fast and reliable regulatory compliance screening
TRANSCRIPT
X-MET8000
Fast and reliable regulatory compliance screening
COMPLIANCEX-MET8000
• Rental analyser scheme on certain products
• Service repair at OiService centre
On-site, non-destructive analysis for rapid decision making
COMPLIANCE TESTING
X-MET8000 for the rapid and reliable
incoming inspection and screening of...
X-MET8000
Optimised calibrations for results you can trust
The X-MET8000 offers the best of both worlds with robust fundamental
parameters (FP) methods, and empirical calibrations (traceable to certified reference
materials) for superior precision and accuracy. The X-MET’s auto-detect “Mode”
identifies the sample type and automatically selects the correct calibration.
• Consumer products for restricted toxic elements
• Metal parts/fasteners for composition analysis
and grade verification
• Raw polymers and plastic items for Cl and Br
• Packaging material for Cd, Pb and Hg
• Electronic components, connectors, cables etc.
for Cd, Pb, Br, Hg, Cr and other elements
• Solder – incoming bar stock as well as ladle dips
and solder balls for Sn, Pb, Cu, Ag, Bi, Cd etc.
• High-reliability electronic components
to ensure the presence of required Pb levels
Pass-fail screen
Ultimate performance
• Conforms to IEC Method 62321, as per Consumer Product Safety Commission (CPSC) rules
• Low limits of detection for accurate trace elements analysis
• Accurate alloy identification, with the X-MET’s extensive, customisable grade library
• Optimum efficiency: lightweight (1.5kg), small, ergonomic design, with up to
10-12 hours battery life
• Fast start-up: be up and running in seconds
• Results in seconds: high measurement throughput for optimum productivity
X-MET8000
Verify compliance with: RoHS, CPSIA, ELV, WEEE, Halogen-free, EN 71-3, Prop 65, packaging etc.
COMPLIANCE TESTING
X-MET8000
Powerful data management
• Store up to 100,000 results including spectra and image
• Download results and reports directly to a USB memory stick, to a PC or a network share using Wifi, in a CSV format or
tamper-proof PDF for ultimate data integrity, or send results to a Bluetooth printer
• Create customised, professional looking reports using
the X-MET report generator (no software installation
needed): include company logo, sample image, results,
spectra, additional sample information (e.g. description,
location, batch number) etc.
Easy to use
• Quick-swap analysis window:
no tool required to change the
analysis window when broken
or dirty
• Intuitive, icon-driven user interface
• Large 4.3” colour touchscreen
for excellent results visibility
• Customisable results screen:
list elements of interest, and
colour-coded Pass/Fail messages
for quick decision making
• Define and modify elements
limits/action levels to remain in
line with current legislation
• Integrated camera for accurate
measurement positioning
• Optional small-spot collimator (3mm
diameter) to isolate specific features
from surrounding materials and
measure them accurately
• High-speed averaging for
inhomogeneous samples:
get a result that is representative
of the whole sample
Rugged and fit for purpose
X-MET8000
Bring the laboratory to the sample
This publication is the copyright of Oxford Instruments plc and provides outline information only, which (unless agreed by the company in writing) may not be used, applied or reproduced for any purpose or form part of any order or contract or regarded as the representation relating to the products or services concerned. Oxford Instruments’ policy is one of continued improvement. The company reserves the right to alter, without notice the specification, design or conditions of supply of any product or service. Oxford Instruments acknowledges all trademarks and registrations. © Oxford Instruments plc, 2016. All rights reserved. Part no: OIIA/126/0316
3806
ORGANISATION CERTIFIED BY
ISO 9001
As part of Oxford Instruments’ environmental policy this brochure has been printed on FSC paper
visit www.oxford-instruments.com/X-MET8000CG for more information or email: [email protected]
Oxford Instruments Customer Service recognises there are many decisions to make when choosing the right product and company
with which to partner. It is not just about superb instrument functionality or the rugged design of the analyser. The OiService teams are
aware of the necessity to demonstrate our depth of knowledge, skills, experience and expertise with regard to supporting our customers.
Oxford Instruments offers a range of support packages that provide you with the level of service you require:
• Technical help desk support
• Extended warranty contracts
• Tailored service plan agreements
Please ask about details of our comprehensive range of products or visit our website at: www.oxford-instruments.com/ia-customerservice
• World class training academy
• Genuine approved spare parts
• Consumable products Webshop
• Transform the X-MET8000
into a benchtop analyser with
the benchtop stand, for the
measurement of small, low density,
and irregular shape samples
• Light radiation shield and
background plate to minimise
scattered radiations from low-
density samples (e.g. plastics) and
optimise accuracy for thin samples
OiService - worldwide service and support
• Rental analyser scheme on certain products
• Service repair at OiService centre
Comprehensive range of accessories for optimum repeatability and user safety
• Measure small features or components
accurately and repeatably with the
X-MET’s small-spot collimator