fabric inspections
TRANSCRIPT
![Page 1: Fabric inspections](https://reader036.vdocuments.us/reader036/viewer/2022062407/55d7601ebb61eb92278b463c/html5/thumbnails/1.jpg)
![Page 2: Fabric inspections](https://reader036.vdocuments.us/reader036/viewer/2022062407/55d7601ebb61eb92278b463c/html5/thumbnails/2.jpg)
Fabric Inspections
D.S.C. JayasingheB.Sc. Eng ( Moratuwa )
![Page 3: Fabric inspections](https://reader036.vdocuments.us/reader036/viewer/2022062407/55d7601ebb61eb92278b463c/html5/thumbnails/3.jpg)
1. 100% Shade Grouping2. Color Confirmation3. 10% Fabric Inspection4. GSM Testing5. Shrinkages - Testing
Inspections & Testing'sDone at Fabric Inspections
![Page 4: Fabric inspections](https://reader036.vdocuments.us/reader036/viewer/2022062407/55d7601ebb61eb92278b463c/html5/thumbnails/4.jpg)
1. Swatches of fabric is cut away from each roll at
the unloading stage.2. Each Piece is given the roll number of it’s origin.3. Cut away pieces from these swatches are shade
grouped under the standard lighting conditions of the relative Buyer.
4. If the fabric is for washed garments , then the shade grouping is done after washing.
5. Grouped Shades are inserted in to the computer software for the information of cutting department.
100% Shade Grouping
![Page 5: Fabric inspections](https://reader036.vdocuments.us/reader036/viewer/2022062407/55d7601ebb61eb92278b463c/html5/thumbnails/5.jpg)
Swatches of fabric is cut away from each roll at the unloading stage.
100% Shade Grouping
![Page 6: Fabric inspections](https://reader036.vdocuments.us/reader036/viewer/2022062407/55d7601ebb61eb92278b463c/html5/thumbnails/6.jpg)
Roll number is written down on the piece
100% Shade Grouping
![Page 7: Fabric inspections](https://reader036.vdocuments.us/reader036/viewer/2022062407/55d7601ebb61eb92278b463c/html5/thumbnails/7.jpg)
These pieces are shade grouped under the standard lighting conditions of the certain Buyer. For washed garments, this is done after washing the piece.
100% Shade Grouping
![Page 8: Fabric inspections](https://reader036.vdocuments.us/reader036/viewer/2022062407/55d7601ebb61eb92278b463c/html5/thumbnails/8.jpg)
1. Solid Color Fabrics should be folded along the
width of the fabric.2. Stripes Should be folded across the stripes
when shade grouping.3. Small prints should be grouped based on the
size of the print as well.4. Stripes should be grouped considering the
repeat width also.5. While achieving all the above, work towards
achieving the minimum shades possible.
Shade Grouping Tips
![Page 9: Fabric inspections](https://reader036.vdocuments.us/reader036/viewer/2022062407/55d7601ebb61eb92278b463c/html5/thumbnails/9.jpg)
Shade Grouping Tips
A roll with a Different
Repeat Width Should be put
in to a Different Shade
![Page 10: Fabric inspections](https://reader036.vdocuments.us/reader036/viewer/2022062407/55d7601ebb61eb92278b463c/html5/thumbnails/10.jpg)
Shade Grouping Tips
A roll with a Different Size Prints Should be put in to a
different Shade
![Page 11: Fabric inspections](https://reader036.vdocuments.us/reader036/viewer/2022062407/55d7601ebb61eb92278b463c/html5/thumbnails/11.jpg)
Shade Groups are Finally Entered in to a System for the information of cutting
100% Shade Grouping
![Page 12: Fabric inspections](https://reader036.vdocuments.us/reader036/viewer/2022062407/55d7601ebb61eb92278b463c/html5/thumbnails/12.jpg)
The color of The bulk is checked Against an approved bulk Hanger.
** Matching of rolls in aBulk Shade should be very higher Than the matching of bulk Hanger With the bulk shades.
Color Confirmation
![Page 13: Fabric inspections](https://reader036.vdocuments.us/reader036/viewer/2022062407/55d7601ebb61eb92278b463c/html5/thumbnails/13.jpg)
1. 3 Pieces of Fabric is cut away diagonally from
each roll of 10% inspection.2. 3 Circles ( each = 1/100 of a square meter) is cut
away using the circular cutter from these pieces and measure the weight.
3. The weight of all 3 pieces is totaled and divided by 3 to get the median value.
4. A piece closer to the median value is affixed in the GSM report and mention the GSM.
GSM Testing
![Page 14: Fabric inspections](https://reader036.vdocuments.us/reader036/viewer/2022062407/55d7601ebb61eb92278b463c/html5/thumbnails/14.jpg)
3 Pieces of Fabric is cut away diagonally from each roll of 10% inspection.
GSM Testing
![Page 15: Fabric inspections](https://reader036.vdocuments.us/reader036/viewer/2022062407/55d7601ebb61eb92278b463c/html5/thumbnails/15.jpg)
3 Pieces ( 1/100 of a square meter) is segregated using the circular cutter from
these pieces and measure the weight
GSM Testing
![Page 16: Fabric inspections](https://reader036.vdocuments.us/reader036/viewer/2022062407/55d7601ebb61eb92278b463c/html5/thumbnails/16.jpg)
Measuring the weight of a pieces.
GSM Testing
Calibrated Scale is used to measure the weight
of the piece.
3 Pieces together or individually measured by this method. Divide the total value by 3 to get the median value.
When we multiply this value by 100, we
receive the actual GSM of the fabric.
![Page 17: Fabric inspections](https://reader036.vdocuments.us/reader036/viewer/2022062407/55d7601ebb61eb92278b463c/html5/thumbnails/17.jpg)
GSM Report is Prepared affixing one pieceCloser to median value ofThe GSM of the fabric,
+/- 5% tolerance Is acceptable.
GSM Report
![Page 18: Fabric inspections](https://reader036.vdocuments.us/reader036/viewer/2022062407/55d7601ebb61eb92278b463c/html5/thumbnails/18.jpg)
1. 10% of rolls are taken from every batch at the
unloading stage.2. Rolls are inspected according to standard 4
point inspection method.3. Based on the average point count
0-16 Points – Fabric Pass 16-28 Points – Fabric in the High Fault Rate
Range 28 + -- Fabric is Rejecting
10% Fabric Inspection
![Page 19: Fabric inspections](https://reader036.vdocuments.us/reader036/viewer/2022062407/55d7601ebb61eb92278b463c/html5/thumbnails/19.jpg)
Rolls being inspected
![Page 20: Fabric inspections](https://reader036.vdocuments.us/reader036/viewer/2022062407/55d7601ebb61eb92278b463c/html5/thumbnails/20.jpg)
We use standard 4 point inspection method for grading and
inspecting fabric. Based on this method the points to defects are given as follows. Maximum points can be given to a linear
yard is 4.
Inspection Method
Defect Size / Type Points Given
Hole 4
Other Defects
0”-3” 1
3”-6” 2
6”-9” 3
9” + 4
![Page 21: Fabric inspections](https://reader036.vdocuments.us/reader036/viewer/2022062407/55d7601ebb61eb92278b463c/html5/thumbnails/21.jpg)
There are several types of fabric defects. Few of them can be
mentioned as follows.1. Fly Yarns2. Holes3. Slubs4. Stains5. Printing Mistakes6. Miss Yarns ( Composites )7. Missing Wales8. Dye Patches9. Crease Marks10. Thick Yarns11. Thin Yarns12. Dirt Marks
Defects on Knitted Fabrics
![Page 22: Fabric inspections](https://reader036.vdocuments.us/reader036/viewer/2022062407/55d7601ebb61eb92278b463c/html5/thumbnails/22.jpg)
This is due to Different color yarn contaminate with the fabric. Points are given based on the
size , 90% of fly yarns can be removed by using sharp tweezers , Fly Yarns can be easily removed on a 100% cotton fabric than in a 95/5 Cotton /
Spandex Mix. Higher the yarn thickness easier the removing of
fly yarns.
Fly Yarn
![Page 23: Fabric inspections](https://reader036.vdocuments.us/reader036/viewer/2022062407/55d7601ebb61eb92278b463c/html5/thumbnails/23.jpg)
Fly Yarn ( Image )
![Page 24: Fabric inspections](https://reader036.vdocuments.us/reader036/viewer/2022062407/55d7601ebb61eb92278b463c/html5/thumbnails/24.jpg)
Holes are due to various issues , Mostly due to breaking of knitting needles. Damages due to sharp instruments is also a reason for holes , Holes are always given 4 points neglecting it’s size, Holes are hard to repair and consume more technical skills and sharp instruments.
Hole
![Page 25: Fabric inspections](https://reader036.vdocuments.us/reader036/viewer/2022062407/55d7601ebb61eb92278b463c/html5/thumbnails/25.jpg)
Hole ( Image )
![Page 26: Fabric inspections](https://reader036.vdocuments.us/reader036/viewer/2022062407/55d7601ebb61eb92278b463c/html5/thumbnails/26.jpg)
Slubs are due to entangling of yarns and slubs precent in the raw yarns. Points to a slub is given based on it’s size. Repairing of slub need excellent patience and skill.
If a slub is not repaired correctly it would end up as a hole.
Slubs
![Page 27: Fabric inspections](https://reader036.vdocuments.us/reader036/viewer/2022062407/55d7601ebb61eb92278b463c/html5/thumbnails/27.jpg)
Slub ( Image )
![Page 28: Fabric inspections](https://reader036.vdocuments.us/reader036/viewer/2022062407/55d7601ebb61eb92278b463c/html5/thumbnails/28.jpg)
Stains ( Image)
![Page 29: Fabric inspections](https://reader036.vdocuments.us/reader036/viewer/2022062407/55d7601ebb61eb92278b463c/html5/thumbnails/29.jpg)
Stains occur due to chemicals and natural material as well. There are basically 3 types of stains.
1. Water Born Stain2. Oil Born Stain3. Heat Set Stain
Approximately 99% of all stains are removable on white fabrics while it is quite hard to remove on a color fabric due to the objective of saving the color.
Stains
![Page 30: Fabric inspections](https://reader036.vdocuments.us/reader036/viewer/2022062407/55d7601ebb61eb92278b463c/html5/thumbnails/30.jpg)
Stains have 2 basic combination which affect the fabric
1. Bonding with the fabric2. Color
For oil born stain you have to use a hydrocarbon ( Thinner ) to remove the stain from bonding , For a water born stain you can use water or an alcohol ( Surgical Spirit ). To remove the color of a stain you have to use a tough oxidizer ( Liquid Chlorine ). When you are testing trial an error method for a stain you have to begin with water , hot water and soap before all others.
Stains ( How to Remove )
![Page 31: Fabric inspections](https://reader036.vdocuments.us/reader036/viewer/2022062407/55d7601ebb61eb92278b463c/html5/thumbnails/31.jpg)
Printing mistakes happen due to various reasons.
1. Damage of the Screen2. Screen Setting off3. Squeegee malfunctioning4. Tension of the fabric is wrong or varying
Most of the Printing mistakes become critical and impossible to repair, some small damages are
correctable yet you may need buyers approval for uncured painting.
Printing Mistake
![Page 32: Fabric inspections](https://reader036.vdocuments.us/reader036/viewer/2022062407/55d7601ebb61eb92278b463c/html5/thumbnails/32.jpg)
Printing Mistakes ( Image )
![Page 33: Fabric inspections](https://reader036.vdocuments.us/reader036/viewer/2022062407/55d7601ebb61eb92278b463c/html5/thumbnails/33.jpg)
Usually a miss yarn in a knitted fabric should be
an opening of the fabric , Yet in a composite fabric( ex. 95/5 Cotton / Spandex ) a miss yarn can be found with the availability of the body
yarn or the elastic yarn.
Miss Yarns
![Page 34: Fabric inspections](https://reader036.vdocuments.us/reader036/viewer/2022062407/55d7601ebb61eb92278b463c/html5/thumbnails/34.jpg)
Miss Yarn ( Image )
![Page 35: Fabric inspections](https://reader036.vdocuments.us/reader036/viewer/2022062407/55d7601ebb61eb92278b463c/html5/thumbnails/35.jpg)
Dye patches occur due to pouring of chemicals
carelessly, due to having less homogeneous dye baths and entanglements of the fabric in the dyeing process. Points are given based on the
size of the defect.Dye patches are hard to be corrected.
Dye Patches
![Page 36: Fabric inspections](https://reader036.vdocuments.us/reader036/viewer/2022062407/55d7601ebb61eb92278b463c/html5/thumbnails/36.jpg)
Dye Patches ( Image )
![Page 37: Fabric inspections](https://reader036.vdocuments.us/reader036/viewer/2022062407/55d7601ebb61eb92278b463c/html5/thumbnails/37.jpg)
A continuous gap between adjacent wales is called as a missing wale. Missing wales are due to continuing of knitting at the breakage of a needle or malfunctioning of a needle lifting
mechanism.
Missing Wale
![Page 38: Fabric inspections](https://reader036.vdocuments.us/reader036/viewer/2022062407/55d7601ebb61eb92278b463c/html5/thumbnails/38.jpg)
Missing Wale ( Images )
![Page 39: Fabric inspections](https://reader036.vdocuments.us/reader036/viewer/2022062407/55d7601ebb61eb92278b463c/html5/thumbnails/39.jpg)
Crease Marks Happen due to the crushing of fabric at the finishing stage , rolling stage and transport stage and stocking stage as well.
Crease marks on knitted fabrics is not a serious defect while it become very serious on woven fabrics.
Crease Marks
![Page 40: Fabric inspections](https://reader036.vdocuments.us/reader036/viewer/2022062407/55d7601ebb61eb92278b463c/html5/thumbnails/40.jpg)
Crease Marks ( Image)
![Page 41: Fabric inspections](https://reader036.vdocuments.us/reader036/viewer/2022062407/55d7601ebb61eb92278b463c/html5/thumbnails/41.jpg)
Thick yarns occur due to feeding of higher thickness of yarn to the knitting machine or lower tension of a certain yarn.
Thick yarns cannot be correct at a sewing facility.
Thick Yarns
![Page 42: Fabric inspections](https://reader036.vdocuments.us/reader036/viewer/2022062407/55d7601ebb61eb92278b463c/html5/thumbnails/42.jpg)
Thick Yarn ( Image )
![Page 43: Fabric inspections](https://reader036.vdocuments.us/reader036/viewer/2022062407/55d7601ebb61eb92278b463c/html5/thumbnails/43.jpg)
Thin yarns occur due to feeding of lower thickness yarn to the knitting machine or higher tension of a certain yarn.
Thin yarns cannot be correct at a sewing facility.
Thin Yarn
![Page 44: Fabric inspections](https://reader036.vdocuments.us/reader036/viewer/2022062407/55d7601ebb61eb92278b463c/html5/thumbnails/44.jpg)
Thin Yarn ( Image)
![Page 45: Fabric inspections](https://reader036.vdocuments.us/reader036/viewer/2022062407/55d7601ebb61eb92278b463c/html5/thumbnails/45.jpg)
Long looped courses are specially can be seen at 95 / 5 Elastane blends. This happens due to the breakage of elastic yarn at the knitting stage,
when the elastic yarn is broken the loop length of a certain course increases and the fabric
become more transparent along that course.
Long Looped Courses
![Page 46: Fabric inspections](https://reader036.vdocuments.us/reader036/viewer/2022062407/55d7601ebb61eb92278b463c/html5/thumbnails/46.jpg)
The long loops seen with the
assistance of a backlight
Long Loops ( Images )
![Page 47: Fabric inspections](https://reader036.vdocuments.us/reader036/viewer/2022062407/55d7601ebb61eb92278b463c/html5/thumbnails/47.jpg)
Dirt marks occur mainly at rolling stages, packing and transporting stages ,
Most dirt marks are easily washable yet should and can be avoided.
Dirt Marks
![Page 48: Fabric inspections](https://reader036.vdocuments.us/reader036/viewer/2022062407/55d7601ebb61eb92278b463c/html5/thumbnails/48.jpg)
Inspection report is prepared by inserting length, width, points, correctly.
The point count is expressed as Average Points Per 100 Square Yards.
Next slide will describe the complete method of calculating Average point count.
Preparing Inspection Report
![Page 49: Fabric inspections](https://reader036.vdocuments.us/reader036/viewer/2022062407/55d7601ebb61eb92278b463c/html5/thumbnails/49.jpg)
Formula to Calculate Average Point Count
![Page 50: Fabric inspections](https://reader036.vdocuments.us/reader036/viewer/2022062407/55d7601ebb61eb92278b463c/html5/thumbnails/50.jpg)
4 Point Inspection Report
![Page 51: Fabric inspections](https://reader036.vdocuments.us/reader036/viewer/2022062407/55d7601ebb61eb92278b463c/html5/thumbnails/51.jpg)
Points 0 to 16 - Fabric Pass
Proceed Normally
Points 16 to 28 – Fabric is in High Fault Rate range
Need to do CPI prior issuing to line
Points 28 + - Fabric is in Rejecting RangeNeed to inform to supplier to arrange CPI
teams and receive the replacement yardages
Fabric Status Based on Average Point Count
![Page 52: Fabric inspections](https://reader036.vdocuments.us/reader036/viewer/2022062407/55d7601ebb61eb92278b463c/html5/thumbnails/52.jpg)
3 pieces of fabric is cut away from the start , middle and end of the rolls at the inspection stage.
These Pieces are joined together as we can monitor the color shading both length wise and width wise.
Width Wise , Length Wise Color Shading Inspection
![Page 53: Fabric inspections](https://reader036.vdocuments.us/reader036/viewer/2022062407/55d7601ebb61eb92278b463c/html5/thumbnails/53.jpg)
Shading Blanket
![Page 54: Fabric inspections](https://reader036.vdocuments.us/reader036/viewer/2022062407/55d7601ebb61eb92278b463c/html5/thumbnails/54.jpg)
If Length wise color shading found
Inform the cutting to do 100 % numbering
If Width wise color shading found Inform to cutting and CAD room to draw and cut in grouped
markers and receive increasing YY from mill
Both length and width wise color shading found Inform the cutting to proceed with group markers and 100%
numbering.
For washed Garments , shading panel is inspected after the washing process.
Shading Panel Inspection
![Page 55: Fabric inspections](https://reader036.vdocuments.us/reader036/viewer/2022062407/55d7601ebb61eb92278b463c/html5/thumbnails/55.jpg)
Skewness
![Page 56: Fabric inspections](https://reader036.vdocuments.us/reader036/viewer/2022062407/55d7601ebb61eb92278b463c/html5/thumbnails/56.jpg)
Skewness is expressed as a percentage.
Measuring Skewness
x
y
Skewness = x X 100%y
![Page 57: Fabric inspections](https://reader036.vdocuments.us/reader036/viewer/2022062407/55d7601ebb61eb92278b463c/html5/thumbnails/57.jpg)
Leg Twisting of garments. Side seam twisting of garments. Various shape measurement alterations in
complex garments after washing.
Effects of Skew Movement
![Page 58: Fabric inspections](https://reader036.vdocuments.us/reader036/viewer/2022062407/55d7601ebb61eb92278b463c/html5/thumbnails/58.jpg)
Residual Shrinkage is used to measure the residual stress on a fabric remaining after various processes.
Residual shrinkage is measured at the time periods of 6 hours , 18 hours , 24 hours and 48 hours.
By Monitoring 0 difference between time intervals , we can decide the relaxing time of fabric.
Residual Shrinkages
![Page 59: Fabric inspections](https://reader036.vdocuments.us/reader036/viewer/2022062407/55d7601ebb61eb92278b463c/html5/thumbnails/59.jpg)
Marking Shrinkage Panels
![Page 60: Fabric inspections](https://reader036.vdocuments.us/reader036/viewer/2022062407/55d7601ebb61eb92278b463c/html5/thumbnails/60.jpg)
Measuring Shrinkages at the right intervals
![Page 61: Fabric inspections](https://reader036.vdocuments.us/reader036/viewer/2022062407/55d7601ebb61eb92278b463c/html5/thumbnails/61.jpg)
Residual Shrinkage Report
![Page 62: Fabric inspections](https://reader036.vdocuments.us/reader036/viewer/2022062407/55d7601ebb61eb92278b463c/html5/thumbnails/62.jpg)
Wash Shrinkages are done mostly for 100% rolls and is done as same as residual shrinkages, the only difference is , the shrinkages are taken after washing the pieces in the standard condition.
Not like residual shrinkages, wash shrinkages are inserted in to the computer system for the information of cutting department, patterns are adjusted according to it.
Wash Shrinkages
![Page 63: Fabric inspections](https://reader036.vdocuments.us/reader036/viewer/2022062407/55d7601ebb61eb92278b463c/html5/thumbnails/63.jpg)
All below tests should pass to proceed a fabric for cutting,1. 10 % fabric inspection2. Color matching3. GSM test4. ShrinkagesAt the end of the process all passing rolls are shade vise inserted in to system for cutting.
Summary
![Page 64: Fabric inspections](https://reader036.vdocuments.us/reader036/viewer/2022062407/55d7601ebb61eb92278b463c/html5/thumbnails/64.jpg)
The End