Path to My True North 

  

 

Fabric Line: “True North”  

by  

Kate and Birdie for Moda 

Exclusively for TrendTex 

                Confident beginner 

 

PAGE 1 

Path to My True North Finished size: 36½” x 54½”

Finished Block Size: 9” Confident Beginner

Read all instructions prior to starting. Wash all fabrics and spray with “Best Press” fabric stabilizer prior to cutting. All seams are ¼” unless stated otherwise. WOF – width of fabric Fabric Requirements 513185-13 Cream Dot 513184-15 Grey Maple Leaves 513182-11- Red 513185-15 – Grey dot .50m .50m .80m .50m

 

 

 

 

 

 

 

 

 

Cutting Instructions: Cream Dot Cut (3) 2¾” x WOF Subcut into the following: (24) 2¾” squares (24) 2¾” x 5” rectangles Red Cut (4) 2¾” x WOF Subcut into the following: (24) 2¾” squares (24) 2¾” x 5” rectangles (24) 2¾” x 7¼” strips Grey Maple Leaf Cut (3) 2¾” x WOF Subcut into the following: (12) 2¾” x 7¼” strips

(12) 2¾” x 9½” strips Grey Dot Cut (3) 2¾” x WOF Subcut into the following: (12) 2¾” x 7¼” strips (12) 2¾” x 9½” strips

Block 1 Block 2  

PAGE 2 

Step 1 – Blocks Segment 1

1. Sew together the red 2¾” squares to the Cream 2¾” squares. Set the seam and press toward the cream fabric to create Segment 1 (Make 24)

Segment 2

2. Place the 2¾” x 5” cream rectangle on top of the Segment 1, sew an

accurate 1/4” seam on the left side. Repeat for the remaining 23 segments to create segment 2 (total 24) set the seams and press toward the cream.

Segment 3

3. Place the 2¾” x 5” red rectangle right sides together on Segment 2,

sew an accurate ¼” seam, set seam and press toward the red. Make 24 Segment 4

4. Place the 2¾” x 7¼” red strip right sides together, sew using an

Accurate ¼” seam, set the seam and press toward the 7¼” strip. Make 24.

Block 1 For block 1 you will be adding the 2¾” x 7¼” (Grey Maple Leaf fabric strip) right sides together as shown.

PAGE 3 

Sew on the 2½’ x 9½” (Grey Maple Leaf fabric strip) to the left side of the block as shown. Set the seam and press toward the light strip. Should measure 9½” square. Make a total of 12 blocks.

Block 2 Repeat 1 – 4 in block 1. To complete block 2 sew the 2½” x 7½” as shown. Sew on the 2½’ x 9½” (Grey dot fabric strip) to the left side of the block as shown. Set the seam and press toward the light strip. Should measure 9½” square. Make a total of 12 blocks. Quilt Layout Lay the blocks out as shown below. Sew the blocks together in rows. Press seams in row 1, 3 and 5 to the left. Press seams in rows 2, 4 and 6 to the right. Match the seams by nesting the seams and pin. Sew the rows together. Sandwich and quilt by sewing in the ditch (between the block seams, using a walking foot. Add the binding and label.

Enjoy!