fabric & garments fault with its remedies
DESCRIPTION
TRANSCRIPT
![Page 1: Fabric & Garments Fault with its remedies](https://reader034.vdocuments.us/reader034/viewer/2022042521/54c790c64a79596b318b45c8/html5/thumbnails/1.jpg)
FABRIC & GARMENTS FAULT WITH ITS REMEDIES
![Page 2: Fabric & Garments Fault with its remedies](https://reader034.vdocuments.us/reader034/viewer/2022042521/54c790c64a79596b318b45c8/html5/thumbnails/2.jpg)
Prepared By : Mazadul Hasan sheshirID: 201000040000813th Batch (session 2009-2013)Department : Wet Processing Technology Email: [email protected] : www. Textilelab.blogspot.com (visit)
Southeast University Department Of Textile Engineering
I/A 251,252 Tejgaon Dhaka Bangladesh
Prepared By :
![Page 3: Fabric & Garments Fault with its remedies](https://reader034.vdocuments.us/reader034/viewer/2022042521/54c790c64a79596b318b45c8/html5/thumbnails/3.jpg)
Total Textile Process at a Glance
![Page 4: Fabric & Garments Fault with its remedies](https://reader034.vdocuments.us/reader034/viewer/2022042521/54c790c64a79596b318b45c8/html5/thumbnails/4.jpg)
Knitting Faults
Hole: Hole can be three types Hole, Pin hole, Star hole.• Causes:• Broken Needle.• Improper cleaning.• Yarn breakage at knot.• Very high yarn twist.• Picture: Hole
Remedies:• Properly M/C cleaning.• Dust removes by the air gun.• Needle broken check.
![Page 5: Fabric & Garments Fault with its remedies](https://reader034.vdocuments.us/reader034/viewer/2022042521/54c790c64a79596b318b45c8/html5/thumbnails/5.jpg)
Loop Out:
Causes:
Needle broken.
Picture:
Remedies:
Change the broken needle.
![Page 6: Fabric & Garments Fault with its remedies](https://reader034.vdocuments.us/reader034/viewer/2022042521/54c790c64a79596b318b45c8/html5/thumbnails/6.jpg)
Loop:
Causes:
• Missing feeder of the yarn.• Fly or dust contains.
Picture:
Loop
Remedies:• Properly yarn is passing to the feeder.• Remove dust or Fly from the Air gun.
![Page 7: Fabric & Garments Fault with its remedies](https://reader034.vdocuments.us/reader034/viewer/2022042521/54c790c64a79596b318b45c8/html5/thumbnails/7.jpg)
Lycra out:
CAUSES• Elasticity missing• Breaking of Lycra yarn• Too much tension on yarn• Improper working of feeder• Too high Lycra running in tension
Picture:
Lycra out Remedies:• Replace the Lycra yarn where the Lycra Missing.• Insure working of feeder.
![Page 8: Fabric & Garments Fault with its remedies](https://reader034.vdocuments.us/reader034/viewer/2022042521/54c790c64a79596b318b45c8/html5/thumbnails/8.jpg)
Setup:
• Uneven yarn.• Yarn breakage to thin places. Picture:
Setup
• Use smooth yarn.• Yarn repair to the thin place.
Cause
Remedies
![Page 9: Fabric & Garments Fault with its remedies](https://reader034.vdocuments.us/reader034/viewer/2022042521/54c790c64a79596b318b45c8/html5/thumbnails/9.jpg)
Fly Knitt:
Causes:• Fly contamination to produce Fly Knit Picture:
Remedies:• Fly is removing by the help of Sesser.
![Page 10: Fabric & Garments Fault with its remedies](https://reader034.vdocuments.us/reader034/viewer/2022042521/54c790c64a79596b318b45c8/html5/thumbnails/10.jpg)
Patta:
Causes:• Patta is creating by Machine parts fault. Picture:
Patta Remedies:• To repair the M/C parts.
Note: After Fabrications Patta can’t remove any process.
![Page 11: Fabric & Garments Fault with its remedies](https://reader034.vdocuments.us/reader034/viewer/2022042521/54c790c64a79596b318b45c8/html5/thumbnails/11.jpg)
Dyeing Faults
Causes:
Uneven pretreatment (uneven scouring & bleaching).• Improper color dosing.• Using dyes of high fixation property.• Uneven heat-setting in case of synthetic fibers.• Lack of control on dyeing m/c Remedies:
• By ensuring even pretreatment.• By ensuring even heat-setting in case of synthetic fibers.• Proper dosing of dyes and chemicals.• Proper controlling of dyeing m/c• MA SOAP Ne (.3 g/l) 900X30/ 2 time.
Uneven Dyeing:
![Page 12: Fabric & Garments Fault with its remedies](https://reader034.vdocuments.us/reader034/viewer/2022042521/54c790c64a79596b318b45c8/html5/thumbnails/12.jpg)
Batch to Batch Shade Variation:Causes:
• Fluctuation of Temperature.• Improper dosing time of dyes & chemicals.• Batch to batch weight variation of dyes and chemicals.• Dyes lot variation.• Improper reel speed, pump speed, liquor ratio.• Improper pretreatment.
Remedies: • Use standard dyes and chemicals.• Maintain the same liquor ratio.• Follow the standard pretreatment procedure.• Maintain the same dyeing cycle.• Identical dyeing procedure should be followed for the same depth of the Shade.
![Page 13: Fabric & Garments Fault with its remedies](https://reader034.vdocuments.us/reader034/viewer/2022042521/54c790c64a79596b318b45c8/html5/thumbnails/13.jpg)
Crease Mark: Causes:
Poor opening of the fabric rope• Shock cooling of synthetic material• If pump pressure & reel speed is not equal• Due to high speed m/c running
Remedies:
• Maintaining proper reel sped & pump speed.• Lower rate rising and cooling the temperature• Reducing the m/c load• Higher liquor ratio
![Page 14: Fabric & Garments Fault with its remedies](https://reader034.vdocuments.us/reader034/viewer/2022042521/54c790c64a79596b318b45c8/html5/thumbnails/14.jpg)
Finishing Faults:
• Squeezer Mark
• Dia mark
• Competing mark
• Dirty spot
• Finishing setup
• QC Setup
• Softener Spot
![Page 15: Fabric & Garments Fault with its remedies](https://reader034.vdocuments.us/reader034/viewer/2022042521/54c790c64a79596b318b45c8/html5/thumbnails/15.jpg)
Squeezer Mark:
•Machine problem or folding.
Remedies:
•Folded the fabric after properly dryer.
Dirty spot:Causes:
Fabric is placed dirty place•Contamination of dust.
Remedies:
•E2R + Lad quest + KRCP – 900 x 60’
Causes:
![Page 16: Fabric & Garments Fault with its remedies](https://reader034.vdocuments.us/reader034/viewer/2022042521/54c790c64a79596b318b45c8/html5/thumbnails/16.jpg)
Cutting Faults
Causes:• Fabric line don’t match.• Cutting machine move un direction wise
Remedies:• Fabric line must be match.• Knife moves marking direction wise
Bias cut
![Page 17: Fabric & Garments Fault with its remedies](https://reader034.vdocuments.us/reader034/viewer/2022042521/54c790c64a79596b318b45c8/html5/thumbnails/17.jpg)
Unfused edge
• High temperature produced during cutting can fuse fabric edges by melting.
Remedies:• Use of anti-fusion (heat absorbent) paper.• Spraying silicon lubricants on the blade.• Less cutting speed.• Reducing the height of the lay.
Cause:
![Page 18: Fabric & Garments Fault with its remedies](https://reader034.vdocuments.us/reader034/viewer/2022042521/54c790c64a79596b318b45c8/html5/thumbnails/18.jpg)
Printing Faults
• Color spot• Color shade• Basic Shade• Color missing• Color Reject• Un shade color• Un complete print• miss Print
![Page 19: Fabric & Garments Fault with its remedies](https://reader034.vdocuments.us/reader034/viewer/2022042521/54c790c64a79596b318b45c8/html5/thumbnails/19.jpg)
Uncompleted print
• Printing screen block.• Printing paste short.
REMEDIES: • Clean the Printing Screen• Printing paste is available on the printing screen
CAUSE:
![Page 20: Fabric & Garments Fault with its remedies](https://reader034.vdocuments.us/reader034/viewer/2022042521/54c790c64a79596b318b45c8/html5/thumbnails/20.jpg)
Miss Print:
• Drying the printing paste• Less amount paste give the on the fabric.• Curing process is not properly use
Picture: Miss print
• Sufficient paste is required on to the fabric.• Curing process must be done
Causes:
Remedies:
![Page 21: Fabric & Garments Fault with its remedies](https://reader034.vdocuments.us/reader034/viewer/2022042521/54c790c64a79596b318b45c8/html5/thumbnails/21.jpg)
Causes:
• Needle broken • Bobbin thread out Remedies: • Broken Needle change• Bobbin change
Stitch drop:Embroidery Faults:
![Page 22: Fabric & Garments Fault with its remedies](https://reader034.vdocuments.us/reader034/viewer/2022042521/54c790c64a79596b318b45c8/html5/thumbnails/22.jpg)
weak stitch
Less thread tension.• Lying paper missing.
• Correct thread tension should be used.• Lying paper properly used.
Causes:
REMEDIES:
![Page 23: Fabric & Garments Fault with its remedies](https://reader034.vdocuments.us/reader034/viewer/2022042521/54c790c64a79596b318b45c8/html5/thumbnails/23.jpg)
Sewing Faults
Mainly there are three types of Sewing Faults 1) Defects due to problem of stitch formation.2) Defects due to fabric distortion.3) Seam puckering.
![Page 24: Fabric & Garments Fault with its remedies](https://reader034.vdocuments.us/reader034/viewer/2022042521/54c790c64a79596b318b45c8/html5/thumbnails/24.jpg)
problem of stitch formation
• Thread is tearing due to stitch formation.• Needle is broken due to stitch formation.
Remedies: • Bonding the tearing thread due to proper stitch formation.• Broken needle is changed.
CAUSES:
![Page 25: Fabric & Garments Fault with its remedies](https://reader034.vdocuments.us/reader034/viewer/2022042521/54c790c64a79596b318b45c8/html5/thumbnails/25.jpg)
Seam puckering
• Very high or low tension stitch cause seam puckering.• Very high twisted thread is used.
Remedies: • Normal tension thread is used due to stitch formation.
Causes:
![Page 26: Fabric & Garments Fault with its remedies](https://reader034.vdocuments.us/reader034/viewer/2022042521/54c790c64a79596b318b45c8/html5/thumbnails/26.jpg)
Name of garment defects/ Faults:
– Spirality– Broken Buttons– Broken stitching– Defective snaps– Different shades within the same garment– Dropped stitches– Exposed notches– Exposed raw edges– Fabric defects– Holes– Inoperative zipper– Loose sewing threads– Misaligned buttons & holes– Needle cuts– Open seams– Loose thread– Stain– Unfinished buttonhole– Zipper too short
![Page 27: Fabric & Garments Fault with its remedies](https://reader034.vdocuments.us/reader034/viewer/2022042521/54c790c64a79596b318b45c8/html5/thumbnails/27.jpg)
Spirality:
• Yarn twist too high.• Yarn quality is very poor.• Bad combination between yarn twist & machine rotation direction. Picture:
Spirality• Control of yarn twist (yarn twist should never be above 700 try/m).• Reduction of feeder number.• Appropriate finishing reduces fabric spirality.
Causes:
Remedies:
![Page 28: Fabric & Garments Fault with its remedies](https://reader034.vdocuments.us/reader034/viewer/2022042521/54c790c64a79596b318b45c8/html5/thumbnails/28.jpg)
Different shades within the same garment:
• Uneven to batch missing shade.• Different Batch mixing for same garment.
• One batch fabric shade is used for same garment in every part.
• Shade is marking each part due to fabric cutting.
Causes:
Remedies:
![Page 29: Fabric & Garments Fault with its remedies](https://reader034.vdocuments.us/reader034/viewer/2022042521/54c790c64a79596b318b45c8/html5/thumbnails/29.jpg)
Hole:
• Very stiff & dry yarn• Fluff• Improper cleaning Picture:
Remedies:• Use a fabric fault detector.• Air humidification• Use of yarn having lower hairiness.
Cause:
![Page 30: Fabric & Garments Fault with its remedies](https://reader034.vdocuments.us/reader034/viewer/2022042521/54c790c64a79596b318b45c8/html5/thumbnails/30.jpg)
Stain:
• INK, Food and drinks that are spilled on the garment stain. are one of the most common ways clothing becomes stained.
Picture:
Remedies: Stain• Shout Stain Solver is remove garment stain
Cause:
![Page 31: Fabric & Garments Fault with its remedies](https://reader034.vdocuments.us/reader034/viewer/2022042521/54c790c64a79596b318b45c8/html5/thumbnails/31.jpg)
Garments Finishing Faults:
• Shrinkage• Dirty sport• Iron spot• Oil line• Alter• Dye sport• Rejection• Unwanted marks on fabric • Decolorized patch on fabric • Pin holes • Sanforize Pucker• Pilling • Water Spots • Cuts or Nicks• Seam Tears • Soil • Loose Threads• Folding Defects
![Page 32: Fabric & Garments Fault with its remedies](https://reader034.vdocuments.us/reader034/viewer/2022042521/54c790c64a79596b318b45c8/html5/thumbnails/32.jpg)
Unwanted marks on fabric:Causes: Oily stains with dust adhered to surface which makes Unwanted marks on fabric
Picture:
Remedies:• Sun Shine water removes the unwanted mark on fabric.
![Page 33: Fabric & Garments Fault with its remedies](https://reader034.vdocuments.us/reader034/viewer/2022042521/54c790c64a79596b318b45c8/html5/thumbnails/33.jpg)
Pin holes:
Causes:
• Holes along selvage caused by pins holding fabric while it processes through tenter frame.
• Major defect if pin holes extend into body of fabric far enough to be visible in the finished product.
Picture: Remedies:• Before fabric spreading hole part is remove from the cutting
fabric.
![Page 34: Fabric & Garments Fault with its remedies](https://reader034.vdocuments.us/reader034/viewer/2022042521/54c790c64a79596b318b45c8/html5/thumbnails/34.jpg)
Seam Tears
• Frequently caused by the turning equipment used toreverse garments in finishing. Picture:
Seam tear
Remedies:• Seam Stitch is again where place Seam Tears.
Causes:
![Page 35: Fabric & Garments Fault with its remedies](https://reader034.vdocuments.us/reader034/viewer/2022042521/54c790c64a79596b318b45c8/html5/thumbnails/35.jpg)
Shrinkage:Causes:
• Short fibre yarn create shrinkage problem on to the fabric.• High twisted yarn/thread is the reason of shrinkage. Picture:
Shrinkage Remedies:• Steam iron is used.• Better quality yarn shrinkage problem reduce.
![Page 36: Fabric & Garments Fault with its remedies](https://reader034.vdocuments.us/reader034/viewer/2022042521/54c790c64a79596b318b45c8/html5/thumbnails/36.jpg)
Dirty sport:
• Dirt, Dust & other impurities is the cause the dirty sport. Picture:
Remedies:
• E2R + Ladiquest + KRCP – 900 x 60o
1 g/L 1 g/L 1 g/L
Causes:
![Page 37: Fabric & Garments Fault with its remedies](https://reader034.vdocuments.us/reader034/viewer/2022042521/54c790c64a79596b318b45c8/html5/thumbnails/37.jpg)
Iron spot
Causes:If the Iron surface is dirt then this iron used become iron spot problem.
Picture:
Remedies:Spot Lifter chemical remove Iron spot.
![Page 38: Fabric & Garments Fault with its remedies](https://reader034.vdocuments.us/reader034/viewer/2022042521/54c790c64a79596b318b45c8/html5/thumbnails/38.jpg)
Alter:Causes:• Stitch drop, Size defect.
Remedies:• Stitch open & new stitch is drop.• Actual size is measured to new body. Rejection:
Causes:• Garments Hole is the main reason of rejection.
Remedies:• There is no remedy in garments rejection this garments is totally reject.
![Page 39: Fabric & Garments Fault with its remedies](https://reader034.vdocuments.us/reader034/viewer/2022042521/54c790c64a79596b318b45c8/html5/thumbnails/39.jpg)
The fabric & Garments fault is the common reason. This problem is must be occurred during fabric & garments processing. Then we try to remedies this problem in various ways. But initially if we more carefully this faults, and some step is taken to prevent this faults then faults percentage is reduce.
Recommendation:
![Page 40: Fabric & Garments Fault with its remedies](https://reader034.vdocuments.us/reader034/viewer/2022042521/54c790c64a79596b318b45c8/html5/thumbnails/40.jpg)
Conclusion:
We have done project work is very carefully with successfully. Our Industry Every person is very helpful & Positive attitude. We found the Fabric & Garments fault with its remedies in every division. This project work is very essential in our job life.
![Page 41: Fabric & Garments Fault with its remedies](https://reader034.vdocuments.us/reader034/viewer/2022042521/54c790c64a79596b318b45c8/html5/thumbnails/41.jpg)
![Page 42: Fabric & Garments Fault with its remedies](https://reader034.vdocuments.us/reader034/viewer/2022042521/54c790c64a79596b318b45c8/html5/thumbnails/42.jpg)
![Page 43: Fabric & Garments Fault with its remedies](https://reader034.vdocuments.us/reader034/viewer/2022042521/54c790c64a79596b318b45c8/html5/thumbnails/43.jpg)
1. Yarn Manufacturing TechnologyLink : http://www.facebook.com/pages/Yarn-Manufacturing-Technology/485014954866808
2. Fabric Manufacturing TechnologyLink : http://www.facebook.com/pages/Fabric-Manufacturing-Technology/459520217425605
3. Garments Manufacturing TechnologyLink : http://www.facebook.com/pages/Garments-Manufacturing-Technology/472364799463126
3. Wet processing TechnologyLink : http://www.facebook.com/pages/Wet-Processing-Technology-Dyeing-/468645219825404
4. Fashion-Design-and-TechnologyLink : http://www.facebook.com/pages/Fashion-Design-and-Technology/587655294583875?ref=ts&fref=ts
My Facebook Textile related Pages
http://www.textilelab.blogspot.com (Visit )