faraday rotators in ligo - powering silicon valley · ligo faraday isolator design material with...
TRANSCRIPT
![Page 1: Faraday Rotators in LIGO - Powering Silicon Valley · LIGO Faraday Isolator Design Material with negative thermal lens compensates for thermal lensing in the magneto-optic crystal](https://reader031.vdocuments.us/reader031/viewer/2022021712/5ba1cc0a09d3f26b6b8d08d6/html5/thumbnails/1.jpg)
Document info
Case Study: Faraday Rotators in LIGO
Physics 208, Electro-opticsPeter Beyersdorf
1
![Page 2: Faraday Rotators in LIGO - Powering Silicon Valley · LIGO Faraday Isolator Design Material with negative thermal lens compensates for thermal lensing in the magneto-optic crystal](https://reader031.vdocuments.us/reader031/viewer/2022021712/5ba1cc0a09d3f26b6b8d08d6/html5/thumbnails/2.jpg)
Input Optics Overview
![Page 3: Faraday Rotators in LIGO - Powering Silicon Valley · LIGO Faraday Isolator Design Material with negative thermal lens compensates for thermal lensing in the magneto-optic crystal](https://reader031.vdocuments.us/reader031/viewer/2022021712/5ba1cc0a09d3f26b6b8d08d6/html5/thumbnails/3.jpg)
Requirements for LIGO faraday isolator
LASER INTERFEROMETER GRAVITATIONAL WAVE OBSERVATORY
LIGO Laboratory / LIGO Scientific Collaboration
LIGO-T050226-00-D ADVANCED LIGO 10/06/05
Faraday Isolator Specifications for Advanced LIGO
UF Group
Distribution of this document: LIGO Science Collaboration
This is an internal working note
of the LIGO Project.
California Institute of Technology LIGO Project – MS 18-34 1200 E. California Blvd.
Pasadena, CA 91125 Phone (626) 395-2129 Fax (626) 304-9834
E-mail: [email protected]
Massachusetts Institute of Technology LIGO Project – NW17-161
175 Albany St Cambridge, MA 02139 Phone (617) 253-4824 Fax (617) 253-7014
E-mail: [email protected]
LIGO Hanford Observatory P.O. Box 1970
Mail Stop S9-02 Richland WA 99352 Phone 509-372-8106 Fax 509-372-8137
LIGO Livingston Observatory
P.O. Box 940 Livingston, LA 70754
Phone 225-686-3100 Fax 225-686-7189
http://www.ligo.caltech.edu/
Optical Requirements
0-180 W CW power
Tforward>96%
Tbackwards>80%
“p” Input polarization
“p” output polarization
>38 dB power isolation
<5% coupling out of TEM00 mode
<100 μrad thermal beamsteering
![Page 4: Faraday Rotators in LIGO - Powering Silicon Valley · LIGO Faraday Isolator Design Material with negative thermal lens compensates for thermal lensing in the magneto-optic crystal](https://reader031.vdocuments.us/reader031/viewer/2022021712/5ba1cc0a09d3f26b6b8d08d6/html5/thumbnails/4.jpg)
Verdet Constant of Common Materials
![Page 5: Faraday Rotators in LIGO - Powering Silicon Valley · LIGO Faraday Isolator Design Material with negative thermal lens compensates for thermal lensing in the magneto-optic crystal](https://reader031.vdocuments.us/reader031/viewer/2022021712/5ba1cc0a09d3f26b6b8d08d6/html5/thumbnails/5.jpg)
Motivation for Terbium
Substances with paramagnetic ions (such as Terbium) have the largest Verdet constants. Maximum paramagnetism comes from lanthanide and actinide ions with maximum number of singly filled f shells
![Page 6: Faraday Rotators in LIGO - Powering Silicon Valley · LIGO Faraday Isolator Design Material with negative thermal lens compensates for thermal lensing in the magneto-optic crystal](https://reader031.vdocuments.us/reader031/viewer/2022021712/5ba1cc0a09d3f26b6b8d08d6/html5/thumbnails/6.jpg)
Mateial Properties of TGG
1.2 x 10-4
4.6 x 10-4
deg x gauss-1 x mm^-1
Terbium Gallium Garnet - TGG (Tb3Ga5O12)
Thermal conductivity is an order of magnitude
higher than for terbium doped glasses
Verdet constant is twice that of terbium
doped glasses
![Page 7: Faraday Rotators in LIGO - Powering Silicon Valley · LIGO Faraday Isolator Design Material with negative thermal lens compensates for thermal lensing in the magneto-optic crystal](https://reader031.vdocuments.us/reader031/viewer/2022021712/5ba1cc0a09d3f26b6b8d08d6/html5/thumbnails/7.jpg)
Typical Faraday Isolator Design
Large permanent magnet surrounds magneto-optic glass or crystal.
Amount of insertion of magneto-optic material in magnet can be adjusted to compensate change in birefringence asa function of wavelength.
Quartz rotator restores polarization of forward beam to match the input polarization.
Polarizers redirect retro-reflected beams
Quartz Rotator
PolarizerPolarizer
Magneto-optic
Permanent Magnet
![Page 8: Faraday Rotators in LIGO - Powering Silicon Valley · LIGO Faraday Isolator Design Material with negative thermal lens compensates for thermal lensing in the magneto-optic crystal](https://reader031.vdocuments.us/reader031/viewer/2022021712/5ba1cc0a09d3f26b6b8d08d6/html5/thumbnails/8.jpg)
Thermal Lensing
Parabolic radial temperature profile in optic leads to non-uniform thermal expansion producing “thermal lens”
![Page 9: Faraday Rotators in LIGO - Powering Silicon Valley · LIGO Faraday Isolator Design Material with negative thermal lens compensates for thermal lensing in the magneto-optic crystal](https://reader031.vdocuments.us/reader031/viewer/2022021712/5ba1cc0a09d3f26b6b8d08d6/html5/thumbnails/9.jpg)
Temp dependence of Verdet Constant
Temperature gradient in crystal due to beam profile results in a non-uniform polarization rotation
TEM00 mode power distribution and thermally induced strain field
parabolic distribution of depolarization
![Page 10: Faraday Rotators in LIGO - Powering Silicon Valley · LIGO Faraday Isolator Design Material with negative thermal lens compensates for thermal lensing in the magneto-optic crystal](https://reader031.vdocuments.us/reader031/viewer/2022021712/5ba1cc0a09d3f26b6b8d08d6/html5/thumbnails/10.jpg)
Stress Induced Birefringence
Like high power rod lasers, stress induced birefringence causes depolarization
TEM00 mode power distribution and thermally induced strain field
Spatial map of polarization conversion by stress induced birefringence
![Page 11: Faraday Rotators in LIGO - Powering Silicon Valley · LIGO Faraday Isolator Design Material with negative thermal lens compensates for thermal lensing in the magneto-optic crystal](https://reader031.vdocuments.us/reader031/viewer/2022021712/5ba1cc0a09d3f26b6b8d08d6/html5/thumbnails/11.jpg)
LIGO Faraday Isolator Design
Material with negative thermal lens compensates for thermal lensing in the magneto-optic crystal (TGG)
Quartz rotator (λ/2 plate at 22.5°) is placed between the two halves of the TGG crystal, allowing one crystal to compensate for the depolarization in the other one.
Thin Film Polarizers replace cube polarizers to reduce thermal drift of beam steering
Thin FilmPolarizer
TGG
Permanent Magnet
TGG
Quartz Rotator
-dn/dt material
Thin FilmPolarizer
![Page 12: Faraday Rotators in LIGO - Powering Silicon Valley · LIGO Faraday Isolator Design Material with negative thermal lens compensates for thermal lensing in the magneto-optic crystal](https://reader031.vdocuments.us/reader031/viewer/2022021712/5ba1cc0a09d3f26b6b8d08d6/html5/thumbnails/12.jpg)
LIGO Faraday Isolator Design LIGO faraday Isolator Design
![Page 13: Faraday Rotators in LIGO - Powering Silicon Valley · LIGO Faraday Isolator Design Material with negative thermal lens compensates for thermal lensing in the magneto-optic crystal](https://reader031.vdocuments.us/reader031/viewer/2022021712/5ba1cc0a09d3f26b6b8d08d6/html5/thumbnails/13.jpg)
LIGO Faraday Isolator Picture
LIGO faraday Isolator Design
![Page 14: Faraday Rotators in LIGO - Powering Silicon Valley · LIGO Faraday Isolator Design Material with negative thermal lens compensates for thermal lensing in the magneto-optic crystal](https://reader031.vdocuments.us/reader031/viewer/2022021712/5ba1cc0a09d3f26b6b8d08d6/html5/thumbnails/14.jpg)
Faraday Isolator Performance
![Page 15: Faraday Rotators in LIGO - Powering Silicon Valley · LIGO Faraday Isolator Design Material with negative thermal lens compensates for thermal lensing in the magneto-optic crystal](https://reader031.vdocuments.us/reader031/viewer/2022021712/5ba1cc0a09d3f26b6b8d08d6/html5/thumbnails/15.jpg)
Faraday Isolator Performance
![Page 16: Faraday Rotators in LIGO - Powering Silicon Valley · LIGO Faraday Isolator Design Material with negative thermal lens compensates for thermal lensing in the magneto-optic crystal](https://reader031.vdocuments.us/reader031/viewer/2022021712/5ba1cc0a09d3f26b6b8d08d6/html5/thumbnails/16.jpg)
Faraday Isolator Performance
![Page 17: Faraday Rotators in LIGO - Powering Silicon Valley · LIGO Faraday Isolator Design Material with negative thermal lens compensates for thermal lensing in the magneto-optic crystal](https://reader031.vdocuments.us/reader031/viewer/2022021712/5ba1cc0a09d3f26b6b8d08d6/html5/thumbnails/17.jpg)
Faraday Isolator Performance
Depolarization ratio (γ) measued versus input power for traditional configuration (a) and LIGO configuration (c)
Faraday isolators at high average power is determined bythe photoelastic effect rather than by the temperature de-pendence of the Verdet constant. In addition, the depo-larization ratio in the dual-glass-based isolation methodsdemonstrated here is significantly lower than in the tra-ditional method. The geometry shown in Fig. 1(c) is mostoptimal, reducing the depolarization ratio by two ordersof magnitude with respect to the single-isolator method.These experimental results confirm the possibility of de-signing a Faraday isolator based on glass magneto-optical
elements with isolation of 30 dB at an average laserpower of hundreds of watts. Such isolators will be usefulin applications such as gravitational-wave inter-ferometry11–14 that require both high-power lasers andhigh isolation ratios.
ACKNOWLEDGMENTSD. H. Reitze gratefully acknowledges the support of theNational Science Foundation (PHY 97-22114) in supportof this research.
REFERENCES1. R. J. Shine, A. J. Alfrey, and R. L. Byer, ‘‘40-W cw,
TEM00-mode, diode-laser-pumped, Nd-YAG miniature-slablaser,’’ Opt. Lett. 20, 459–461 (1995).
2. S. A. Payne, R. J. Beach, C. Bibeau, C. A. Ebbers, M. A.Emanuel, E. C. Honea, C. D. Marshall, R. H. Page, K. I.Schaffers, J. A. Skidmore, S. B. Sutton, and W. F. Krupke,‘‘Diode arrays, crystals, and thermal management for solid-state lasers,’’ IEEE J. Sel. Top. Quantum Electron. 3, 71–81(1997).
3. A. N. Malshakov, G. A. Pasmanik, and A. K. Potemkin,‘‘Comparative characteristics of magneto-optical materi-als,’’ Appl. Opt. 36, 6403–6410 (1997).
4. N. P. Barnes and L. P. Petway, ‘‘Variation of the Verdetconstant with temperature of terbium gallium garnet,’’ J.Opt. Soc. Am. B 9, 1912–1915 (1992).
5. J. D. Foster and L. M. Osterink, ‘‘Thermal effects in aNd:YAG laser,’’ J. Appl. Phys. 41, 3656–3663 (1970).
6. E. Khazanov, O. Kulagin, S. Yoshida, D. Tanner, and D. Re-itze, ‘‘Investigation of self-induced depolarization of laserradiation in terbium gallium garnet,’’ IEEE J. QuantumElectron. 35, 1116–1122 (1999).
7. E. A. Khazanov, ‘‘Compensation of thermally induced polar-ization distortions in Faraday isolators,’’ Quantum Elec-tron. 29, 59–64 (1999) [Kvant. Elektron. (Moscow) 26,59–64 (1999)].
8. K. Shiraishi, F. Tajima, and S. Kawakami, ‘‘Compact Fara-day rotator for an optical isolator using magnets arrangedwith alternating polarities,’’ Opt. Lett. 11, 82–84 (1986).
9. W. A. Clarkson, N. S. Felgate, and D. C. Hanna, ‘‘Simplemethod for reducing depolarization loss resulting fromthermally induced birefringence in solid-state lasers,’’ Opt.Lett. 24, 820–822 (1999).
10. A. V. Mezenov, L. N. Soms, and A. I. Stepanov, Thermo-optics of Solid-State Lasers (Mashinostroenie, Leningrad,1986), p. 44.
11. A. Abramovici, W. E. Althouse, R. W. P. Drever, Y. Gursel,S. Kawamura, F. J. Raab, D. Shoemaker, L. Sievers, R. E.Spero, K. S. Thorne, R. E. Vogt, R. Weiss, S. E. Whitcomb,and M. E. Zucker, ‘‘LIGO—the laser interferometer gravi-tational wave observatory,’’ Science 256, 325–333 (1992).
12. A. Giazotto, ‘‘Wide-band measurement of gravitationalwaves—the Virgo Project,’’ Nuovo Cimento C 15, 955–971(1992).
13. M. V. Plissi, K. A. Strain, C. I. Torrie, N. A. Robertson, S.Killbourn, S. Rowan, S. M. Twyford, H. Ward, K. D. Skel-don, and J. Hough, ‘‘Aspects of the suspension system forGEO 600,’’ Rev. Sci. Instrum. 69, 3055–3061 (1998).
14. K. Kawabe, ‘‘Status of TAMA project,’’ Class. QuantumGrav. 14, 1477–1480 (1997).
Fig. 3. Images of the spatial profiles of the depolarized beamsafter transmission through the isolators for each geometryshown in (a) Figs 1(a), (b) Fig. 1(b), and (c) Fig. 1(c).
102 J. Opt. Soc. Am. B /Vol. 17, No. 1 /January 2000 Khazanov et al.
Faraday isolators at high average power is determined bythe photoelastic effect rather than by the temperature de-pendence of the Verdet constant. In addition, the depo-larization ratio in the dual-glass-based isolation methodsdemonstrated here is significantly lower than in the tra-ditional method. The geometry shown in Fig. 1(c) is mostoptimal, reducing the depolarization ratio by two ordersof magnitude with respect to the single-isolator method.These experimental results confirm the possibility of de-signing a Faraday isolator based on glass magneto-optical
elements with isolation of 30 dB at an average laserpower of hundreds of watts. Such isolators will be usefulin applications such as gravitational-wave inter-ferometry11–14 that require both high-power lasers andhigh isolation ratios.
ACKNOWLEDGMENTSD. H. Reitze gratefully acknowledges the support of theNational Science Foundation (PHY 97-22114) in supportof this research.
REFERENCES1. R. J. Shine, A. J. Alfrey, and R. L. Byer, ‘‘40-W cw,
TEM00-mode, diode-laser-pumped, Nd-YAG miniature-slablaser,’’ Opt. Lett. 20, 459–461 (1995).
2. S. A. Payne, R. J. Beach, C. Bibeau, C. A. Ebbers, M. A.Emanuel, E. C. Honea, C. D. Marshall, R. H. Page, K. I.Schaffers, J. A. Skidmore, S. B. Sutton, and W. F. Krupke,‘‘Diode arrays, crystals, and thermal management for solid-state lasers,’’ IEEE J. Sel. Top. Quantum Electron. 3, 71–81(1997).
3. A. N. Malshakov, G. A. Pasmanik, and A. K. Potemkin,‘‘Comparative characteristics of magneto-optical materi-als,’’ Appl. Opt. 36, 6403–6410 (1997).
4. N. P. Barnes and L. P. Petway, ‘‘Variation of the Verdetconstant with temperature of terbium gallium garnet,’’ J.Opt. Soc. Am. B 9, 1912–1915 (1992).
5. J. D. Foster and L. M. Osterink, ‘‘Thermal effects in aNd:YAG laser,’’ J. Appl. Phys. 41, 3656–3663 (1970).
6. E. Khazanov, O. Kulagin, S. Yoshida, D. Tanner, and D. Re-itze, ‘‘Investigation of self-induced depolarization of laserradiation in terbium gallium garnet,’’ IEEE J. QuantumElectron. 35, 1116–1122 (1999).
7. E. A. Khazanov, ‘‘Compensation of thermally induced polar-ization distortions in Faraday isolators,’’ Quantum Elec-tron. 29, 59–64 (1999) [Kvant. Elektron. (Moscow) 26,59–64 (1999)].
8. K. Shiraishi, F. Tajima, and S. Kawakami, ‘‘Compact Fara-day rotator for an optical isolator using magnets arrangedwith alternating polarities,’’ Opt. Lett. 11, 82–84 (1986).
9. W. A. Clarkson, N. S. Felgate, and D. C. Hanna, ‘‘Simplemethod for reducing depolarization loss resulting fromthermally induced birefringence in solid-state lasers,’’ Opt.Lett. 24, 820–822 (1999).
10. A. V. Mezenov, L. N. Soms, and A. I. Stepanov, Thermo-optics of Solid-State Lasers (Mashinostroenie, Leningrad,1986), p. 44.
11. A. Abramovici, W. E. Althouse, R. W. P. Drever, Y. Gursel,S. Kawamura, F. J. Raab, D. Shoemaker, L. Sievers, R. E.Spero, K. S. Thorne, R. E. Vogt, R. Weiss, S. E. Whitcomb,and M. E. Zucker, ‘‘LIGO—the laser interferometer gravi-tational wave observatory,’’ Science 256, 325–333 (1992).
12. A. Giazotto, ‘‘Wide-band measurement of gravitationalwaves—the Virgo Project,’’ Nuovo Cimento C 15, 955–971(1992).
13. M. V. Plissi, K. A. Strain, C. I. Torrie, N. A. Robertson, S.Killbourn, S. Rowan, S. M. Twyford, H. Ward, K. D. Skel-don, and J. Hough, ‘‘Aspects of the suspension system forGEO 600,’’ Rev. Sci. Instrum. 69, 3055–3061 (1998).
14. K. Kawabe, ‘‘Status of TAMA project,’’ Class. QuantumGrav. 14, 1477–1480 (1997).
Fig. 3. Images of the spatial profiles of the depolarized beamsafter transmission through the isolators for each geometryshown in (a) Figs 1(a), (b) Fig. 1(b), and (c) Fig. 1(c).
102 J. Opt. Soc. Am. B /Vol. 17, No. 1 /January 2000 Khazanov et al.
![Page 18: Faraday Rotators in LIGO - Powering Silicon Valley · LIGO Faraday Isolator Design Material with negative thermal lens compensates for thermal lensing in the magneto-optic crystal](https://reader031.vdocuments.us/reader031/viewer/2022021712/5ba1cc0a09d3f26b6b8d08d6/html5/thumbnails/18.jpg)
References
Güido Mueller, “Faraday Isolator Specifications for Advanced LIGO”, LIGO document number LIGO-T050226-00-D
Efim Khazanov, Nikolay Andreev, Alexey Babin, Alexander Kiselev, and Oleg Palashov, “Suppression of self-induced depolarization of high-power laser radiation in glass-based Faraday isolators”, JOSA B, Vol. 17, 2000
Yariv & Yeh “Optical Waves in Crystals” chapter 4