fbg-1701 user instruction · gizmo regulatory compliance statement this device complies with part...

18
FBG-1701 User instruction FBG-1701 is touch panel controller that consist of CPU board, Carrier board, I/O board, LED board, speaker and LCD screen with touch panel. I/O board includes DC power jack, Primary RJ45 10/100/1G Ethernet with POE interface, Secondary RJ45 10/100/1G Ethernet interface, 2x USB 3.0 interfaces and HDMI interface. LED board includes LED, LED driver, digital microphone and NFC (NFC tag type 1-4)/Bluetooth (4.0) controllers. FBG-1701 has the aspect ratio 16:10, operate from either Ethernet POE or DC (Jack) power (12V to 24Vdc), less than 3W power consumption. Wall mounted brackets are included to support mounting on the wall.

Upload: others

Post on 01-Apr-2021

1 views

Category:

Documents


0 download

TRANSCRIPT

  • FBG-1701 User instruction FBG-1701 is touch panel controller that consist of CPU board, Carrier board, I/O board, LED board, speaker and LCD screen with touch panel. I/O board includes DC power jack, Primary RJ45 10/100/1G Ethernet with POE interface, Secondary RJ45 10/100/1G Ethernet interface, 2x USB 3.0 interfaces and HDMI interface. LED board includes LED, LED driver, digital microphone and NFC (NFC tag type 1-4)/Bluetooth (4.0) controllers. FBG-1701 has the aspect ratio 16:10, operate from either Ethernet POE or DC (Jack) power (12V to 24Vdc), less than 3W power consumption. Wall mounted brackets are included to support mounting on the wall.

  • For Wall mount

  • Bracket usuage –Side mount

  • Panel mount

  • Panel mount (Large space)

  • GIZMO Regulatory Compliance Statement

    This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver

    is connected. Consult the dealer or an experienced radio/TV technician for help.

  • Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. FCC Caution: Any changes or modifications not expressly approved by the party responsible for

    compliance could void the user's authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other

    antenna or transmitter.

    CISPR 32 Class B Statement

    Products bearing the CE marking comply with the following EU Directives as applicable: EMC Directive 2014/30/EU

    This equipment complies with the requirements of CISPR 32 (EN 55032) for Class B Information Technology Equipment (ITE).

    This system has been evaluated for RF exposure for Humans in reference to the ICNIRP (International Commission on Non-Ionizing Radiation Protection) limits. The evaluation was based on the EN 50385 Product Standard to Demonstrate Compliance of Radio Base stations and Fixed Terminals for Wireless Telecommunications Systems with basic restrictions or reference levels related to Human Exposure to Radio Frequency Electromagnetic Fields from zis 20cm (7.9 inches).

    This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:

    1) this device may not cause interference, and 2) this device must accept any interference, including interference that may cause

    undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes:

    1) l'appareil ne doit pas produire de brouillage, et 2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le

    brouillage est susceptible d'en compromettre le fonctionnement. This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

    This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter, except tested built-in radios. Cet appareil et son antenne ne doivent pas être situés ou fonctionner en conjonction avec une autre antenne ou un autre émetteur, exception faites des radios intégrées qui ont été testées.

  • The County Code Selection feature is disabled for products marketed in the US/ Canada. La fonction de sélection de l'indicatif du pays est désactivée pour les produits commercialisés aux États-Unis et au Canada.

    Radiation Exposure Statement: This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Déclaration d'exposition aux radiations: Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps. Korea Compliance Statements

    This equipment is limited for indoor use.

  • Administrative Rules for Low-power Radio-Frequency Devices Article 12 For those low-power radio-frequency devices that have already received a type-approval, companies, business units or users should not change its frequencies, increase its power or change its original features and functions. Article 14 The operation of the low-power radio-frequency devices is subject to the conditions that no harmful interference is caused to aviation safety and authorized radio station; and if interference is caused, the user must stop operating the device immediately and can't re-operate it until the harmful interference is clear. The authorized radio station means a radio-communication service operating in accordance with the Communication Act. The operation of the low-power radio-frequency devices is subject to the interference caused by the operation of an authorized radio station, by another intentional or unintentional radiator, by industrial, scientific and medical (ISM) equipment, or by an incidental radiator. ANATEL Este equipamento opera em caráter secundário, isto é, não tem direito a proteção contra interferência prejudicial, mesmo de estações do mesmo tipo, e não pode causar interferência a sistemas operando em caráter primário. English Translation This equipment operates on a secondary basis and consequently must accept harmful interference, including interference from stations of the same kind. This equipment may not cause harmful interference to systems operating on a primary basis.

    3C產品警語

  • 「具顯示面板之3C 產品」商品標示「警語及注意事項」之內容與方式,說明如下:

    1.警語(於產品本體、說明書及外包裝標示):使用過度恐傷害視力。

    2.注意事項(於產品說明書及外包裝標示):

    (1) 使用30 分鐘請休息10 分鐘。

    (2) 2 歲以下幼兒不看螢幕,2 歲以上每天看螢幕不要超過1 小時。

  • This is a Class B product based on the standard of the VCCI Council. If this is used near a radio or television receiver in a domestic environment, it may cause radio Interference. Install and use the equipment according to the instruction manual.