f400/500/650 - hillary machinery...02f500plus basic features high speed & productivity vertical...

F400/500/650HYUNDAI WIA Vertical Machining Center

For more information, contact Hillary Machinery at (877)902-3751 or https://www.hillaryinc.com

For more information, contact Hillary Machinery at (877)902-3751 or www.hillaryinc.com



The Vertical Machining Center F400/500/650 Series, designed by Hyundai WIA with years of expertise and the latest technology, maximizes productivity while maintaining rigidity and accuracy.

Technical Leader

F500PLUS

mm(in)

kg(lb)

-

r/min

kW(HP)

EA

mm(in)

m/min(ipm)

1,200×500 (47.2″×19.7″)800 (1,764)

BBT408,000 [10,000] [12,000]

15 (20) [18.5 (24.8)] [18.5 (24.8)]30

1,060/510/635 (41.7″/20.1″/25″)36/36/30 (1,417/1,417/1,181)

Table SizeMax.Load CapacitySpindle TaperSpindle RPMSpindle OutputNo. of ToolsTravel (X/Y/Z)Rapid Traverse Rate

F400

mm(in)

kg(lb)

-

r/min

kW(HP)

EA

mm(in)

m/min(ipm)

1,000×460 (39.4″×18.1″)600 (1,323)

BT40 [BBT40]8,000 [8,000][12,000] [8,000] [8,000] [12,000]15 (20) [15 (20)] [11 (14.7)] [13.5 (18.1)] [15.8 (21)] [15.8 (21)]

24 [30]800/460/520 (31.5″/18.1″/20.5″)

32/32/32 (1,260/1,260/1,260)


F500/50

mm(in)

kg(lb)

-

r/min

kW(HP)

EA

mm(in)

m/min(ipm)

1,200×500 (47.2″×19.7″)800 (1,764)

BT50 [BBT50]6,000 [6,000]

15 (20) [27.8 (37.3)]24

1,100/510/635 (43.3″/20.1″/25″)36/36/30 (1,417/1,417/1,181)


F650PLUS

mm(in)

kg(lb)

-

r/min

kW(HP)

EA

mm(in)

m/min(ipm)

1,600×650 (63″×25.6″)1,300 (2,866)

BBT408,000 [10,000]

15 (20) [18.5 (24.8)]30

1,400/660/635 (55.1″/26″/25″)36/36/30 (1,417/1,417/1,181)


F650/50

mm(in)

kg(lb)

-

r/min

kW(HP)

EA

mm(in)

m/min(ipm)

1,600×650 (63″×25.6″)1,300 (2,866)

BT50 [BBT50]6,000 [6,000]

15 (20) [27.8 (37.3)]24

1,400/660/635 (55.1″/26″/25″)36/36/30 (1,417/1,417/1,181)


[SIEMENS]

[SIEMENS]

[SIEMENS]





The Fastest, the Most Versatile High-end Linear Machining Center

F400/500/650● High accuracy headstock features a high precision angular contact bearing

● High power, high torque headstock for efficiency and precision in cutting

● Latest servo ATC implementation for the quickest tool change

● Fast feed rates through the 4 way Y-axis (F650 Series)

● Roller guide way for high accuracy cutting (F500 Series, F650 Series)

● Latest SIEMENS 828D controls with wide range of supporting software (F400, F500/50, F650/50)





01 F400 Basic FeaturesHigh Speed & Productivity Vertical Machining Center

F400/500/650

Direct SpindleThe directly coupled spindle at a max rev of 12,000rpm, allows high speed machining. Additionally, the large diameter and the thickness of the spindle add stability to the machine.

Table & Machining Area

Double Anchored BallscrewIn order to eliminate thermal growth and increase accuracy, all axis are driven by high precision double anchored ballscrews. The pretensioned and double anchored design provides outstanding positioning and repeatability with virtually no thermal growth.

Directly Coupled Servo MotorThe ballscrews are directly coupled to the servo motor. This eliminates the need for any transmission parts, which may impact machine accuracy and efficiency.

03

01

02

460(18.1″)

460(18.1″)

635(25″)

150(5.9″)

100(3.93″)

800(31.4″)

100(3.93″)

600 kg (1,323 lb)

◉ Table Size (X/Y axis) : 1,000/460 mm (39.4″/18.1″)





04+

05

F4

00/5

00/6

50Ve

rtic

al M

achi

ning

Cen

ter

HYU

ND

AI W

IAM

ACH

INE

TOO

L

Basic Features

01

03

02

◉ Spindle Speed : 8,000 [8,000] [12,000] [8,000] [12,000] rpm

◉ Spindle Output (Max./Cont.) : 15/11 [15/11] [11/7.5] [13.5/9] [15.8/10.5] [15.8/10.5] kW

(20/14.7 [20/14.7] [14.7/10] [18.1/12] [21/14.8] [21/14.1] HP)

◉ Spindle Torque (Max./Cont.) : 95/70 [95/70] [70/45] [95/63] [95/63] [95/63] N.m

(70/51.6 [70/51.6] [51.6/33.2] [70/46.5] [70/46.5] [70/46.5] lbf.ft)

◉ Rapid Traverse Rate (X/Y/Z axis) :

32/32/32 m/min (1,260/1,260/1,260 ipm)

◉ Travel (X/Y/Z axis) :

800/460/520 mm (31.5″/18.1″/20.5″)

[SIEMENS]

High precision & High speed Vertical Machining Center





02 F500PLUS Basic FeaturesHigh Speed & Productivity Vertical Machining Center

F400/500/650

Roller Type LM GuideDue to the rigidity of the linear roller guide, the feed rates on the F500PLUS are fast and reduce cutting time.


Double Anchored BallscrewIn order to eliminate thermal growth and increase accuracy, all axis are driven by high precision double anchored ballscrews. The pretensioned and double anchored design provides outstanding positioning and repeatability with virtually no thermal growth.


03

02

01

500(19.7″)

150(5.9″)

70(2.7″)

70(2.7″)

1060 (41.7″)

500(19.7″)

800 kg (1,764 lb)

◉ Table Size (X/Y axis) : 1,200/500 mm (47.2″/19.7″)

635(25″)





High Precision & High Speed Vertical Machining Center◉ Spindle Speed F500 PLUS : 8,000 [10,000] [12,000] rpm F500/50 : 6,000 [6,000] rpm

◉ Spindle Output (Max./Cont.) F500PLUS : 15/11 [18.5/15] [18.5/11] kW (20/14.7 [24.8/20][24.8/14.7] HP)

F500/50 : 15/11[27.8/18.5] kW (20/14.7 [37.3/24.8] HP)

◉ Spindle Torque (Max./Cont.) F500PLUS : 286/143 [117.6/95.3] [117.7/70] N.m

(211/105.5 [86.7/70.3] [86.8/51.6] lbf.ft)

F500/50 : 358/179 [294/196] N.m (264/132 [216.8/144.6] lbf.ft)

06+

07

F4

00/5

00/6

50Ve

rtic

al M

achi

ning

Cen

ter

HYU

ND

AI W

IAM

ACH

INE

TOO

L

Basic Features

01

02

03

Solid Body High ColumnHigh column of 300mm(11.8") is provided.


36/36/30 m/min (1,417/1,417/1,181 ipm)

◉ Travel (X/Y/Z axis)

F500 Plus : 1,060/510/635 mm (41.7″/20.1″/25″)

F500/50 : 1,100/510/635 mm (43.3″/20.1″/25″)

[SIEMENS]





03 F650PLUS Basic FeaturesHigh Speed & Productivity Vertical Machining Center

F400/500/650

4 WAY Y-axisThe 4 slide ways on Y-axis eliminate overhang and increase accuracy throughout the full extent of travel.


Double Anchored Ball ScrewIn order to eliminate thermal growth and increase accuracy, all axis are driven by high precision double anchored ballscrews. The pretensioned and double anchored design provides outstanding positioning and repeatability with virtually no thermal growth.


04

0302

01

Roller Type LM GuideDue to the rigidity of the linear roller guide, the feed rates on the F650PLUS are fast and reduce cutting time.

650(25.6″)

1,400(55.1″)

650(25.6″)1,300 kg (2,866 lb)

◉ Table Size (X/Y axis) : 1,600/650 mm (63″/25.6″)

635(25″)

150(5.9″)

100(3.93″)

100(3.93″)





High precision & High speed Vertical Machining Center◉ Spindle Speed F650PLUS : 8,000 [10,000] rpm F650/50 : 6,000 [6,000] rpm

◉ Spindle Output (Max./Cont.) F650PLUS : 15/11 [18.5/15] kW (20/14.7 [24.8/20] HP)

F650/50 : 15/11 [27.8/18.5] kW (20/14.7 [37.3/24.8] HP)

◉ Spindle Torque (Max./Cont.) F650PLUS : 286/143 [117.6/95.3] N.m (211/105.5 [86.7/70.3] lbf.ft)

F650/50 : 358/179 [294/196] N.m (264/132 [216.8/144.6] lbf.ft)

08+

09

F4

00/5

00/6

50Ve

rtic

al M

achi

ning

Cen

ter

HYU

ND

AI W

IAM

ACH

INE

TOO

L

Basic Features

01

03

04

02

Solid Body High ColumnHigh column of 300mm(11.8") is provided.


36/36/30 m/min (1,417/1,417/1,181 ipm)

◉ Travel (X/Y/Z axis) : 1,400/660/635 mm (55.1″/26″/25″)





Spindle CoolingThe spindle cooling system minimizes thermal displacement which can happen during lengthy machining operations, and offers continued accuracy based on the thermal stability.

Dual Contact SpindleThe Big Plus spindle system (BBT40) provides dual contact between the spindle face and the flange face of the tool holder.This greatly increases tool rigidity, reduces run out and adds significant productivity to machining applications.

❖ The increase in standard diameter improves rigidity and ATC interactive precision, and Z-axis displacement revention further extends tool life.

Before Clamping After Clamping

Clamping

Non Contact Contact

Axial Movement is Important for Face Contact

04 F400 SpindleLong Lasting High Accuracy & Excellent PerformanceVertical Machining CenterF400/500/650

Direct Type SpindleDirect coupling of the motor and the spindle reduces deceleration time, and provides easy maintenance.





Spindle

10+

11

F4

00/5

00/6

50Ve

rtic

al M

achi

ning

Cen

ter

HYU

ND

AI W

IAM

ACH

INE

TOO

L

Power (kW) Torque (N.m)

0

15.8[21]

10.5[14.1]

95[70]

63[46.5]

8,0004,0002,000

Spindle Speed (r/min)

15.8kW[21HP] (S6-40%)

95N∙m[70lbf∙ft] (S6-40%)

10.5kW[14.1HP] (Cont.)

63N∙m[46.5lbf∙ft] (Cont.)

Power (kW[HP]) Torque (N∙m[lbf∙ft])

0

15[20]

11[14.7] 95[70]

70[51.6]

8,0003,5001,500

15kW[20HP] (30min)

95N∙m[70lbf∙ft] (30min) 11kW[14.7HP] (Cont.)



0

11[14.7]

7.5[10] 70[51.6]

47[33.2]

12,0007,0001,500

11kW[14.7HP] (30min)

70N∙m[51.6lbf∙ft] (30min) 7.5kW[10HP] (Cont.)





0

13[18.1]

9[12]

95[70]

63[46.5]

8,0003,500 4,500500 1,500


13.5kW[18.1HP] (30min)

95N∙m[70lbf∙ft] (30min)

9kW[12HP] (Cont.)



0

15.8[21]

10.5[14.1]

95[70]

63[46.5]

12,0004,000500 2,000


15.8kW[21HP] (30min)


10.5kW[14.1HP] (Cont.)


FANUC Spindle SIEMENS Spindle

Through Spindle CoolantThrough Spindle Coolant is exceedingly useful when drilling deep holes. It helps increase the lifetime of the tool, while decreasing cycle time.❖ F400 8,000rpm Direct Spindle Non Applicable

20 bar / 30 bar / 70 bar

(290 psi / 435 psi / 1,015 psi)

F400 (8,000rpm : Belt, Direct)

F400 (12,000 rpm : Direct)

F400 (8,000 rpm : Belt)

F400 (8,000 rpm : Direct)

F400 (12,000 rpm : Direct)





05 F500/650 PLUS SpindleLong Lasting High Accuracy & Excellent PerformanceVertical Machining CenterF400/500/650

Through Spindle CoolantThrough Spindle Coolant is exceedingly useful when drilling deep holes. It helps increase the lifetime of the tool, while decreasing cycle time.

20 bar / 30 bar / 70 bar

Dual Contact Spindle(F500/50 | F650/50 : )

The Big Plus spindle system (BBT40) provides dual contact between the spindle face and the flange face of the tool holder.This greatly increases tool rigidity, reduces run out and adds significant productivity to machining applications.❖ The increase in standard diameter improves rigidity and ATC interactive precision, and Z-axis displacement

revention further extends tool life.

Before Clamping After Clamping

Clamping

Non Contact Contact

Axial Movement is Important for Face Contact

(290 psi / 435 psi / 1,015 psi)

Main SpindleF500/650PLUS applies belt driven spindle which generates less noise and is convenient for maintenance.

Also, F500 PLUS provides direct drive spindle as an option which has maximum speed of 12,000rpm. It is designed with highly precise angular ball bearings where the spindle is directly connected with the motor to reduce acc/deceleration time.

Spindle CoolingThe spindle cooling system minimizes thermal displacement which can happen during lengthy machining operations and accurate machining is possible based on thermal stability.

F500/650 PLUS Belt Driven Spindle(Thermal Displacement : 35% improvement, Acc/deceleration : 8.3% improvement)

Compared with the previous models, thermal displacement and the acc/deceleration has been improved by 35% and 8.3% respectively. It enhances machining ability with reduced non-cutting time so it is possible to machine highly precise products.

Belt Damage Alarm SystemF500/650 PLUS features a unique alarm system that activates when the belts on the main spindle are damaged. It increases machining stability.






Spindle Speed (r/min)0

15[20]

11[14.7]

7.5[10]

286[211]

95[70]

18[13.3]9[6.6]

143[105.5]

8,0006,000500 750

15kW[20HP] (30min)

11kW[14.7HP] (Cont.)



15[20]

11[14.7]

18.5[24.8] 117.6

[86.7]

95.3[70.3]

12,00010,0001,500



15[20]

11[14.7]

7.5[10]

358[264]

179[132]

6,0004,800400 600


179N∙m[132lbf∙ft] (Cont.)



15[20]

18.5[24.8] 117.6

[86.7]

95.3[70.3]

10,0001,50035

18.5kW[24.8HP] (30min)

15kW[20HP] (Cont.)

117.6N∙m[86.7lbf∙ft] (30min)

95.3N∙m[70.3lbf∙ft] (Cont.)



15kW[20HP] (30min)11kW[14.7HP] (Cont.)

18.5kW[24.8HP] (S3 25%)

15kW[20HP] (S3 60%)


117.7N∙m[86.8lbf∙ft] (S3 25%)

95.5N∙m[70.4lbf∙ft] (S3 60%)




27.8[37.3]

18.5[24.8] 294

[216.8]

196[144.5]

6,0004,0001,500

27.8kW[37.3HP] (S6-40%)

18.5kW[24.8HP] (Cont.)294N.m[216.8lbf∙ft] (S6-40%)

196N.m[144.6lbf∙ft] (Cont.)

F500/50, F650/50 (6,000 rpm Belt)The 1PH8 Series is a high quality performance motor providing concentricity of 10㎛ and fast response time. They operate smoothly in extreme environments such as high temperature, dust and dirt. Heat emission minimizing design makes it possible to maintain a degree of accuracy at all time.

1PH8 Spindle Motor

12+

13

F4

00/5

00/6

50Ve

rtic

al M

achi

ning

Cen

ter

HYU

ND

AI W

IAM

ACH

INE

TOO

L

Spindle



15[20]

11[14.7]

7.5[10]

286[211]

95[70]

18[13.3]9[6.6]

143[105.5]

8,0006,000500 750

15kW[20HP] (30min)




15[20]

11[14.7]

18.5[24.8] 117.6

[86.7]

95.3[70.3]

12,00010,0001,500



15[20]

11[14.7]

7.5[10]

358[264]

179[132]

6,0004,800400 600


179N∙m[132lbf∙ft] (Cont.)



15[20]

18.5[24.8] 117.6

[86.7]

95.3[70.3]

10,0001,50035

18.5kW[24.8HP] (30min)

15kW[20HP] (Cont.)

117.6N∙m[86.7lbf∙ft] (30min)

95.3N∙m[70.3lbf∙ft] (Cont.)



15kW[20HP] (30min)11kW[14.7HP] (Cont.)

18.5kW[24.8HP] (S3 25%)

15kW[20HP] (S3 60%)


117.7N∙m[86.8lbf∙ft] (S3 25%)

95.5N∙m[70.4lbf∙ft] (S3 60%)




27.8[37.3]

18.5[24.8] 294

[216.8]

196[144.5]

6,0004,0001,500

27.8kW[37.3HP] (S6-40%)

18.5kW[24.8HP] (Cont.)294N.m[216.8lbf∙ft] (S6-40%)

196N.m[144.6lbf∙ft] (Cont.)

F500/650 PLUS (8,000 rpm Belt)

F500 PLUS (12,000 rpm Direct)

F500/650 PLUS (10,000 rpm Belt)

F500/50, F650/50 (6,000 rpm Belt)

FANUC Spindle





06 ATC & MagazineHigh Productivity Achieved with Rigidity and Accuracy in MachiningF400/500/650

24 Tool Magazine 30 Tool Magazine





14+

15

F4

00/5

00/6

50Ve

rtic

al M

achi

ning

Cen

ter

HYU

ND

AI W

IAM

ACH

INE

TOO

L

Peripheral Device

MagazineThe tool magazine holds 24 tools as standard and 30 tools as an option. <F500/650PLUS : 30 Tools Standard>Due to the wider selection of tools and the random tool selection method, tool change time has been improved.

◉ No. of Tools :

F400 : 24 [30] EA

F500/650 Plus : 30 EA

◉ Tool Shank

F400 : BT40 [BBT40]

F500/650PLUS : BBT40◉ Max. Tool Dia. (W.T)

F400 :

Ø90/Ø150 (Ø3.5″/Ø5.9″)

F500/650PLUS :

Ø80/Ø125 (Ø3.1″/Ø4.9″)

◉ Max. Tool Weight : 8 kg (17.6 lb)

◉ Tool Selection Method :

Random

◉ No. of Tools : 24 EA

◉ Tool Shank : BT50 [BBT50]

◉ Max. Tool Dia. (W.T)

Ø110/Ø200 (Ø4.3″/Ø7.9″)

◉ Max. Tool Weight : 15 kg (33.1 lb)

◉ Tool Selection Method :

Random

F400 | F500/650PLUS

F500/50 | F650/50

Servo ATCPosition control of the twin arm ATC using servo motors has been improved drastically. Also the tool changing speed has been improved, leading to the reduction of non-cutting time.

Tool to Tool Time : 20% Improvement

Chip to Chip Time : 6% Improvement

F500PLUS Standard





07 Machining CapabilityHigh Performance, High Accuracy CuttingVertical Machining CenterF400/500/650





Machining

❖ The above result might be different based on your processing circumstances

16+

17

F4

00/5

00/6

50Ve

rtic

al M

achi

ning

Cen

ter

HYU

ND

AI W

IAM

ACH

INE

TOO

L

FACE MILL 〈Material〈JIS〉:S45C(Carbon steel)〉

Tool diameterCutting depthCutting widthCutting speedSpindle rpmFeed rateChip quantity

Ø80 (Ø3.15″) x 5F5.5 mm (0.216″)70 mm (2.755″)236 mm/min (9.29 ipm)1,137 r/min0.99 mm/rev (0.038″/rev)430 cc/min

DRILL 〈Material〈JIS〉:S45C(Carbon steel)〉

Tool diameterCutting depthCutting speedSpindle rpmFeed rateChip quantity

Ø43 (Ø1.69″)43 mm (1.69″)27 mm/min (Ø1.06 ipm)199 r/min0.38 mm/rev (0.014″/rev)109 cc/min

TAP. 〈Material〈JIS〉:S45C(Carbon steel)〉

Tap spec./PitchCutting depthCutting speedSpindle rpmFeed rate

M42 x P4.542 mm (1.65″)7 mm/min (0.27 ipm)53 r/min4.5 mm/rev (0.177″/rev)

F400 F500PLUS FACE MILL 〈Material〈JIS〉:S45C(Carbon steel)〉

Tool diameterCutting depthCutting widthCutting speedSpindle rpmFeed rateChip quantity

Ø80 (Ø3.15″) x 6F3 mm (0.118″)70 mm (2.755″)286 mm/min (11.26 ipm)1,137 r/min 0.9 mm/rev (0.035″/rev)210 cc/min

DRILL 〈Material〈JIS〉:S45C(Carbon steel)〉

Tool diameterCutting depthCutting speedSpindle rpmFeed rateChip quantity

Ø32 (Ø1.25″)40 mm (1.57″)24 mm/min (0.94 ipm)268 r/min0.2 mm/rev (0.007″/rev)43 cc/min

TAP. 〈Material〈JIS〉:S45C(Carbon steel)〉

Tap spec./PitchCutting depthCutting speedSpindle rpmFeed rate

M24 x P3.040 mm (1.57″)8 mm/min (0.31ipm)106 r/min3 mm/rev (0.118″/rev)

Sample Workpieces





HW-AFCHYUNDAI WIAAdaptive Feed Control

Software that controls the feed automatically to maintain a certain working load to extend tool life as well as productivity.

(FANUC)HW-MCSHYUNDAI WIAMachining Condition Selection

Software that automatically sets cutting and feeding parameters according to the machining types (speed, degree, quality)

Mold-related Software

(FANUC)

Intelligent Machining

Machine Monitoring

High Precision

High Productivity Energy Savin

g

HW-TM | HW-MCS | HW-A

FC

HW-TOM HW-ESS

User Friendly

HW-MMSHW-TDC | HW

-WARM

UP

HYUNDAI WIA Smart System for Vertical Machining Center

User Convenience

HW-eDNC

HW-MCG

Faster processing and enhanced accuracy in are possiblethrough the HYUNDAI WIA Smart System. The user friendly software and equipment monitoring of the Smart System maximizes productivity.

08 Smart SystemSoftware for smart operating and machiningF400/500/650





HW-TDCHYUNDAI WIA Thermal Displacement Compensation

Software that measures the changes in the external environment as well as heat emission during processing to help reduce thermal displacement.

HW-ESSHYUNDAI WIAEnergy Saving System

An environmental friendly software that reduces the unnecessarily wasted standby power waiting for an operation.

HW-MCGHYUNDAI WIAMachine Guidance

Software that offers operation, maintenance, management monitoring and various user friendly features.

HW-WARMUPHYUNDAI WIAWARMing Up

Warm-up software that measures main spindle halt and offers system warm-up time automatically.

HW-TOMHYUNDAI WIATool Offset Measurement

User friendly GUI software that indicates tool length, diameter, and damage (H/W excluded)

HW-MMS

RemoteSystem

Smart Factory HW-MMS (HYUNDAI WIA-Machine Monitoring System)

A brand new manufacturing machine by HYUNDAI WIA, HW-MMS is a unique software capable of monitoring the operation status of manufacturing machines in factories, a smart solution to improve manufacturing conditions of customers.

01 05

04

03

Real-time monitoring of machine operation status (Cloud)

History and statistics of machine operation (Cloud)

History and statistics of alarm occurrence (Cloud)

History and statistics of work count (Cloud)

Remote diagnosis (Remote)

01

05

04

03

02

02

HW-TMHYUNDAI WIATool Monitoring

A tool monitoring software which analyzes the load of the spindle motor to determine and monitor possible damage of tools.

(FANUC)

(FANUC) (FANUC)

HYUNDAI WIA Smart System

18+

19

F4

00/5

00/6

50Ve

rtic

al M

achi

ning

Cen

ter

HYU

ND

AI W

IAM

ACH

INE

TOO

L





DIFFERENTIATED CAPABILITIES, INTEGRATED ENGINEERING PERFECTLY INTERLINKEDSIEMENS 828D is a latest model CNC. It is designed for horizontal/vertical all-purpose equipment.

Its 80-bit control reduces processing time and increases productivity. The 828D is easy to maintain and run, with its easy setup functions.

09 SIEMENS ControllerSoftware for smart operating and machining

F400/500/650





• Dialogue-type programming, simple and convenient

• Effective specifications for small quantity batch production

• Step-by-step operation possible without knowledge of the DIN/ISO code

Shop Mill

• 3D confirmation of the completed processing configuration of the NC program is possible.

•Offers standards for 2D simulation.• Possible to confirm the simulation of the

NC grogram during processing.

3D Simulation

• Easy to install/uninstall an option (Ex : barfeeder and chip conveyor, etc.)

• Possible to install in one motion without revision of individual perimeters.

• A spate list is unnecessary as option items are indicated with letters.

Easy Extend

Easy input/output of a program is possible as a USB memory card, a CF memory card and LAN can all be used.

Variable Communication Port

RJ 45 Ethernet

USB 2.0

Compact Flash Card

If the ISO Dialect (G291) is ordered, JIS-based G-code programs can be used. (Standard)

SIEMENS Technology SIEMENS Communication

ISO CodeProgramming

SIEMENS 828D comes with Advanced Surface, metal processing software that monitors speed and accuracy.

20+

21

F4

00/5

00/6

50Ve

rtic

al M

achi

ning

Cen

ter

HYU

ND

AI W

IAM

ACH

INE

TOO

L

SIEMENS

SIEMENS Advanced Surface

Speed

Speed

SINUMERIK + SINAMICS 80bit NANO FP Accuracy

Machining Time Time : 48 min

Unblanced Velocity

Machining Time Time : 33 min

Blanced Velocity





User ConvenienceVarious Devices for User Convenience

Hydraulic Supply UnitInstead of the standard hydraulic supply unit, an optional fixture unit can bring the pressure up to 100 bar,(1,450 bar,) maximizing the clamping force on the fixture.

NC Rotary TableThe NCRT makes it possible to machin up to 5-axis.Various types of products can be machined.

U-CenterThe U-Center makes external and internal diameter turning possible, allowing for a wide range of variety in products.

Measuring Device

Hydraulic Device

Precision Device

10F400/500/650

Touch SensorWorkpiece coordinate values can be set automatically using the optional spindle probe.

TLM - Laser & TouchTool lengths and diameters can be set automatically using the optional tool setter. This can also be used to monitor tool attrition and detect broken tools.

Laser Type

Touch Type





Optional

•Hinge Belt Type : Highly efficient when disposing a lot of chips. Capable of handling stringy chips. (Long Chip)•Scraper Type : Convenient for shortly cut chips.. (Short Chip)•Drum Filter Type : Advantageous in precision, as the chips do not flow in to the coolant nozzle. (AL Chip)

Timely and effective disposal of chips will enhance productivity as well as the working environment.

22+

23

F4

00/5

00/6

50Ve

rtic

al M

achi

ning

Cen

ter

HYU

ND

AI W

IAM

ACH

INE

TOO

L

Chip Conveyor Front (Left)

Chip Conveyor Rear (Left)

Chip Conveyor

Gantry Loader SystemImplementation of high speed gantry loaders is possible as well as the construction of flexible automation cells by a work stocker. Optimization of the installation space is also possible.

Work Stocker

Chip Disposal Process (F500PLUS)

Std. Coolant (Nozzle)

Bed Flushing Coolant

Through Spindle Coolant

(20/30/70 bar [290/435/1,015 psi)

Jet Coolant

Gun Coolant

Side Oil Hole Coolant

Standard

Standard

Option

Option

Option

Option

Coolant Unit (F500/650PLUS Std.)





Through Spindle Coolant* : Please check the filter types with sales representative. Specifications are subject to change without notice for improvement.

SPECIFICATIONS

Standard & OptionalSpindle F400

8,000rpm (Direct) FANUC ●8,000rpm (Belt) FANUC ○8,000rpm (Belt) SIEMENS ○8,000rpm (Direct) SIEMENS ○12,000rpm (Direct) FANUC ○12,000rpm (Direct) SIEMENS ○

Spindle Cooling SystemStd. ○12K ●

ATC

ATC Extension24 ●30 ○

Tool Shank TypeBT40 ●BBT40 ○CAT40/BCV40 ○

U-Center D'andrea ○

Pull Stud45° ●60° -90° -

Table & ColumnAPC -Tap Type Pallet -T-Slot Pallet ●NC Rotary Table ☆High Column 200mm (7.8″) ○Coolant SystemStd. Coolant (Nozzle) ●Bed Flushing Coolant ●

Through spindle coolant*(8,000rpm BELT)

20bar (290 psi) ○30bar (435 psi),20ℓ(5.3 gal)

○

70bar (1,015 psi), 15ℓ(4 gal)

○

70bar (1,015 psi), 30ℓ(7.9 gal)

○

Top Cover ●Jet Coolant ○Gun Coolant ○Side Oil Hole Coolant ☆Air Gun ○Cutting Air Blow ○Tool Measuring Air Blow (Only for TLM) ○Air Blow for Automation ☆Thru MQL Device (Without MQL) ☆Coolant Chiller ☆Power Coolant System (For Automation) ☆Chip DisposalCoolant Tank 300ℓ(79.2 gal) ●Cabin Screw Chip Conveyor -Chip Conveyor(Hinge/Scraper)

Left(Left) ○Left(Rear) ○

Special Chip Conveyor (Drum Filter) ☆

Chip Wagon

Standard(180ℓ[47.5 gal])

○

Swing(200ℓ[52.8 gal])

○

Large Swing(290ℓ[76.6 gal])

○

Large Size(330ℓ[87.2 gal])

☆

Customized ☆S/WMachine Guidance (HW-MCG) : FANUC/SIEMENS ☆/-Tool Monitoring (HW-TM) ○DNC Software (HW-eDNC) ○Spindle Heat Distortion Compensation (HW-TDC) ○Spindle Warm up Function (HW-WARMUP) : FANUC/SIEMENS ☆/-Energy Saving System (HW-ESS) : FANUC/SIEMENS ☆/-Machine Monitoring System (HW-MMS) ○

S/W F400

Tool Offset Measurement (HW-TOM) ☆Machining Condition Selection (HW-MCS) : FANUC/SIEMENS ☆/-Adaptive Feed Control (HW-AFC) : FANUC/SIEMENS ☆/-Conversational Program (HW-DPRO) ○Safety DeviceTotal Splash Guard ●Electric DeviceCall Light 1 Color : ■ ●Call Light 2 Color : ■■ ○Call Light 3 Color : ■■■ ○Call Light & Buzzer 3 Color : ■■■B ○Work Light ●Electric Cabinet Light ○Remote MPG ●

3 Axis MPGFANUC ○SIEMENS -

Work Counter Digital ○Total Counter Digital ○Tool Counter Digital ○

Multi Tool Counter6 EA ○9 EA ○

Electric Circuit Breaker ○AVR (Auto Voltage Regulator) ☆Transformer 25kVA ○Auto Power Off ○Back up Module for Black out ○Measuring Device

Air ZeroTACO ○SMC ○

Work Measuring Device ○TLM(Marposs/Renishaw/Blum)

Touch ○Laser ○

Tool Broken Detective Device ☆Linear Scale X/Y/Z Axis ○Coolant Level Sensor (Only for Chip Conveyor, Bladder Type)

☆

EnvironmentAir Conditioner ○Dehumidifier ○Oil Mist Collector ○Oil Skimmer (Only for Chip Conveyor) ○MQL (Minimal Quantity Lubrication) ☆Fixture & Automation

Auto DoorStd. ○High Speed ☆

Auto Shutter (Only for Automatic System) -Sub O/P ☆

NC Rotary TableI/FSingle ○Channel ☆

Control of Additional Axis1Axis ○2Axis ☆

External M Code 4ea ○Automation Interface ☆

I/O Extension (In & Out)16 Contact ○32 Contact ○

Hyd. Device

Std. Hyd. Unit65bar (942.7 psi) / 20ℓ(5.3 gal)

●

Hyd. Unit for Fixture

45bar (652.7 psi) ○70bar (1,015 psi) ○100bar (1,450 psi) ○Customized ☆

ETCTool Box ●Customized Color Need for Munsel No. ☆CAD&CAM Software ☆

● : Standard ○ : Option ☆ : Prior Consultation - : Non Applicable





Standard & Optional ● : Standard ○ : Option ☆ : Prior Consultation - : Non Applicable


24+

25

F4

00/5

00/6

50Ve

rtic

al M

achi

ning

Cen

ter

HYU

ND

AI W

IAM

ACH

INE

TOO

L

SPECIFICATIONS

Spindle F500 Plus F500/50

8,000rpm (Belt) FANUC ● -6,000rpm (Belt) FANUC - ●6,000rpm (Belt) SIEMENS - ○10,000rpm (Belt) FANUC ○ -12,000rpm (Direct) FANUC ○ -

Spindle Cooling SystemStd. ○ ●10K, 12K ● -

ATC

ATC Extension24 - ●30 ● -

Tool Shank Type

BT40 ○ -BBT40 ● -BT50 - ●BBT50 - ○CAT40/BCV40 ○ -CAT50/BCV50 - ○

U-Center D'andrea ☆ ☆

Pull Stud45° ● ●60° ☆ ☆90° ☆ ☆

Table & ColumnAPC - -Tap Type Pallet - -T-Slot Pallet ● ●NC Rotary Table ☆ ☆High Column 300mm (11.8″) ○ ○Coolant SystemStd. Coolant (Nozzle) ● ●Bed Flushing Coolant ● ●


20bar (290 psi) ○ ○30bar (435 psi),20ℓ(5.3 gal)

○ ○

70bar (1,015 psi), 15ℓ(4 gal)

○ ○

70bar (1,015 psi), 30ℓ(7.9 gal)

○ ○

Top Cover ● ●Jet Coolant ○ ○Gun Coolant ○ ○Side Oil Hole Coolant ○ ○Air Gun ○ ○Cutting Air Blow ○ ○Tool Measuring Air Blow (Only for TLM) ○ ○Air Blow for Automation ☆ ☆Thru MQL Device (Without MQL) ☆ ☆Coolant Chiller ☆ ☆Power Coolant System (For Automation) ☆ ☆Chip DisposalCoolant Tank 350ℓ(92.5 gal) ● ●Cabin Screw Chip Conveyor ○ ○Chip Conveyor(Hinge/Scraper)

Left(Left) ○ ○Left(Rear) ☆ ☆

Special Chip Conveyor (Drum Filter) ○ ○

Chip Wagon


○ ○


○ ○


○ ○


○ ○

Customized ☆ ☆S/WMachine Guidance (HW-MCG) : FANUC/SIEMENS ☆ ☆/-Tool Monitoring (HW-TM) ○ ○DNC Software (HW-eDNC) ○ ○Spindle Heat Distortion Compensation (HW-TDC) ○ ○Spindle Warm up Function (HW-WARMUP) : FANUC/SIEMENS ☆ ☆/-Energy Saving System (HW-ESS) : FANUC/SIEMENS ☆ ☆/-

S/W F500 Plus F500/50

Machine Monitoring System (HW-MMS) ○ ○Tool Offset Measurement (HW-TOM) ☆ ☆Machining Condition Selection (HW-MCS) : FANUC/SIEMENS ☆ ☆/-Adaptive Feed Control (HW-AFC) : FANUC/SIEMENS ☆ ☆/-Conversational Program (HW-DPRO) ○ ○Safety DeviceTotal Splash Guard ● ●Electric DeviceCall Light 1 Color : ■ ● ●Call Light 2 Color : ■■ ○ ○Call Light 3 Color : ■■■ ○ ○Call Light & Buzzer 3 Color : ■■■B ○ ○Work Light ● ●Electric Cabinet Light ○ ○Remote MPG ● ●

3 Axis MPGFANUC ○ ○SIEMENS - -

Work Counter Digital ○ ○Total Counter Digital ○ ○Tool Counter Digital ○ ○

Multi Tool Counter6 EA ○ ○9 EA ○ ○

Electric Circuit Breaker ○ ○AVR (Auto Voltage Regulator) ☆ ☆

Transformer25kVA ○ ○30kVA - -

Auto Power Off ○ ○Back up Module for Black out ○ ○Measuring Device

Air ZeroTACO ○ ○SMC ○ ○

Work Measuring Device ○ ○TLM(Marposs/Renishaw/Blum)

Touch ○ ○Laser ○ ○

Tool Broken Detective Device ☆ ☆Linear Scale X/Y/Z Axis ○ ○Coolant Level Sensor (Only for Chip Conveyor, Bladder Type)

☆ ☆

EnvironmentAir Conditioner ○ ○Dehumidifier ○ ○Oil Mist Collector ○ ○Oil Skimmer (Only for Chip Conveyor) ○ ○MQL (Minimal Quantity Lubrication) ☆ ☆Fixture & Automation

Auto DoorStd. ○ ○High Speed ☆ ☆

Auto Shutter (Only for Automatic System) ☆ ☆Sub O/P ☆ ☆

NC Rotary TableI/FSingle ○ ○Channel ☆ ☆

Control of Additional Axis1Axis ○ ○2Axis ☆ ☆

External M Code 4ea ○ ○Automation Interface ☆ ☆

I/O Extension (In & Out)16 Contact ○ ○32 Contact ○ ○

Hyd. Device

Std. Hyd. Unit

40bar (580 psi) / 15ℓ(4 gal)

- ●

70bar (1,015 psi) ○ ○100bar (1,450 psi) ○ ○Customized ☆ ☆

ETCTool Box ● ●Customized Color Need for Munsel No. ☆ ☆CAD&CAM Software ☆ ☆





Standard & Optional ● : Standard ○ : Option ☆ : Prior Consultation - : Non Applicable

SPECIFICATIONS


Spindle F650 Plus F650/50

8,000rpm (Belt) FANUC ● -6,000rpm (Belt) FANUC - ●6,000rpm (Belt) SIEMENS - ○10,000rpm (Belt) FANUC ○ -

Spindle Cooling SystemStd. ○ ●10K ● -

ATC

ATC Extension24 ○ ●30 ● -

Tool Shank Type

BT40 ○ -BBT40 ● -BT50 - ●BBT50 - ○CAT40/BCV40 ○ -CAT50/BCV50 - ○

U-Center D'andrea ☆ ☆

Pull Stud45° ● ●60° ☆ ☆90° ☆ ☆

Table & ColumnAPC - -Tap Type Pallet - -T-Slot Pallet ● ●NC Rotary Table ☆ ☆High Column 300mm (11.8″) ○ ○Coolant SystemStd. Coolant (Nozzle) ● ●Bed Flushing Coolant ● ●


20bar (290 psi) ○ ○30bar (435 psi),20ℓ(5.3 gal)

○ ○

70bar (1,015 psi), 15ℓ(4 gal)

○ ○

70bar (1,015 psi), 30ℓ(7.9 gal)

○ ○

Top Cover ● ●Jet Coolant ○ ○Gun Coolant ○ ○Side Oil Hole Coolant ○ ○Air Gun ○ ○Cutting Air Blow ○ ○Tool Measuring Air Blow (Only for TLM) ○ ○Air Blow for Automation ☆ ☆Thru MQL Device (Without MQL) ☆ ☆Coolant Chiller ☆ ☆Power Coolant System (For Automation) ☆ ☆Chip DisposalCoolant Tank 350ℓ(92.5 gal) ● ●Cabin Screw Chip Conveyor ○ ○Chip Conveyor(Hinge/Scraper)

Left(Left) ○ ○Left(Rear) ☆ ☆

Special Chip Conveyor (Drum Filter) ○ ○

Chip Wagon


○ ○


○ ○


○ ○


☆ ☆

Customized ☆ ☆S/WMachine Guidance (HW-MCG) : FANUC/SIEMENS ☆ ☆/-Tool Monitoring (HW-TM) ○ ○DNC Software (HW-eDNC) ○ ○Spindle Heat Distortion Compensation (HW-TDC) ○ ○Spindle Warm up Function (HW-WARMUP) : FANUC/SIEMENS ☆ ☆/-Energy Saving System (HW-ESS) : FANUC/SIEMENS ☆ ☆/-

S/W F650 Plus F650/50

Machine Monitoring System (HW-MMS) ○ ○Tool Offset Measurement (HW-TOM) ☆ ☆Machining Condition Selection (HW-MCS) : FANUC/SIEMENS ☆ ☆/-Adaptive Feed Control (HW-AFC) : FANUC/SIEMENS ☆ ☆/-Conversational Program (HW-DPRO) ○ ○Safety DeviceTotal Splash Guard ● ●Electric DeviceCall Light 1 Color : ■ ● ●Call Light 2 Color : ■■ ○ ○Call Light 3 Color : ■■■ ○ ○Call Light & Buzzer 3 Color : ■■■B ○ ○Work Light ● ●Electric Cabinet Light ○ ○Remote MPG ● ●

3 Axis MPGFANUC ○ ○SIEMENS - -

Work Counter Digital ○ ○Total Counter Digital ○ ○Tool Counter Digital ○ ○

Multi Tool Counter6 EA ○ ○9 EA ○ ○

Electric Circuit Breaker ○ ○AVR (Auto Voltage Regulator) ☆ ☆

Transformer25kVA - -30kVA ○ ○

Auto Power Off ○ ○Back up Module for Black out ○ ○Measuring Device

Air ZeroTACO ○ ○SMC ○ ○

Work Measuring Device ○ ○TLM(Marposs/Renishaw/Blum)

Touch ○ ○Laser ○ ○

Tool Broken Detective Device ☆ ☆Linear Scale X/Y/Z Axis ○ ○Coolant Level Sensor (Only for Chip Conveyor, Bladder Type)

☆ ☆

EnvironmentAir Conditioner ○ ○Dehumidifier ○ ○Oil Mist Collector ○ ○Oil Skimmer (Only for Chip Conveyor) ○ ○MQL (Minimal Quantity Lubrication) ☆ ☆Fixture & Automation

Auto DoorStd. ○ ○High Speed ☆ ☆

Auto Shutter (Only for Automatic System) ☆ ☆Sub O/P ☆ ☆

NC Rotary TableI/FSingle ○ ○Channel ☆ ☆

Control of Additional Axis1Axis ○ ○2Axis ☆ ☆

External M Code 4ea ○ ○Automation Interface ☆ ☆

I/O Extension (In & Out)16 Contact ○ ○32 Contact ○ ○

Hyd. Device

Std. Hyd. Unit

40bar (580 psi) / 15ℓ(4 gal)

- ●

70bar (1,015 psi) ○ ○100bar (1,450 psi) ○ ○Customized ☆ ☆

ETCTool Box ● ●Customized Color Need for Munsel No. ☆ ☆CAD&CAM Software ☆ ☆





unit : mm(in)External Dimensions

F400

548

(21.

6)

REARCHIP CONVEYOR

1950

(76.

8)

2450 (96.5) 90 (3.5)2540 (100)

1860 (73.2)

2994 (117.9)

2287

(90)

2498

(98.

3)

2833

(111

.5)

1950

(76.

8)60 (2.4

)

618(24.3)

LEFT SIDECHIP CONVEYOR

REARCHIP CONVEYOR

1900

(74.

8)20

5(8

.1)

F500

: 28

00 (1

10.2

) F5

00/5

0 : 2

876

(113

.2)

2573

(101

.3)

523

(20.

6)

2670 (105.1)

613(24.1)

ON

1950(76.8)

1134 (44.6)

1200

(47.

2)

415(16.3)

428(16.9)

120(4.7)

24To

ol :

2611

(102

.8)

30To

ol :

2760

(108

.7)

2055

(80.

9)

458(18)

1200

(47.

2)

905 (35.6) 1689 (66.5) 906 (35.6)

4814 (189.5)

350

(13.

8)44

0(1

7.3)

302

(11.

9)

2110

(83.

1)

386

(15.

2)63

2(2

4.9)

1314 (51.7)

1145

(45.

1)

340(13.4)

1795 (70.7)281(11.1)

708 (27.9)

1200

(47.

2)

280(11)

918(36.1)

1200

(47.

2)


340

(13.

4)15

60 (6

1.4)

1197

(47.

1)19

00 (7

4.8)

378

(14.

9)

2800 (110.2)

1200

(47.

2)

1263 (49.7)4063 (160)

2804

(110

.4)

2840

(111

.8)

2833

(111

.5)

548

(21.

6)REAR

CHIP CONVEYOR

1950

(76.

8)

2450 (96.5) 90 (3.5)2540 (100)

1860 (73.2)

2994 (117.9)

2287

(90)

2498

(98.

3)

2833

(111

.5)

1950

(76.

8)60 (2.4

)

618(24.3)


REARCHIP CONVEYOR

1900

(74.

8)20

5(8

.1)

F500

: 28

00 (1

10.2

) F5

00/5

0 : 2

876

(113

.2)

2573

(101

.3)

523

(20.

6)

2670 (105.1)

613(24.1)

ON

1950(76.8)

1134 (44.6)

1200

(47.

2)

415(16.3)

428(16.9)

120(4.7)

24To

ol :

2611

(102

.8)

30To

ol :

2760

(108

.7)

2055

(80.

9)

458(18)

1200

(47.

2)

905 (35.6) 1689 (66.5) 906 (35.6)

4814 (189.5)

350

(13.

8)44

0(1

7.3)

302

(11.

9)

2110

(83.

1)

386

(15.

2)63

2(2

4.9)

1314 (51.7)

1145

(45.

1)

340(13.4)

1795 (70.7)281(11.1)

708 (27.9)

1200

(47.

2)

280(11)

918(36.1)

1200

(47.

2)


340

(13.

4)15

60 (6

1.4)

1197

(47.

1)19

00 (7

4.8)

378

(14.

9)

2800 (110.2)

1200

(47.

2)

1263 (49.7)4063 (160)

2804

(110

.4)

2840

(111

.8)

2833

(111

.5)

26+

27

F4

00/5

00/6

50Ve

rtic

al M

achi

ning

Cen

ter

HYU

ND

AI W

IAM

ACH

INE

TOO

L

SPECIFICATIONS






F500PLUS

SPECIFICATIONS

548

(21.

6)

REARCHIP CONVEYOR

1950

(76.

8)

2450 (96.5) 90 (3.5)2540 (100)

1860 (73.2)

2994 (117.9)

2287

(90)

2498

(98.

3)

2833

(111

.5)

1950

(76.

8)60 (2.4

)

618(24.3)


REARCHIP CONVEYOR

1900

(74.

8)20

5(8

.1)

F500

: 28

00 (1

10.2

) F5

00/5

0 : 2

876

(113

.2)

2573

(101

.3)

523

(20.

6)

2670 (105.1)

613(24.1)

ON

1950(76.8)

1134 (44.6)

1200

(47.

2)

415(16.3)

428(16.9)

120(4.7)

24To

ol :

2611

(102

.8)

30To

ol :

2760

(108

.7)

2055

(80.

9)

458(18)

1200

(47.

2)

905 (35.6) 1689 (66.5) 906 (35.6)

4814 (189.5)

350

(13.

8)44

0(1

7.3)

302

(11.

9)

2110

(83.

1)

386

(15.

2)63

2(2

4.9)

1314 (51.7)

1145

(45.

1)

340(13.4)

1795 (70.7)281(11.1)

708 (27.9)

1200

(47.

2)

280(11)

918(36.1)12

00 (4

7.2)


340

(13.

4)15

60 (6

1.4)

1197

(47.

1)19

00 (7

4.8)

378

(14.

9)

2800 (110.2)

1200

(47.

2)

1263 (49.7)4063 (160)

2804

(110

.4)

2840

(111

.8)

2833

(111

.5)

548

(21.

6)

REARCHIP CONVEYOR

1950

(76.

8)

2450 (96.5) 90 (3.5)2540 (100)

1860 (73.2)

2994 (117.9)

2287

(90)

2498

(98.

3)

2833

(111

.5)

1950

(76.

8)60 (2.4

)

618(24.3)


REARCHIP CONVEYOR

1900

(74.

8)20

5(8

.1)

F500

: 28

00 (1

10.2

) F5

00/5

0 : 2

876

(113

.2)

2573

(101

.3)

523

(20.

6)

2670 (105.1)

613(24.1)

ON

1950(76.8)

1134 (44.6)

1200

(47.

2)

415(16.3)

428(16.9)

120(4.7)

24To

ol :

2611

(102

.8)

30To

ol :

2760

(108

.7)

2055

(80.

9)

458(18)

1200

(47.

2)

905 (35.6) 1689 (66.5) 906 (35.6)

4814 (189.5)

350

(13.

8)44

0(1

7.3)

302

(11.

9)

2110

(83.

1)

386

(15.

2)63

2(2

4.9)

1314 (51.7)

1145

(45.

1)

340(13.4)

1795 (70.7)281(11.1)

708 (27.9)

1200

(47.

2)

280(11)

918(36.1)

1200

(47.

2)


340

(13.

4)15

60 (6

1.4)

1197

(47.

1)19

00 (7

4.8)

378

(14.

9)

2800 (110.2)

1200

(47.

2)

1263 (49.7)4063 (160)

2804

(110

.4)

2840

(111

.8)

2833

(111

.5)

Please check the dimension with sales representative when applying 12K spindle.





SPECIFICATIONS

28+

29

F4

00/5

00/6

50Ve

rtic

al M

achi

ning

Cen

ter

HYU

ND

AI W

IAM

ACH

INE

TOO

L


F650PLUS

548

(21.

6)

REARCHIP CONVEYOR

1950

(76.

8)

2450 (96.5) 90 (3.5)2540 (100)

1860 (73.2)

2994 (117.9)

2287

(90)

2498

(98.

3)

2833

(111

.5)

1950

(76.

8)60 (2.4

)

618(24.3)


REARCHIP CONVEYOR

1900

(74.

8)20

5(8

.1)

F500

: 28

00 (1

10.2

) F5

00/5

0 : 2

876

(113

.2)

2573

(101

.3)

523

(20.

6)

2670 (105.1)

613(24.1)

ON

1950(76.8)

1134 (44.6)12

00 (4

7.2)

415(16.3)

428(16.9)

120(4.7)

24To

ol :

2611

(102

.8)

30To

ol :

2760

(108

.7)

2055

(80.

9)

458(18)

1200

(47.

2)

905 (35.6) 1689 (66.5) 906 (35.6)

4814 (189.5)

350

(13.

8)44

0(1

7.3)

302

(11.

9)

2110

(83.

1)

386

(15.

2)63

2(2

4.9)

1314 (51.7)

1145

(45.

1)

340(13.4)

1795 (70.7)281(11.1)

708 (27.9)

1200

(47.

2)280(11)

918(36.1)

1200

(47.

2)


340

(13.

4)15

60 (6

1.4)

1197

(47.

1)19

00 (7

4.8)

378

(14.

9)

2800 (110.2)

1200

(47.

2)

1263 (49.7)4063 (160)

2804

(110

.4)

2840

(111

.8)

2833

(111

.5)

548

(21.

6)

REARCHIP CONVEYOR

1950

(76.

8)

2450 (96.5) 90 (3.5)2540 (100)

1860 (73.2)

2994 (117.9)

2287

(90)

2498

(98.

3)

2833

(111

.5)

1950

(76.

8)60 (2.4

)

618(24.3)


REARCHIP CONVEYOR

1900

(74.

8)20

5(8

.1)

F500

: 28

00 (1

10.2

) F5

00/5

0 : 2

876

(113

.2)

2573

(101

.3)

523

(20.

6)

2670 (105.1)

613(24.1)

ON

1950(76.8)

1134 (44.6)

1200

(47.

2)

415(16.3)

428(16.9)

120(4.7)

24To

ol :

2611

(102

.8)

30To

ol :

2760

(108

.7)

2055

(80.

9)

458(18)

1200

(47.

2)

905 (35.6) 1689 (66.5) 906 (35.6)

4814 (189.5)

350

(13.

8)44

0(1

7.3)

302

(11.

9)

2110

(83.

1)

386

(15.

2)63

2(2

4.9)

1314 (51.7)

1145

(45.

1)

340(13.4)

1795 (70.7)281(11.1)

708 (27.9)

1200

(47.

2)

280(11)

918(36.1)

1200

(47.

2)


340

(13.

4)15

60 (6

1.4)

1197

(47.

1)19

00 (7

4.8)

378

(14.

9)

2800 (110.2)

1200

(47.

2)

1263 (49.7)4063 (160)

2804

(110

.4)

2840

(111

.8)

2833

(111

.5)





unit : mm(in)Table Dimensions

Ø90(Ø3.5)

Ø550(Ø21.7) Ø460

(Ø18.1)

100(3.9)

100(3.9)

42.5

(1.7

)42

.5(1

.7)

125

(4.9

)12

5(4

.9)

52.8

(2.1

)

224 (8.8)

460

(18.

1)

125

(4.9

)

800 (31.5)

1,000 (39.4)

Basic Hole

700 (27.6)

Ø458

(Ø18)

Ø55

3 (Ø

21.8

)

205(8.1)

205(8.1)

905 (35.6)

1,600 (63)

700 (27.6)700 (27.6) 5(0

.2)

5(0

.2)

125

(4.9

)12

5(4

.9)

650

(25.

6)

330

(13)

432

(17)

102

(4)

102

(4)

300

(11.

8)30

0 (1

1.8)

100

(3.9

)10

0(3

.9)

100

(3.9

)10

0(3

.9)

Ø553 (Ø21.8)

Ø95(Ø3.7)

Ø458 (Ø18)

1,200 (47.2)1,060 (41.7)70

(2.8)

205 (8.1)

102

(4)

70(2.8)

5(0

.2)

500

(19.

7)5

(0.2

)

50 (2)

50 (2)

100

(3.9

)10

0(3

.9)

100

(3.9

)10

0(3

.9)

100(3.9)

100(3.9)

12 (0.5

)20 (0.8

)

32 (1

.3)

30(1.2)Ø710(Ø28)

Ø600

(Ø23.6)

Ø110(Ø4.3)

1,200 (47.2)

1,100 (43.3)

5(0

.2)

500

(19.

7)5

(0.2

)

50(2)

50(2)

50 (2)

50 (2)

100

(3.9

)10

0(3

.9)

100

(3.9

)10

0(3

.9)

264.8(10.4)

141.

3(5

.6)

Detail T-Slot

12 (0.5

)20 (0.8

)

32 (1

.3)

30(1.2)

Detail T-Slot

T-SLOT DETAIL

Center 1-18Other 4-18

30 (1.2)

12 (0

.5)

20 (0

.8)

32 (1

.2)


F400

SPECIFICATIONS

F650 PLUS





unit : mm(in)Table Dimensions

Ø90(Ø3.5)

Ø550(Ø21.7) Ø460

(Ø18.1)

100(3.9)

100(3.9)

42.5

(1.7

)42

.5(1

.7)

125

(4.9

)12

5(4

.9)

52.8

(2.1

)

224 (8.8)

460

(18.

1)

125

(4.9

)

800 (31.5)

1,000 (39.4)

Basic Hole

700 (27.6)

Ø458

(Ø18)

Ø55

3 (Ø

21.8

)

205(8.1)

205(8.1)

905 (35.6)

1,600 (63)

700 (27.6)700 (27.6) 5(0

.2)

5(0

.2)

125

(4.9

)12

5(4

.9)

650

(25.

6)

330

(13)

432

(17)

102

(4)

102

(4)

300

(11.

8)30

0 (1

1.8)

100

(3.9

)10

0(3

.9)

100

(3.9

)10

0(3

.9)

Ø553 (Ø21.8)

Ø95(Ø3.7)

Ø458 (Ø18)

1,200 (47.2)1,060 (41.7)70

(2.8)

205 (8.1)

102

(4)

70(2.8)

5(0

.2)

500

(19.

7)5

(0.2

)

50 (2)

50 (2)

100

(3.9

)10

0(3

.9)

100

(3.9

)10

0(3

.9)

100(3.9)

100(3.9)

12 (0.5

)20 (0.8

)

32 (1

.3)

30(1.2)Ø710(Ø28)

Ø600

(Ø23.6)

Ø110(Ø4.3)

1,200 (47.2)

1,100 (43.3)

5(0

.2)

500

(19.

7)5

(0.2

)

50(2)

50(2)

50 (2)

50 (2)

100

(3.9

)10

0(3

.9)

100

(3.9

)10

0(3

.9)

264.8(10.4)

141.

3(5

.6)

Detail T-Slot

12 (0.5

)20 (0.8

)

32 (1

.3)

30(1.2)

Detail T-Slot

T-SLOT DETAIL


30 (1.2)

12 (0

.5)

20 (0

.8)

32 (1

.2)


F500/50

30+

31

F4

00/5

00/6

50Ve

rtic

al M

achi

ning

Cen

ter

HYU

ND

AI W

IAM

ACH

INE

TOO

L

SPECIFICATIONS

F500 PLUS





unit : mm(in)

Through coolant

BT50/BBT50, BIG PLUS

1.5 (0.059)(BBT50) 35.4

(1.39)

25.7

(1.0

1)

Ø10

0 (Ø

3.93

)

Ø69

.85

(Ø2.

75)

Ø17

(Ø0.

66)

Ø23

(Ø0.

91)

60°

38(1.49)

23.2 (0.91)

10 (0.39)

45(1.77)

101.8 (4)

7/24

M24

35(1.37)

15(0.59)

45°

3 (0.11)(BT50) Ø6

(Ø0.

23)

60°

Ø6.2

(0.2

44)

Ø8 (0

.315

)

1BP8

1BP8

16 (0.63)

7 (0.276)

Ø63

(Ø2.

48″)

65.4 (2.57)

6(0.24)

27(1.06)

2 (0.08)

Ø44

.45

(Ø1.

75″)

35 (1.38)

29(1.14)

Ø15

(Ø0.

59)

60°

45°

16.6 (0.65)

7/24

M16

Ø10

(Ø0.

39)

10(0.39)

1 (0.04)(BBT40)

(BT40)

BT40/BBT40, BIG PLUS

22.6(0.88)

16.1

(0.6

3)

Ø4

(Ø0.

15)

Ø3

(Ø0.

11)

Ø5

(Ø0.

19)

11.5(0.45)3

(0.11)

P5

Through Coolant

F500/50 | F650/50

F400 | F500PLUS | F650PLUS

Tool Shank

SPECIFICATIONS





unit : mm(in)

(BCV40)

(CAT40)60°

45°

CAT40/BCV40

Ø63

.5 (2

.5)

15 (0

.59)

25(0.984)

25(0.984)

16.3

83(0

.645

)

68.25 (2.687)15.8 (0.625)

19.05 (0.75)

3.2 (0.125)

1 (0.04) 7/24

32.15(1.266)

5/8″-11

Ø44

.5 (1

.75) 16

.1(0

.63)

Ø4

(Ø0.

15)

Ø3

(Ø0.

11)

Ø5

(Ø0.

19)

11.5(0.45)3

(0.11)

P5

Through Coolant

Through coolant

CAT-50/BCV50

Ø6(Ø

0.23

)

60°

Ø6.2

(0.2

44)

Ø8 (0

.315

)

1BP8

1BP8

16 (0.63)

7 (0.276)

101.8 (4.000)

Ø69

.8(Ø

2.75

0)

Ø98

.4 (3

.875

)

19.05 (0.750)45

(1.772)

1.5 (0.059)(BCV50, BIG PLUS) 37.5

(1.478)35.1

(1.383)

25.8

(1.0

15)

1″-8UNC

7/24

23 (0

.906

)

60°3.2(0.125) (CAT50)

45°

F500/50 | F650/50

F400 | F500PLUS | F650PLUS

Tool Shank

32+

33

F4

00/5

00/6

50Ve

rtic

al M

achi

ning

Cen

ter

HYU

ND

AI W

IAM

ACH

INE

TOO

L

SPECIFICATIONS





Specifications [ ] : Option

SPECIFICATIONS

ITEM F400

TABLE

Table Size mm(in) 1,000×460 (39.4″×18.1″)

Maximum Load Capacity kg(lb) 600 (1,323)

Table Change Time sec -

Change Method - -

Table Driving Method - -

SPINDLE

Spindle Taper - NT #40

Spindle RPM r/min 8,000 [8,000] [12,000] [8,000] [8,000] [12,000]

Spindle Power Output (Max./Cont.) kW(HP)15/11 (20/14.7) [15/11 (20/14.7)] [11/7.5 (14.7/10)]

[13.5/9 (18.1/12)] [15.8/10.5 (21/14.1)] [15.8/10.5 (21/14.1)]

Spindle Torque (Max./Cont.) N・m(lbf・ft)95/70 (70/51.6) [95/70 (70/51.6)] [70/45 (51.6/33.2)][95/63 (70/46.5)] [95/63 (70/46.5)] [95/63 (70/46.5)]

Spindle Driving Method - DIRECT [BELT] [DIRECT] [BELT] [DIRECT] [DIRECT]

FEED

Travel (X/Y/Z) mm(in) 800/460/520 (31.5″/18.1″/20.5″)

Distance from Table Surface to SP mm(in) 130~650 (5.1″~25.6″)

Distance from Column to SP. center mm(in) 475 (18.7″)

Rapid Traverse Rate (X/Y/Z) m/min(ipm) 32/32/32 (1,260/1,260/1,260)

Slide Type - LM GUIDE

ATC

Number of Tools EA 24 [30]

Tool Shank - BT40 [BBT40]

Max. Tool Dia. (W.T / W.O) mm(in) Ø90/Ø150 (Ø3.5″/Ø5.9″)

Max. Tool Length mm(in) 300 (11.8″)

Max. Tool Weight kg(lb) 8 (17.6)

Tool Selection Method - RANDOM

Tool Change TimeT-T sec 1.3

C-C sec 3.6

TANkCAPACITY

Coolant Tank ℓ(gal) 300 (79.3)

Lubricating Tank ℓ(gal) 2 (0.5)

Hydraulic Tank ℓ(gal) 20 (5.3)

POWERSUPPLY

Air Consumption (0.5MPa) ℓ/min(gal) 250 (66)

Electric Power Supply KVA 20

Thickness of Power Cable Sq OvER 25

Voltage V/Hz 220/60 (200/50*)

MACHINE

Floor Space (L×W) mm(in) 2,450×2,100 (96.5″×82.7″)

Height mm(in) 2,833 (111.5″)

Weight kg(lb) 5,100 (11,244)

NC Controller - HW F i Series [F 32i-A] [S 828D]

*) Using 50Hz voltage instead of 60Hz may lower the output of motors. (excluding servo motors and inverter motors)Specifications are subject to change without notice for improvement.






34+

35

F4

00/5

00/6

50Ve

rtic

al M

achi

ning

Cen

ter

HYU

ND

AI W

IAM

ACH

INE

TOO

L

SPECIFICATIONS

ITEM F500PLUS F500/50

TABLE

Table Size mm(in) 1,200×500 (47.2″×19.7″)

Maximum Load Capacity kg(lb) 800 (1,764)


Change Method - -


SPINDLE

Spindle Taper - BIG PLUS #40 NT #50

Spindle RPM r/min 8,000 [10,000] [12,000] 6,000 [6,000]

Spindle Power Output (Max./Cont.) kW(HP)15/11 (20/14.7) [18.5/15 (24.8/20)]

[18.5/11 (24.8/14.7)] 15/11 (20/14.7) [27.8/18.5 (37.3/24.8)]

Spindle Torque (Max./Cont.) N・m(lbf・ft)286/143 (211/105.5) [117.7/95.4 (86.8/70.4)]

[117.7/70 (86.8/51.6)]358/179 (264/132)

[294/196 (216.8/144.6)]

Spindle Driving Method - BELT [BELT] [DIRECT] BELT [BELT]

FEED

Travel (X/Y/Z) mm(in) 1,060/510/635 (41.7″/20.1″/25″) 1,100/510/635 (43.3″/20.1″/25″)

Distance from Table Surface to SP mm(in) 150~785 (5.9″~30.9″)



Slide Type - ROLLER GUIDE

ATC

Number of Tools EA 30 24

Tool Shank - BBT40 BT50 [BBT50]

Max. Tool Dia. (W.T / W.O) mm(in) Ø80/Ø125 (Ø3.1″/Ø4.9″) Ø110/Ø200 (Ø4.3″/Ø7.9″)

Max. Tool Length mm(in) 300 (11.8″) 350 (13.8″)

Max. Tool Weight kg(lb) 8 (17.6) 15 (33.1)


Tool Change TimeT-T sec 1.3 3.8

C-C sec 3.7 5.9

TANkCAPACITY



Hydraulic Tank ℓ(gal) 15 (4)

POWERSUPPLY

Air Consumption (0.5MPa) ℓ/min(gal) 110 (29.1)


Thickness of Power Cable Sq OvER 25

Voltage V/Hz 220/60 (200/50*)

MACHINE

Floor Space (L×W) mm(in) 2,910×2,690 (114.6″×105.9″) 2,910×2,860 (114.6″×112.6″)

Height mm(in) 2,815 (110.8″) 3,021 (118.9″)

Weight kg(lb) 7,500 (16,976) 7,700 (16,976)

NC Controller - HW F i Series HW F i Series [F 32i-B] [S 828D]







SPECIFICATIONS

ITEM F650PLUS F650/50

TABLE

Table Size mm(in) 1,600×650 (63″×25.6″)

Maximum Load Capacity kg(lb) 1,300 (2,866)


Change Method - -


SPINDLE

Spindle Taper - BIG PLUS #40 NT #50

Spindle RPM r/min 8,000 [10,000] 6,000 [6,000]

Spindle Power Output (Max./Cont.) kW(HP)15/11 (20/14.7)

[18.5/15 (24.8/20)]15/11 (20/14.7)

[27.8/18.5 (37.3/24.8)]

Spindle Torque (Max./Cont.) N・m(lbf・ft)286/143 (211/105.5)

[117.7/95.3 (86.8/70.4)]358/179 (264/132)

[294/196 (216.8/144.6)]

Spindle Driving Method - BELT

FEED

Travel (X/Y/Z) mm(in) 1,400/660/635 (55.1″/26″/25″)

Distance from Table Surface to SP mm(in) 150 ~ 785 (5.9″~30.9″)



Slide Type - ROLLER GUIDE

ATC

Number of Tools EA 30 24

Tool Shank - BBT40 BT50 [BBT50]

Max. Tool Dia. (W.T / W.O) mm(in) Ø80/Ø125 (Ø3.1″/Ø4.9″) Ø110/Ø200 (Ø4.3″/Ø7.9″)

Max. Tool Length mm(in) 300 (11.8″) 350 (13.8″)

Max. Tool Weight kg(lb) 8 (17.6) 15 (33.1)


Tool Change TimeT-T sec 1.3 3.8

C-C sec 3.8 6

TANkCAPACITY



Hydraulic Tank ℓ(gal) - 15 (4)

POWERSUPPLY

Air Consumption (0.5MPa) ℓ/min(gal) 125 (33.0) 110 (29.1)


Thickness of Power Cable Sq OVER 25

Voltage V/Hz 220/60 (200/50*)

MACHINE

Floor Space (L×W) mm(in) 3,500×2,560 (137.8″×100.8″)

Height mm(in) 2,810 (110.6″) 2,871 (113″)

Weight kg(lb) 9,500 (20,944)

NC Controller - HW F i Series HW F i Series [F 32i-B] [S 828D]






SIEMENS 828D (F400 | F500/50 | F650/50)

CONTROLLER

36+

37

F4

00/5

00/6

50Ve

rtic

al M

achi

ning

Cen

ter

HYU

ND

AI W

IAM

ACH

INE

TOO

L

Control Function

Max. configuration of axis 5 axisMax. configuration of axis and spindle 6 axis (axis + spindle)Least Command/input 0.0001mm / 0.00001inchFeed FunctionFeedrate Override 0 - 120%Rapid Traverse Override F0, 5, 25/50, 100%Acceleration with jerk limitationProgrammable accelerationFollow-up modeMeasuring system 1 and 2, selectableSeparate path feed for corners and chamfersTravel to fixed stopSpindle FunctionsSpindle Override 50% - 120%Spindle OrientationSpindle Speed LimitationRigid TappingInterpolationsLinear interpolation axis Max 4 axisCircle via center point and end point Circle via interpolation point Helical interpolation

Universal interpolator NURBS (non-uniform rational B splines)

Advanced Surface High Speed, High Rigidity FunctionCompressor for 3-axis machiningTool FunctionTool Radius Comp.Zero Offset (G54, G55, G56, G57 ,G58, G59) 100 EAProgrammable Zero Offset3D Tool Radius CompensationTool managementDisplayCRT / MDI 10.4˝ Color LCDScreen saverManual OperationManual Handle/Jog FeedRepositionReference Approach Ref 1, 2 ApproachSpindle Control Start, Stop, Rev, Jog, Ort. Auto OperationSingle BlockFeed HoldOptional Block SkipMachine LockDry RunSimulation 2DDiagnosis FunctionAlarm displaySpindle Load Meter/RPM Meter (monitor)PLC status/LAD display

Programming Function

Part Program Storage Length 5MBProgram Name 23 digitsSubroutine Call Protection LevelAbsolute/incremental Command G90 - G91Scaling, ROTInch / Metric ConversionConversational Cycle ProgramBlock SearchVariable Program (Macro)Read / Write System VariableBackGround EditingMiscellaneous Functions M - CodeLable Skip Program Stop / End M00, M01, M02, M30Lookahead , Jerk Limitation Feed & Forward Control

150 Block

SIEMENS Program exe.Maximum number of tools/cuttings 256/512Number of levels for skip blocks 1Protection FunctionEmergency StopOver Travel Soft LimitContour MonitoringProgram ProtectionAutomation Support Fun.Actual Speed Display(Monitor)Tool Life Management (Time, Parts)Work Count Function (Internal)Language Function

Two Language switchable

(6EA)Chinese Traditional, Czech, Danish,Dutch, Finnish, Hungarian, Japanese,Korean, Polish, Russian, Swedish,Portuguese, Turkish

Data TransferRS 232C I/F / EthernetEthernetUSB Memory Stick & CF Card

OptionDRF offsetLoad and save of MDITeach-inNumber of levels for skip blocks 8 Simulation in 3D displayShop Turn Conversational ProgramTRACYLTRANSMIT

Figures in inch are converted from metric values.The SIEMENS controller specifications are subject to change based on the policy of company CNC supplying.





HYUNDAI WIA FANUC i Series

CONTROLLER

Controlled axis / Display / Accuracy Compensation

Controlled axis 3 axis (X, Y, Z)

Simultaneous controllable axis 3 axis(G00 & G01 : 3 axis, G02 & G03 : 2 axis)

Least input increment X, Y, Z축: 0.001 mm (0.0001″)Least command increment X, Y, Z축: 0.001 mm (0.0001″)Inch/Metric conversion G20 / G21Interlock Each axis / All axisMachine lock All axisEmergency stopStored stroke check 1 Over TrableStored stroke check 2Stored stroke check 3Follow-upServo off

Backlash compensation +/- 0~9999 pulse(rapid traverse & cutting feed)

Position switchStored pitch error compensationLCD/MDI 8.4″ color LCDOperationAutomatic operation (memory)MDI operationDNC operation Need DNC ProgramSearch function Sequence, ProgramProgram restartWrong operation preventionBuffer registerProgram check function Dry run, program checkSingle blockHandle interruptFeed functionsManual jog feed Rapid, Jog, handleManual handle feed-rate x1, x10, x100Feed command F code feedrate direct commandFeedrate override 0~200% (10% Unit)Jog feed 0~5,000 mm/min (197 ipm)Rapid traverse override F1, F25%, F50%, F100%Override cancel

Rapid traverse bell-shaped acceleration/deceleration

Auto corner override G62Program input & Interpolation functionsLabel SkipControl in/out

Nano Interpolation Positioning/Linear/Circular(G00/G01/G02/G03)

Exact stop mode/Exact stop G61 / G09Dwell G04, 0~9999.9999secHelical interpolationThreading/synchronous feed G33Manual reference point returnReference point return G28Reference point return check G272nd, 3rd, 4th Reference point return G30Program stop/end M00, M01 / M02, M30

Tape code EIA RS-244/ISO 840 (Automatic recognition)

Optional block skip 1 EAMax. programmable dimensions +/- 9999.9999 (+/- 8 digits)Program number O4 /N8Absolute/incremental command G90 / G91Decimal point inputPlane selection G17, G18, G19Work coordinate system setting G52~G59Work coordinate preset G50.3Additional work coordinate system G54.1 P1 ~P48 (48 pairs)Manual absolute "On" fixedProgrammable data input G10

Program input & Interpolation functions

Sub program call 10 folds nestedCustom macroAddition to custom macro common variables #100 ~ #199 , #500 ~ #999Cylinderical interpolation G02, G03Canned cycle G73, G74, G76, G80 ~ G89Optional chamfering/corner RSkip function G31High speed Skip functionAutomatic coordinate system settingCoordinate system rotation G68, G69Programmable mirror image G50.1, G51.1Single direction positioning G60External data input Tool offset, message, machine zero point shiftCylindrical interpolationAI advanced preview control G5.1 (20 Block look ahead)Polar coordinate command G15, G16Sub / Spindle functionsMiscellaneous function M3 digitsMiscellaneous function lockSpindle speed command S5 digits, binary outputSpindle speed override 50%~120% (10% unit)Spindle orientationRigid tappingTool functions / Tool compensationTool function Max. T8 digitsCutter compensation C G40~G42Tool length measurement Z Axis INPUT CTool length compensation G43, G44, G49Tool offset amount G45~G48 (+/- 6 digits)Tool offset pairs 400 pairsTool life managementData input / Output & Editing functionsReader/Puncher interface RS232CMemory card input/outputUSB input/outputEmbeded Ethernet 100MbpsPart program storage length 1280m (512 Kbyte)Registered programs 400 eaMemory lockBack ground editingExtended part program editing Copy, move, change of NC programSetting, display, diagnosisSelf-diagnosis functionHistory display Alarm & operator messageHelp functionRun hour/Parts count displayActual cutting feedrate displaySpindle/Servo setting screenMulti-language display Selection of 5 optional languageDynamic switching display languageLCD Screen Save Screen saver

OptionSub Axis Control 4, 5 Axiswo way pitch error compensationManual Guide 0i 8.4″ color LCDManual Guide i 10.4″ color LCD (Conversational Program)Dynamic graphic displayOptional block skip add 9 ea (Application can be limited)AI contour control(AICC) 40 Block look aheadAI contour control(AICC) Ⅱ 200 Block look aheadNano SmoothingTool Management FunctionProtection of data at 8 levelsData server 1GBFASTethernet 100 Mbps (Option board is required)Part program storage length Expand 5120m (2 Mbyte)

Figures in inch are converted from metric values.The FANUC controller specifications are subject to change based on the policy of company CNC supplying.





CONTROLLER

38+

39

F4

00/5

00/6

50Ve

rtic

al M

achi

ning

Cen

ter

HYU

ND

AI W

IAM

ACH

INE

TOO

L

FANUC 32i-A (F400)Axis control / Display unit

Controlled axis 3 axis (X, Y, Z)

Simultaneous controllable axis3 axis(G00 & G01 : 3 axis, G02 & G03 : 2 axis)

Least input increment X, Y, Z axis : 0.001mm (0.0001″)Least command increment X, Y, Z axis : 0.001mm (0.0001″) G20 / G21Inch / Metric conversion G20 / G21Interlock Each axis / All axisMachine lock All axisEmergency stopStored stroke check 1Mirror ImageFollow-upServo off

Backlash compensation+/- 0~9999 pulse(rapid traverse & cutting feed)

Position switchPitch error compensationLCD/MDI 10.4″ color LCDOperationAutomatic operation (memory)MDI operationResearch Function Sequence, ProgramProgram restartDry runSingle BlockBuffer registerMemory Card DNC operationFeed functionsManual jog feed Rapid, Jog, handleManual handle feed-rate x1, x10, x100Feed command F code feedrate direct commandFeedrate override 0~200% (10% Unit)Jog feed 0~5,000 mm/min (197 ipm)Rapid traverse override F0, F25%, F50%, F100%Override cancelRapid traverse bell-shaped acce/decelerationProgram input & Interpolation functionsLabel Skip

Interpolation functionPositioning/Linear/Circular(G00/G01/G02/G03)

Exact stop mode/Exact stop G61 / G09Control in/outDwellHelical interpolation G04, 0~9999.9999secThreading/synchronous feedManual reference point returnReference point returnReference point return check G282nd, Reference point return G27Program stop/end G30Tape code M00, M01 / M02, M30Optional block skip EIA / ISO (Automatic recognition)Max. programmable dimensions 1 eaProgram number +/- 9999.9999” (+/- 8digit)Sequence number O4 / N8 digitAbsolute/incremental commandDecimal point input G90 / G91Plane selection G17, G18, G19Work coordinate preset G52~G59Manual absolute “On” fixedProgrammable data input G10Sub program call 10 folds nested Custom macro

Program input & Interpolation functions

AI Contour Control(AICC) ICylinderical interpolationCanned cycleOptional chamfering/corner R G73, G74, G76, G80 ~ G89Skip functionAutomatic coordinate system setting G31Coordinate system rotationProgrammable mirror imageSub / Spindle functionsMiscellaneous function M3 digitMiscellaneous function lockSpindle speed command S5 digits, binary outputSpindle speed override 50% ~ 120% (10% Unit)Spindle orientationRigid tappingTool functions / Tool compensationTool function Max. T8 digitsCutter compensation C G40~G42Tool length compensation G43, G44, G49Tool offset pairs 64 PairTool life managementData input / Output & Editing functionsReader/Puncher interface RS232CMemory card input/outputEmbeded Ethernet 100 MbpsPart program storage length 320 m (128 Kbyte)Registered programs 125 eaMemory lockBack ground editingExtended part program editing Copy, move, change of NC programExtenal messageSetting, Display, DiagnosisSelf-diagnosis functionAlarm history display Alarm & MessageHelp functionRun hour/Parts count displayActual cutting feedrate displayGraphic displaySpindle/Servo setting screenOperation monitor screen Loadmeter LightSelection of 5 optional languageLCD Screen Save Screen saverAuto Data BackupManual Guide i Conversational Program

OptionSub Axis ControlAdditional work coordinate system 48 Pair / 300 PairAdditional custom micro change #100~#199, #500~#999Work coordinate CommandWork coordinate InterpolationCylinderical interpolationSingle direction positioning G60FAST ethernet 100 MbpsData server 1GBAI Contour Control II(AICC II)Additional optional blockskip 9 ea (Application can be limited)Handle interuptManual Handle Feed 3 unitProgram storage length 640m (256Kbyte) ~ 5120m (2Mbyte)Dynamic graphic displayProtection of data at 8 levelsTool monitoring function HWTM (Embeded FANUC Type)






CONTROLLER

FANUC 32i-BControlled axis / Display / Accuracy CompensationControl axes 3 axes (X, Y, Z) 4 axes (X, Y, Z, B)Simultaneously controlled axes 3 axes [Max. 4 axes]

Least setting UnitX, Y, Z axes : 0.001 mm (0.0001 inch) B axes : 1 deg [0.001] deg

Least input incrementX, Y, Z axes : 0.001 mm (0.0001 inch) B axes : 1 deg [0.001] deg

Inch / Metric conversion G20 / G21 High response vector controlInterlock All axes / Each axisMachine lock All axes

Backlash compensation ± 0 ~ 9999 pulses(Rapid traverse / Cutting feed)

Position switchLCD / MDI 10.4 inch color LCD Feedback Absolute motor feedback Stored stroke check 1 Over travel Stored pitch error compensationOperationAutomatic operation (Memory)MDI operationDNC operation Needed DNC software / CF cardProgram restartWrong operation prevention

Program check functionDry run, Program checkZ axes Machine lock, Stroek check before move

Single blockSearch function Program Number / Sequence Number Interpolation functionsNano interpolationPositioning G00 Linear interpolation G01 Cylinderical interpolation G02, G03 Exact stop mode Single : G09, Continuous : G61Dwell G04, 0 ~ 9999.9999 sec Skip G31

Reference position return1st reference : G282nd reference : G27Ref. position check : G30

Thread synchronous cutting G33 Helical interpolation Circular + Linear interpolation 2 axes(max.)Feed function / Acc. & Dec. control

Manual feed

Rapid traverseJog : 0~5,000mm/min (197 ipm)Manual handle : x1, x10, x100 pulsesReference position return

Cutting Feed command Direct input F codeFeedrate override 0 ~ 200% (10% Unit)Rapid traverse override F0% (F1%), F25%, F50%, F100% Override cancelFeed per minute G94 Feed per revolution G95

Look-ahead block40 Block200 Block (Mold)

Program inputTape Code EIA / ISO Optional block skip 1 ea Absolute / Incremental program G90 / G91 Program stop / end M00, M01 / M02, M30 Maximum command unit ± 999,999.999 mm (± 99,999.9999 inch)Plane selection X-Y : G17 / Z-X : G18 / Y-Z : G19Workpiece coordinate system G52, G53, 6 pairs (G54 ~ G59)Manual absolute Fixed ONProgrammable data input G10 Sub program call 10 folds nestedCustom macro #100 ~ #149, #500 ~ #549 G code system A Programmable mirror image G51.1, G50.1 G code preventing buffering G4.1 Including Chamfering / Corner RCanned cycle G73, G74, G76, G80 ~ G89 Coordinate rotation G68, G69

Auxiliary function / Spindle speed functionAuxiliary function M & 4 digitLevel-up M Code Multi / Bypass M codeSpindle speed command S & 5 digit , Binary outputSpindle override 0% ~ 150% (10% Unit)Spindle orientation M19 FSSB high speed rigid tappingTool function / Tool compensationTool function Max. T 8 digitTool life management 256 pairs ☆Tool offset pairs 64 pairsTool nose radius compensation G40, G41, G42 Tool nose length compensation G43, G44, G49 Tool offset memory C Tool length, diameter, abrasion(length, diameter)Tool length measurement Z axes Input CEditing functionPart program storage size 640m (256KB) No. of registerable programs 500 ea Program protectBackground editingExtended part program editing Copy, move and change of NC programMemory card program editData input / output & Interface

I/O interfaceRS 232C serial port, CF card, USB memoryEmbedded Ethernet interface

Screen hard copyExternal messageExternal key inputExternal workpiece number searchAutomatic data backupSetting, display and diagnosisSelf-diagnosis functionHistory display Alarm & Operator message & OperationRun hour / Parts count displayMaintenance informationActual cutting feedrate displayDisplay of spindle speed / T codeGraphic displayOperating monitor screen Spindle / Servo load etc.Power consumption monitoring Spindle & Servo Spindle / Servo setting screenMulti language display Support 20 languagesDisplay language switching Selection of 5 optional LanguagesLCD Screen Saver Screen saverProcessing select Speed/ridigity setting

OptionAdditional optional block skip 9 ea ☆Fast ethernet Needed option boardData server Needed option boardProtection of data at 8 levelsSub Spindle controlPolar coordinate command G15, G16Polar coordinate interpolation G12.1, G13.1Cylinderical interpolation G07.1 One-way positioning G60 Stored stroke check 2, 3Inverse-time feed G93 Scaling G50, G51 Manual guide i Conversational auto programHandle interruptManual handle feed 2/3 units

Additional custom macro variables#100~#199, #500~#999 #100~#199, #500~#999, #98000~#98499

Rigid tap ReturnTool management functionTool offset number Max. 400 pair Program storage capacity 512KB ~ 2MB Program registration number Max. 1000 ea Additional work coordinate 48 pair (G54.1 P1 ~ P48)

AICC Ⅱ200 block400 block ☆

[ ] : Option ☆ Needed technical consultation






40+

41

F4

00/5

00/6

50Ve

rtic

al M

achi

ning

Cen

ter

HYU

ND

AI W

IAM

ACH

INE

TOO

L

OVERSEAS OFFICES

GLOBAL NETWORK

Changwon Technical Center / R&D Center / Factory153, Jeongdong-ro, Seongsan-gu, Changwon-si, Gyeongsangnam-do, Korea (Zip Code : 51533)TEL : +82 55 280 9114 FAX : +82 55 282 9680

Uiwang Technical Center / R&D Center37, Cheoldobangmulgwan-ro, Uiwang-si, Gyeonggi-do, Korea (Zip Code : 16082)TEL : +82 31 596 8209 Fax : +82 55 210 9804

HEADqUARTER

HYUNDAI WIAMachine Tools America 265, Spring Lake Drive, Itasca, IL, 60143

TEL : +1 630 625 5600 FAX : +1 630 625 4733

Jiangsu HYUNDAI WIACompany No.6 Fenghuang Road, Fenghuang Town, Zhangjjagang City, Jiangsu province, China

TEL : +86 512 5672 6808FAX : +86 512 5671 6960

Chengdu Branch OfficeNO.508 Room, B Block, AFC Plaza, NO.88 Jiaozi Road, High-tech Zone, Chengdu, China

TEL : +86 028 8665 2985FAX : +86 028 8665 2985

HYUNDAI WIAMachine Tools Europe Kaiserleipromenade 5, 63067 Offenbach, Germany

TEL : +49 69271 472 701FAX : +49 69271 472 719

Hyundai WIA Machine Tools ChinaShanghai Branch Office1-3F, Bldg6, No.1535 Hongmei Road, Xuhui District, Shanghai, China

TEL : +86 021 6427 9885FAX : +86 021 6427 9890

qingdao Branch OfficeRoom 1207, Cai Fu Building, 182-6 Haier Middle Road, Qingdao, China

TEL : +86 532 8667 9334FAX : +86 532 8667 9338

Raunheim Service CenterRaunheim R&D CenterFrankfurter. 63, 65479 Raunheim, Germany

TEL : +49 6142 9256 111 FAX : +49 6142 9256 100

Beijing Branch OfficeFloor 14, Zhonghangji Plaza B, No.15 Ronghua South Road, BDA Dist., Daxing Dist., Beijing, China 100176

TEL : +86 010 8453 9850FAX : +86 010 8453 9853

Wuhan Office306-2, A Tower,Jiayu Gpmggian, No12 Chuangye Road, Economic Development Zone, Wuhan, Hubei, China

TEL : +86 027 5952 3256FAX : +86 027 5952 3256

Inida Branch Office#4/169, Rajiv Gandhi Salai, (OMR), Kandanchavadi, Chennai-600 096, Tamilnadu, IndiaTEL: +91-44-3290-1719

Guangzhou Branch OfficeRoom 311, Unit 1-3, POLY TAL TU WUN, Hanxi Avenue, Panyu District, Guangzhou, China

TEL : +86 020 8550 6595 FAX : +86 020 8550 6597

Chongqing OfficeRoom 951, #3, Jinrongcheng T3, Jiangbei, Chongqing, China

TEL : +86 23 6701 2970





F650 PLUS Movie

Head Office & Factory153, Jeongdong-ro, Seongsan-gu, Changwon-si, Gyeongsangnam-do Tel +82 55 280 9500

Overseas Sales Team16F, 37, Cheoldobangmulgwan-ro, Uiwang-si, Gyeonggi-do Tel +82 31 593 8173

HYUNDAI WIA Machine Tools America265 Spring Lake Drive,Itasca, IL, 60143 Tel +1 (630) 625 5600 Fax +1 (630) 625 4733

HYUNDAI WIA Machine Tools EuropeKaiserleipromenade 5, D-63067 Offenbach, Germany Tel +49 69271 472 701 Fax +49 69271 472 719

Inida Branch Office#4/169, Rajiv Gandhi Salai, (OMR), Kandanchavadi, Chennai-600 096, Tamilnadu, India Tel +91 44 3290 1719

http://machine.hyundai-wia.com

2016-11 003.003 ENG





f400/500/650 - hillary machinery...02f500plus basic features high speed & productivity vertical...

Documents