f o r t e a c h e rs · 2020. 8. 28. · f o r t e a c h e rs equipment setup instructions for...
TRANSCRIPT
-
FOR TEACHERS
EQUIPMENT SETUP INSTRUCTIONS For inquiries contact [email protected]
1 - Remove from one of the microphones stands, the upper part, so you end up with the main shaft. 2 - Attach the iPad holder to the main shaft of the stand. 3 - Mount your iPad to the holder securely by adjusting it to the dimensions of your device. 4 - Connect the Lightning to VGA or HDMI adapter to the lightning port of your iPad. 5 - Wrap the VGA or HDMI cable around the main shaft of the stand, and connect it to the lightning adapter already attached to your iPad.
1
mailto:[email protected]
-
EQUIPMENT SETUP INSTRUCTIONS
6 - Connect the other end of the VGA or HDMI cable to your projector or TV 7 - Secure the iRig Pre to the main shaft of the stand 8 - Connect the mini-jack of the iRig to your iPad's headphone socket. 9 - Connect the mini-jack of the stereo audio cable to the headphone jack of the iRig Pre. 10 - Connect the other end of the stereo audio cable to the amplifier of choice 11 - Mount the handheld microphone to a separate microphone stand.
2
-
EQUIPMENT SETUP INSTRUCTIONS
12 - Wrap up the XLR Cable to the microphone stand and attach the female connector to the microphone. 13 - Connect the Male side of the XLR cable to the iRig pre. 14 - Turn on your the iRig, amplifier, and your TV or Projector 15 - Open the Yousician app on your iPad. 16 - In your TV or Projector, select the input that the iPad is connected to. The iPad should be displayed on your tv.
Now you are ready to start using Yousician with your students in your classroom!
3