fast crank lifting system - ketterer getriebe fast crank lifting system 3052 description crank...
TRANSCRIPT
Technical Data
Crank lifting system Lifting unit Connecting
tube Brake unit Deflection gear Deflection gear with brake unit
Ratio 1:1 ø 15 1:1 1:1
Stroke 500 mm
Recommended table load
0 – 40 kg
Retracted length 625 mm customized customized customized customized
Item number 3052.00-0002 3052.40- V01LXXXX
3052.09-V01AXXX
3052.00- V01AXXX
3052.00- V02AXXX
Fast crank lifting system 3052
DescriptionCrank lifting system for fast height adjustment of sit- stand workplaces. Mechanical synchro-nization of two spindle lift drives with crank, brake unit, deflection gear and connecting tube. The system is suitable for 2-leg table frames with high efficiency of the guide units. Convenient adjustment with up to 40 kg table loads is ensured. The lift of 500 mm meets the requirements of the new standard for sitting-standing workplaces.
Special featuresThe system consists of a modular design allowing trouble-free assembly of the table by the end customer.
Connecting tube and deflection gear are attached only during final assembly. This permits shipping the tables in the customary manner worldwide with minimum package dimensions.
Customer specificThe length of the connecting tube is adjusted indi- vidually, depending on the spacing of the table legs. The units can also be furnished with other spring forces.
Safety instuctionGas springs can develope high acceleration forces. Please handle the assembly and this disassembly with care and diligence.
Fast crank lifting system
Man
ual S
pind
le D
rives
3052
3052.75-02/20170619
3052.00-0002
Crank handle5187.00-0032
Brake unit3052.09-V01AXXX
Connecting tube3052.40-V01LXXXX
Deflection gear3052.00-V01AXXX
Fast crank lifting system 3052
3052.75-02/20170619Dimensions in mm
39,8
Inst
alla
tion
leng
th E
= 6
2550
0 (to
tal s
troke
)Plug-in crank 5187.00-0032
Brake 3052.09-V01AXXX
Adapter (optional) 3052.19-05
View Y
Y
Sheet metal frame (customized, on request)
Deflection gear 3052.00-V01AXXX View X 25
39.4 33.3
23.4
39.8ø 4(2x) Trough holes for mounting screw M4
50,533
Lifting unit 3052.00-0002
ø 3.6x6.5 deep (4x)for srew M4 DIN 7500
View Z
12
9ø20
24
X
Pin ø 5.2/4 high (2x)
ø 4.4/12.5 deepMounting hole (2x)
for screw WN1452 K50x12
a
b
18
16.5
Brake 3052.09-V01AXXX
Deflection gear 3052.00-V01AXXX
Deflection gear with brake 3052.00-V02AXXX (optional)
hex
6
39.8
A
hex
6
39.4
ø10
39.8
33 25
10
16.5
ø 15
Connecting tube 3052.40.-V01LXXXX
L1= a + 4L2= b + 4
square 33
25.5
hex
9
Y
65.5
ø12
ø 3.6 x 6.5 deep (4x) for screw M4 DIN 7500 A
A
26
ø12
E +
500
(max
. len
gth
1125
)
hex
6
ø 4.1(2x)
25.5
square 33
ø 4(2x) Trough holes for mounting screw M4
Z