Fabric paint in Singapore: 10 tips for amazing fabric

painting

For a small outlay on a few colors and asuitable brush, fabric painting opens upendless opportunities for transformingyour wardrobe and your home. Itenables you to create one-of-a-kindpieces of wearable art (t-shirts are themost common) or to design somespecial cushion covers, curtains, or awall hanging.

There are several high quality fabricpaints in Singapore for T-shirt colorgone repairing as well as painting thatone can use.As there are many enthusiasts whocherish using fabric paint in Singapore,here are some tips that can dramaticallyimprove your fabric painting experience.

Tip 1.

Will Anything Less Than 100% Cotton Do?Purists say the best fabric for painting onis 100% cotton with a tight weave (an off-white or cream fabric will dull the paintslightly). But good results can be obtainedwith rayons and silks too. The best is to trya sample square to check the results.

Tip 2. Tight is Bright

If a fabric is loosely woven, paint tends toseep through the threads before it’s dry.This tends to reduce the intensity of thecolors. A finely woven fabric is also easierto paint detail on than a loosely wovenone.

Tip 3. To Prewash or Not to Prewash?

The reason for prewashing fabric beforepainting on it is to remove any sizingadded during manufacture which mayprevent the paint from adhering to thesurface. It also gives it a chance toshrink, if it’s going to.

To test whether a piece of fabric really needsprewashing, drop a little bit of water on it. If itbeads up on the surface, it needs washing. If itsinks in, so should paint.Looking for high-quality fabric paint inSingapore on unbelievably low cost?

Tip 4. Skip the Softener

If you do wash a fabric, don’t add fabricsoftener! You’re trying to get rid ofchemicals, not add new ones.

Tip 5. Get Rid of Wrinkles

Take the time to iron the fabric well. Wrinkles can create havoc on a design.

Tip 6. The Heat is on

The easiest way to set fabric paints is to iron itfor a few minutes (check the manufacturer’sinstructions). If you iron on the wrong side ofthe fabric, the paint will still set fine and youdon’t have to worry about it rubbing off ontothe iron or the colors bleeding into each other.Alternatively, use a press cloth.

Allow the paint to dry thoroughly beforeironing, at least 24 hours. If you have a largeproject, you may want to try your tumbledryer to tumble a sample piece on high forhalf an hour, and then wash it to see if yourdryer was warm enough.Buy best brands of fabric paints in Singaporeon unbelievably low cost.

Tip 7. Go With the Flow

Wetting the fabric with clean water beforepainting it encourages colors to flow intoeach other, like in a watercolor. But don’tadd too much water, as it’ll dilute the colors;the fabric should be damp, not soaking.

Tip 8. Tread Softly

Stamping and stenciling on fabric work best ifyou’re working on a lightly padded surface, anold towel works well. Or if you don’t want tosacrifice a towel, cover a sheet of thick cardwith waxed paper (so it can be wiped clean).

Tip 9. Bleached-Out

Colors Bleach can be used to remove(discharge) the dye in a fabric, withunexpected and unpredictable results (do atest square!). Use a cheap brush to applybleach, as it’ll quickly ruin it, and weargloves so you don’t get bleach on your skin.Obviously it works best with dark colors. Tostop the action of the bleach, wash thefabric.

Tip 10. One-Sided Designs

Remember when painting a t-shirt to insertsomething like a few sheets of newspaper, a bitof card or plastic inside the shirt so the paintdoesn’t seep through onto the back of the shirt.

Note: in order to apply each of the above tips,quality of fabric paint matters the most. Get alow quality fabric paint and you will end upruining the fabric that often several times moreexpensive than the fabric paint itself.

More information visit this link:

http://lukirmart.com/fabric-paint-singapore-10-tips-amazing-fabric-painting/