f1250 series 250-400 watts ac/dc switching open frame series.pdfelectrical specifications output...
TRANSCRIPT
ELECTRICAL SPECIFICATIONS
OUTPUT
Input range : Input Frequency : 47 - 440Hz
SAFETY STANDARD
sm61 : emit pu–dloH
DC OUTPUT & FEATURES
AC/DC Switching Open Frame
Inrush Current (25 C) 20A @ 110VAC; 40A @ 220VAC MAX
F1250 Series 250-400 Watts
SMP TECHNOLOGY, INC.227 Technology Circle, Scotts Valley, CA 95066Tel : (831) 440-9191 Fax : (831) 427-7570http : //www.smp-tech.com E-Mail : [email protected]
ENVIRONMENTALO pe r a tin g Te m pe r a tu r e o-15 ~ 50 C, AmbientO pe r a tin g H u m idity 5 ~ 95% RH, No CondensingS to r a g e Te m pe r a tu r e o-20 ~ 85 C, AmbientVi br a tio n 2G, 10~500Hz, 3 axes
90 ~ 264/200~370VDC
o
Short Protection: AutorecoveryOverload Protection: Automatic Power LimitedOver Voltage Protection: Autorecovery
DIMENSIONS : 194(L) x 114(W) x 38(H)mm
Outputs Can Be Modified From 3V~400VDC
EMC STANDARDS
UL 60950 Meet
CSA 60950 Meet
CE Marking
EN55022 CLAS S A EN61000 -3-2EN61000 -3-3 EN55024 (IEC 61000 -4-2,IEC 61000 -4-3, IEC 61000 -4-4IEC 61000 -4-5, IEC 61000 -4-6IEC 61000 -4-8, IEC 61000 -4-11)
NOTE : Each output can provide up to maximum load, but total load can not exceed rated output power.Line regulation is measured from low line to high line at rated load.Load regulation is measured from 20% to 100% of rated load at 110VAC input.Ripple & Noise is measured by using a 0.1uF/630V metalized capacitor & a 47uF electrolytic capacitor parallel on the test point, at rated load and 110VAC input.Efficiency is measured at rated load and 110VAC input.Hold-up time is measured at rated load and 110VAC input.400 watts series, fan cooling is necessary when operating over 250 watts
1.2.3.4.
5.6.7.
2 5 0 Wa t t ~ 4 0 0 Wa t t ( W i t h F a n C o o l in g)
V1: +12V ±10%
V1: +24V ±10%
0A
0A
33.3A
16.6A
150mVp-p
240mVp-p
±1%
±1%
±1%
±1%
80% Min.
82% Min.
15.0 ~ 18V
27.6 ~ 31V
V1: +15V ±10% 0A 26.6A 150mVp-p ±1% ±1% 80% Min. 20 ~ 24V16.6A
10.4AF1250-24C
F1250-12C
F1250-15C
F1250-48C V1: +48V ±10% 0A 8.3A 250mVp-p ±1% ±1% 83% Min. 54 ~ 60V5.2A
20.8A
MODE LMin. Max.R ated
L oad(C urrent) L ineR E G .
L oadR E G . E ffic ienc y O.V.P.
Trip point1
4 2 3 5
O/P VoltA dj. %±
R ipple&
Nois e7
Pin Sing le Description
1~ 6
G
V1G:DC Output Ground
TerminalVx: DC Output Terminal
(Specify at spec.)
Pin Input Description
LNeutral Terminal of AC Input
Line Terminal of AC Input
Input connector (Cn1)3.96mm crimp style connector5Pin 3.96mm.
No Polarity At DC Input
DC Output Connector (Cn2)
3.96mm crimp style connector
Single output:6Pin.3.96mm.
7~ 12
1 N2
MECHANICAL SPECIFICATIONAC/DC Switching Open Frame
SMP TECHNOLOGY, INC.227 Technology Circle, Scotts Valley, CA 95066Tel : (831) 440-9191 Fax : (831) 427-7570http : //www.smp-tech.com E-Mail : [email protected]
F1250 Series 250-400 Watts
CASE NO: F1250UNIT: mmDIMENSIONS:94(L)* x 114(W)* x 38(H)mm
mm
83
mm
41
1
194mm
1
2
3
67
12
12
3.5*4
+
5mm
5mm