familyfun com halloween activities

Upload: alice187

Post on 05-Apr-2018

216 views

Category:

Documents


0 download

TRANSCRIPT

  • 7/31/2019 FamilyFun Com Halloween Activities

    1/44

    1

    2

    3

    4

    5

    67

    8

    9

    10

    11

    12

    13

    14

    15

    16

    1718

    19

    20

    21

    22

    23

    24

    25

    26

    27

    28

    29

    30

    31

    32

    33

    34

    3536

    c FamilyFun. com

  • 7/31/2019 FamilyFun Com Halloween Activities

    2/44

    1 of 2

    c FamilyFun.co

  • 7/31/2019 FamilyFun Com Halloween Activities

    3/44

    St ep 1: Pr int out t he skeleton on car d st ock.

    St ep 2: Wit h a small-sized brad, poke t hrough t heindicat ed holes and put t he bones t oget her .

    St ep 3: Once he is assembled, punch out t he hole near his hat

    and put a st r ing t hr ough t o hang him up as a door decor at ion.

    2 of 2

    c FamilyFun.com

  • 7/31/2019 FamilyFun Com Halloween Activities

    4/44

    1 of 2

    c Family Fun.

  • 7/31/2019 FamilyFun Com Halloween Activities

    5/44

    St ep 1: Cut out all t he pieces (grown-ups only).

    St ep 2: Place all t he pieces on your playing surf ace (t he whit e side should be f acing up).

    The obj ect of t he game is t o f ind all t he mat ching pair s of car ds.

    Opt ion 1: Playing by Your selfSelect t wo cards and t urn t hem over . I f bot h cards ar e t he same, r emove t hem f r omthe game and continue playing. If the cards dont match, turn them over and try again.The game is over when you have mat ched all of t he pairs and all of t he cards are gone.

    Opt ion 2: Playing wit h Two or MoreThe f ir st player select s t wo car ds and t ur ns them over . I f t he cards mat ch, t hey areremoved from the board. Play continues until he or she turns over cards that dontmatch. Then Player 2 begins his or her t urn. The game is over when all of t he cards are

    gone. The winner is t he player who has mat ched t he most cards.

    2 of 2

    c FamilyFun.

  • 7/31/2019 FamilyFun Com Halloween Activities

    6/44

    EEK!

    EEK!

    EEK!

    EEK!

    FamilyFun.comc

    1 of

  • 7/31/2019 FamilyFun Com Halloween Activities

    7/44

    FamilyFun.c

    2 o

    Spooky St icker sSt ep 1: Pr int out t emplat e on t o St icker Paper .

    St ep 2: Using scissors, cut out all the stickers (grown-ups only). Whenever youre ready touse the stickers, peel off the backing and stick em!

  • 7/31/2019 FamilyFun Com Halloween Activities

    8/44

    Help each wit ch f ind her mat ching broom bymaking your way t hrough t he t angled pat h.

    c FamilyFun.com

  • 7/31/2019 FamilyFun Com Halloween Activities

    9/44

    ANSWER KEY:

    c FamilyFun.

  • 7/31/2019 FamilyFun Com Halloween Activities

    10/44

    This kooky wit ch is cooking up somet hing spooky. Help her complet e t his myst er ious po

    4 bones, 4 wor ms, 3 mushr ooms, and 2 snails in t he pict ure. Then have f un color

    The Wit ch' s Br ew

  • 7/31/2019 FamilyFun Com Halloween Activities

    11/44

    c FamilyFun.

  • 7/31/2019 FamilyFun Com Halloween Activities

    12/44

    Bewitching MazeBewitching MazeBewitching MazeBewitching MazeHelp this witch find her way through the clouds to her

    partner-in-slime, who is whipping up a gooey potion!

    FamilyFunwww.familyfun.com

  • 7/31/2019 FamilyFun Com Halloween Activities

    13/44

    Halloween: Dr. Jekyll & M r. Hyde Co loring Page

    FamilyFun

    www.familyfun.com

    Color this picture to reveal both sides of this monsters split personality.

  • 7/31/2019 FamilyFun Com Halloween Activities

    14/44

    Answers:1.madscientist,2.frankenstein,3.testtubes,4.mutants,5.experiment

    Monster MadnessMonster MadnessMonster MadnessMonster Madness

    1. atmd tinsseic

    2. kantnesifern

    3. sett butes

    4. namutts

    5. minteepexr

    Magic Potions

    Using a pencil, find the matchingtest tubes below.

    Weird Science Scramble

    Unscramble the words below tounlock five secret words!

    Create-a-Monster

    Bring this monster to life by cutting out oneor all of the heads along the dotted lines.Paste your favorite below.

    FamilyFunwww.familyfun.com

  • 7/31/2019 FamilyFun Com Halloween Activities

    15/44

    St ep 1: Pr int out t emplat e on to St icker Paper.

    St ep 2: Cut t he bat s out and at t ach t hem t o clothespins wit h glue or

    double - st ick t ape. Then st ick t hem all over t he house or on your

    clot hes f or a spooky ef f ect -- kids will go bat t y f or t hem! c FamilyF

  • 7/31/2019 FamilyFun Com Halloween Activities

    16/44

    1

    glueg

    lue

    glueglue

    c FamilyFun

  • 7/31/2019 FamilyFun Com Halloween Activities

    17/44

    Make a Black Cat Hat

    c FamilyFun. co

    2 of 2

  • 7/31/2019 FamilyFun Com Halloween Activities

    18/44

    1

    c FamilyFun.com

  • 7/31/2019 FamilyFun Com Halloween Activities

    19/44

    Black Cat St r eamers

    St ep 1: Print on sticker paper following manufacturers instructions. Print as many as youwill want to use, depending on how much you want to cover or decorate in your project.(You can also print on regular paper and glue the stickers to each other if you prefer.)

    St ep 2: Let paper dry several minutes before handling.

    St ep 3: Grown-ups only: Cut lengths of fishing line to form your streamers -- vary thelengths if you like!

    St ep 4: Cut out your stickers (grown-ups only) and then stick them to each other in pairs,sandwiching the fishing line.

    2 of 2

    c FamilyFun.co

  • 7/31/2019 FamilyFun Com Halloween Activities

    20/44

    1

    2

    3

    4

    5

    6

    7

    8

    910

    11

    12

    13

    14

    15 16

    17

    18

    1920

    21

    22

    23

    24

    25

    26

    27

    28

    29

    30

    3132

    33

    34

    353637

    38

    39

    40

    41

    42

    43

    44

    45

    46

    47

    48

    49

    50

    51

    52

    53

    c FamilyFun. com

  • 7/31/2019 FamilyFun Com Halloween Activities

    21/44

    Dig up t he 15 hidden Halloween t erms in t his spooky wor d search.

    You can go up, down, backwards, and diagonal t o f ind t hem!Dig up t he 13 hidden Halloween t erms in t his spooky wor d sear ch.

    You can go up, down, backwards, and diagonal t o f ind t hem!

    c FamilyFun.

  • 7/31/2019 FamilyFun Com Halloween Activities

    22/44

    Dig up t he 13 hidden Halloween t erms in t his spooky wor d sear ch.

    You can go up, down, backwards, and diagonal t o f ind t hem!

    ANSWER KEY:

    c FamilyFun.

  • 7/31/2019 FamilyFun Com Halloween Activities

    23/44

    1 of 2

    c FamilyFun.com

  • 7/31/2019 FamilyFun Com Halloween Activities

    24/44

    St ep 1: Pr int out t emplat e on t o r egular paper or car d st ock.

    St ep 2: Using scissor s, cut along t he dot t ed line.

    St ep 3: Mix and mat ch em however you want t o creat e your very own spooky Halloweencreat ur e.

    2 of 2

    c FamilyFun. com

  • 7/31/2019 FamilyFun Com Halloween Activities

    25/44

    c FamilyFun. com

  • 7/31/2019 FamilyFun Com Halloween Activities

    26/44

    Help Fiona t he For t uneteller f or esee t he f ut ure by f igur ing outwhich shape comes next in each ser ies.

    1 2 3 4 5

    2 1 2 1

    2 4 6 8 10

    a.

    b.

    c.

    d.

    e.

    f .

    g.

    h.

    1

    c FamilyFun.

  • 7/31/2019 FamilyFun Com Halloween Activities

    27/44

    1 2 3 4 6 75

    2 1 2 21 1

    2 4 6 8 10 12 14

    a.

    b.

    c.

    d.

    e.

    f .

    g.

    h.

    2 of

    ANSWER KEY:

    c FamilyFun.

  • 7/31/2019 FamilyFun Com Halloween Activities

    28/44

  • 7/31/2019 FamilyFun Com Halloween Activities

    29/44

    One f r iend reads t he wor ds needed (noun, adject ive, et c. ) and t he ot herone gives an answer. Af t er t he t ale is complet ed, r ead it aloud!

    Its Halloween night! Im dressed as a __________

    (veget able) and my f r iends are going t r ick- or - t r eat ing as a

    __________ (boy costume) wearing tights and a one-eyed

    ____________ (girl costume). As we head out to trick-or-

    treat, a black __________ (animal) crosses our path. We

    fear its bad luck, but then we find a ___________ (number)

    dollar bill on the ground and start ___________-ing (verb).

    _____________-ing (verb) up to the first house, a big hairy

    _____________ (noun) lands on my friends ___________

    (body part). He screams ________ (silly word) and then we

    all start __________-ing (verb). We continue to the door

    where we get __________ (cereal) and __________ (two

    veget ables) in our t r eat bags. As we t ur n ar ound, a

    ________ (scary character) jumps out from behind a

    ___________(noun)! We scream and our __________ (body

    part) starts trembling. We realize its our friend

    ___________ (dogs name) and ________ (verb), then all of

    us continue trick-or-treating. Happy Halloween!

    c FamilyFun.

  • 7/31/2019 FamilyFun Com Halloween Activities

    30/44

  • 7/31/2019 FamilyFun Com Halloween Activities

    31/44

    St ep 1: Print out template on to card stock and glue on to paper bag tha

    St ep 2: Using scissors, cut out the eyeholes (grown-ups only).

    St ep 3: Place on childs head and get ready for some happy haunting!

  • 7/31/2019 FamilyFun Com Halloween Activities

    32/44

    Unscramble t he let t ers below to f indt welve scary creat ur esif you dar e!

    1.

    2.

    3.

    4.

    5.

    6.

    7.

    8.

    9.

    10.

    11.

    12.

    K I S N R A F E T E N N

    A L U D A C R

    H E T M Y U M M

    F A L O W N M

    T E H N E R A V

    N E N I S T F A K N E R S R E D I B

    H E S - L O F W

    L Y P C O S C

    A M I L E N A B O B W A N S O N M

    E H T L O B B

    P A W M S G H I N T

    D O G L I A Z L

    c FamilyFu

  • 7/31/2019 FamilyFun Com Halloween Activities

    33/44

    start

    1 o

    c FamilyFun

  • 7/31/2019 FamilyFun Com Halloween Activities

    34/44

    start

    2 of 2ANSWER KEY:

    c FamilyFun. com

  • 7/31/2019 FamilyFun Com Halloween Activities

    35/44

    start

    This mummys all wrapped up! Make your way through the maze to help him get untangled.

    1

    c FamilyFun

  • 7/31/2019 FamilyFun Com Halloween Activities

    36/44

    start

    2 o

    ANSWER KEY:

    c FamilyFun.

  • 7/31/2019 FamilyFun Com Halloween Activities

    37/44

    Halloween: Ba t Pumpkin Ca rving Tem plate Page 1

    FamilyFun

    www.familyfun.com

  • 7/31/2019 FamilyFun Com Halloween Activities

    38/44

    Halloween: Pumpkin Carving Instructions Page 2

    FamilyFun

    www.familyfun.com

    Step 1: To make a lid, draw a circle or a hexagon at least 5 inches in diameter around the pumpkin's

    stem. Cut out the lid at an angle (so that the outside edge is larger than the inside) to keep it from

    slipping inside. For a carving tool, we recommend a pumpkin saw. Those using knives should carve

    gently and steadily. (Tip: Don't slide the knife all the way out of the pumpkin.)

    Step 2: When the lid is free, scrape it clean of seeds and pulp with a large metal spoon or an ice-

    cream scoop. Instead of removing the top, you may choose to remove a section from the bottom or

    side of the pumpkin. (This works well for an unstable or small pumpkin, or for certain designs.)

    Step 3: Scrape until you've had enough or until the wall is 1 to 1 1/2 inches thick (stop before you

    compromise the strength of the walls).

    Step 4: At the base, flatten a spot for the candle (again, don't make it too thin, or the bottom will rot).

    Step 5: There are two ways to transfer your design onto the pumpkin. One is to copy it freehand

    onto a clean, dry pumpkin with a water-based marker (mistakes can be easily corrected with a papertowel). The other is to tape your pattern or template to the pumpkin, then score the design into the

    skin by poking holes through the pattern with a nail or plastic poking tool (available in some

    pumpkin-carving kits).

    Step 6: The black portion of the image is the part of the pumpkin that youll be cutting out and

    removing. Carve by starting at the center of your design and working outward (this avoids putting

    pressure on areas already carved). Begin with the innermost and smallest features -- eyes before

    eyebrows, for instance -- and try to carve the inside lines of each feature before the outside lines. Be

    gentle: If you're using a knife, run it over each line a few times, rather than pushing all the way

    through. Don't cut all the way to the end of a line on the first cut. As each shape loosens up, gently

    push it out of the pumpkin with a finger or a dull pencil point (a good job for small kids). Larger

    shapes, such as gap-toothed grins, may have to be removed in pieces.

    Tip: If you cut something you didn't intend to, perform an ad hoc pumpkin surgery: Stick a toothpick

    through the flesh side of the piece and fit it back into place.

    Step 7: You can create dramatic effects by letting candlelight through the pumpkin in varying inten-

    sity. For a shaded effect, don't cut all the way through the pumpkin. Instead, make a shallow, angled

    (or V-shaped) cut (1/8 to 1/2 inch, depending on the thickness of the pumpkin wall), then peel away

    the outer flesh with a knife tip, spoon or vegetable peeler. You also can use deep, angled cuts to

    remove larger pieces, so that the light reflects off the walls of the hole.

    Step 8: Place a candle inside your pumpkin (votives are more stable than tapers). Light the candle,

    put on the lid and turn out the lights. If the candle doesn't stay lit, increase the air supply either by

    enlarging some of the features or by carving a vent on the back of the lid.

    Lastly, put your jack-o'-lantern in a place of honor (away from flammables) and remember to blow out

    all candles before you go to sleep.

  • 7/31/2019 FamilyFun Com Halloween Activities

    39/44

    1 o

    c FamilyFu

  • 7/31/2019 FamilyFun Com Halloween Activities

    40/44

    St ep 1: To make a lid, dr aw a cir cle or a hexagon at least 5 inches in diamet er ar ound t hepumpkin' s st em. Cut out t he lid at an angle (so t hat t he out side edge is lar ger t han t heinside) t o keep it f r om slipping inside. For a car ving t ool, we recommend a pumpkin saw.Those using knives should car ve gent ly and st eadily. (Tip: Don' t slide t he knif e all t he wayout of t he pumpkin.)

    St ep 2: When t he lid is f r ee, scrape it clean of seeds and pulp wit h a large met al spoon oran ice-cream scoop. I nst ead of r emoving the t op, you may choose t o remove a sect ion f r omt he bot t om or side of t he pumpkin. (This works well f or an unst able or small pumpkin, or f orcer t ain designs.)

    St ep 3: Scrape unt il you' ve had enough or unt il t he wall i s 1 t o 1 1/ 2 inches t hick (st opbef ore you compromise t he st r ength of t he walls).

    St ep 4: At t he base, f lat t en a spot f or t he candle (again, don' t make it t oo t hin, or t hebot t om will rot ).

    St ep 5: There are t wo ways t o t r ansf er your design ont o t he pumpkin. One is t o copy itf r eehand onto a clean, dr y pumpkin wit h a wat er -based marker (mist akes can be easilycor rect ed wit h a paper t owel). The ot her is t o tape your pat t ern or t emplat e t o t he pump-kin, t hen score t he design int o t he skin by poking holes t hrough t he pat t ern wit h a nail orplast ic poking t ool (available in some pumpkin-carving kit s).

    St ep 6: Carve by star t ing at t he cent er of your design and work out war d (t his avoids put -t ing pressure on ar eas alr eady carved). Begin wit h t he innermost and smallest f eat ur es --eyes bef or e eyebrows, f or inst ance -- and t r y t o car ve t he inside lines of each f eat urebef ore t he out side lines. Be gent le: I f you' r e using a knif e, r un it over each line a f ew

    t imes, r at her t han pushing all t he way t hrough. Don' t cut all t he way t o t he end of a line ont he f ir st cut . As each shape loosens up, gent ly push it out of t he pumpkin wit h a f inger or adull pencil point (a good j ob f or small kids). Larger shapes, such as gap-t oot hed grins, mayhave t o be removed in pieces.Tip: I f you cut somet hing you didn' t int end t o, per f or m an ad hoc pumpkin sur ger y: St ick at oot hpick t hrough t he f lesh side of t he piece and f it it back int o place.

    St ep 7: You can cr eat e dramat ic ef f ect s by let t ing candlelight t hrough t he pumpkin invar ying int ensit y. For a shaded ef f ect , don' t cut all t he way t hrough t he pumpkin. I nstead,make a shallow, angled (or V-shaped) cut (1/ 8 t o 1/ 2 inch, depending on t he t hickness oft he pumpkin wall), t hen peel away t he out er f lesh wit h a knif e t ip, spoon or veget able

    peeler . You also can use deep, angled cut s t o remove larger pieces, so t hat t he lightr ef lect s of f t he walls of t he hole.

    St ep 8: Place a candle inside your pumpkin (vot ives are more stable t han t apers). Light t hecandle, put on t he lid and t urn out t he light s. I f t he candle doesn' t st ay lit , increase t he airsupply eit her by enlar ging some of t he f eat ures or by carving a vent on t he back of t he lid.Last ly, put your j ack-o' -lant ern in a place of honor (away f r om f lammables) and r emembert o blow out all candles bef ore you go t o sleep.

    2 o

    c FamilyFu

  • 7/31/2019 FamilyFun Com Halloween Activities

    41/44

    Halloween: Pira te Pumpkin Ca rving Tem plate Page 1

    FamilyFun

    www.familyfun.com

  • 7/31/2019 FamilyFun Com Halloween Activities

    42/44

    Halloween: Pumpkin Carving Instructions Page 2

    FamilyFun

    www.familyfun.com

    Step 1: To make a lid, draw a circle or a hexagon at least 5 inches in diameter around the pumpkin's

    stem. Cut out the lid at an angle (so that the outside edge is larger than the inside) to keep it from

    slipping inside. For a carving tool, we recommend a pumpkin saw. Those using knives should carve

    gently and steadily. (Tip: Don't slide the knife all the way out of the pumpkin.)

    Step 2: When the lid is free, scrape it clean of seeds and pulp with a large metal spoon or an ice-

    cream scoop. Instead of removing the top, you may choose to remove a section from the bottom or

    side of the pumpkin. (This works well for an unstable or small pumpkin, or for certain designs.)

    Step 3: Scrape until you've had enough or until the wall is 1 to 1 1/2 inches thick (stop before you

    compromise the strength of the walls).

    Step 4: At the base, flatten a spot for the candle (again, don't make it too thin, or the bottom will rot).

    Step 5: There are two ways to transfer your design onto the pumpkin. One is to copy it freehand

    onto a clean, dry pumpkin with a water-based marker (mistakes can be easily corrected with a papertowel). The other is to tape your pattern or template to the pumpkin, then score the design into the

    skin by poking holes through the pattern with a nail or plastic poking tool (available in some

    pumpkin-carving kits).

    Step 6: The black portion of the image is the part of the pumpkin that youll be cutting out and

    removing. Carve by starting at the center of your design and working outward (this avoids putting

    pressure on areas already carved). Begin with the innermost and smallest features -- eyes before

    eyebrows, for instance -- and try to carve the inside lines of each feature before the outside lines. Be

    gentle: If you're using a knife, run it over each line a few times, rather than pushing all the way

    through. Don't cut all the way to the end of a line on the first cut. As each shape loosens up, gently

    push it out of the pumpkin with a finger or a dull pencil point (a good job for small kids). Larger

    shapes, such as gap-toothed grins, may have to be removed in pieces.

    Tip: If you cut something you didn't intend to, perform an ad hoc pumpkin surgery: Stick a toothpick

    through the flesh side of the piece and fit it back into place.

    Step 7: You can create dramatic effects by letting candlelight through the pumpkin in varying inten-

    sity. For a shaded effect, don't cut all the way through the pumpkin. Instead, make a shallow, angled

    (or V-shaped) cut (1/8 to 1/2 inch, depending on the thickness of the pumpkin wall), then peel away

    the outer flesh with a knife tip, spoon or vegetable peeler. You also can use deep, angled cuts to

    remove larger pieces, so that the light reflects off the walls of the hole.

    Step 8: Place a candle inside your pumpkin (votives are more stable than tapers). Light the candle,

    put on the lid and turn out the lights. If the candle doesn't stay lit, increase the air supply either by

    enlarging some of the features or by carving a vent on the back of the lid.

    Lastly, put your jack-o'-lantern in a place of honor (away from flammables) and remember to blow out

    all candles before you go to sleep.

  • 7/31/2019 FamilyFun Com Halloween Activities

    43/44

    Halloween: Tiki Pumpkin Ca rving Template Page 1

    FamilyFun

    www.familyfun.com

  • 7/31/2019 FamilyFun Com Halloween Activities

    44/44

    Halloween: Pumpkin Carving Instructions Page 2

    Step 1: To make a lid, draw a circle or a hexagon at least 5 inches in diameter around the pumpkin's

    stem. Cut out the lid at an angle (so that the outside edge is larger than the inside) to keep it from

    slipping inside. For a carving tool, we recommend a pumpkin saw. Those using knives should carve

    gently and steadily. (Tip: Don't slide the knife all the way out of the pumpkin.)

    Step 2: When the lid is free, scrape it clean of seeds and pulp with a large metal spoon or an ice-

    cream scoop. Instead of removing the top, you may choose to remove a section from the bottom or

    side of the pumpkin. (This works well for an unstable or small pumpkin, or for certain designs.)

    Step 3: Scrape until you've had enough or until the wall is 1 to 1 1/2 inches thick (stop before you

    compromise the strength of the walls).

    Step 4: At the base, flatten a spot for the candle (again, don't make it too thin, or the bottom will rot).

    Step 5: There are two ways to transfer your design onto the pumpkin. One is to copy it freehand

    onto a clean, dry pumpkin with a water-based marker (mistakes can be easily corrected with a papertowel). The other is to tape your pattern or template to the pumpkin, then score the design into the

    skin by poking holes through the pattern with a nail or plastic poking tool (available in some

    pumpkin-carving kits).

    Step 6: The black portion of the image is the part of the pumpkin that youll be cutting out and

    removing. Carve by starting at the center of your design and working outward (this avoids putting

    pressure on areas already carved). Begin with the innermost and smallest features -- eyes before

    eyebrows, for instance -- and try to carve the inside lines of each feature before the outside lines. Be

    gentle: If you're using a knife, run it over each line a few times, rather than pushing all the way

    through. Don't cut all the way to the end of a line on the first cut. As each shape loosens up, gently

    push it out of the pumpkin with a finger or a dull pencil point (a good job for small kids). Larger

    shapes, such as gap-toothed grins, may have to be removed in pieces.

    Tip: If you cut something you didn't intend to, perform an ad hoc pumpkin surgery: Stick a toothpick

    through the flesh side of the piece and fit it back into place.

    Step 7: You can create dramatic effects by letting candlelight through the pumpkin in varying inten-

    sity. For a shaded effect, don't cut all the way through the pumpkin. Instead, make a shallow, angled

    (or V-shaped) cut (1/8 to 1/2 inch, depending on the thickness of the pumpkin wall), then peel away

    the outer flesh with a knife tip, spoon or vegetable peeler. You also can use deep, angled cuts to

    remove larger pieces, so that the light reflects off the walls of the hole.

    Step 8: Place a candle inside your pumpkin (votives are more stable than tapers). Light the candle,

    put on the lid and turn out the lights. If the candle doesn't stay lit, increase the air supply either by

    enlarging some of the features or by carving a vent on the back of the lid.