug via drain wire, w/o core. 7 2.4 m wrapped shielded wire, terminated via drain wire, with 3.5 mm phone plug, w/o core. 8 1.8 m foil shielded wire, terminated with USB connector via drain wire, with 1 core. 9 N/A 10 N/A 11 N/A 12 N/A 13 N/A 14 N/A
NOTE: (1) All power cords of the above support units are non-shielded (1.8m).
(2) The EUT together with support units 1-8 and communicated with support unit 9-10 (kept in a remote area), which acted as a Server PC and partners of communication
system via an UTP LAN cable and a telephone cable (10m each).
(3) The EUT together with support units 1-8 and communicated with support units 11-14 (kept in a remote area) via wireless transmission.
Report No.: FD990517D14 12 Report Format Version 3.0.2
TEST CONFIGURATION
10m UTP LAN Cable
(kept in a remote area)
Wireless Broadband
Router
USB Mouse
Bluetooth Earphon
e
Wireless transmission
D-Sub cable w./ two core
Microphone Earphone
NOTEBOOK COMPUTER
E-SATA HDD
HDMI cable
Monitor
10m Tel. Cable
USB Printer
USB Flash Drive EUT
SPEAKER
PROGRAM- CONTROL
TELEPHONE EXCHANGE
Horn Antenna
Universal Radio Communication
Tester
Wireless transmission
Report No.: FD990517D14 13 Report Format Version 3.0.2
4 EMISSION TEST
4.1 CONDUCTED EMISSION MEASUREMENT
4.1.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT
TEST STANDARD: FCC Part 15, Subpart B (Section: 15.107) CISPR 22: 1997 (section 5) ICES-003: 2004 (Class A: section 5.2)
(Class B: section 5.3)
Class A (dBuV) Class B (dBuV) FREQUENCY (MHz) Quasi-peak Average Quasi-peak Average
0.15 - 0.5 79 66 66 - 56 56 - 46 0.50 - 5.0 73 60 56 46 5.0 - 30.0 73 60 60 50
NOTE: (1) The lower limit shall apply at the transition frequencies.
(2) The limit decreases in line with the logarithm of the frequency in the range of 0.15 to 0.50 MHz.
(3) All emanations from a class A/B digital device or system, including any network of conductors and apparatus connected thereto, shall not exceed the level of field strengths specified above.
Report No.: FD990517D14 14 Report Format Version 3.0.2
4.1.2 TEST INSTRUMENTS
DESCRIPTION & MANUFACTURER MODEL NO. SERIAL NO. CALIBRATED
DATE CALIBRATED
UNTIL ROHDE & SCHWARZ Test Receiver
ESCS30 100290 Dec. 08, 2009 Dec. 07, 2010
ROHDE & SCHWARZ Artificial Mains Network (for EUT)
ESH3-Z5 839135/006 Sep. 09, 2009 Sep. 08, 2010
LISN With Adapter (for EUT) AD10 C00Ada-001 Sep. 09, 2009 Sep. 08, 2010
EMCO-L.I.S.N. (for peripheral) 3825/2 9204-1964 May 10, 2010 May 09, 2011
Software ADT_Cond_V7.3.7 NA NA NA
Software ADT_ISN_V7.3.7 NA NA NA
RF cable (JYEBAO) 5D-FB Cable-C02.01 Jan. 08, 2010 Jan. 07, 2011 LYNICS Terminator (For EMCO LISN) 0900510 E1-01-298 Jan. 21, 2010 Jan. 20, 2011
LYNICS Terminator (For EMCO LISN) 0900510 E1-01-299 Jan. 21, 2010 Jan. 20, 2011
NOTE: 1. The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. The test was performed in Shielded Room No. 2. 3. The VCCI Site Registration No. C-240.
Report No.: FD990517D14 15 Report Format Version 3.0.2
4.1.3 TEST PROCEDURE The basic test procedure was in accordance with ANSI C63.4-2003 (section 7), CISPR 22 (section 9) and ICES-003: 2004 (section 4). a. The EUT was placed 0.4 meters from the conducting wall of the shielded room
with EUT being connected to the power mains through a line impedance stabilization network (LISN). Other support units were connected to the power mains through another LISN. The two LISNs provide 50 Ohm/ 50uH of coupling impedance for the measuring instrument.
b. Both lines of the power mains connected to the EUT were checked for maximum conducted interference.
c. The frequency range from 150 kHz to 30 MHz was searched. Emission levels under (Limit - 20dB) were not recorded.
4.1.4 DEVIATION FROM TEST STANDARD No deviation 4.1.5 TEST SETUP
N o te : 1 .S u p p o rt u n its w e re c o n n e c te d to s e c o n d L IS N . 2 .B o th o f L IS N s (A M N ) a re 8 0 c m fro m E U T a n d a t le a s t 8 0 c m
f ro m o th e r u n its a n d o th e r m e ta l p la n e s s u p p o rt u n its .
4 0 c m
8 0 c m
T e s t R e c e iv e r
H o r iz o n ta l G ro u n d R e fe re n c e P la n e
E U T
L IS N
V e r t ic a l G ro u n d R e fe re n c e P la n e
For the actual test configuration, please refer to the related item – Photographs of the Test Configuration.
Report No.: FD990517D14 16 Report Format Version 3.0.2
4.1.6 EUT OPERATING CONDITIONS
a. Turned on the power of all equipment. b. Notebook (EUT) ran a test program to enable all functions. c. EUT read and wrote messages to/ from HDD, card reader, ext. HDD and
Flash Drive. d. EUT sent and received messages to/ from Server PC (kept in a remote
area) via an UTP LAN cable and a telephone cable (10m each). e. EUT sent and received messages to/ from Wireless Broadband Router
(kept in a remote area) via wireless transmission. f. EUT communicated messages with the Universal Radio Communication
Tester, which acted as a communication partners. g. Run 2G/3G link. h. EUT sent "H" messages to panel and ext. LCD monitor then they
displayed "H" patterns on their screens simultaneously. i. EUT sent “1kHz audio” signal to earphone / speaker. j. EUT sent “1kHz audio” signal to bluetooth earphone via wireless
transmission. k. EUT sent messages to printer, and the printer printed out. l. Video camera of EUT captured video image, then EUT displayed it on its
screen. m. Steps c-m were repeated.
Report No.: FD990517D14 17 Report Format Version 3.0.2
4.1.7 TEST RESULTS (1)
TEST MODE Mode 1A 6dB BANDWIDTH 9 kHz
INPUT POWER 120Vac, 60 Hz PHASE Line (L)
ENVIRONMENTAL CONDITIONS
20deg. C, 71% RH, 1009hPa
TESTED BY: Rober Tsai
Freq. Corr. Reading Value Emission Level Limit Margin
No Factor [dB (uV)] [dB (uV)] [dB (uV)] (dB) [MHz] (dB) Q.P. AV. Q.P. AV. Q.P. AV. Q.P. AV. 1 0.154 0.09 37.87 - 37.96 - 65.79 55.79 -27.83 - 2 0.213 0.11 38.71 - 38.82 - 63.11 53.11 -24.29 - 3 0.259 0.13 35.19 - 35.32 - 61.45 51.45 -26.13 - 4 2.887 0.60 22.96 - 23.56 - 56.00 46.00 -32.44 - 5 6.215 1.03 27.94 - 28.97 - 60.00 50.00 -31.03 - 6 16.559 1.61 32.38 - 33.99 - 60.00 50.00 -26.01 -
REMARKS: 1. Q.P. and AV. are abbreviations of quasi-peak and average individually. 2. "-": The Quasi-peak reading value also meets average limit and measurement with the average detector is unnecessary. 3. The emission levels of other frequencies were very low against the limit. 4. Margin value = Emission level - Limit value 5. Correction factor = Insertion loss + Cable loss 6. Emission Level = Correction Factor + Reading Value.
Report No.: FD990517D14 18 Report Format Version 3.0.2
TEST MODE Mode 1A 6dB BANDWIDTH 9 kHz
INPUT POWER 120Vac, 60 Hz PHASE Neutral (N)
ENVIRONMENTAL CONDITIONS
20deg. C, 71% RH, 1009hPa
TESTED BY: Rober Tsai
Freq. Corr. Reading Value Emission Level Limit Margin
No Factor [dB (uV)] [dB (uV)] [dB (uV)] (dB) [MHz] (dB) Q.P. AV. Q.P. AV. Q.P. AV. Q.P. AV. 1 0.166 0.10 35.11 - 35.21 - 65.18 55.18 -29.97 - 2 0.205 0.10 40.87 - 40.97 - 63.42 53.42 -22.45 - 3 0.275 0.14 37.68 - 37.82 - 60.97 50.97 -23.14 - 4 0.591 0.22 27.31 - 27.53 - 56.00 46.00 -28.47 - 5 4.863 0.73 27.65 - 28.38 - 56.00 46.00 -27.62 - 6 15.691 1.81 30.29 - 32.10 - 60.00 50.00 -27.90 -
REMARKS: 1. Q.P. and AV. are abbreviations of quasi-peak and average individually. 2. "-": The Quasi-peak reading value also meets average limit and measurement with the average detector is unnecessary. 3. The emission levels of other frequencies were very low against the limit. 4. Margin value = Emission level - Limit value 5. Correction factor = Insertion loss + Cable loss 6. Emission Level = Correction Factor + Reading Value.
Report No.: FD990517D14 19 Report Format Version 3.0.2
4.1.8 TEST RESULTS (2)
TEST MODE Mode 1B 6dB BANDWIDTH 9 kHz
INPUT POWER 120Vac, 60 Hz PHASE Line (L)
ENVIRONMENTAL CONDITIONS
20deg. C, 71% RH, 1009hPa
TESTED BY: Rober Tsai
Freq. Corr. Reading Value Emission Level Limit Margin
No Factor [dB (uV)] [dB (uV)] [dB (uV)] (dB) [MHz] (dB) Q.P. AV. Q.P. AV. Q.P. AV. Q.P. AV. 1 0.189 0.10 49.57 - 49.67 - 64.08 54.08 -14.41 - 2 0.306 0.16 39.50 - 39.66 - 60.07 50.07 -20.41 - 3 1.523 0.38 39.63 - 40.01 - 56.00 46.00 -15.99 - 4 2.297 0.54 38.13 - 38.67 - 56.00 46.00 -17.33 - 5 17.586 1.63 39.42 - 41.05 - 60.00 50.00 -18.95 - 6 21.539 1.73 41.67 - 43.40 - 60.00 50.00 -16.60 -
REMARKS: 1. Q.P. and AV. are abbreviations of quasi-peak and average individually. 2. "-": The Quasi-peak reading value also meets average limit and measurement with the average detector is unnecessary. 3. The emission levels of other frequencies were very low against the limit. 4. Margin value = Emission level - Limit value 5. Correction factor = Insertion loss + Cable loss 6. Emission Level = Correction Factor + Reading Value.
Report No.: FD990517D14 20 Report Format Version 3.0.2
TEST MODE Mode 1B 6dB BANDWIDTH 9 kHz
INPUT POWER 120Vac, 60 Hz PHASE Neutral (N)
ENVIRONMENTAL CONDITIONS
20deg. C, 71% RH, 1009hPa
TESTED BY: Rober Tsai
Freq. Corr. Reading Value Emission Level Limit Margin
No Factor [dB (uV)] [dB (uV)] [dB (uV)] (dB) [MHz] (dB) Q.P. AV. Q.P. AV. Q.P. AV. Q.P. AV. 1 0.201 0.10 46.74 - 46.84 - 63.58 53.58 -16.74 - 2 0.380 0.20 38.54 - 38.74 - 58.27 48.27 -19.53 - 3 0.595 0.22 40.13 - 40.35 - 56.00 46.00 -15.65 - 4 1.238 0.30 38.90 - 39.20 - 56.00 46.00 -16.80 - 5 2.156 0.50 38.17 - 38.67 - 56.00 46.00 -17.33 - 6 21.938 2.19 41.70 - 43.89 - 60.00 50.00 -16.11 -
REMARKS: 1. Q.P. and AV. are abbreviations of quasi-peak and average individually. 2. "-": The Quasi-peak reading value also meets average limit and measurement with the average detector is unnecessary. 3. The emission levels of other frequencies were very low against the limit. 4. Margin value = Emission level - Limit value 5. Correction factor = Insertion loss + Cable loss 6. Emission Level = Correction Factor + Reading Value.
Report No.: FD990517D14 21 Report Format Version 3.0.2
4.1.9 TEST RESULTS (3)
TEST MODE Mode 1C 6dB BANDWIDTH 9 kHz
INPUT POWER 120Vac, 60 Hz PHASE Line (L)
ENVIRONMENTAL CONDITIONS
20deg. C, 71% RH, 1009hPa
TESTED BY: Rober Tsai
Freq. Corr. Reading Value Emission Level Limit Margin
No Factor [dB (uV)] [dB (uV)] [dB (uV)] (dB) [MHz] (dB) Q.P. AV. Q.P. AV. Q.P. AV. Q.P. AV. 1 0.158 0.09 43.68 - 43.77 - 65.58 55.58 -21.81 - 2 0.189 0.10 52.59 - 52.69 - 64.08 54.08 -11.39 - 3 0.279 0.14 41.89 - 42.03 - 60.85 50.85 -18.81 - 4 0.318 0.16 41.99 - 42.15 - 59.76 49.76 -17.60 - 5 4.262 0.75 41.62 - 42.37 - 56.00 46.00 -13.63 - 6 13.438 1.57 43.11 - 44.68 - 60.00 50.00 -15.32 -
REMARKS: 1. Q.P. and AV. are abbreviations of quasi-peak and average individually. 2. "-": The Quasi-peak reading value also meets average limit and measurement with the average detector is unnecessary. 3. The emission levels of other frequencies were very low against the limit. 4. Margin value = Emission level - Limit value 5. Correction factor = Insertion loss + Cable loss 6. Emission Level = Correction Factor + Reading Value.
Report No.: FD990517D14 22 Report Format Version 3.0.2
TEST MODE Mode 1C 6dB BANDWIDTH 9 kHz
INPUT POWER 120Vac, 60 Hz PHASE Neutral (N)
ENVIRONMENTAL CONDITIONS
20deg. C, 71% RH, 1009hPa
TESTED BY: Rober Tsai
Freq. Corr. Reading Value Emission Level Limit Margin
No Factor [dB (uV)] [dB (uV)] [dB (uV)] (dB) [MHz] (dB) Q.P. AV. Q.P. AV. Q.P. AV. Q.P. AV. 1 0.193 0.10 52.59 - 52.69 - 63.91 53.91 -11.22 - 2 0.267 0.14 46.70 - 46.84 - 61.20 51.20 -14.37 - 3 0.310 0.16 42.86 - 43.02 - 59.97 49.97 -16.95 - 4 0.408 0.21 39.86 - 40.07 - 57.69 47.69 -17.62 - 5 4.395 0.68 45.55 33.87 46.23 34.55 56.00 46.00 -9.77 -11.45 6 13.480 1.61 42.70 - 44.31 - 60.00 50.00 -15.69 -
REMARKS: 1. Q.P. and AV. are abbreviations of quasi-peak and average individually. 2. "-": The Quasi-peak reading value also meets average limit and measurement with the average detector is unnecessary. 3. The emission levels of other frequencies were very low against the limit. 4. Margin value = Emission level - Limit value 5. Correction factor = Insertion loss + Cable loss 6. Emission Level = Correction Factor + Reading Value.
Report No.: FD990517D14 23 Report Format Version 3.0.2
4.1.10 TEST RESULTS (4)
TEST MODE Mode 2 6dB BANDWIDTH 9 kHz
INPUT POWER 120Vac, 60 Hz PHASE Line (L)
ENVIRONMENTAL CONDITIONS
20deg. C, 71% RH, 1009hPa
TESTED BY: Rober Tsai
Freq. Corr. Reading Value Emission Level Limit Margin
No Factor [dB (uV)] [dB (uV)] [dB (uV)] (dB) [MHz] (dB) Q.P. AV. Q.P. AV. Q.P. AV. Q.P. AV. 1 0.193 0.10 48.67 - 48.77 - 63.91 53.91 -15.14 - 2 0.252 0.13 45.63 - 45.76 - 61.71 51.71 -15.95 - 3 0.392 0.21 38.90 - 39.11 - 58.02 48.02 -18.91 - 4 3.273 0.64 38.84 - 39.48 - 56.00 46.00 -16.52 - 5 4.402 0.77 39.08 - 39.85 - 56.00 46.00 -16.15 - 6 13.309 1.57 42.61 - 44.18 - 60.00 50.00 -15.82 -
REMARKS: 1. Q.P. and AV. are abbreviations of quasi-peak and average individually. 2. "-": The Quasi-peak reading value also meets average limit and measurement with the average detector is unnecessary. 3. The emission levels of other frequencies were very low against the limit. 4. Margin value = Emission level - Limit value 5. Correction factor = Insertion loss + Cable loss 6. Emission Level = Correction Factor + Reading Value.
Report No.: FD990517D14 24 Report Format Version 3.0.2
TEST MODE Mode 2 6dB BANDWIDTH 9 kHz
INPUT POWER 120Vac, 60 Hz PHASE Neutral (N)
ENVIRONMENTAL CONDITIONS
20deg. C, 71% RH, 1009hPa
TESTED BY: Rober Tsai
Freq. Corr. Reading Value Emission Level Limit Margin
No Factor [dB (uV)] [dB (uV)] [dB (uV)] (dB) [MHz] (dB) Q.P. AV. Q.P. AV. Q.P. AV. Q.P. AV. 1 0.197 0.10 50.13 - 50.23 - 63.74 53.74 -13.51 - 2 0.263 0.13 44.60 - 44.73 - 61.33 51.33 -16.59 - 3 0.498 0.21 37.52 - 37.73 - 56.04 46.04 -18.30 - 4 4.355 0.67 40.15 - 40.82 - 56.00 46.00 -15.18 - 5 13.082 1.58 42.83 - 44.41 - 60.00 50.00 -15.59 - 6 16.383 1.88 40.23 - 42.11 - 60.00 50.00 -17.89 -
REMARKS: 1. Q.P. and AV. are abbreviations of quasi-peak and average individually. 2. "-": The Quasi-peak reading value also meets average limit and measurement with the average detector is unnecessary. 3. The emission levels of other frequencies were very low against the limit. 4. Margin value = Emission level - Limit value 5. Correction factor = Insertion loss + Cable loss 6. Emission Level = Correction Factor + Reading Value.
Report No.: FD990517D14 25 Report Format Version 3.0.2
4.1.11 TEST RESULTS (5)
TEST MODE Mode 3 6dB BANDWIDTH 9 kHz
INPUT POWER 120Vac, 60 Hz PHASE Line (L)
ENVIRONMENTAL CONDITIONS
20deg. C, 71% RH, 1009hPa
TESTED BY: Rober Tsai
Freq. Corr. Reading Value Emission Level Limit Margin
No Factor [dB (uV)] [dB (uV)] [dB (uV)] (dB) [MHz] (dB) Q.P. AV. Q.P. AV. Q.P. AV. Q.P. AV. 1 0.189 0.10 48.87 - 48.97 - 64.08 54.08 -15.11 - 2 0.244 0.12 45.49 - 45.61 - 61.97 51.97 -16.35 - 3 0.330 0.17 40.33 - 40.50 - 59.46 49.46 -18.96 - 4 3.992 0.71 40.35 - 41.06 - 56.00 46.00 -14.94 - 5 4.355 0.76 38.65 - 39.41 - 56.00 46.00 -16.59 - 6 13.070 1.57 45.36 - 46.93 - 60.00 50.00 -13.07 -
REMARKS: 1. Q.P. and AV. are abbreviations of quasi-peak and average individually. 2. "-": The Quasi-peak reading value also meets average limit and measurement with the average detector is unnecessary. 3. The emission levels of other frequencies were very low against the limit. 4. Margin value = Emission level - Limit value 5. Correction factor = Insertion loss + Cable loss 6. Emission Level = Correction Factor + Reading Value.
Report No.: FD990517D14 26 Report Format Version 3.0.2
TEST MODE Mode 3 6dB BANDWIDTH 9 kHz
INPUT POWER 120Vac, 60 Hz PHASE Neutral (N)
ENVIRONMENTAL CONDITIONS
20deg. C, 71% RH, 1009hPa
TESTED BY: Rober Tsai
Freq. Corr. Reading Value Emission Level Limit Margin
No Factor [dB (uV)] [dB (uV)] [dB (uV)] (dB) [MHz] (dB) Q.P. AV. Q.P. AV. Q.P. AV. Q.P. AV. 1 0.189 0.10 50.71 - 50.81 - 64.08 54.08 -13.27 - 2 0.205 0.10 49.15 - 49.25 - 63.42 53.42 -14.17 - 3 0.263 0.13 44.62 - 44.75 - 61.33 51.33 -16.57 - 4 4.250 0.66 40.33 - 40.99 - 56.00 46.00 -15.01 - 5 13.074 1.58 44.17 - 45.75 - 60.00 50.00 -14.25 - 6 16.168 1.86 40.47 - 42.33 - 60.00 50.00 -17.67 -
REMARKS: 1. Q.P. and AV. are abbreviations of quasi-peak and average individually. 2. "-": The Quasi-peak reading value also meets average limit and measurement with the average detector is unnecessary. 3. The emission levels of other frequencies were very low against the limit. 4. Margin value = Emission level - Limit value 5. Correction factor = Insertion loss + Cable loss 6. Emission Level = Correction Factor + Reading Value.
Report No.: FD990517D14 27 Report Format Version 3.0.2
4.1.12 TEST RESULTS (6)
TEST MODE Mode 4 6dB BANDWIDTH 9 kHz
INPUT POWER 120Vac, 60 Hz PHASE Line (L)
ENVIRONMENTAL CONDITIONS
20deg. C, 71% RH, 1009hPa
TESTED BY: Rober Tsai
Freq. Corr. Reading Value Emission Level Limit Margin
No Factor [dB (uV)] [dB (uV)] [dB (uV)] (dB) [MHz] (dB) Q.P. AV. Q.P. AV. Q.P. AV. Q.P. AV. 1 0.197 0.10 47.92 - 48.02 - 63.74 53.74 -15.72 - 2 0.240 0.12 42.07 - 42.19 - 62.10 52.10 -19.91 - 3 0.396 0.21 38.23 - 38.44 - 57.93 47.93 -19.50 - 4 4.309 0.75 39.58 - 40.33 - 56.00 46.00 -15.67 - 5 13.121 1.57 43.77 - 45.34 - 60.00 50.00 -14.66 - 6 16.320 1.60 39.09 - 40.69 - 60.00 50.00 -19.31 -
REMARKS: 1. Q.P. and AV. are abbreviations of quasi-peak and average individually. 2. "-": The Quasi-peak reading value also meets average limit and measurement with the average detector is unnecessary. 3. The emission levels of other frequencies were very low against the limit. 4. Margin value = Emission level - Limit value 5. Correction factor = Insertion loss + Cable loss 6. Emission Level = Correction Factor + Reading Value.
Report No.: FD990517D14 28 Report Format Version 3.0.2
TEST MODE Mode 4 6dB BANDWIDTH 9 kHz
INPUT POWER 120Vac, 60 Hz PHASE Neutral (N)
ENVIRONMENTAL CONDITIONS
20deg. C, 71% RH, 1009hPa
TESTED BY: Rober Tsai
Freq. Corr. Reading Value Emission Level Limit Margin
No Factor [dB (uV)] [dB (uV)] [dB (uV)] (dB) [MHz] (dB) Q.P. AV. Q.P. AV. Q.P. AV. Q.P. AV. 1 0.193 0.10 50.19 - 50.29 - 63.91 53.91 -13.62 - 2 0.205 0.10 48.85 - 48.95 - 63.42 53.42 -14.47 - 3 0.306 0.16 42.11 - 42.27 - 60.07 50.07 -17.80 - 4 4.316 0.67 40.02 - 40.69 - 56.00 46.00 -15.31 - 5 12.883 1.56 42.62 - 44.18 - 60.00 50.00 -15.82 - 6 18.305 2.08 37.08 - 39.16 - 60.00 50.00 -20.84 -
REMARKS: 1. Q.P. and AV. are abbreviations of quasi-peak and average individually. 2. "-": The Quasi-peak reading value also meets average limit and measurement with the average detector is unnecessary. 3. The emission levels of other frequencies were very low against the limit. 4. Margin value = Emission level - Limit value 5. Correction factor = Insertion loss + Cable loss 6. Emission Level = Correction Factor + Reading Value.
Report No.: FD990517D14 29 Report Format Version 3.0.2
4.2 RADIATED EMISSION MEASUREMENT
4.2.1 LIMITS OF RADIATED EMISSION MEASUREMENT
TEST STANDARD: FCC Part 15, Subpart B (Section: 15.109) CISPR 22: 1997 (section 6) ICES-003: 2004 (Class A: Section 5.4)
(Class B: Section 5.5)
FOR FREQUENCY BELOW 1000 MHz Class A (at 10m) Class B (at 10m)
FREQUENCY (MHz) dBuV/m dBuV/m
30 – 230 40 30 230 – 1000 47 37
Note: The limit for radiated test was performed according to CISPR 22: 1997, which was specified in FCC PART 15B 15.109(g). Also the limits of ICES-003: 2004 and CISPR 22: 1997 are same.
LIMIT OF RADIATED EMISSION OF FCC PART 15, SUBPART B FOR FREQUENCY ABOVE 1000 MHz
Class A (dBuV/m) (at 3m) Class B (dBuV/m) (at 3m) FREQUENCY (MHz)
PEAK AVERAGE PEAK AVERAGE Above 1000 80.0 60.0 74.0 54.0
Note: (1) The lower limit shall apply at the transition frequencies. (2) Emission level (dBuV/m) = 20 log Emission level (uV/m). (3) All emanation from a class A/B digital device or system, including any network of
conductors and apparatus connected thereto, shall not exceed the level of field strengths specified above.
Report No.: FD990517D14 30 Report Format Version 3.0.2
FREQUENCY RANGE OF RADIATED MEASUREMENT (For unintentional radiators) Highest frequency generated or
Upper frequency of measurement used in the device or on which the
device operates or tunes (MHz)
Range (MHz)
Below 1.705 30 1.705 – 108 1000 108 – 500 2000
500 – 1000 5000
Above 1000 5th harmonic of the highest frequency or 40 GHz, whichever is lower
Report No.: FD990517D14 31 Report Format Version 3.0.2
4.2.2 TEST INSTRUMENTS Frequency Range 30MHz-1GHz
DESCRIPTION & MANUFACTURER MODEL NO. SERIAL NO. CALIBRATED
DATE CALIBRATED
UNTIL Agilent Preamplifier 8447D 2944A11062 Sep. 03, 2009 Sep. 02, 2010 Agilent Preamplifier 8447D 2944A11064 Sep. 03, 2009 Sep. 02, 2010 Agilent Test Spectrum E4443A MY46182050 Jul. 02, 2009 Jul. 01, 2010
Agilent Test Spectrum E4443A MY46182049 Jul. 07, 2009 Jul. 06, 2010
Agilent Test Preselector N9039A MY46520284 Jul. 02, 2009 Jul. 01, 2010
Agilent Test Preselector N9039A MY46520283 Jul. 07, 2009 Jul. 06, 2010
Agilent Signal Generator N5181A MY47421329 Jul. 02, 2009 Jul. 01, 2010
Schwarzbeck Antenna VULB9168 9168-316 Apr. 30, 2010 Apr. 29, 2011
Schwarzbeck Antenna VULB9168 9168-317 Apr. 30, 2010 Apr. 29, 2011
Max Full. Turn Table & Tower MF7802 MF7802121 NA NA
Max Full. Tower MF7802 MF780208105 NA NA
Software ADT_Radiated_V8.7.03.5 NA NA NA
WOKEN RF cable 8D CABLE-CH8-01.V Dec. 23, 2009 Dec. 22, 2010
JYE BAO RF cable 8D CABLE-CH8-02.H Dec. 23, 2009 Dec. 22, 2010
JYE BAO RF cable 8D CABLE-CH8-03.3M Dec. 23, 2009 Dec. 22, 2010
NOTE: 1. The calibration interval of the above test instruments is 12 months. And the calibrations are traceable to NML/ROC and NIST/USA.
2. The test was performed in Chamber No. 8. 3. The Industry Canada Reference No. IC 7450E-8. 4. The VCCI Site Registration No. R-2946 5. The FCC Site Registration No. 493821.
Report No.: FD990517D14 32 Report Format Version 3.0.2
Frequency Range above 1GHz DESCRIPTION & MANUFACTURER MODEL NO. SERIAL NO. CALIBRATED
DATE CALIBRATED
UNTIL Agilent Spectrum 8564EC 4208A00659 Jul. 24, 2009 Jul. 23, 2010 Agilent Preamplifier 8449B 3008A01924 Aug. 31, 2009 Aug. 30, 2010 Agilent Preamplifier 8449B 3008A01292 Aug. 10, 2009 Aug. 09, 2010
MITEQ Preamplifier AMF-6F-260400-33-8P 892164 Aug. 31, 2009 Aug. 30, 2010
Schwarzbeck Horn Antenna BBHA-9170 BBHA9170190 Sep. 24, 2009 Sep. 23, 2010
Schwarzbeck Horn Antenna BBHA-9120 D130 May 25, 2010 May 24, 2011
Max Full. Turn Table MF7802 MF7802121 NA NA
Max Full. Tower MF7802 MF780208105 NA NA
Software ADT_Radiated_V8.7.03.5 NA NA NA
SUHNER RF cable SF106-18 PHACAB-1G-40GHz Aug. 20, 2009 Aug. 19, 2010
NOTE: 1. The calibration interval of the above test instruments is 12 months. And the calibrations are traceable to NML/ROC and NIST/USA.
2. The test was performed in Chamber No. 8. 3. The Industry Canada Reference No. IC 7450E-8. 4. The VCCI Site Registration No. G-19 5. The FCC Site Registration No. 493821.
Report No.: FD990517D14 33 Report Format Version 3.0.2
4.2.3 TEST PROCEDURE <Frequency Range 30MHz ~ 1GHz > a. The EUT was placed on the top of a rotating table 0.8 meters above the ground
at a 10 meter semi-anechoic chamber room. The table was rotated 360 degrees to determine the position of the highest radiation.
b. The EUT was set 10 meters away from the interference-receiving antenna, which was mounted on the top of a variable-height antenna tower.
c. The height of antenna is varied from one meter to four meters above the ground to determine the maximum value of the field strength. Both horizontal and vertical polarizations of the antenna are set to make the measurement.
d. For each suspected emission, the EUT was arranged to its worst case and then the antenna was tuned to heights from 1 meter to 4 meters and the turn table was turned from 0 degrees to 360 degrees to find the maximum reading.
e. The test-receiver system was set to quasi-peak detect function and specified bandwidth with maximum hold mode when the test frequency is below 1 GHz.
NOTE: The resolution bandwidth of test receiver/spectrum analyzer is 120kHz for Quasi-peak detection (QP) at frequency below 1GHz.
<Frequency Range above 1GHz> a. The EUT was placed on the top of a rotating table 0.8 meters above the
ground at a 10 meter semi-anechoic chamber room. The table was rotated 360 degrees to determine the position of the highest radiation.
b. The EUT was set 3 meters away from the interference-receiving antenna, which was mounted on the top of a variable-height antenna tower.
c. The height of antenna can be varied from one meter to four meters, the height of adjustment depends on the EUT height and the antenna 3dB beamwidth both, to detect the maximum value of the field strength. Both horizontal and vertical polarizations of the antenna are set to make the measurement.
d. For each suspected emission, the EUT was arranged to its worst case and then the antenna was tuned to heights and the rotatable table was turned from 0 degrees to 360 degrees to find the maximum reading.
e. The test-receiver system was set to peak and average detect function and specified bandwidth with maximum hold mode when the test frequency is above 1 GHz.
NOTE:
1. The resolution bandwidth is 1MHz and video bandwidth of test receiver/spectrum analyzer is 3MHz for Peak detection at frequency above 1GHz. The resolution bandwidth of test receiver/spectrum analyzer is 1 MHz for Average detection (AV) at frequency above 1GHz.
2. For measurement of frequency above 1000 MHz, the EUT was set 3 meters away from the receiver antenna.
Report No.: FD990517D14 34 Report Format Version 3.0.2
4.2.4 DEVIATION FROM TEST STANDARD No deviation
4.2.5 TEST SETUP <Frequency Range 30MHz ~ 1GHz >
10m
Ant. Tower 1-4m Variable
Turn Table
EUT& Support Units
Ground Plane
Test Receiver
80cm
<Frequency Range above 1GHz>
* : depends on the EUT height and the antenna 3dB beamwidth both, refer to section 7.3 of CISPR 16-2-3.
For the actual test configuration, please refer to the related item – Photographs of the Test Configuration.
4.2.6 EUT OPERATING CONDITIONS Same as item 4.1.6.
3m
1-4m* Variable
Turn Table
EUT& Support
Units
Ground Plane Spectrum analyzer
80cm
Absorber
Ant. Tower
Report No.: FD990517D14 35 Report Format Version 3.0.2
4.2.7 TEST RESULTS (1)
TEST MODE Mode 1
FREQUENCY RANGE 30-1000 MHz
DETECTOR FUNCTION & RESOLUTION BANDWIDTH
Quasi-Peak, 120 kHz
ENVIRONMENTAL CONDITIONS
17 deg. C, 70% RH, 1009hPa
TESTED BY: Bull Cheng
ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 10 M
No. Freq. (MHz)
Emission Level
(dBuV/m)
Limit (dBuV/m)
Margin (dB)
Antenna Height
(m)
Table Angle
(Degree)
Raw Value
(dBuV)
Correction Factor (dB/m)
1 154.82 23.43 QP 30.00 -6.57 4.00 H 289 8.58 14.85 2 239.96 32.79 QP 37.00 -4.21 3.45 H 108 19.30 13.49 3 442.35 32.65 QP 37.00 -4.35 2.12 H 118 13.13 19.52 4 480.01 33.41 QP 37.00 -3.59 1.97 H 32 12.80 20.61 5 540.02 33.14 QP 37.00 -3.86 1.95 H 151 11.07 22.07 6 574.74 33.55 QP 37.00 -3.45 1.44 H 59 10.59 22.96 7 599.85 33.82 QP 37.00 -3.18 1.50 H 102 10.19 23.63 8 622.23 33.08 QP 37.00 -3.92 1.93 H 101 9.15 23.93 9 672.32 33.23 QP 37.00 -3.77 1.62 H 95 8.56 24.67
10 720.01 33.90 QP 37.00 -3.10 1.50 H 103 8.46 25.44 11 771.80 32.85 QP 37.00 -4.15 1.00 H 64 6.71 26.14 12 774.64 32.18 QP 37.00 -4.82 1.00 H 65 6.01 26.17 13 810.01 33.55 QP 37.00 -3.45 1.00 H 109 6.94 26.61 14 899.22 33.69 QP 37.00 -3.31 2.00 H 25 5.66 28.03 15 959.97 33.26 QP 37.00 -3.74 1.00 H 268 4.73 28.53 16 972.05 32.72 QP 37.00 -4.28 1.00 H 260 4.07 28.65
REMARKS: 1. Emission level(dBuV/m)=Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor (dB/m) + Cable Factor (dB) 3. The other emission levels were very low against the limit.
4. Margin value = Emission level – Limit value.
Report No.: FD990517D14 36 Report Format Version 3.0.2
TEST MODE Mode 1
FREQUENCY RANGE 30-1000 MHz
DETECTOR FUNCTION & RESOLUTION BANDWIDTH
Quasi-Peak, 120 kHz
ENVIRONMENTAL CONDITIONS
17 deg. C, 70% RH, 1009hPa
TESTED BY: Bull Cheng
ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 10 M
No. Freq. (MHz)
Emission Level
(dBuV/m)
Limit (dBuV/m)
Margin (dB)
Antenna Height
(m)
Table Angle
(Degree)
Raw Value
(dBuV)
Correction Factor (dB/m)
1 33.20 25.19 QP 30.00 -4.81 1.46 V 247 12.60 12.59 2 116.21 24.77 QP 30.00 -5.23 1.50 V 264 13.22 11.55 3 154.82 25.79 QP 30.00 -4.21 1.00 V 324 11.23 14.56 4 162.04 25.04 QP 30.00 -4.96 1.54 V 272 10.67 14.37 5 239.96 32.36 QP 37.00 -4.64 2.00 V 222 19.28 13.08 6 324.00 30.82 QP 37.00 -6.18 1.95 V 268 14.48 16.34 7 480.01 33.80 QP 37.00 -3.20 2.92 V 114 13.44 20.36 8 574.74 32.60 QP 37.00 -4.40 3.44 V 332 10.04 22.56 9 624.60 33.56 QP 37.00 -3.44 3.56 V 310 10.03 23.53
10 671.85 33.46 QP 37.00 -3.54 2.45 V 292 9.19 24.27 11 697.07 32.96 QP 37.00 -4.04 2.50 V 4 8.26 24.70 12 720.05 33.44 QP 37.00 -3.56 2.44 V 129 8.39 25.05 13 771.56 32.24 QP 37.00 -4.76 3.93 V 240 6.49 25.75 14 774.76 32.18 QP 37.00 -4.82 1.80 V 265 6.39 25.79 15 810.05 33.06 QP 37.00 -3.94 2.11 V 137 6.81 26.25 16 960.00 33.85 QP 37.00 -3.15 1.91 V 76 5.88 27.97
REMARKS: 1. Emission level(dBuV/m)=Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor (dB/m) + Cable Factor (dB) 3. The other emission levels were very low against the limit.
4. Margin value = Emission level – Limit value.
Report No.: FD990517D14 37 Report Format Version 3.0.2
TEST MODE Mode 1
FREQUENCY RANGE 1-25GHz
DETECTOR FUNCTION & RESOLUTION BANDWIDTH
Peak/ Average , 1MHz
ENVIRONMENTAL CONDITIONS
17 deg. C, 70% RH, 1009hPa
TESTED BY: Bull Cheng
ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M
No. Freq. (MHz)
Emission Level
(dBuV/m)
Limit (dBuV/m)
Margin (dB)
Antenna Height
(m)
Table Angle
(Degree)
Raw Value
(dBuV)
Correction Factor (dB/m)
1 1512.01 50.82 PK 74.00 -23.18 1.00 H 205 22.08 28.74 2 1512.01 40.91 AV 54.00 -13.09 1.00 H 205 12.17 28.74 3 1619.99 47.93 PK 74.00 -26.07 1.00 H 249 18.64 29.29 4 1619.99 43.52 AV 54.00 -10.48 1.00 H 252 14.23 29.29 5 1728.08 52.48 PK 74.00 -21.52 1.70 H 160 22.67 29.81 6 1728.08 43.14 AV 54.00 -10.86 1.70 H 160 13.33 29.81 7 2160.01 47.52 PK 74.00 -26.48 1.00 H 165 15.82 31.70 8 2160.01 40.03 AV 54.00 -13.97 1.00 H 165 8.33 31.70 9 4483.47 48.13 PK 74.00 -25.87 1.00 H 102 9.50 38.63
10 4483.47 38.96 AV 54.00 -15.04 1.00 H 102 0.33 38.63 REMARKS: 1. Emission level(dBuV/m)=Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor (dB/m) + Cable Factor (dB) 3. The other emission levels were very low against the limit.
4. Margin value = Emission level – Limit value.
Report No.: FD990517D14 38 Report Format Version 3.0.2
TEST MODE Mode 1
FREQUENCY RANGE 1-25GHz
DETECTOR FUNCTION & RESOLUTION BANDWIDTH
Peak/ Average , 1MHz
ENVIRONMENTAL CONDITIONS
17 deg. C, 70% RH, 1009hPa
TESTED BY: Bull Cheng
ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M
No. Freq. (MHz)
Emission Level
(dBuV/m)
Limit (dBuV/m)
Margin (dB)
Antenna Height
(m)
Table Angle
(Degree)
Raw Value
(dBuV)
Correction Factor (dB/m)
1 1511.95 48.69 PK 74.00 -25.31 1.00 V 280 19.95 28.74 2 1511.95 39.06 AV 54.00 -14.94 1.00 V 280 10.32 28.74 3 1620.06 47.85 PK 74.00 -26.15 1.00 V 1 18.56 29.29 4 1620.06 42.71 AV 54.00 -11.29 1.00 V 1 13.42 29.29 5 1728.11 51.51 PK 74.00 -22.49 1.00 V 354 21.70 29.81 6 1728.11 40.77 AV 54.00 -13.23 1.00 V 354 10.96 29.81 7 1972.06 49.29 PK 74.00 -24.71 1.00 V 357 18.26 31.03 8 1972.06 32.88 AV 54.00 -21.12 1.00 V 357 1.85 31.03 9 2159.99 49.20 PK 74.00 -24.80 1.35 V 5 17.51 31.69
10 2159.99 42.70 AV 54.00 -11.30 1.35 V 5 11.01 31.69 11 4477.68 51.07 PK 74.00 -22.93 1.00 V 220 12.44 38.63 12 4477.68 38.94 AV 54.00 -15.06 1.00 V 220 0.31 38.63
REMARKS: 1. Emission level(dBuV/m)=Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor (dB/m) + Cable Factor (dB) 3. The other emission levels were very low against the limit.
4. Margin value = Emission level – Limit value.
Report No.: FD990517D14 39 Report Format Version 3.0.2
4.2.8 TEST RESULTS (2)
TEST MODE Mode 2
FREQUENCY RANGE 30-1000 MHz
DETECTOR FUNCTION & RESOLUTION BANDWIDTH
Quasi-Peak, 120 kHz
ENVIRONMENTAL CONDITIONS
17 deg. C, 70% RH, 1009hPa
TESTED BY: Bull Cheng
ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 10 M
No. Freq. (MHz)
Emission Level
(dBuV/m)
Limit (dBuV/m)
Margin (dB)
Antenna Height
(m)
Table Angle
(Degree)
Raw Value
(dBuV)
Correction Factor (dB/m)
1 150.37 26.49 QP 30.00 -3.51 3.98 H 351 11.61 14.88 2 239.98 33.60 QP 37.00 -3.40 2.86 H 233 20.11 13.49 3 359.93 32.46 QP 37.00 -4.54 1.79 H 252 15.13 17.33 4 442.35 33.60 QP 37.00 -3.40 2.11 H 104 14.08 19.52 5 480.01 33.10 QP 37.00 -3.90 2.05 H 272 12.49 20.61 6 540.64 33.49 QP 37.00 -3.51 2.03 H 308 11.40 22.09 7 622.35 32.96 QP 37.00 -4.04 1.58 H 138 9.03 23.93 8 674.46 33.58 QP 37.00 -3.42 1.57 H 104 8.88 24.70 9 720.05 31.54 QP 37.00 -5.46 1.44 H 54 6.10 25.44
10 799.39 32.21 QP 37.00 -4.79 1.23 H 102 5.76 26.45 11 824.50 32.28 QP 37.00 -4.72 1.53 H 108 5.45 26.83 12 846.64 32.07 QP 37.00 -4.93 1.54 H 114 4.90 27.17 13 959.97 33.69 QP 37.00 -3.31 1.37 H 55 5.16 28.53
REMARKS: 1. Emission level(dBuV/m)=Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor (dB/m) + Cable Factor (dB) 3. The other emission levels were very low against the limit.
4. Margin value = Emission level – Limit value.
Report No.: FD990517D14 40 Report Format Version 3.0.2
TEST MODE Mode 2
FREQUENCY RANGE 30-1000 MHz
DETECTOR FUNCTION & RESOLUTION BANDWIDTH
Quasi-Peak, 120 kHz
ENVIRONMENTAL CONDITIONS
17 deg. C, 70% RH, 1009hPa
TESTED BY: Bull Cheng
ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 10 M
No. Freq. (MHz)
Emission Level
(dBuV/m)
Limit (dBuV/m)
Margin (dB)
Antenna Height
(m)
Table Angle
(Degree)
Raw Value
(dBuV)
Correction Factor (dB/m)
1 33.22 26.59 QP 30.00 -3.41 1.44 V 268 14.00 12.59 2 111.95 24.75 QP 30.00 -5.25 1.56 V 110 13.63 11.12 3 150.39 26.77 QP 30.00 -3.23 1.02 V 286 12.10 14.67 4 239.99 33.74 QP 37.00 -3.26 1.07 V 123 20.66 13.08 5 480.01 32.21 QP 37.00 -4.79 3.88 V 134 11.85 20.36 6 622.35 31.37 QP 37.00 -5.63 2.22 V 331 7.87 23.50 7 674.46 32.21 QP 37.00 -4.79 2.24 V 339 7.90 24.31 8 696.84 31.28 QP 37.00 -5.72 2.63 V 352 6.58 24.70 9 720.05 31.24 QP 37.00 -5.76 1.89 V 99 6.19 25.05
10 796.55 31.81 QP 37.00 -5.19 2.39 V 68 5.74 26.07 11 959.97 33.71 QP 37.00 -3.29 4.00 V 80 5.74 27.97
REMARKS: 1. Emission level(dBuV/m)=Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor (dB/m) + Cable Factor (dB) 3. The other emission levels were very low against the limit.
4. Margin value = Emission level – Limit value.
Report No.: FD990517D14 41 Report Format Version 3.0.2
TEST MODE Mode 2
FREQUENCY RANGE 1-12.65GHz
DETECTOR FUNCTION & RESOLUTION BANDWIDTH
Peak/ Average , 1MHz
ENVIRONMENTAL CONDITIONS
17 deg. C, 70% RH, 1009hPa
TESTED BY: Bull Cheng
ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M
No. Freq. (MHz)
Emission Level
(dBuV/m)
Limit (dBuV/m)
Margin (dB)
Antenna Height
(m)
Table Angle
(Degree)
Raw Value
(dBuV)
Correction Factor (dB/m)
1 1496.94 42.69 PK 74.00 -31.31 1.35 H 101 14.03 28.66 2 1496.94 29.91 AV 54.00 -24.09 1.35 H 101 1.25 28.66 3 2160.07 50.50 PK 74.00 -23.50 1.00 H 168 18.80 31.70 4 2160.07 42.89 AV 54.00 -11.11 1.00 H 168 11.19 31.70 5 4481.29 47.30 PK 74.00 -26.70 1.00 H 213 8.67 38.63 6 4481.29 38.83 AV 54.00 -15.17 1.00 H 213 0.20 38.63
REMARKS: 1. Emission level(dBuV/m)=Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor (dB/m) + Cable Factor (dB) 3. The other emission levels were very low against the limit.
4. Margin value = Emission level – Limit value.
Report No.: FD990517D14 42 Report Format Version 3.0.2
TEST MODE Mode 2
FREQUENCY RANGE 1-12.65GHz
DETECTOR FUNCTION & RESOLUTION BANDWIDTH
Peak/ Average , 1MHz
ENVIRONMENTAL CONDITIONS
17 deg. C, 70% RH, 1009hPa
TESTED BY: Bull Cheng
ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M
No. Freq. (MHz)
Emission Level
(dBuV/m)
Limit (dBuV/m)
Margin (dB)
Antenna Height
(m)
Table Angle
(Degree)
Raw Value
(dBuV)
Correction Factor (dB/m)
1 1620.08 45.83 PK 74.00 -28.17 1.70 V 184 16.54 29.29 2 1620.08 36.43 AV 54.00 -17.57 1.70 V 184 7.14 29.29 3 2160.05 49.83 PK 74.00 -24.17 1.00 V 165 18.13 31.70 4 2160.05 42.07 AV 54.00 -11.93 1.00 V 165 10.37 31.70 5 4483.52 47.48 PK 74.00 -26.52 1.35 V 227 8.85 38.63 6 4483.52 39.93 AV 54.00 -14.07 1.35 V 227 1.30 38.63
REMARKS: 1. Emission level(dBuV/m)=Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor (dB/m) + Cable Factor (dB) 3. The other emission levels were very low against the limit.
4. Margin value = Emission level – Limit value.
Report No.: FD990517D14 43 Report Format Version 3.0.2
4.2.9 TEST RESULTS (3)
TEST MODE Mode 3
FREQUENCY RANGE 30-1000 MHz
DETECTOR FUNCTION & RESOLUTION BANDWIDTH
Quasi-Peak, 120 kHz
ENVIRONMENTAL CONDITIONS
17 deg. C, 70% RH, 1009hPa
TESTED BY: Bull Cheng
ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 10 M
No. Freq. (MHz)
Emission Level
(dBuV/m)
Limit (dBuV/m)
Margin (dB)
Antenna Height
(m)
Table Angle
(Degree)
Raw Value
(dBuV)
Correction Factor (dB/m)
1 147.71 24.86 QP 30.00 -5.14 3.00 H 294 10.18 14.68 2 239.96 31.71 QP 37.00 -5.29 4.00 H 187 18.22 13.49 3 324.04 31.51 QP 37.00 -5.49 3.00 H 78 14.93 16.58 4 480.01 32.17 QP 37.00 -4.83 1.78 H 240 11.56 20.61 5 486.01 33.19 QP 37.00 -3.81 1.91 H 252 12.41 20.78 6 719.93 32.85 QP 37.00 -4.15 3.00 H 213 7.41 25.44 7 810.02 33.56 QP 37.00 -3.44 1.05 H 185 6.95 26.61 8 959.99 33.64 QP 37.00 -3.36 1.00 H 229 5.11 28.53
REMARKS: 1. Emission level(dBuV/m)=Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor (dB/m) + Cable Factor (dB) 3. The other emission levels were very low against the limit.
4. Margin value = Emission level – Limit value.
Report No.: FD990517D14 44 Report Format Version 3.0.2
TEST MODE Mode 3
FREQUENCY RANGE 30-1000 MHz
DETECTOR FUNCTION & RESOLUTION BANDWIDTH
Quasi-Peak, 120 kHz
ENVIRONMENTAL CONDITIONS
17 deg. C, 70% RH, 1009hPa
TESTED BY: Bull Cheng
ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 10 M
No. Freq. (MHz)
Emission Level
(dBuV/m)
Limit (dBuV/m)
Margin (dB)
Antenna Height
(m)
Table Angle
(Degree)
Raw Value
(dBuV)
Correction Factor (dB/m)
1 30.77 26.08 QP 30.00 -3.92 1.42 V 241 13.68 12.40 2 72.00 26.42 QP 30.00 -3.58 1.90 V 304 14.73 11.69 3 96.08 24.29 QP 30.00 -5.71 2.44 V 187 14.72 9.57 4 149.25 24.74 QP 30.00 -5.26 1.54 V 280 10.13 14.61 5 324.04 31.54 QP 37.00 -5.46 3.97 V 33 15.20 16.34 6 479.98 33.06 QP 37.00 -3.94 2.70 V 150 12.70 20.36 7 810.02 33.14 QP 37.00 -3.86 2.41 V 63 6.89 26.25 8 959.99 33.85 QP 37.00 -3.15 4.00 V 171 5.88 27.97 9 972.05 32.40 QP 37.00 -4.60 1.89 V 230 4.33 28.07
REMARKS: 1. Emission level(dBuV/m)=Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor (dB/m) + Cable Factor (dB) 3. The other emission levels were very low against the limit.
4. Margin value = Emission level – Limit value.
Report No.: FD990517D14 45 Report Format Version 3.0.2
TEST MODE Mode 3
FREQUENCY RANGE 1-12.5GHz
DETECTOR FUNCTION & RESOLUTION BANDWIDTH
Peak/ Average , 1MHz
ENVIRONMENTAL CONDITIONS
17 deg. C, 70% RH, 1009hPa
TESTED BY: Bull Cheng
ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M
No. Freq. (MHz)
Emission Level
(dBuV/m)
Limit (dBuV/m)
Margin (dB)
Antenna Height
(m)
Table Angle
(Degree)
Raw Value
(dBuV)
Correction Factor (dB/m)
1 1620.21 56.41 PK 74.00 -17.59 1.14 H 158 27.12 29.29 2 1620.21 37.00 AV 54.00 -17.00 1.14 H 158 7.71 29.29 3 1780.25 47.97 PK 74.00 -26.03 1.74 H 46 17.88 30.09 4 1780.25 36.99 AV 54.00 -17.01 1.74 H 46 6.90 30.09 5 2105.69 46.32 PK 74.00 -27.68 1.18 H 325 14.82 31.50 6 2105.69 35.55 AV 54.00 -18.45 1.18 H 325 4.05 31.50 7 2267.88 51.11 PK 74.00 -22.89 1.44 H 177 19.01 32.10 8 2267.88 42.42 AV 54.00 -11.58 1.44 H 177 10.32 32.10 9 2430.01 47.44 PK 74.00 -26.56 1.00 H 147 14.81 32.63
10 2430.01 40.75 AV 54.00 -13.25 1.00 H 147 8.12 32.63 11 4483.65 52.54 PK 74.00 -21.46 1.57 H 145 13.91 38.63 12 4483.65 44.54 AV 54.00 -9.46 1.57 H 145 5.91 38.63
REMARKS: 1. Emission level(dBuV/m)=Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor (dB/m) + Cable Factor (dB) 3. The other emission levels were very low against the limit.
4. Margin value = Emission level – Limit value.
Report No.: FD990517D14 46 Report Format Version 3.0.2
TEST MODE Mode 3
FREQUENCY RANGE 1-12.5GHz
DETECTOR FUNCTION & RESOLUTION BANDWIDTH
Peak/ Average , 1MHz
ENVIRONMENTAL CONDITIONS
17 deg. C, 70% RH, 1009hPa
TESTED BY: Bull Cheng
ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M
No. Freq. (MHz)
Emission Level
(dBuV/m)
Limit (dBuV/m)
Margin (dB)
Antenna Height
(m)
Table Angle
(Degree)
Raw Value
(dBuV)
Correction Factor (dB/m)
1 1620.10 57.21 PK 74.00 -16.79 1.00 V 355 27.92 29.29 2 1620.10 46.78 AV 54.00 -7.22 1.00 V 355 17.49 29.29 3 1782.02 53.38 PK 74.00 -20.62 1.00 V 220 23.28 30.10 4 1782.02 45.08 AV 54.00 -8.92 1.00 V 220 14.98 30.10 5 1944.03 48.88 PK 74.00 -25.12 1.00 V 230 17.98 30.90 6 1944.03 37.23 AV 54.00 -16.77 1.00 V 225 6.33 30.90 7 2268.07 54.14 PK 74.00 -19.86 1.40 V 63 22.04 32.10 8 2268.07 42.02 AV 54.00 -11.98 1.40 V 63 9.92 32.10 9 2430.08 44.55 PK 74.00 -29.45 1.00 V 269 11.92 32.63
10 2430.08 36.71 AV 54.00 -17.29 1.00 V 269 4.08 32.63 11 4480.07 51.93 PK 74.00 -22.07 1.00 V 56 13.30 38.63 12 4480.07 39.78 AV 54.00 -14.22 1.00 V 56 1.15 38.63
REMARKS: 1. Emission level(dBuV/m)=Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor (dB/m) + Cable Factor (dB) 3. The other emission levels were very low against the limit.
4. Margin value = Emission level – Limit value.
Report No.: FD990517D14 47 Report Format Version 3.0.2
4.2.10 TEST RESULTS (4)
TEST MODE Mode 4
FREQUENCY RANGE 30-1000 MHz
DETECTOR FUNCTION & RESOLUTION BANDWIDTH
Quasi-Peak, 120 kHz
ENVIRONMENTAL CONDITIONS
17 deg. C, 70% RH, 1009hPa
TESTED BY: Bull Cheng
ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 10 M
No. Freq. (MHz)
Emission Level
(dBuV/m)
Limit (dBuV/m)
Margin (dB)
Antenna Height
(m)
Table Angle
(Degree)
Raw Value
(dBuV)
Correction Factor (dB/m)
1 90.75 24.02 QP 30.00 -5.98 3.96 H 325 14.95 9.07 2 122.25 26.55 QP 30.00 -3.45 3.45 H 136 14.26 12.29 3 144.16 26.54 QP 30.00 -3.46 3.57 H 34 12.17 14.37 4 182.05 25.87 QP 30.00 -4.13 3.41 H 355 12.68 13.19 5 213.79 26.68 QP 30.00 -3.32 3.41 H 211 14.26 12.42 6 223.00 24.94 QP 30.00 -5.06 3.00 H 145 12.15 12.79 7 324.04 31.22 QP 37.00 -5.78 3.50 H 265 14.64 16.58 8 479.97 31.11 QP 37.00 -5.89 1.45 H 284 10.50 20.61 9 648.05 33.29 QP 37.00 -3.71 1.57 H 289 9.03 24.26
10 719.93 33.44 QP 37.00 -3.56 3.92 H 247 8.00 25.44 11 786.84 31.17 QP 37.00 -5.83 1.53 H 199 4.86 26.31 12 810.03 33.72 QP 37.00 -3.28 1.73 H 31 7.11 26.61 13 959.97 32.22 QP 37.00 -4.78 1.00 H 100 3.69 28.53 14 971.99 33.41 QP 37.00 -3.59 1.00 H 187 4.76 28.65
REMARKS: 1. Emission level(dBuV/m)=Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor (dB/m) + Cable Factor (dB) 3. The other emission levels were very low against the limit.
4. Margin value = Emission level – Limit value.
Report No.: FD990517D14 48 Report Format Version 3.0.2
TEST MODE Mode 4
FREQUENCY RANGE 30-1000 MHz
DETECTOR FUNCTION & RESOLUTION BANDWIDTH
Quasi-Peak, 120 kHz
ENVIRONMENTAL CONDITIONS
17 deg. C, 70% RH, 1009hPa
TESTED BY: Bull Cheng
ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 10 M
No. Freq. (MHz)
Emission Level
(dBuV/m)
Limit (dBuV/m)
Margin (dB)
Antenna Height
(m)
Table Angle
(Degree)
Raw Value
(dBuV)
Correction Factor (dB/m)
1 30.77 22.03 QP 30.00 -7.97 1.25 V 231 9.63 12.40 2 72.04 25.16 QP 30.00 -4.84 2.50 V 100 13.48 11.68 3 97.50 24.31 QP 30.00 -5.69 2.00 V 158 14.62 9.69 4 154.94 24.86 QP 30.00 -5.14 1.00 V 340 10.30 14.56 5 225.16 26.84 QP 30.00 -3.16 1.50 V 339 14.31 12.53 6 360.04 32.79 QP 37.00 -4.21 3.50 V 164 15.72 17.07 7 479.99 33.07 QP 37.00 -3.93 3.00 V 161 12.71 20.36 8 648.05 31.74 QP 37.00 -5.26 2.50 V 145 7.88 23.86 9 720.00 33.47 QP 37.00 -3.53 3.99 V 239 8.43 25.04
10 810.05 32.92 QP 37.00 -4.08 2.00 V 139 6.67 26.25 11 959.99 33.50 QP 37.00 -3.50 1.48 V 165 5.53 27.97 12 972.01 32.86 QP 37.00 -4.14 1.48 V 168 4.79 28.07
REMARKS: 1. Emission level(dBuV/m)=Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor (dB/m) + Cable Factor (dB) 3. The other emission levels were very low against the limit.
4. Margin value = Emission level – Limit value.
Report No.: FD990517D14 49 Report Format Version 3.0.2
TEST MODE Mode 4
FREQUENCY RANGE 1-12.5GHz
DETECTOR FUNCTION & RESOLUTION BANDWIDTH
Peak/ Average , 1MHz
ENVIRONMENTAL CONDITIONS
17 deg. C, 70% RH, 1009hPa
TESTED BY: Bull Cheng
ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M
No. Freq. (MHz)
Emission Level
(dBuV/m)
Limit (dBuV/m)
Margin (dB)
Antenna Height
(m)
Table Angle
(Degree)
Raw Value
(dBuV)
Correction Factor (dB/m)
1 1620.05 50.22 PK 74.00 -23.78 1.09 H 230 20.93 29.29 2 1620.05 40.85 AV 54.00 -13.15 1.09 H 230 11.56 29.29 3 1782.06 47.84 PK 74.00 -26.16 1.38 H 292 17.74 30.10 4 1782.06 45.22 AV 54.00 -8.78 1.38 H 292 15.12 30.10 5 2268.01 49.93 PK 74.00 -24.07 1.26 H 233 17.83 32.10 6 2268.01 39.13 AV 54.00 -14.87 1.26 H 233 7.03 32.10 7 2430.09 48.31 PK 74.00 -25.69 1.03 H 175 15.68 32.63 8 2430.09 35.52 AV 54.00 -18.48 1.03 H 175 2.89 32.63 9 3240.05 48.73 PK 74.00 -25.27 1.00 H 169 12.99 35.74
10 3240.05 41.11 AV 54.00 -12.89 1.00 H 169 5.37 35.74 REMARKS: 1. Emission level(dBuV/m)=Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor (dB/m) + Cable Factor (dB) 3. The other emission levels were very low against the limit.
4. Margin value = Emission level – Limit value.
Report No.: FD990517D14 50 Report Format Version 3.0.2
TEST MODE Mode 4
FREQUENCY RANGE 1-12.5GHz
DETECTOR FUNCTION & RESOLUTION BANDWIDTH
Peak/ Average , 1MHz
ENVIRONMENTAL CONDITIONS
17 deg. C, 70% RH, 1009hPa
TESTED BY: Bull Cheng
ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M
No. Freq. (MHz)
Emission Level
(dBuV/m)
Limit (dBuV/m)
Margin (dB)
Antenna Height
(m)
Table Angle
(Degree)
Raw Value
(dBuV)
Correction Factor (dB/m)
1 1458.02 49.31 PK 74.00 -24.69 1.00 V 161 20.80 28.51 2 1458.02 44.62 AV 54.00 -9.38 1.00 V 161 16.11 28.51 3 1620.03 52.31 PK 74.00 -21.69 1.70 V 348 23.02 29.29 4 1620.03 45.02 AV 54.00 -8.98 1.70 V 348 15.73 29.29 5 1782.00 45.31 PK 74.00 -28.69 1.40 V 360 15.21 30.10 6 1782.00 38.53 AV 54.00 -15.47 1.40 V 360 8.43 30.10 7 2268.01 49.52 PK 74.00 -24.48 1.62 V 0 17.42 32.10 8 2268.01 38.19 AV 54.00 -15.81 1.60 V 0 6.09 32.10 9 2430.10 51.21 PK 74.00 -22.79 1.40 V 153 18.58 32.63
10 2430.10 37.38 AV 54.00 -16.62 1.40 V 153 4.75 32.63 11 4481.87 50.08 PK 74.00 -23.92 1.00 V 189 11.45 38.63 12 4481.87 39.61 AV 54.00 -14.39 1.00 V 189 0.98 38.63
REMARKS: 1. Emission level(dBuV/m)=Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor (dB/m) + Cable Factor (dB) 3. The other emission levels were very low against the limit.
4. Margin value = Emission level – Limit value.
Report No.: FD990517D14 51 Report Format Version 3.0.2
5 PHOTOGRAPHS OF THE TEST CONFIGURATION
CONDUCTED EMISSION TEST
Report No.: FD990517D14 52 Report Format Version 3.0.2
RADIATED EMISSION TEST
<Frequency Range 30MHz ~ 1GHz >
Report No.: FD990517D14 53 Report Format Version 3.0.2
RADIATED EMISSION TEST
<Frequency Range above 1GHz>
Report No.: FD990517D14 54 Report Format Version 3.0.2
6 INFORMATION ON THE TESTING LABORATORIES
We, Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, were founded in 1988 to provide our best service in EMC, Radio, Telecom and Safety consultation. Our laboratories are accredited and approved according to ISO/IEC 17025:
Copies of accreditation certificates of our laboratories obtained from approval agencies can be downloaded from our web site: www.adt.com.tw/index.5/phtml. If you have any comments, please feel free to contact us at the following:
Linko EMC/RF Lab: Tel: 886-2-26052180 Fax: 886-2-26051924
Hsin Chu EMC/RF Lab: Tel: 886-3-5935343 Fax: 886-3-5935342
Hwa Ya EMC/RF/Safety/Telecom Lab: Tel: 886-3-3183232 Fax: 886-3-3185050
Email: [email protected] Web Site: www.adt.com.tw
The address and road map of all our labs can be found in our web site also.
Report No.: FD990517D14 55 Report Format Version 3.0.2
7 APPENDIX A – MODIFICATIONS RECORDERS FOR ENGINEERING CHANGES TO THE EUT BY THE LAB
No any modifications are made to the EUT by the lab during the test.
---END---