extrusions
DESCRIPTION
extrusions, panel plusTRANSCRIPT
A-10
pgs. 10-63
A
Extrusions
Angle Mouldings
Corner Channel Mouldings
Divider (H-Shape)
Edgebanding
Baseboard Mouldings &
Carpet Extrusion
Capping (J-Shape)
Cove Mouldings
Dust Seal
Flat Trims
• Aluminum • Even Leg - pg. 46 • Uneven Leg - pg. 46• Plastic • Even Leg Clear (with & w/o adhesive) - pg. 44 • Even Leg Color (with & w/o adhesive) - pg. 45 • Even Leg Metallic (with & w/o adhesive) - pg. 44 • Uneven Leg Color (with & w/o adhesive) - pg. 45 • Uneven Leg Metallic (with & w/o adhesive) - pg. 44
• Automatic (without adhesives) • Color - pgs. 22, 24,-25 • Metallic - pg. 25 • Woodgrains - pgs. 24-25• Iron On • Colors - pg. 23 • Paintable - pg. 23 • Wood Veneer - pg. 23 • Peel & Stick • Colors - pgs. 22-23 • Metallic - pgs. 22,26 • Woodgrains - pgs. 22-23• Tools - pg. 21
• Aluminum - pg. 39• Color (with & without adhesive) - pg. 34• Plastic Clear (with & without adhesive) - pg. 38• Plastic Metallic Mylar Cover - pg. 32
• Aluminum - pg. 44• Stainless Steel - pg. 44
• Plastic Color - pg. 50
• Plastic (Clear & Color) with & without adhesive - pg. 49
• Aluminum: Half Round - pg. 42• Plastic / Metallic Flat & Half Round with Adhesives - pgs. 26-27
• Aluminum (60, 90, 135 degrees) - pg. 40• Plastic (clear & color) Joiner, 60º & 90º - pgs. 38, 41
• Aluminum - pg. 39• Color - pg. 35 • Plastic Clear - pg. 38• Metallic (Plastic) - pg. 37
A-11
Impact ProtectionSystem
Hinges
Tee Moulding
U Channels
Z-Bar
• Acrylic, Butt, Piano Hinges - See Section B• Flat Hinge (Color & Clear) - pg. 47• Plastic Panel (Color & Clear) - pg. 47 • Tee (Color) - pg. 47
• Aluminum - pg. 33• Color - pgs. 28-29• Flexible - pg. 31 • Metallic (Mylar) - pg. 32 • Plastic Clear - pg. 30• Plastic Nyla-Glide GR™- pg. 31 • Stainless Steel - pg. 32
• Aluminum - pg . 43 • Suspension Rail & Brackets - pg. 357• Plastic - pg. 120
• Cart Guard - pgs. 59-61 • Corner Guard - pgs. 53-54• Handrail - pgs. 57-58• Wall Guard - pgs. 54-56, 62
• Aluminum (Fillers, No Notch, Standard, Rippled & Angled) - pgs. 18-19 • Bumper • Double Lipped (Vinyl) - pgs. 17 • Flat Face (Vinyl) - pg. 15 • Half Round (Vinyl) - pg. 16 • Lazy Susan (Vinyl) - pg. 17 • Poly - pg. 15 • Single Lipped (Vinyl) - pg. 17 • Two Tone (Vinyl) Color & Metallic - pg. 18 • Waterfall Edge (6 mil) (Vinyl) - pg. 15 • Standard • Colors - pgs. 12-13 • Double Lipped - pg. 17 • Double Spline - pg. 17 • Filler Strip - pg. 18 • Flat Face Rigid - pg. 19 • Flexible - pg. 14 • Leatherette (Textured) - pg. 13 • Metallic - pg. 18 • Two Toned - pg. 18 • Woodgrains - pgs. 12-13 • Tools • Air Hammer - pg. 20 • Cutters & Clippers - pg. 21 • Edge Trimmers - pg. 20 • Moulding Blades - pg. 20 • Notching Tools - pg. 20 • Quick Drive Pneumatic Nailer - pg. 20
Sliding Door Trackpgs. 48-49
Also See Section F For More Options
Panel Retainers (Wood & Glass)
• Plastic (Color & Clear) Adjustable, Groove & Staple - pg. 51
Table Beading
pg. 62
A-12
STOCK COLORS:770 ALMOND 315 BROWN742 ANGOLA BROWN 248 CHAMOIS YELLOW**288 BEIGE 125 DOVE GRAY260 BLACK 236 FRESCA GREEN**131 BLUE 212 FOLKSTONE**386 BRONZE*** 253 GOLD***113 GREEN 579 TAN632 OPTI GRAY** 709 TAN175 PUTTY GRAY 614 TOY BLUE**324 RED 601 WHITE363 SILVER 895 YELLOW243 STORM GRAY**
**AVAILABLE IN 5/8”, 3/4” & 13/16” WIDTHS ONLYWOODGRAINS:
817P AMERICAN NAT. MAPLE 866P NATURAL OAK809P BOSTON CHERRY 747P TEAK
423 OAKNOTE: CHERRY IS AVAILABLE IN 3/4”,
13/16” & 1-1/4” ONLY
105-656- Fits 9/32”
105-318- Fits 3/8” 105-667- Fits 1/2” 105-668- Fits 9/16”
105-662- Fits 5/8” 105-677- Fits 11/16” 105-679- Fits 3/4”
105-2532- Fits 25/32” 105-658- Fits 13/16” 105-659- Fits 13/16” OFFSET
USES:S055
SLOTTER
USES:S065
SLOTTER
USES:S1/S7
SLOTTER
250 FT. COILS Sample Chains Available - Please Inquire.
NOTE: We can supply other colors - Minimums apply - please inquire.
(minimum)
(minimum)
(minimum)
Black, Brown & White
USES:S055
SLOTTER
USES:S065
SLOTTER
USES:S065
SLOTTER
USES:S1/S7
SLOTTER
USES:S1/S7
SLOTTER
USES:S1/S7
SLOTTER
USES:S1/S7
SLOTTER
*** 5000 ft. Minimum Apply
105-650- Fits 7/8” 105-651-
USES:S1/S7
SLOTTER
USES:S1/S7
SLOTTER
USES:S1/S7
SLOTTER
105-2732- Fits 27/32” Fits 1”
(minimum)
SEE PAGE 14 FOR TEE MOULDING TOOLS & BLADES
PHTHALATESFREE
FLEXIBLE POLYETHYLENE TEE MOULDING
A-13
250 FT. COILS Sample Chains Available - Please Inquire.
105-563- Fits 1-1/8” 105-564- Fits 1-1/8” OFFSET
105-544- Fits 1-1/4”OFFSET W/BEAD
(#747P Teak is non stock - 5000 foot minimum)USES:S1/S7
SLOTTER
USES:S1/S7
SLOTTER
USES:S1/S7
SLOTTER
105-1316- Fits 1-3/16” 105-543- Fits 1-1/4” 105-672- Fits 1-1/2”
USES:S1/S7
SLOTTER
USES:S1/S7
SLOTTER
USES:S1/S7
SLOTTER
250 FT. COILS - BLACK
NOTE: We can supply other colors, minimums may apply. Please inquire.
108-679-260 3/4”
USE S065 SLOTTER
108-658-260 13/16”
USE S1/S7 SLOTTER
108-543-260 1-1/4”
USE S1/S7 SLOTTER
108-650-260 7/8”
USE S1/S7 SLOTTER
LEATHERETTE
105-673- Fits 1-1/2” OFFSET
105-1058- Fits 1-5/8”
105-1916- Fits 1-9/16” 105-1917- Fits 1-9/16” OFFSET
105-1059- Fits 1-5/8” OFFSET
105-2000- Fits 2”
USES:S2/S8
SLOTTER
Black, Brown & WhiteBlack, Brown & White
Black, Brown & WhiteBlack, Brown & White Black & White
USES:S1/S7
SLOTTER
USES:S1/S7
SLOTTER
USES:S1/S7
SLOTTER
USES:S1/S7
SLOTTER
USES:S1/S7
SLOTTER
SEE PAGE 14 FOR TEE MOULDING TOOLS & BLADES
250 FT. 1000 FT.COLOR .43’ .35’
PHTHALATESFREE
FLEXIBLE POLYETHYLENE TEE MOULDING
FLEXIBLE EMBOSSED POLYETHYLENE TEE MOULDINGS
A-14
2487- 1/2”
250 FT. COILS
2488- 5/8” 2489- 11/16”
2491- 13/16” 2492- 1” 2493- 1-1/4” 2494- 1-1/2”
This flexible TEE MOULDING is manufactured from a soft, pliable vinyl which conforms to the contours of any product design with the highly flexible, bright finish surface and underside, it easily turns tight inside and outside corner radii.
250 FT. COILS 250 FT. COILS 250 FT. COILS
250 FT. COILS 250 FT. COILS 100 FT. COILS 100 FT. COILS
2490- 3/4”
2311- 7/16”
S4/10 SLOTTERPVC/FILM
12 FT. LENGTHS
S065-SLOTTERPVC/MYLAR
500 FT. COILS - SEMI-RIGID
5187- 1/4”3/16”2382-POL/B
PVC-FILMS1/S7 SLOTTER12 FT. LENGTHS
POLISHED BRASS - POLISHED CHROME
* Available in Stainless
Steel Finish
* Available in Stainless
Steel Finish
* Available in Stainless
Steel Finish
* Available in Stainless
Steel Finish
PART#NO. OF WINGS
SLOTTHICKNESS
S055 2 .055"S065 2 .065"
S1 2 .075"S2 2 .080"S3 2 3/32"S4 2 1/8"S5 2 3/16"S6 2 1/4"
5/16" Bore 1/4” Shank 1/2” Cut
PART#NO. OF WINGS
SLOTTHICKNESS
S7 4 .075"S8 4 .080"S9 4 3/32"S10 4 1/8"S11 4 3/16"S12 4 1/4"S13 4 .065"
Complete Set
PART#NO. OF WINGS
SLOTTHICKNESS
SJ-055 2 .055"SJ-065 2 .065"SJ-1 2 .075"SJ-2 2 .080"SJ-3 2 3/32"SJ-4 2 1/8"SJ-5 2 3/16"SJ-6 2 1/4"
PART#NO. OF WINGS
SLOTTHICKNESS
SJ-7 4 .075"SJ-8 4 .080"SJ-9 4 3/32"SJ-10 4 1/8"SJ-11 4 3/16"SJ-12 4 1/4"SJ-13 4 .065"
CARBIDE TIPPED TEE MOuLDING BLADES
Streamlining Wrap Around Metallic Shell with PVC Core - use S1 or S7 SlotterPOLISHED BRASS - POLISHED CHROME -
BRuSHED BRASS - BRuSHED CHROME - STAINLESS STEEL
Only Available in Polished Brass
4 Wing Blade2 Wing Blade ArborA1/B1 A1 Arbor w/Locknut & B1 Bearing w/Washer
2 Wing w/Arbor & Bearing 4 Wing w/Arbor & Bearing
FLEXIBLE METALLIC TEE MOULDINGS
A-15
Custom Colors Available Please Inquire304-812- 13/16” 304-1125- 1-1/8” 304-1250- 1-1/4”
ALSO AVAILABLE IN ALMONDS4 OR S10SLOTTER
S4 OR S10SLOTTER
INSTALLED
.600 REF.
1.2601.300
.165
.185
INSTALLED
.520 REF.
1.1301.160
.140
.150
INSTALLED
.450 REF.
.122
.132
.810
.835
S3 OR S9SLOTTER
PVC250 FT. COILS
WHITE, BLACK, DOVE GRAY &
BROWN
• MATTE PVC • BLACK
COLOR THRU AND THRU6 MILLIMETER
Unique Design Allows You To Trim From The Bottom While Keeping The Contoured Edge On Top.
Contoured Edge
110-100-BK 1”
307-750-BK 3/4” 307-812-BK 13/16” 307-1000-BK 1”
110-112-BK 1-1/8” 110-118-BK 1-3/16”
110-075-BK 3/4” 110-812-BK 13/16” 110-875-BK 7/8”
S4/S10 SLOTTER250 FT. COILS
S4/S10 SLOTTER250 FT. COILS
S4/S10 SLOTTER250 FT. COILS
S4/S10 SLOTTER100 FT. COILS
S3/S9 SLOTTER100 FT. COILS
S3/S9 SLOTTER100 FT. COILS
S3/S9 SLOTTER100 FT. COILS
S4/S10 SLOTTER100 FT. COILS
S4/S10 SLOTTER100 FT. COILS
5/16”15/32”
3/4”
1/8”
1/2”
9/64”
5/16”
13/16”
1/8”
1”
27/64” 17/64”PHTHALATESFREE
PHTHALATESFREE
POLY BUMPER
FLAT FACE BUMPER MOULDINGS
WATERFALL BUMPER TEE MOULDING
A-16
• PVC • COILS UPS SHIPPABLE • SELF HEALING
INSTALLED
.600 REF.
.9901.015
.160
.175
303-1000- 1”
S4/S10 SLOTTERWhite - Black - Brown - AlmondDove Grey - Slate Grey* - Silver
INSTALLED
.550 REF.
.880
.900
.150
.165
303-875- 7/8”
S4/S10 SLOTTERWhite - Black - Brown
303-812- 13/16”INSTALLED
.475 REF.
.805
.825
.124
.140
S3/S9 SLOTTERWhite - Black - Brown - AlmondDove Grey - Slate Grey - Silver
INSTALLED
.450 REF.
.740
.760
.113
.127
303-750- 3/4”
S2/S8 SLOTTERWhite - Black - Brown
S2/S8 SLOTTERWhite - Black - Brown
INSTALLED
.375 REF.
.685
.700
.135
.145
303-687- 11/16”
.350 REF.
INSTALLED
.125
.135
.625
.640
303-625- 5/8”
S2/S8 SLOTTERWhite - Black - Brown
S1/S7 SLOTTERWhite - Black - Brown
.265.515
.490
.510
.105
.115
303-575- 1/2”
1.7401.760
.437
.187
.734
303-1750- 1-3/4”
S4/10 SLOTTER-100 FT. COILSWhte - Black - Brown
.177
.197
1.5001.530
.437 .734
303-1500- 1-1/2”
S4/10 SLOTTER-100 FT. COILSWhite - Black - Brown
Dove Grey
303-1250- 1-1/4”
S4/S10 SLOTTER-250 FT. COILSWhite- Black - Brown - AlmondDove Grey - Slate Grey - Red
INSTALLED
.500 REF.
1.2401.270
.160
.170
303-576- 1/2”
.265.453
.105
.115
.490
.510
S1/S7 SLOTTERWhite - Black - Brown*
PVC 100 FOOT COILSS4/S10 SLOTTER
INSTALLED
.660 REF.
.170
.190
1.2351.265
303-1250-OK1-1/4”
WOOd GrAIN
STANDARD BUMPER MOULDINGS
A-17
GLOSSY DOVE GRAY, GLOSSY BLACK, GLOSSY ALMOND, GLOSSY YELLOW AND GLOSSY RED
GLOSSY BLACK • PVC/DUAL DUROMETER • HIGH PROFILE DESIGN • CAN MAKE 4”- 6” RADIUS
GLOSSY WHITE, GLOSSY BLACK, GLOSSY BROWN, GLOSSY ALMOND, GLOSSY DOVE GRAY, RED & BLUE
PROPOR3019DRT- Fits 11/16” & 3/4”
1-3/16”
3/16”
5/8”
5/8”
1/8”
5/8”
9/32”
1/16”
GLOSSY TOPCOLORS13/16”
302-812-BK/BK 13/16”
.425
.170
1.133
.140
GLOSSY TOPCOLORS.030
1.220
S4/S10 SLOTTER
302-1250-BK/BK 1-1/4”
.090
.460 REF.
.350 REF.
.160
.180
1.2301.270
303-1032- 1-1/4” 303-1038- 1-1/2”
.090
.525 REF.
.395
.425.170.185
1.4401.480
S3/S9SLOTTER
S4/S10 SLOTTER
250’ Coil 50’ Coil
50’ Coil50’ Coil
S4/S10 SLOTTER
S4/S10 SLOTTER
MIN. RADIUS 5”
50’ Coil
ANGLE BUMPER MOULDINGVINYL PVC - 125 FT. COILS
GLOSSY WHITE, BLACK & BROWNS4/S10 SLOTTER
.140
1.250
.625
.250310-1000- For 7/8” Board
521-812-260 (BK)521-812-601 (WH)
521-875-260 (BK)521-875-601 (WH)
13/16” 7/8”
250 FT. COILSPOLYETHYLENEBLACK or WHITES1/S7 SLOTTER
250 FT. COILSPOLYETHYLENEBLACK or WHITES2/S8 SLOTTER
STYRENE - BLACK - 6 Ft. lengthsS3/S9 SLOTTER
Use when attachingmouldings to routed
surfaces
R106-684-BK
308-1254-WH 1-1/2” 1.500
.125
.500
Available in WhiteS3 OR S9 SLOTTER
PVC Material50’ Rolls
GLOSSY BUMPER MOULDINGS
SPECIALTYBUMPER MOULDING
LIPPED TEE MOULDINGS
FLEXIBLE LAZY SUSAN MOULDINGDOUBLE SPLINE
A-18
1978- 1/4”
S055 SLOTTER
2025- 1/2”
S1 OR S7 SLOTTER
1928- 3/4”
S1 OR S7 SLOTTER
POLISHED BRASS - POLISHED CHROME • 12 FT. LENGTHS • RIGID• ABS/MYLAR • PROTECTIVE COVER • ABSOLUTELY WAVE AND DISTORTION FREE • AVAILABLE FROM STOCK
2198- 5/16”
S1 OR S7 SLOTTER
90212-BK/POLC 1”
OFFSET FOR 5/8” BOARD - USE S3 OR S9 SLOTTER BLACK W/POLISHED CHROME
250 FT. COILS - PVC
2376-BK 1-1/2”
12 FOOT LENGTHS GLOSSY BLACKS2 OR S8 SLOTTERHIGH GLOSS PVC
96782S- 3/4”
250 FOOT COILS USE S2 OR S8 SLOTTERBRITE BRASS W/BLACK SHOULDERS=(B/B)
BRITE CHROME W/BLACK SHOULDERS=(B/C)
9677S-B/C 5/8”
250 FOOT COILS USE S2 OR S8 SLOTTERBRITE CHROME W/BLACK SHOULDERS=(B/C)
2308-BK Nominal 11/16”
250 FT. COILS S2 OR S8 SLOTTER PVC FILM BRASS EDGES W/BLACK CENTER=BK
2340-BK 3/4”
250 FT. COILS PVC FILMS S2 OR S8BRASS EDGES W/BLACK CENTER=BK
ALU0365-P 3/4” ALU0395-P 1”ALU411- 1/2”12 FOOT LENGTHS
FINISH CHARTM Mill As extruded - may or may
not have “scratches”/die lines. Dull Finish.
P Polished- Mechanical Shiny / Mirror Finish.S Satin - Clear Anodized Dull, Matte Finish 120 Ft. Polished600 Ft. +
120 Ft. Polished600 Ft. +120 Ft. Mill Polished Satin600 Ft. +
2-TONE DESIGNER TEE MOULDING
ALUMINUM FILLERS
STRAIGHT EDGE METALLIC TEE MOULDING
A-19
12 FOOT LENGTHS
ALU1028- 3/4”
ALU1957- 1”ALU1029P- 13/16” ALU568P- 1-1/4” ALU968POS- 1-1/4”
FINISH CHARTM Mill As extruded - may or may
not have “scratches”/die lines. Dull Finish.
P Polished- Mechanical Shiny / Mirror Finish.S Satin - Clear Anodized Dull, Matte Finish
ALU369T- S 13/16”
ALU9680- 1-1/4”Rippled Face
ALU968N - 1-1/4”Rippled Face
ALU1029- 13/16”Rippled Face
ALU7777- 1-1/2”Rippled Face
0.750
0.100
0.813
0.100
S055 SLOTTER S065/S13 SLOTTER
S055 SLOTTER S055 SLOTTER S055 SLOTTER
S065/S13 SLOTTERS065/S13 SLOTTER
S065/S13 SLOTTER
S065/S13 SLOTTER S055 SLOTTER
New Technology Allows You To Shape And Form To A Variety Of Designs.A305-RF40N- 1-1/4”
Rippled FaceA305-RF48- 1-1/2”
Rippled Face
S055 SLOTTERS065/S13 SLOTTER
CenterBarb
Off-setBarb
Standard AluminumTee Will Not Form
A Bend Unless Notched.
The New “No Notch”Aluminum Makes
Forming Easy!
FINISH CHARTM Mill As extruded - may or may not have
“scratches”/die lines. Dull Finish.S Satin - Clear Anodized Dull, Matte Finish
1.000
0.100
MAXIMUM RADIUS
4”
MAXIMUM RADIUS
4”
REAL ALUMINUM TEE MOULDINGS
“NO NOTCH” ALUMINUM TEE MOULDING
A-20
HAnd Held AIR HAMMeRS
edGe TRIMMeR 101
FlUSH TRIMMeR
•OVER1000BLOWSPERMINUTE.•NOSWINGING.• Canbeusedanywherethesmallesthandcanreach.Replaceswidevarietyofcumbersomehammersandmallets.Noskilledpersonnel.
• CONTROL.Asinglehammerbloworexcessof1000blowsperminute.Adjustablefromslightesthammertaptoheavyimpactblows.
• VERSATILE.Easilyinterchangeablehammertipsofsupersofthardplastic, steelandaluminum.•PALMSIZE-LIGHTWEIGHT-SAFE.
AUTOMATICALLY HAMMERS COMMON NAILS INTO WORK PLACE. IDEAL FOR TIGHT CORNERS.
HAMMER TIPT-15SS (SuperSoftPlastic) RedT-15S (SoftPlastic) BlueT-15M (MediumPlastic) BlackT-15H (HardPlastic) YellowT-15Al (Aluminum)T-15ST (Steel)
PART#nO. OF WInGS
SlOTTHICKneSS
S055 2 .055"S065 2 .065"S1 2 .075"S2 2 .080"S3 2 3/32"S4 2 1/8"S5 2 3/16"S6 2 1/4"
PART#nO. OF WInGS
SlOTTHICKneSS
S7 4 .075"S8 4 .080"S9 4 3/32"S10 4 1/8"S11 4 3/16"S12 4 1/4"S13 4 .065"
Complete Set
PART#nO. OF WInGS
SlOTTHICKneSS
SJ-055 2 .055"SJ-065 2 .065"SJ-1 2 .075"SJ-2 2 .080"SJ-3 2 3/32"SJ-4 2 1/8"SJ-5 2 3/16"SJ-6 2 1/4"
PART#nO. OF WInGS
SlOTTHICKneSS
SJ-7 4 .075"SJ-8 4 .080"SJ-9 4 3/32"SJ-10 4 1/8"SJ-11 4 3/16"SJ-12 4 1/4"SJ-13 4 .065"
QUICK dRIVe nAIleR
•Operatingpressure-80-125PSI.•Airconsumption-2-4CFM.•Drives3dthrough12"spikeswithproper guideselection.•Maximumnailheaddiameter-27/64"•Pennysize:8-20•Triggerless/safe.•Weight:2.5lbs.
ThisallmetalhandtoolfeaturesaprecisehighcarbonsteelcuttingbladethattrimsexcessmaterialfromtheedgeoftheT-moldingface,creatingasmoothflushtableorcountersurface.Theuniquecircularbladecanberotatedtoexposeanewsharpcuttingsurface.Thisfeatureeliminatestheneedforfrequentsharpening.Heavycastaluminumhousingwithballbearingrollerguidesfacilitateseasyoperation.
THE-QUALITYHSSBLADE(3mmthick,18%tungsten)hastwocuttingedgesand,therefore,operatesbothforwardsandbackwardsandeffortlesslycutsoffallprojectinglippingsneatlyandcompletelyflush-whentheadditional jawsareusedwithachamferof300or450.Thechamferisadjust-ableaccordingtothespacingbetweentheadditionaljaws.Suppliedwith a built-in blade and additional jaws 450mounted, a pair of additional jaws300 andon fence forplaneparallelcutting--thelatterforPVCandveneeredges.
With fence for veneer edge & PVC lippings
With additional jaws 45° or 30° for plastic lippings
Themostimportant"quarterinch"inmiteringisthatsmallportionofthebarbwhichisremovedbythenotchingtool.Thisspecial"V"cutenablesthemouldingtonegotiatesmallradiiandsharpcornersforaclean,smoothinstallation.
101-TRIMMeR 101XTRA-BlAde (X-Blade)
992006-000-0000 992007-000-0000 (X-Blade)
dAnAIR HAnd Held HAMMeRAH15 (Supplied w/standard blue tip)
IMPORTed HAnd Held HAMMeRAH25 (Supplied w/standard blue tip)
AS-319 STROKe COnTROl SPACeR(available as optional accessory)SHORTenS STROKe BY 1/4" RedUCeS HAMMeRInG FORCe
AS-OK-15 RePAIR KIT INCLUDES:
1-ALL-O-RINGS1-AS-ORL-O-RINGSLUBE
1-163BUMPER
Rn16-30M(With Magnetic Tip)
leATHeR TOOl GlOVe FOR AH15 OR AH25 HAMMeR
AS-706
4 Wing Blade
2 Wing Blade
ArborA1/B1...Complete SetA1 Arbor w/Locknut & B1 Bearing w/Washer•5/16"Bore•1/4”Shank•1/2”Cut
2 Wing w/Arbor & Bearing
4 Wing w/Arbor & Bearing
PART# deSCRIPTIOnPUnCH
THICKneSS
P900R VinylTeeMouldingNotcher-cuts1/4"radius 0.156"
1870A ReplacementBlade -P900A Aluminum&VinylNotcher
with1/16"opening 0.050"1840A ReplacementBlade(A-Notch) -P900V ChannelandAngleNotcher
with3/32"opening 0.090"848A ReplacementBlade -
RePlACeMenT PARTSPART # deSCRIPTIOnT-15SS HammerTipT-15S HammerTipT-15M HammerTipT-15H HammerTip
T-15Al HammerTipT-15ST HammerTip
159 Stem4-212 "O"Ring163 Bumper
3-127 "O"Ring158 Valve
3-114 "O"Ring4-218 "O"Ring157 Cap
2-031 "O"Ring161 ExhaustSeat162 Plug156 Housing
CARBIDE TIPPED TEE MOULDING BLADES
NOTCHING TOOLS
TEE MOULDING TOOLS
PNEUMATIC TOOLS
A-21
HAnd Held edgebAnding ApplicAtor
The H40 Edgemate Applicator is hand held and perfect for smaller jobs. It has an adjustable thermostat - from 250o - 450o. Heating element is also available.
•Attachestomostsubstratesfrom1/2”toover3”wide.•Anti-skidpadsonjawsallowittobeusedonfinishedsurfaces.•Softplasticheadonthepressurehandlewillnotdamagetheedge.•Canbeusedonconcave&convexrounds,compound&complex angles&straightedges.
deliVerS QUicK cleAn cUtS
plastic tubing - rubber - Weather Stripping
rope - twine - leather - plants/Shrubs - crafts - Wood trim - carpeting - linoleum - Auto trim - Auto belts & Hoses - nylon and much more!
•Replacementstainlesssteelblades (previously carbon)•Newconvenientbladestorageinthehandle
blade tray slips into handle for storage of extrablades.•Nowavailablein2sizes:2-1/2"&3-7/8".•Newreplacementkitcontains3stainlesssteelbladesand1anvil:completewith storage tray.
REPLACEMENT PARTS AVAILABLE:
WitH 5 intercHAngeAble AnVilS in A conVenient StorAge cASe
Miter AnVilFor mitering at multiple angles.
Single rAdiUS AnVil
For1”dia.material.
For 90° angles. doUble rAdiUS AnVil
For5/8”and3/4”dia.material.
•Heavydutyforgedsteelblade forextratoughmaterials.•Ergonomichandle for comfortable use.•Lightweightdiecast aluminum anvils.
FlAt AnVilFor straight and
flatcuts.
12 3
For banding pre-glued edges on PVC, polyester, melamine and veneer. It can band both straight and shaped work pieces. Through special design of an adjustable clamp high precision work and reliability are ensured. Guillotine knife for end trimming and roll-holder included as standard equipment.
edge triMMerDouble edge trimmer. Cuts both sides simultaneously, finishing operations. For edges up to 40mm. For larger edges it can be used as two independent edge trimmers. Top quality long life blades which are easy to replace once worn.
end triMMerManual end trimmer. It allows a perfect, clean and high quality cut on all the corners of the board. No other finishing operations are needed. Equipped with double sided blades.
indispensable tools For A perfect
edgebanding & Finishing
of pre-glued edges.
MAnUAl edge bAnder
SPECIFICATIONS:•DoubleInsulation•Max.BandingWidth-50mm•Temperature-300°C(570°F)to525°C(1000°F)•AirDelivery-400/min.•InputPower-115/230V,50-60Hz.•Weight-2,7Kgs
Manual edgebander, end trimmer & edge trimmer
2
31
MAxi-edge clAMp
H40pArt #
Mx-clAM
Replacement Kits: cl46-25rK cl46rK
cl46-25...2-1/2" clippercl46...3-7/8" clipper
Miter AnVilct-MA
Single rAdiUS AnVilct-SrA
rigHt Angle AnVilct-rAA
doUble rAdiUS AnVilct-drA
FlAt AnVilct-FA
blAdect-bld
ct-2000
ebS-980ebS-980-xblAde (replacement blade)
ebS-930ebS-930-rb
(replacement blade)
ebS-210...
ebS-210-rb...(replacement blade)
Special Savingsbuy All 3 toolsFor one pricepart # ebS-Set
CL46 CLIPPERMULTIPURPOSE CUTTER
EDGEBANDING TOOLS
A-22
Custom colors & sizes available.
Minimums apply. Inquire for quote.
GENERIC COLORS
• 3MM thickness. • sMooth surface. • 328’ coils.
• .018 thickness. • textured surface. • 600’ coils.
• 2MM thickness. • sMooth surface. • 328’ coils.
PROduCt FEatuRES:• Just peel and stick it.• Bond increases in strength with time.• 70 standard colors in durable PVC &
Real wood veneers.• 50’, 250’, & 600 foot rolls.• 3/4” & 15/16 widths, .020 thickness.• Custom colors available for
1 roll minimum.
PVC
SeleCt CheRRy(sc)
MediuM CheRRy (Mc)
BouRBon CheRRy (Bc)
Golden CheRRy (Gc)
daRk CheRRy(dc)
heRitaGe CheRRy (ht)
autuMn CheRRy(ac)
FuJi CheRRy(fc)
Red MahoGany(rM)
daRk RedMahoGany (dM)
PReSidential Walnut (PW)
iMPeRial Walnut (iW)
MahoGany on Walnut (MW)
knotty Pine(kP)
BeeCh(Be)
FiniShed MdF(Mdf)
BRuShed BRaSS (Br)
PoliShed BRaSS(PBr)
BRuShed ChRoMe (Bchr)
PoliShed ChRoMe(Pchr)
RoSeWood oak (sd)
MediuM oak(Md)
liGht oak(lo)
haRdRoCkMaPle (hM)
ManitoBa MaPle (MM)
White WaShed MaPle (WM)
liGht MaPle(lM)CleaR MaPle(cM)
aMeRiCan MaPle (aM)
natuRal CheRRy (nc)
antique White (aW)
alMond (al)
BlaCk (Bk)
FoG GRay(dG)
FolkStone GRay (lG)
natuRal oak(no)
Golden oak(Go)
RenaiSSanCe oak (rn)
PiCkled oak(Po)White (Wh)
CheRRy(ch)
Red oak(ro)
White oak(Wo)
MaPle(MP)
Walnut(Wa)
Unfinished
Red oak(fro)
White oak(fWo)
MaPle(fMP)
CheRRy(fch)
Walnut(fWa)
BiRCh(fB)
Pre-finished
For more Unfinished and Pre-finished colors, please go to Page 264.
(Solids, Woodgrains and Metallics)
(Real Wood)
(Real Wood)
* Metallic finishes are 500 ft. rolls
Part # Width finish forMica Wilsonart Pionite neVaMarPVc3MM-Bk 15/16” Black 909 1595 Se101 S-6-1PVc3MM-al 15/16” almond 920 d-30 St655 X
Part # Width finish forMica Wilsonart Pionite neVaMarPVc875-Wh 7/8” White 949 X SW811 XPVc875-Bk 7/8” Black 909 1595 Se101 S-6-1PVc875-al 7/8” almond 920 d-30 St655 X
PVc1516-Wh 15/16” White 949 1573 SW811 XPVc1516-Bk 15/16” Black 909 1595 Se101 S-6-1PVc1516-al 15/16” almond 920 d-30 St655 X
Part # Width finish forMica Wilsonart Pionite neVaMarPVc2MM-Bk 15/16” Black 909 1595 Se101 S-6-1PVc2MM-al 15/16” almond 920 d-30 St655 X
Part # descriPtionfesP-34- 3/4” PVC Solid Fast edgefeWP-34- 3/4” PVC Wood Grain Fast edgefesW-34- 3/4” PVC unfinished Wood Fast edgefePW-34- 3/4” Finished Wood Fast edgefeMe-34- 3/4” Metallic PVC Fast edge
fesP-1516- 15/16” PVC Solid Fast edgefeWP-1516- 15/16” PVC Wood Grain Fast edgefesW-1516- 15/16” unfinished Wood Fast edgefePW-1516- 15/16” Finished Wood Fast edgefeMe-1516- 15/16” Metallic PVC Fast edge
PVC TAPES
A-23
• BUTT JOINT • PRE-SANDED • STAINABLE • NO TOOLS NEEDED• CONTINUOUS 250 FT. COILS • WORKS WITH MOST FOAM BOARD EDGES
COLORSBlack=BK, Frost White=WH,
Almond=AL
REAL WOOD VENEERRed Oak=RD White Oak=WO
White Birch=WB Cherry=CH
• FINGER JOINTED, CONTINUOUS ROLLS
• FINE SANDED • STAINABLE
13/16” PRE GLUED TAPE250 FT. ROLLS
7/8” FLEECE BACKED TAPE500 FT. COILS
NOTE: OTHER SIZES AND WOOD SPECIES ARE AVAILABLE. PLEASE INQUIRE FOR DETAILS
ON YOUR REQUIREMENTS.
250 FT. MINIMUM ORDER
Stocked in White, Black and AlmondPOLYESTER
Other Species Available Please inquire 5000 ft. min
REAL WOOD VENEER
POLYESTER EDGE BANDING IN COLOR REAL WOOD VENEER EDGE BANDING
Stocked in Red Oak, White Oak and White Birch
WITH PEEL & STICK ADHESIVE BACKING
PART # WOOD SPECIESCT875CH CherryCT875HM Honduras MahoganyCT875MP MapleCT875RO Red Oak
CT875WAL WalnutCT875WA White AshCT875WB White BirchCT875WO White Oak
PART # SIZEIOC625- 5/8”IOC687- 11/16”IOC750- 3/4”IOC812- 13/16”IOC875- 7/8”IOC100- 1”IOC1125- 1-1/8”IOC1250- 1-1/4”IOC150- 1-1/2”
PART # SIZEIOV625- 5/8”IOV687- 11/16”IOV750- 3/4”IOV812- 13/16”IOV875- 7/8”IOV100- 1”IOV1125- 1-1/8”IOV1250- 1-1/4”IOV150- 1-1/2”
PART # WIDTHPE-500* 1/2”PE-625* 5/8”PE-750* 3/4”PE-812* 13/16”PE-1000* 1”PE-1500* 1-1/2”
PART # WIDTHVE-500* 1/2”VE-625* 5/8”VE-750* 3/4”VE-812* 13/16”VE-1000* 1”VE-1500* 1-1/2”
PART # WOOD SPECIESCT812CH CherryCT812HM Honduras MahoganyCT812MP MapleCT812RO Red Oak
CT812WAL WalnutCT812WA White AshCT812WB White BirchCT812WO White Oak
EDGEBANDING
PRE-GLUED IRON ON TAPES
STANDARD WOOD VENEER EDGING
A-24
Introducing A Complete Line Of Rehau EdgebandingWe Can Match Virtually Any Laminate Color Call Us Today
THIN EDGEBAND
SPECTRAEDGE ®
FLEXEDGE ®
This edgebanding is ideal for thinner panels in a variety of sizes and colors at an affordable price.
Comprised of durable impact resistant and rigid PVC. This edging is ideal for high traffic areas and has superior machinability for easier processing.
This is a durable impact resistant semi-rigid edge band, handles a radius as small as 12MM without extra pressure or excess adhesive. The flexible 3MM material trims easily and is ideal for use with contour edgebanders.
Available In Width Sizes:5/8”, 3/4”, 7/8”, 15/16”, 1-5/16”
Available In Width Sizes:15/16” & 1-5/16”
Available In Width Sizes:15/16” & 1-5/16”
Thickness: 1MM, 2MM, & 3MM
Thickness: 3MM
Thickness: .018 & .020
Sold In 600’ Coils
(1MM) Sold in 600’ Coils**Only Available 15/16” Width**
(2MM and 3MM) Sold In 300’
Solid In 300’ Coils
COLORGeneric Colors
Solid ColorsWoodgrains
COLORGeneric Colors
Solid ColorsWoodgrains
COLORSolid ColorWoodgrains
REHAU EDGEBANDINGNEW!
A-25
ECO STYLE ™ ABS EDGEBAND
Visions™ Glass Like
Magic Metallic
ABS is chlorine - free both in its manufacture and in the final product. Unlike PVC, ABS may be incinerated with general waste. Additionally, this thermoplastic material is impact and temperature resistant, lighter in weight and highly heat resistant. Material is produced in our North American facility according to ISO 14001 environmental standards.
Glass is synonymous with clarity, light and openness, with visions™ edgebandit achieves the unique appearance of real glass using lightweight, robust polymer. We create theillusion of depth by applying a decorative print to the underside of transparent PMMAmaterial. When this material is radiused or beveled, it diffuses light in the same way as real glass. By combining vision edgeband with matching boards or laminates, you can achieve the appearance of a real sheet of glass.
Using various combination of genuine aluminum edgeband and polymers, Magic™ Metallicedgeband achieves the look and feel of metal banding without its processing drawbacks. The magic collection, offered in aluminum and stainless steel finishes, includes metallic surface,translucent and magic creativo™, a twin level solid or printed surface with metallic overlay.
Available Colors: White, Mint, Sky Blue, Ice Blue
Many more colors and sizes available. We can match virtually and laminate color, call us today!
Sold In 600’ Coils,Except 3MM Which Is 300’ Coils
Sold in 328’ Coils
Solid In 492’ Coils
Introducing A Complete Line Of Rehau EdgebandingWe Can Match Virtually Any Laminate Color Call Us Today
Available In Width Sizes:15/16” & 1-5/16”
Thickness: .018, .020 & 3MM
COLORSolid ColorsWoodgrains
Sizes23MM x 2MM45MM x 2MM
COLOR22MM x 1.5MM28MM x 1.5MM43MM x 1.5MM
REHAU EDGEBANDINGNEW!
A-26
•MATERIAL:Depositsofmetallizedplasticwithadurablelacqueredfinish,laminatedtoaTHERMOPLASTICBACKER•PROTECTIVECOVER•Canbesawed,cutorroutedwithoutdelamination•CLEAN,FINISHEDEDGESWITHOUTFILING•Canbeusedforsilkscreening•Saveslabor•Scratchresistant•Eliminatesjointsandseams
.610
.625
.1751/2” TAPE
.740
.710.110.090
PROTECTIVE FILM
POLISHED BRASS & POLISHED CHROMEUse tee style moulding on doors, but when looking to match the drawer fronts,
use stick on trim to reposition allowing for straight seamless lines.
2782- 3/4”5185-B/B 5/8”5185-B/C
OnlyAvailableinBriteBrass&BriteChrome
PVC/Film/Tape100&500Ft.Coils
PolishedBrassPolishedChromePVC/Film/Tape250Ft.Coils
Matching 4’ x 8’ sheets are available See pages 674-675
Additional Colors/Finishes & Widths are available - please call with your inquiry
Highest QualityMetallic
Trim
.240
.260
.100
.120
.330
.350.075.095
PolishedBrassPolishedChromePVC/Film/Tape
100FT.Coils-Flexible
CFWW250- 1/4”2301- 1/4”
2004- 3/8” Light
PolishedBrassPolishedChromePVC/Film/tape
100FT.Coils-Flexible
1/4”
1/8”Black
BriteBrassBriteChrome
Vinylw/Adhesive100FT.COILS
.250
.280
.390
.420
PolishedBrassPVC/Film/Tape12Ft.Lengths
2018-POL/B 7/16” LIGHT
NOTE: ET TRIMS ARE PRIMED FOR USE W / A U T O M AT I C E D G E B A N D E R EXCEPT GLOSS BLACK
*
DESIGNED FOR ALL TRIM APPLICATIONS• Displays • Furniture • Nightclubs • Store Fixtures • Commercial & Residential
FINISHES AVAILABLE:PolishedBrass•PolishedChrome•BrushedBrass•BrushedChrome•GlossBlack*
CUT PROGRAMS1. STANDARD CUT- Rough cut to allow for small parcel shipping.2. CUT TO SIZE - Achieves a higher tolerance.
See page 9 for details
PROTECTIVE COVER
WITH OR WITHOUT
SELF-ADHESIVE BACKING
250FT.COILNTPTRIM(With Adhesive).024Thickness
PART # SIZENTP-25- 1/4”NTP-50- 1/2”NTP-75- 3/4”NTP-875- 7/8”NTP1516- 15/16”
NTP-1- 1”NTP-1-25- 1-1/4”NTP-1-50- 1-1/2”
NTP-2- 2”NTP-3- 3”NTP-6- 6”NTP-24- 24”
500FT.COILNTPTRIM (Primed/No Adhesive).020Thickness
PART # SIZEET-50- 1/2”ET-75- 3/4”ET-875- 7/8”
ET-1- 1”ET-1-25- 1-1/4”ET-1-50- 1-1/2”
ET-2- 2”ET-3- 3”ET-6- 6”
ET-24- 24”
HALF-ROUND DECORATIVE TRIMS
METAL LIKE TRIMS
A-27
2525- 1/4”
250 FT. COILSPolished Brass - Polished Chrome
ABS/Film with Adhesive Tape
.187 TAPE
.235
.265
.040
5082- 3/8”
100 & 500 FT. COILSPolished Brass - Polished Chrome
ABS/Film with Adhesive Tape
1/4” FOAM ADHESIVE TAPE
MYLAR LAMINATEWITH PROTECTIVE FILM
.360
.390
.045
.055
1857- 1/2”
.490
.510.025.035
2179- 5/8”
.615
.635 .080.090
2426- 3/4”
.020
.025
.730
.770
2427- 1”
.020
.025
.9801.020
2428- 1-1/4”
.020
.025
1.2301.270
2429-POL/B 1-1/2”
.020
.025
1.4801.520
2430- 2”
.020
.025
1.9802.020
100 FT. COILSPolished Brass - Polished Chrome
ABS/Film with Adhesive Tape
12 FT. LENGTHSPolished Brass - Polished Chrome
ABS/Film with Adhesive Tape
100 FT. COILSPolished Brass - Polished Chrome
ABS/Film with Adhesive Tape
100 FT. COILSPolished Brass - Polished Chrome
ABS/Film with Adhesive Tape
100 FT. COILSPolished Brass - Polished Chrome
ABS/Film with Adhesive Tape
100 FT. COILSPolished Brass
ABS/Film with Adhesive Tape
100 FT. COILSPolished Brass - Polished Chrome
ABS/Film with Adhesive Tape
6107-
100 &500 FT. COILS Brass Edges
All Polished Brass All Polished Chrome
1/2” FOAM TAPE
.740
.760
.090
.100
3/4” 2190-
12 FT. LENGTHSPolished Brass - Polished Chrome
ABS/Film with Adhesive Tape
.240
.260
.625
.640
.765
.795
1/2” TAPE.040.050
3/4”
2525
2179
Multi Purpose Cutter Available
CT-2000
FLAT DECORATIVE TRIMS
A-28
1/2”3/64”
27/64”
1/4”
19/64”
3/8”
9/16”3/32”
5/32”
3/16”
7/32” 1/32”
3/32”
1/8”
3/16” 1/32”3/4”
3/16”
132- Fits Up To 1/8” 130- Fits Up To 1/8” R104-581- Fits 1/8”
White - BlackMaterial: Styrene
12 Ft. Lengths
Material: Color/StyreneWhite - Black
8 & 10 Ft. Lengths
White - BlackMaterial: Styrene
8 & 10 Ft. LengthsR104-582- Fits 3/16”
White - Black - BrownMaterial: Styrene
12 Ft. Lengths
106-4808 Fits 1/8”
White - BlackMaterial: PVC
8 Ft. Lengths
R104-589- Fits 3/8”
White - Black - BrownMaterial: Styrene
12 Ft. Lengths121- Fits 1/2”
12 Ft. Lengths
Material: Color/Styrene-Silver PVC
White - Black- Brown- Beige - Silver
3/16”
1/2”
7/16”
w/Adhesive1/2”
.100
.150
142F- Fits 3/16”
White - Black Material: Styrolux
.488”
.075”
.190”7/32”
5/16”
3/16”
3/64”
R104-744- Fits 7/32”
White - Black - BrownMaterial: Styrene
12 Ft. Lengths2326-BK (High Gloss Black)
ABS/Film Material12 Ft. Lengths
.500
.530
.145
.165
.210
.230
.485
.515
FILM
Fits 5/32” High Gloss
Film
12 Ft. Lengths
5/32”
1/4”
3/8” 3/64”
R104-588- Fits 1/4”
White - BlackMaterial: Styrene
12 Ft. LengthsR104-4016- Fits 5/16”
12 Ft. Lengths
5/16”
11/16”
9/32”
3/64”
White - BlackMaterial: Styrene
1/2”
5/16”
131- Fits Up To 1/4”
Material: Color/StyreneWhite - Black
8 & 10 Ft. Lengths
13/64”
3/64”9/32”
1/4”
141- Fits 1/4”
White - Black- Silver- BeigeMaterial: Color/Styrene-Silver PVC
12 Ft. Lengths
21/64”
1/4”
3/8”
3/64”
383- Fits 3/8”
Material: Color/StyreneWhite - Black- Beige
12 Ft. Lengths
We Are Happy To Provide Samples For Prototypes & Design Builds - Please Inquire.
PROTOTYPESAMPLES
COLOR U-CHANNEL MOULDING
A-29
1”1/16”
29/32”
1/2”
1/4”
1/16”
2”
3/32”
1-1/2”1/16”
1-25/64”
1/2”
1-1/4”1/16”
1-9/64”
1/2”
11/16”
3/8”
3/4”1/16”
31/64”
5/8”
5/8”3/64”
3/8”
1/2”
5/8”3/64”
3/8”
1/2”
1/2”3/64”
1-3/64”
1-1/16”
11/16”1/16”
5/8”
3/4”
3/4” 5/64”
1/2”
5/8”
5/8” 1/16”
.575
.375.040Wall Thickness
7/16”
1/2”
1/2” 3/64”
R104-683- Fits 1/2”212- Fits 1/2”
White - Black - BeigeMaterial: Color/Styrene
12 Ft. Lengths
White - Black - BrownMaterial: Styrene
12 Ft. LengthsPLEC- Fits 9/16”
BlackMaterial: PVC
8 Ft. Lengths
158- Fits 5/8”
12 Ft. Lengths585- Fits 5/8”
White - Black - BrownMaterial: Color/Styrene
12 Ft. Lengths
Material: Color/StyreneWhite - Black- Brown - Beige
R104-554 Fits 5/8”
White - BlackMaterial: Styrene
12 Ft. LengthsR104-569- Fits 3/4”
White - Black Material: Styrene
12 Ft. Lengths341- Fits 3/4”
12 Ft. Lengths
Material: Color/Styrene-Silver PVCWhite - Black- Brown- Silver - Beige
100- Fits 1” 114- Fits 1-1/4” 112- Fits 1-1/2”
110- Fits 2”
R104-5145- Fits 1-1/16”
White - Black - BrownMaterial: Styrene
12 Ft. Lengths
White - Black - BrownMaterial: Styrene
12 Ft. Lengths
White - Black - BrownMaterial: Styrene
12 Ft. Lengths
White - Black - BrownMaterial: Styrene
12 Ft. Lengths12 Ft. Lengths
Material: Color/StyreneWhite - Black- Brown
We Are Happy To Provide Samples For Prototypes & Design Builds - Please Inquire.
PROTOTYPESAMPLES
COLOR U-CHANNEL MOULDING
A-30
.190
.210
.330
.360
1/16” Ref.
.030
.040
.140
.150
.540
.560
.190
.210
.250
.270
.285
.315
.175
.190
.230
.240
.520
.550
.750
.250
5/16”
1/2”
13/64”
3/64”9/32”
1/4”
2128-CL Fits 1/16”
Clear12 Ft. Lengths
Material: Butyrate
708-CL Fits 1/16” 130-CL Fits 1/8”
141-CL Fits 1/4” 1830-CL Fits 1/4” P2743 Fits 1/4”
131-CL Fits 1/4” 2014-CL Fits 1/4” 383-CL Fits 3/8”
Gap adjustable
Clear12 Ft. Lengths
Material: Butyrate
Clear8 & 10 Ft. Lengths
Material: PVC
Clear12 Ft. LengthsMaterial: PVC
Clear12 Ft. Lengths
Material: Butyrate
Clear8 & 10 Ft. Lengths
Material: PVC
Clear12 Ft. Lengths
Material: Butyrate
Clear12 Ft. LengthsMaterial: PVC
Clear8 Ft. Lengths
Material: Butyrate
.060 wall thickness
3/16”
1/2”
21/64”
1/4”
3/8”
3/64”
1059-CL Fits 11/64”.130.140
.500
.490
.180
.170Clear
12 Ft. LengthsMaterial: RPVC
3/8”
3/8”
5/16”
3/64” Wall
385-CL Fits 3/8”
Material: PVCClear Only
12 Ft. Lengths
142F-CL Fits 3/16”
Clear12 Ft. Lengths
Material: Styrolux
.488”
.075”
.190”
1”1/16”
29/32”
1/2”
100-CL Fits 1”
Clear12 Ft. LengthsMaterial: PVC
17/32”
5/16”
5/8”3/64”
585-CL Fits 5/8”
Clear12 Ft. LengthsMaterial: PVC
341-CL Fits 3/4”
Clear12 Ft. LengthsMaterial: PVC
11/16”
3/8”
3/4”1/16”
1/2”3/64”
27/64”
1/4”
121-CL Fits 1/2”
Clear12 Ft. LengthsMaterial: PVC
Cut Program AvailableSEE PAGE 9
FOR DETAILS
CLEAR U-CHANNEL MOULDING
A-31
.875
.970 3/4”
.938
.845 5/8”.723
.6401/2”
.660
.500
1/4”
.520
.390
1/16”
.0801/4”
3/4”
.0801/4”
5/8”1/2”
1/4”
3/16”
5/16”
15/32”
1/8”
9/32”
3/8”
1/16”
7/32”
5/16”
1/32”5/32”
1/4”
113-1001 Fits 1/32” 113-1002 Fits 1/16” 113-1003 Fits 1/8”
Black 500 Ft. Coils Black 500 Ft. CoilsMaterial: Dense
Neoprene Rubber
809-343 Fits 3/16”-1/4”
Black & White 125 Ft. CoilsMaterial: PVC with
Segmented Metal Core
Our profiles feature advanced mechanical & thermal properties by adding Molybdenum Disulphide to unmodified Nylon 6. The results are outstanding including:
NG-0062 Fits up to 1/16”
NG-0125 Fits 1/16”-1/8” NG-0250 Fits 1/8”-1/4” NG-0187 Fits 1/8”-3/16” NG-0312 Fits 1/4”-5/16”
Nylon snap-on protection for conveyor rails
Nylon snap-on protection for rails
Nylon snap-on protection for conveyor rails
Nylon snap-on wear strip for conveyor systems
100 Ft. Coils
12 Ft. Lengths100 Ft. Coils 100 Ft. Coils 100 Ft. Coils
.031 MAX. GAP
.055±.005
.300
.345
.245
.220
.500±.031
.031 MAX
.125 REF
.062±.015
.500±.040
.050 MAX. GAP
.055±.005
.250±.010
Cut Program Available
Material: Dense Neoprene Rubber
Black 500 Ft. CoilsMaterial: Dense
Neoprene Rubber
113-1004 Fits 3/16”
113-1005 Fits 1/4”
Black 500 Ft. CoilsMaterial: Dense
Neoprene Rubber
Black 500 Ft. CoilsMaterial: Dense
Neoprene Rubber
808-625 Fits 5/8”
809-317 Fits 1/8”
Black & White 100 Ft. CoilsMaterial: PVC with
Segmented Metal Core
Black Only 100 Ft. Coils
808-750 Fits 3/4”
Black Only 100 Ft. CoilsMaterial: VinylMaterial: Vinyl
809-349 Fits 1/2”
Black & White 150 Ft. CoilsMaterial: PVC with
Segmented Metal Core
809-837-BK Fits 5/8”
Black Only 100 Ft. CoilsMaterial: PVC with
Segmented Metal Core
809-838-BK Fits 3/4”
Black Only 100 Ft. CoilsMaterial: PVC with
Segmented Metal Core
• suPeriOr weAr resisTANCe...especially over unfilled nylon and in many cases outwears metal - and are not vulnerable to fretting and galvanic corrosion• suPeriOr HeAT resisTANCe...these profiles resist distortion at temperatures over 300° F• suPeriOr surFACe LuBriCiTy...making them ideal when lubrication is undesirable or impractical• suPeriOr sTreNGTH AND riGiDiTy...greater tensile and compressive strengths and the elastic modulus is increased more than 40%, making them more resistant to deformation under load• suPeriOr DiMeNsiONAL sTABiLiTy...maintain better fits and clearances, since the linear coefficient of thermal expansion is less than that of unmodified Nylon• GreATer weAr resisTANCe, strength and heat resistance than standard grades of Nylon• MAxiMuM CONTiNuOus TeMPerATure is 225° F. COLOr is DArK GrAy
APPLICATIONS:• Protect conveyor rails, beds and products from sliding surface friction with these molybdenum disulphide (MDS) filled strips• Also excellent as striker plates and liners. The strips require NO lubrication, and have less surface friction
.0651/4”
1/2”
808-500 Fits 1/2”
Black Only 100 Ft. CoilsMaterial: Vinyl
Nylon snap-on wear strip for conveyor systems
NG-0093 Fits 1/16”-3/32”
Nylon sheet metal protector
100 Ft. Coils
.105
.250
.635.230
.055±.005
.156
.095
.156 R.
FLEXIBLE U-CHANNEL
NYLA-GLIDE GR™ PROFILE SHAPES
A-32
FOR MORE CAP & DIVIDER MOULDINGS, SEE PAGES 34-39
12 FT. LENGTHS
5/16”
3/8”
3/4”3/8”
7/8”
9/32”
1/4”
13/32”
1/4”
7/16”
9/32”
1/4”
1/4”
1/4”
5/16”
.725
.695
.765
.735
.245
.215
.630
.650
.590
.610.245.275
.455
.475
.505
.525
.245
.275
.320
.340
.385
.405
.480
.500
.195
.205
.240
.260
.285
.315
.190
.120
.175
.185
.205
.220
.170
.180
.210
.230
.220
.240
.170
.190
.210
.230
.732
.765
.105
.125
.135
.155
.280
.305
.025
.075w/GlueBead
.260
.280
.300
.330
1964- Fits up to 1/16” 1999- Fits 1/8” 2325- Fits 3/16”1982- Fits 3/16”1962- Fits 3/16”
2317- Fits 3/8”1991- Fits 1/4” 2412- Fits 1/2” 2413- Fits 5/8” 2414- Fits 3/4”
12 FT. LENGTHS All Stainless Steel 430 Grade (magnetic)
SS853-PInside Corner
SS852-P(FOR 1/4” MATERIAL)
Outside Corner
SS900SP-P.015 THICK
SS900-P.015 THICK
SS914-P.020 THICK
SS907-P.015 THICK
SS900T-P.020 THICK
SS911-P.023 THICK
SS908-P.023 THICK
Bright Brass, Bright Chrome,Glossy Black, Glossy White
200 Ft. CoilsMaterial: PVC/Film Material: ABS/Mylar Material: ABS/Mylar Material: ABS/MylarMaterial: ABS/Mylar
Material: ABS/Mylar Material: ABS/Mylar Material: ABS/Mylar Material: ABS/Mylar Film Material: ABS/Mylar Film
FINISH CHARTP Polished Shiny / Mirror Finish.
SEE PAGE 9FOR DETAILS
Cut Program Available
1. STANDARD CUT- Rough cut to allow for small parcel shipping.2. CUT TO SIZE - Achieves a higher tolerance.
PLASTIC METALLIC CHANNEL MOULDING
STAINLESS STEEL MIRROR MOULDINGS
Finishes Available: Polished Brass, Polished Chrome, Brushed Brass & Brushed ChromePlease inquire as finishes vary from style to style
A-33
0.812
1.000
1.124
0.062
0.313
1.125
.062
1.001
1.000
1.000
0.125
0.750
0.500
1.000
0.125
0.750
0.750
0.875
0.062
0.751
0.500
0.865
0.775
0.045
0.375
0.750
0.062
0.626
0.562
0.624
0.500
0.0620.563
0.563
0.062
0.439
0.313
0.500
0.062
0.376
0.375
0.500
0.094
0.312
0.938
0.406
0.062
0.282
0.375
0.375
0.250
0.063
0.297
0.219
0.125
0.047
ALU1257- Fits 9/32”
ALU847- Fits 1/2”
ALU247- Fits 3/4”
ALU557- Fits 1”
ALU148- Fits 5/16”
ALU347- Fits 5/8”
ALU1041-S Fits 3/4”
ALU448- Fits 1”
ALU57- Fits 3/8”
ALU447- Fits 3/4”
ALU547- Fits 7/16”
ALU947- Fits 3/4”
ALU757- Fits 1/8” ALU257- Fits 1/4”
FINISH CHARTM Mill As extruded - may or may not have “scratches”/die lines. Dull Finish. P Polished - Mechanical Shiny / Mirror Finish.S Satin - Clear Anodized Dull, Matte Finish. BS Brushed Satin Lightly Brushed (shows grain), Satin Finish.
0.313
0.938
0.062
0.814
ALU157C- Fits13/16”
0.313
1.000
0.062
0.876
ALU357- Fits 7/8”
12 FT. LENGTHS
ALU2161-S Fits 3/4”
0.312
0.758
0.062
0.882
8 Ft. LengthsFor 1/2”, 5/8”, & 3/4” Shelves13/16”
1/8”
3/4”
3/4”
A
C
B
Fits Shelf Size
PART # A B CSHF-A500-* 45/64” 3/4” 1/2”SHF-A625-* 27/32” 3/4” 5/8”SHF-A750-* 15/16” 3/4” 3/4”
ALUMINUM CHANNEL MOULDINGS
ALUMINUM “NO BOW” SHELF CHANNEL
A-34
650-WH650-BK650-BR650-SILWhite - Black - Brown - Silver8 Ft. LengthsMaterial: Styrene (BK/WH/BR), PVC (SIL)
White - Black - Brown - Silver8 Ft. LengthsMaterial: Styrene (BK/WH/BR), PVC (SIL)
P641-WHP641-BK
White - Black8 Ft. LengthsMaterial: Styrene
650-BK-A650-WH-A 650-BR-A650-SIL-A
P631-WHP631-BK
White - Black8 Ft. LengthsMaterial: Styrene
Fits 1/4”
Fits 1/4”Fits 1/4”W/ TAPE
Fits 1/4”
White - Black - Brown8 Ft. LengthsMaterial: Styrene
210A-BK
Black12 Ft. LengthsMaterial: PVC
2384-WH2384-BK
White - Black8 Ft. LengthsMaterial: Rigid PVC
2384-BK-A2384-WH-A
616-WH616-BK616-BR
White - Black8 Ft. LengthsMaterial: Rigid PVC
Fits 1/16”Fits 1/16”W/ TAPE
Fits 1/16”Fits 1/64”W/ TAPE
White - Black8 Ft. LengthsMaterial: Styrene
616-BK-A616-WH-A
White - Black - Brown - Silver8 Ft. LengthsMaterial: Styrene (BK/WH/BR), PVC (SIL)
Fits 1/8” 600-BK-A 600-WH-A600-BR-A600-SIL-A
Fits 1/8”W/ TAPE
P640-WH
White8 Ft. LengthsMaterial: Styrene
Fits 1/8”Fits 1/16”W/ TAPE
600-BK 600-WH600-BR600-SIL
White - Black - Brown - Silver8 Ft. LengthsMaterial: Styrene (BK/WH/BR), PVC (SIL)
P630-WHP630-BK
White - Black8 Ft. LengthsMaterial: Styrene
Fits 1/8” 1135-BK 1135-WH
White - Black8 Ft. LengthsMaterial: ABS
Fits 1/8”
2395-WH2395-BK
White - Black8 Ft. LengthsMaterial: Rigid PVC
Fits 1/2”1032-WH1032-BK
White - Black8 Ft. LengthsMaterial: ABS
Fits 1/4”
652-WH652-BK652-BRWhite - Black - Brown8 Ft. LengthsMaterial: Styrene
652-WH-A652-BK-A652-BR-A
White - Black - Brown8 Ft. LengthsMaterial: Styrene
W/ TAPE4068-WH4068-BK
White - Black8 Ft. LengthsMaterial: Styrene
4069-WH4069-BK
White - Black8 Ft. LengthsMaterial: Styrene
Fits 1/2” Fits 1/2” Fits 3/4”Fits 5/8”
Cut Program AvailableSEE PAGE 9
FOR DETAILS
COLOR PLASTIC CAPPING
A-35
P651-BK-A Fits 1/4”P651-WH-AP651-SIL-A
P601-BK-A Fits 1/8”P601-WH-AP601-SIL-A
P610-WH-A Fits 1/16”P610-BK-A
883-WH 1/8” Even Leg883-BK
Divider with 11/16” Legs
P611-WH Fits 1/8”P611-BK
P601-WH Fits 1/8”P601-BKP601-BRP601-SIL
P651-WH Fits 1/4”P651-BKP651-BRP651-SIL
P660-WH Fits 5/16”P660-BKP660-BR
4158-WH Fits 3/8”4158-BK
4050-WH Fits 1/2”4050-BK
P750-WH Fits 3/4”P750-BK
White & Black8 Ft. Lengths
Material: Styrene
White & BlackBrown thru Special Order
8 Ft. LengthsMaterial: Styrene
White & Black8 Ft. Lengths
Material: Styrene
White, Black, Brown & Silver8 Ft. Lengths
Material: Styrene
White, Black, Brown, Silver8 Ft. Lengths
Material: Styrene (BK/WH/BR), PVC (SIL)
White, Black, Silver8 Ft. Lengths
Material: Styrene (BK/WH/BR), PVC (SIL)
White, Black, Brown8 Ft. Lengths
Material: Styrene
White & Black8 Ft. Lengths
Material: Styrene
White & Black8 Ft. Lengths
Material: Styrene
White & Black8 Ft. Lengths
Material: Styrene
1134-WH Fits 1/8”1134-BK
1031-WH Fits 1/4”1031-BK
White & Black8 Ft. LengthsMaterial: ABS
White or Black8 Ft. LengthsMaterial: ABS
WITH TAPE
WITH TAPE
2383-WH Fits 1/16”2383-BK
Whtie & Black8 Ft. Lengths
Material: Rigid PVC
P610-WH Fits 1/16”P610-BK
White & BlackBrown thru Special Order
8 Ft. LengthsMaterial: Styrene
White & Black8 Ft. Lengths
Material: Styrene
2383-BK-A Fits 1/16”2383-WH-A WITH TAPE
Whtie & Black8 Ft. Lengths
Material: Rigid PVC
White & Black8 Ft. Lengths
Material: Styrene
WITH TAPE
P751H-WH 3/4” Even LegP751H-BK
SEE PAGE 9 FOR DETAILS
Cut Program Available1. STANDARD CUT- Rough cut to allow for small parcel shipping.2. CUT TO SIZE - Achieves a higher tolerance.
COLOR PLASTIC DIVIDERS
A-36
WITH TAPEFits 1/16” White - Black 8 Ft. Lengths
Material: Rigid PVC
Fits 1/16” White - Black 8 Ft. Lengths
Material: Rigid PVC
2384-WH-A 2384-BK-A
2383-WH-A 2383-BK-A
2384-WH 2384-BK
2383-WH 2383-BK
Fits 1/16” White - Black -Brown
8 Ft. LengthsMaterial: Styrene
616-WH 616-BK616-BR
P610-WH P610-BK WITH TAPE
Fits 1/16” White - Black -Brown
8 Ft. LengthsMaterial: Styrene
616-WH-A 616-BK-A616-BR-A
P610-WH-A P610-BK-A
Fits 1/8” White - Black - Brown - Silver
8 Ft. LengthsMaterial:
Styrene (BK/WH/BR), PVC (SIL)
600-WH 600-BK600-BR600-SIL
P601-WH P601-BKP601-BRP601-SIL
WITH TAPEFits 1/8”
White - Black - Brown - Silver8 Ft. Lengths
Material:Styrene (BK/WH/BR),
PVC (SIL)
600-WH-A 600-BK-A600-BR-A600-SIL-A
P601-WH-A P601-BK-AP601-BR-AP601-SIL-A
Fits 1/8” White - Black 8 Ft. LengthsMaterial: ABS
1135-WH 1135-BK
1134-WH 1134-BK Fits 1/4”
White - Black - Brown - Silver8 Ft. Lengths
Material:Styrene (BK/WH/BR),
PVC (SIL)
650-WH 650-BK650-BR650-SIL
P651-WH P651-BKP651-BRP651-SIL
CAP DIVIDERCAP DIVIDER
CAP DIVIDER CAP DIVIDER
CAP DIVIDER
CAP DIVIDER
(Brown Special Order) (Brown Special Order)
Cut Program AvailableSEE PAGE 9
FOR DETAILS
COLOR PLASTIC CAP & DIVIDER SETS
A-37
WITH TAPEFits 1/4”
White - Black - Brown - Silver8 Ft. Lengths
Material:Styrene (BK/WH/BR),
PVC (SIL)
650-WH-A 650-BK-A650-BR-A650-SIL-A
P651-WH-A P651-BK-AP651-BR-AP651-SIL-A
.215
.235
.430
.480
.790
.840
Polished Chrome12 Ft. Lengths
Material: ABS/Film
.565
.585
.145
.165
.260
.280
.370
.400
.485
.515
.030
.035.215.235
.240
.260
.730
.770
.240
.260
.365
.385
Polished Chrome, Polished Brass Brushed Chrome
12 Ft. Lengths Material: ABS/Film
11340-B/C Fits 1/8”
Polished Chrome12 Ft. Lengths
Material: ABS/Film
Brite ChromeBrite Brass Thru Special Order
8 Ft. LengthsMaterial: ABS/Foil
Fits 1/4” White - Black 8 Ft. LengthsMaterial: ABS
1032-WH 1032-BK
1031-WH 1031-BK
Fits 3/4” White - Black 8 Ft. Lengths
Material: Styrene
4069-WH 4069-BK
P750-WH P750-BK
Fits 1/2” White - Black 8 Ft. Lengths
Material: Styrene
652-WH 652-BK
4050-WH 4050-BK
1949-POL/C Fits 1/4”2469-POL/C Fits 1/4”2469-POL/B2469-BRU/C
1976-POL/C Fits 5/32”
WITH & WITHOUT CLEAR TAPEFits 1/8”
Clear 12 Ft. Lengths
Material: Polyester
846-CL 846-CL-CLA
2028-CL 2028-CL-CLA
WITH & WITHOUT CLEAR TAPEFits 1/4”
Clear 12 Ft. Lengths
Material: Butyrate
2029-CL 2029-CL-CLA
2030-CL 2030-CL-CLA
CAP DIVIDER CAPDIVIDER
CAP DIVIDER
CAP DIVIDER
CAP DIVIDER
CAP DIVIDER
A
A
B
B
BSEE PAGE 9 FOR DETAILS
Cut Program Available
CLEAR PLASTIC CAP & DIVIDER SETS
METALLIC PLASTIC CAPPING
COLOR PLASTIC CAP & DIVIDER SETS
A-38
210-CL Fits 1/64” 23-CL Fits 1/64”
847-CL Fits 3/32”
846A-CL Fits 1/8”
12A-CL Fits 1/64”
12 Ft. LengthsMaterial: PVC
12 Ft. LengthsMaterial: Vinyl
12 Ft. LengthsMaterial: Vinyl
12 Ft. LengthsMaterial: Butyrate
12 Ft. LengthsMaterial: Polyester
210A-CL Fits 1/64”
12 Ft. LengthsMaterial: PVC
12 Ft. LengthsMaterial: Vinyl
Clear Film Tape
Clear Film Tape
White Foam Tape
White Foam Tape
Clear Film Tape
Clear Film Tape
Clear Film Tape
Clear Film Tape
23A-CL Fits 1/64” 847A-CL Fits 3/32”
12 Ft. LengthsMaterial: Butyrate
846-CL Fits 1/8”846-CL-CLA
12 Ft. LengthsMaterial: Polyester
2028-CL Fits 1/8”2028-CL-CLA
2029-CL Fits 1/4”2029-CL-CLA
12 Ft. LengthsMaterial: Butyrate
12 Ft. LengthsMaterial: Butyrate
2033-CL Fits 5/32”
12 Ft. LengthsMaterial: Butyrate
BUTYRATE/CLEAR • 8 FT. LENGTHSP2718 Fits 1/4”
.050 WALL THICKNESS2 WAY CORNER
P2658 Fits 1/4”
.050 WALL THICKNESSDIVIDER
P2720 Fits 1/4”
4 WAY CHANNEL.060 WALL THICKNESS.050 WALL THICKNESS
P2719 Fits 1/4”
3 WAY CORNER
P2743 Fits 1/4”
.060 WALL THICKNESSU CHANNEL
.750
.250
EARRINg CARD HOLDER CLEAR PLASTIC DIVIDERS
PLASTIC JOINER MOULDINGS
CLEAR PLASTIC CAPPING
A-39
ALU1851- Fits 1/2”
SS1450-P Fits 1/16” SS1451-P Fits 1/16” SS851-P Fits 1/4”CAP 12 Ft.
LengthsCAP 12 Ft.
LengthsDIVIDER
12 Ft. Lengths
ALU961- Fits 1/4” to 9/32”ALU851- Fits 1/4” to 9/32”
.875
.375
.280
.38012 Ft.
Lengths
.187
.188
.718
.068
ALU7441-S Fits 1/8” to 5/32”.244
.144
.700.234
w/Punched Holes12 Ft.
Lengths
ALU0214-S Fits 3/32”.244
.110
.700
.200
12 Ft. Lengths
Hole/slot pattern Approx. Every 4”
1.188
.281
.625
1.365
1.00.375
.510
1.650
ALU850- Fits 1/4” to 9/32” ALUT155-S Fits 1/4” to 9/32”12 Ft.
Lengths12 Ft.
Lengths
ALU1850- Fits 1/2”
12 Ft. Lengths
ALU0023-S Fits 1/16”.313
.070
1.00
.15
ALU5044-S Fits 3/32”
.10
1.25
.625
.200
1.250 .500
.291
.370 .424
.308
1.001.325 .500
.514
.651
AVAILABLE IN POLISHED ONLY ALL STAINLESS STEEL 430 gRADE (MAgNETIC)
Punched with holes- spacing
approx. 4-6”
12 Ft. Lengths
ALU2334-S Fits 1/16”
w/Punched Holes12 Ft.
Lengths
Hole/slot pattern Approx. Every 4”
w/Punched Holes12 Ft.
Lengths
Hole/slot pattern Approx. Every 4”
12 Ft. Lengths
12 Ft. Lengths
ALU849- Fits 1/8” to 5/32”.500
.168
1.250
12 Ft. Lengths
ALU0204-S Fits 1/16”.187”
.0625”
.718”
.156”
12 Ft.Lengths
FINISH CHARTM Mill As extruded- may or may not have “scratches”/die lines. Dull Finish. MH= With Holes P Polished-Mechanical Shiny/Mirror Finish. PH= With HolesS Satin- Clear Anodized Dull, Matte Finish. SH= With Holes BS Brushed Satin Lightly Brushed (shows grain). Satin Finish.
Punched with holes- spacing
approx. 4-6”
ALUMINUM DIVIDER
STAINLESS STEEL CAP CORNER & DIVIDER
ALUMINUM CAPPING
A-40
ALU5162-S 135° angle
.765
1.250
.090
45
Inside Corners • 12 Ft. Lengths
Outside Corners • 12 Ft. Lengths
ALU5165-S.812
.500
.500
ALU5272-S 90° angle
.011/-.007.282.750
1.500
90
ALU5163-S 90° angle
.060
2
90
ALU5116-S 90° angleALU5164-S 90° angle ALU5299-S 1.500
1.000.250
.282
.750
.434+.011-.007
45
ALU852- Fits 9/32”
ALU1853- Fits 1/2” ALU1855- Fits 3/4”
ALU1852- Fits 1/2” ALU1854- Fits 3/4”
ALU853- Fits 9/32”
ALU7791- Fits 1/16”
12 Ft. Lengths - Satin Finish • Fits 3/4” Panel Boards PATENT #4840440
FINISH CHARTM Mill As extruded - may or may not have “scratches”/die lines. Dull Finish.P Polished - Mechanical Shiny / Mirror Finish.S Satin - Clear Anodized Dull, Matte Finish
.852
.070
.754.754
.770
R= .052.250
.375
.500
.065
.211
.099 .040
ALU7792- Fits 1/16”
.790
.770
.250
.062
.090
.282.750
1.750.316
2.750
ALUMINUM CORNERS
ALUMINUM OUTSIDE CORNERS
NEW!
A-41
107-681- Fits 1/16”107-680- Fits 1/16”
107-665- Fits 1/4”
Black - Brown - WhiteSTYRENE - 12 FT. LENGTHS
Black - WhiteBrown available - 5000 Ft. Minimum
STYRENE - 8 FT. LENGTHS
.070
90°.375
.375
Color Clear Others Available Min. ApplySTYROLUX
8 FT. LENGTHS
Black - WhiteSTYRENE - 12 FT. LENGTHS
Part Tapers For Friction FitGloss finish closely matches
acrylic and PETG sheets
.135
.135
.622
.120
.060
.367
.622
1-27/64”
23/32”
5/8”
3/4”
1-11/16”
3/4”
3/4”
3/4”
1/2”
1/4”
3/16”
3/64”
1-3/8”
3/4”
1/2”
5/8”
3/4”
17/32”
.060
184- Fits 1/8”
107-687- Fits 1/2”
107-688- Fits 5/8” 107-689- Fits 3/4”
Black - WhiteBrown available - 5000 Ft. Minimum
STYRENE - 8 FT. LENGTHS
Black - Brown - WhiteALSO AVAILABLE IN DOVE GRAY
STYRENE - 8 FT. LENGTHS
107-667- Fits 1/2”
90° Corner Channel
Black - Brown - WhitePOLYPROPYLENE12 FT. LENGTHS
27/32”
1/4”27/32”
3/8”
107-685- Fits 1/4”
1/4” PANEL
107-664- Fits 1/4”
Black - WhiteSTYRENE - 8 FT. LENGTHS
3/16”
1/4”
1/2”
.045
90°
60° Corner Channel
Black - WhiteBrown available
5000 Ft. MinimumSTYRENE - 8 FT. LENGTHS
Black - WhiteBrown available
5000 Ft. MinimumSTYRENE - 8 FT. LENGTHS
.300”
.375”
.125”
.060”
.050”
Cut Program Available2. CUT TO SIZE - Achieves a higher tolerance.•Must be quoted per order.•We require written purchase orders for cut to size orders.•Tolerancearehigher(+/-1/8”or+/-1/16”).•Quantitiescanbeanyamount(100pcs.@14-7/8”or50pcs.@84-11/16”).•Iftolerancesallow,wewillcutstocklengthstovarioussizes (ona12ft.lengthto17-1/4”,69-5/16”and56-1/8”.•Costsvarybyproductandmaterial.•Wastewillbeshippedonlyifrequested.•Nomitercuts.•Noreturnsallowed,unlessourerror.
1. STANDARD CUT - Rough cut to allow for small parcel shipping.•Quantitiesarelimitedperprofile.•Nomorethat2cutsperlength (Ona12ft.length-6ft.and6ft.or8ft.and4ft.,etc.).•Costsvarybyproductandmaterial.•Allcutshaveatoleranceof+/-1inch.•A40%restockingfeeappliesonallreturns unlessourerror.
PLASTIC CORNER CHANNEL MOULDINGS
A-42
FINISHES AVAILABLE IN MILL AND CLEAR SATIN
FINISHES AVAILABLE IN MILL AND CLEAR SATIN
ALU153- ALU113-PALU701-S ALU235-PWith holes-
spacing approx. 6-7”
12 Ft. Lengths
FINISH CHARTM Mill As extruded - may or may not have “scratches”/die lines. Dull Finish.
P Polished Shiny / Mirror Finish.
S Satin Dull, Matte Finish.
WITH HOLES - 12 FT. LENGTHS
12 FT. LENGTHS WITH COUNTERSUNK HOLES 6” ON CENTER
12 FT. LENGTHS WITH COUNTERSUNK HOLES 6” ON CENTER
B
A
A
C
B
CountersunkHoles
CountersunkHoles
CountersunkHoles
Part #Hole
SpacingUnderlip
AOverall
BLipC
ALU968- 6” 5/8” 11/16” 1/4”ALU228- 7” 3/4” 13/16” 1/4”ALU128- 7” 7/8” 15/16” 1/4”ALU28- 6” 1-1/16” 1-1/8” 1/4”
ALU328- 6” 1-1/4” 1-5/16” 1/4”ALU428- 7” 1-5/8” 1-11/16” 1/4”
PART # A BALU436-* 3/8” 5/32”ALU437-* 1/2” 3/16”ALU438-* 3/4” 3/16”ALU439-* 1” 3/16”
PART # A B CALU427-* 3/8” 3/16” 15/16”ALU429-* 3/8” 3/16” 1-11/64”
ALUMINUM OVERLAP FACE NOSINGS
ALUMINUM ROUNDED TRIM
ALUMINUM EDGE TRIM
ALUMINUM SHOWCASE MOULDINGS
A-43
“A FAST, EASY, & COST EFFECTIVEMETHOD OF HANGING CABINETS,
WALL PANELS, PARTITIONS, & SIGNAGE!”
0.250
0.440
1.750
1.785
0.750
0.092
1.375
0.375
0.115
Pre-Cut 2” Pieces With 2 Punched Holes(Approximately 1-1/2” Apart)
Pre-Cut 2” Pieces With 2 Punched Holes(Approximately 1-1/2” Apart)
Pre-Cut 2” Pieces With 2 Punched Holes(Approximately 1-1/2” Apart)
Pre-Cut 2-1/2” Pieces With 2 Punched Holes(Approximately 1-3/4” Apart)
Pre-Cut 2” Pieces With 2 Punched Holes(Approximately 1-1/2” Apart)
4’ & 8’ Lengths(Without Holes)
4’ & 8’ Lengths(Without Holes)
4’ & 8’ Lengths(Without Holes)
12’ Lengths(Without Holes)
12’ Lengths(Without Holes)
4’ & 8’ Lengths(Without Holes)
Wall
Cabinet• Mill Finish• Available In Pre-Cut Pieces and Lengths
Pre-Cut 2” Pieces With 2 Punched Holes(Approximately 1-1/2” Apart)
2.00
1.00
0.250
0.750
0.125
2.25
0.120
1.595
0.360
PART #ALU111-2-M
PART #ALU112-2-M
PART #ALUHAC22-2-M
PART #ALUHAC23-2-M
PART #ALUHA4049-25-M
PART #ALU211-2-M
PART # LENGTHALU111-4 4'ALU111-8 8'
PART # LENGTHALUHA4049-4-M 4'ALUHA4049-8-M 8'
PART # LENGTHALU112-4 4'ALU112-8 8'
PART #ALUHAC22-M
PART #ALUHAC23-M
PART # LENGTHALU211-4 4'ALU211-8 8'
ALUMINUM PANEL CLIPS
A-44
1-1/4”
1-1/4”
2”
2”approx. 095
thickness
approx. 100thickness
Material: Butyrate1750-CL
1755-CL
1/2”
1/2”
3/4”
3/4”
1”
1”.470/.530
.405/.465
approx. 040thickness
approx. 095thickness
approx. 070thickness
520-CL 1748-CL 1749-CL519-CL
12 Ft. Lengths
12 Ft. Lengths
12 Ft. Lengths
12 Ft. Lengths
12 Ft. Lengths
12 Ft. Lengths
2406 Fits 3/8”
12 Ft. LengthsMaterial - ABS/Mylar
.200PSA TAPE.365/
.385
.345/.365
W/ TAPE
2407- Fits 1/2”
12 Ft. LengthsMaterial - ABS/Mylar
1/4”PSA TAPE.490/
.510
.470/.490
W/ TAPE
2409- Fits 3/4”
12 Ft. LengthsMaterial - ABS/Mylar
1/2”PSA TAPE
.740/.760
.720/.740
W/ TAPE
2001-
1.025.995
.320
.300
12 Ft. LengthsMaterial: ABS/Mylar
W/ TAPE
.750/
.770
.240/
.260
2163-
12 Ft. LengthsMaterial: ABS/Mylar
W/O TAPE
2206A- Fits 5/16” x 7/16”White - Black 12 Ft. Lengths
Material: Styrene.320
.450
1/4” FOAM TAPE
W/ TAPE
Reverse cove moulding is used to cover up seams or joints wherever two perpendicular planes meet. The sink top to its backsplash or the ceiling to a wall surface represent typical applications for which our reverse cove moulding was designed. The leg of the profile seals tightly against both surfaces to lend a cleanly trimmed appearance to the finished product.
FINISH CHARTM Mill As extruded - may or may not have “scratches”/die lines. Dull Finish. P Polished Shinny / Mirror Finish.S Satin Dull, Matte Finish with no die lines (Velo Clear). BS Brushed Satin Lightly Brushed (shows grain), Satin Finish.
ALUMINUM
STAINLESS STEEL STAINLESS STEEL COUNTER EDGE SNAP ON MOULDINGS
12 Ft. Lengths with HolesALU441-PHALU141-PH ALU1016-PHALU121-PH
ALU669-
We can also supply custom orderswithout holes -
minimums apply - please inquire.
3/16”
5/16”
5/8”
1/16”
ALU426-SNot Available With Holes
12 Ft. Lengths - Polished Finish
Polished Finish
Polished Finish
Polished or Brushed SatinFinish
Polished Finish with holesPolished Finish Polished FinishSatin Finish
SS801A-P
25/32”1”
9/16”
SS799-PBack Splash Cove(Long Flange, Narrow Overlap)12 Ft. Lengths
Counter sunk holes spacing every 6-1/2”.
Counter sunk holes spacing every 6-1/2”.
Counter sunk holes spacing every 7”.
Punchedholes spacing every 4-1/2”.
Finishes Available: Polished Brass, Polished Chrome, Brushed Brass & Brushed Chrome. Please inquire as finishes vary from style to style
Grade 430
Grade 430
Cut Program Available
SEE PAGE 9FOR DETAILS
(MAgNeTiC)
(MAgNeTiC)
PLASTIC METALLIC ANGLE MOULDINGS W/ADHESIVE
ALUMINUM AND STAINLESS STEEL COVE MOULDING
PLASTIC CLEAR RIGHT ANGLE MOULDING
PLASTIC COLOR ANGLE W/ADHESIVE
A-45
2206- Fits 5/16” x 7/16” 1920- Fits 1/2” x 1” 1441- Fits 1-1/4” x 1/4”
White - Black12 Ft. Lengths
Material: Styrene
1921- Fits 1” x 2” 1922- Fits 1” x 3”
White - Black12 Ft. Lengths
Material: Styrene
White - Black12 Ft. Lengths
Material: Styrene
White - Black12 Ft. Lengths
Material: Styrene
White - Black12 Ft. Lengths
Material: Styrene
1/4”
1-1/4”
1”
2”
.040
3.000
1.000
R0.015.062
.320
.450
.040
.5”
1”
807-631-BK Fits 1/2” 807-555-BK Fits 3/4” 807-591-BK Fits 7/8”
Black150 Ft. CoilsMaterial:PVC
.500
Adhesive.296
.086
.875
Adhesive
.110
.260
.750
Adhesive.260.110
Black100 Ft. CoilsMaterial:PVC
Black50 Ft. Coils
Material:PVC
1919-(approx. .055 thickness)
1/2”
1/2”
(approx. .060 thickness)
5/8”
5/8”
(approx. .075 thickness)
3/4”
3/4”
(approx. .100 thickness)
1”
1”
1”
1”
60
(approx. .100 thickness)
1”
1”
135
(approx. .100 thickness)(approx. .100 thickness)
1-1/4”
1-1/4”
RIGID PVC
85 /88
1-1/2”
1-1/2”
.125
1-1/2”
1-1/2”
.055
Material: StyreneWhite - Black
12 Ft. Lengths
Material: StyreneWhite - Black
Material: StyreneWhite - Black - Brown
Material: StyreneWhite - Black - Brown
Material: StyreneWhite - Black - Brown
Material: StyreneWhite - Black
Material: StyreneWhite - Black
Material: StyreneWhite - Black White - Black
Material: Styrene
White - Black - *Brown*NON STOCK - MINIMUMS APPLY-
PLEASE INQUIRE
12 Ft. Lengths 12 Ft. Lengths 12 Ft. Lengths 12 Ft. Lengths1933- 1934- 1935- 1936-
1937-12 Ft. Lengths 12 Ft. Lengths 12 Ft. Lengths 12 Ft. Lengths 12 Ft. Lengths
1938- 1940- 1951- 1952-
(approx. 045 thickness)
.050
.250”
.250”
Cut Program Available SEE PAGE 9
FOR DETAILS
Cut Program Available SEE PAGE 9
FOR DETAILS
PLASTIC COLOR UNEVEN ANGLE MOULDINGS
PLASTIC FLEXIBLE UNEVEN ANGLE MOULDINGS
PLASTIC COLOR RIGHT ANGLE MOULDING
A-46
ALU269-18- Fits 1/2” x 1/2”
ALU369- Fits 3/4” x 3/4”
ALU449- Fits 3/4” x 3/4”
ALU136- Fits 13/16”x 13/16”
.500
.500 .125
.750
.750 .0625
.750
.750 .125
.813
.813 .063
ALU1569- Fits 1-1/2” x 1-1/2”
ALU1569-316- Fits 1-1/2” x 1-1/2”
ALU1569-18- Fits 1-1/2” x 1-1/2”
ALU4469-316- Fits 2” x 2”
ALU4469- Fits 2” x 2”
ALU8469- Fits 2” x 2”
1.500
1.500
.062
2.000.062
2.000
2.000.125
2.000
ALU469- Fits 1” x 1”
1.000 .062
1.000
ALU749- Fits 1” x 1”
ALU569- Fits1-1/4” x 1-1/4”
1.000 .125
1.000
1.250.062
1.250
ALU5569- Fits 1-1/4” x 1-1/4”
ALU749-316-Fits 1” x 1”
1.250
1.250.125
.500.062
.500
ALU269- Fits 1/2” x 1/2”
12 Ft. Lengths
12 Ft. Lengths
12 Ft. Lengths
12 Ft. Lengths
12 Ft. Lengths
12 Ft. Lengths
12 Ft. Lengths
12 Ft. Lengths
12 Ft. Lengths
12 Ft. Lengths
12 Ft. Lengths
12 Ft. Lengths
12 Ft. Lengths
12 Ft. Lengths
12 Ft. Lengths
12 Ft. Lengths
ALU149-Fits 1/4” x 1/2”
ALU249-Fits 3/8” x 3/4”
ALU669-Fits 1/2” x 13/16”
ALU904-Fits 1/2” x 1”
.500
.250.050
.750
.375.062
1.000
.500 .062
1.500
1.500
.125
FINISH CHARTM Mill
As extruded - may or may not have “scratches” die lines. Dull Finish.
P Polished - Mechanical Shiny / Mirror Finish.
S Satin - Clear Anodized Dull, Matte Finish.
BS Brushed Satin Lightly Brushed (shows grain), Satin Finish.
12 Ft. Lengths12 Ft. Lengths12 Ft. Lengths
HasCounter
Sunk Holes 6-1/2”
1.000 .125
1.000
.1875
1.500
1.500
.125.18752.000
.125
2.000
.1875
.750
ALUMINUM UNEVEN ANGLE MOULDINGS
ALUMINUM EVEN ANGLE MOULDINGS
A-47
103-571- Fits 3/16” Panels 103-635- Fits 1/4” Panels 103-637- Fits 3/8” Panels 103-4175- Fits 1/2” Panels
P4440-CL Fits 1/4” PanelsP4506-CL Fits 3/16” Panels108-640- Fits 1/8” Panels
PVCBlack, White & Clear
PVCBlack, White & Clear
108-641- Fits 3/16”-1/4” Panels
PVC - ClearClear with White Web
PVC - ClearClear with White Web
103-631- For 1/2” Panel 103-630- For 5/8” Panel 103-632- For 3/4” Panel
USE S055 SLOTTER USE S1/S7 SLOTTER USE S1/S7 SLOTTER
Polypropylene12 Ft. Lengths
Black, White & Brown
Polypropylene12 Ft. Lengths
Black, White & BrownPolypropylene12 Ft. Lengths
Black, White & Brown
Polypropylene12 Ft. Lengths
Black, White & Brown
Polypropylene12 Ft. Lengths
Black, White & Brown
Polypropylene12 Ft. Lengths
Black, White & Brown
Polypropylene12 Ft. Lengths
Black, White & Brown
103-639-
9888H 696H
.035/.045 Thick - Polypropylene100 & 500 Ft. Coils
Black, White & Brown
103-638-P4169-CL
.086 Thick - PVC100 Ft. Coils - Clear with White Web
.062/.070 Thick - Polypropylene100 & 500 Ft. Coils
Black, White & Brown
Polypropylene12 Ft. Lengths
Black, White & Brown
103-634- Fits 1/8” Panels
CLEAR ACRYLIC/PVC5 Ft. Lengths
CLEAR P.E.T.G./PVC with glue groove
5 Ft. Lengths
PLASTIC TEE HINGE
FLAT HINGE
PLASTIC PANEL HINGE
A-48
K101-4079-
UPPER TRACK For:K101-606, K101-610,K101-601
STYRENEK101-606-
LOWER DOUBLE FLAT TRACKFor 5/8” Doors
K101-610-
LOWER DOUBLE FLAT TRACKFor 3/4” Doors K101-601-
LOWER SINGLEFLAT TRACK
BROWN, WHITE,BLACK, ALMOND
- OUR MOST POPULAR ASSEMBLY-Complete Set Consists Of:
1 x 12 Ft. Length Upper Track1 x 12 Ft. Length Shoe
1 x 12 Ft. Length Lower Track1 Wheel Per Running Ft.
• Lower track has sidewalls to prevent rollers from slipping off track• 1” (25.4mm) shoe allows superior gripping of glass or plywood doors.• Deep upper track to allow extra clearance and easy installation.• Zinc plated rollers with plastic wheel.• Track & shoe material is rigid PVC.
SLIDING DOOR TRACK SYSTEM WITH WHEELS12 FT. LENGTHS - AvAILABLE IN SILvER GRAY
MT39-SG For 1/4” Doors
180- For 1/8” Doors 140- For 1/4” Doors 120- For 1/2” Doors 340- For 3/4” Doors
*5/32”gap
*5/16”gap
*9/16”gap
*13/16”gap
StyreneWhite - Black - Brown
12 Ft. Lengths
StyreneWhite - Black - BrownAlso Available in Beige
12 Ft. Lengths
StyreneWhite - Black - BrownAlso Available in Beige
12 Ft. Lengths
StyreneWhite - Black - BrownAlso Available in Beige
12 Ft. Lengths
R101-603-BRFor 3/16”-1/4” glass/panelAnti-Rattle Feather Track Polypropylene - Brown
12 Ft. Lengths
NOTE: ALL TRACK CAN BE MADE AvAILABLE WITH PRESSURE SENSITIvE TAPE. PLEASE INQUIRE.
No Glides or Wheels Needed – For Light Weight Doors
SLIDING DOOR TRACK SYSTEM WITH WHEELS12 FT. LENGTHS - AvAILABLE IN SILvER GRAY & BLACK
HIGH QUALITY EASY-ROLL METAL BALL BEARINGS WITH ECONOMY OF PLASTIC TRACK.
CASE PRICES Complete - 2 Tracks,
1 Dual Wheel Per Running Ft.
MT38- For 1/4” Doors
NOTE: Rough Opening
Less 7/8” = Door Size
K101-4079
R26-62
K101-610
100/500’ coils
POLYPROPYLENE - WHITE & BROWN - 12 FOOT LENGTHS
NYLON NON-LOCKING GLIDESNylon Glides Are Recessed Into The Door
R26-62BE 1/4” x 1/4” x 1” For Use with:K101-606K101-610K101-601Mounts onto 1/4” mortise on the bottom of each door with a brad nail
For additional wheels, order
Part #MTR2
For additional wheels, order
Part #MTR
PLASTIC MIRACLE TRACK
PLASTIC MIRACLE TRACK II
PLASTIC SLIDING DOOR TRACK
A-49
FINISH CHARTM Mill As extruded - may or may not have “scratches”/die lines. Dull Finish.
ALUT18-M For 1/8” Doors
ALUT14-M For 1/4” Doors
ALUT12-M For 1/2” Doors
ALUT34-M For 3/4” Doors
ALU7474-M
ALUT134SP-M For 3/4” Doors
ALUSH2-12 For Up to 1/4”Doors
Galvinized Steel
ALURC4-12Galvinized Steel
Wheels every 4-1/2”.Use 2/3 of the track with wheels.Example:6 ft. opening use 4 ft. of roller system.
12 FOOT LENGTHS
SELF SUPPORTING PILE IS ALWAYS ON CENTER AND HAS THE INTEGRITY AND CONSISTENCY
TO ENSURE A TIGHT SEAL.
MANY APPLICATIONS:Windows
DoorsShowcases
50'Minimum Coil
No Glides or Wheels Needed
PART# DESCRIPTION COLORDS-150-GY .270 W x .150 H GrayDS-200-GY .270 W x .200 H Gray
ULTRA PILE DUST SEAL/WEATHERSEAL w/ADHESIVE
ALUMINUM SLIDING DOOR TRACK
A-50
MSDA AVAILABLE UPON REQUEST
Custom Colors Available - 3000 Ft. Minimum, Please Inquire.
FEATURES:• Full .080” gauge.• Co-extruded.• Heavier wear layer.• Precision cut ends.• Shrink free.• No blanching.• Abrasion resistant.• Washable surface.• Soft and workable.• Contemporary colors.• Inside and outside corners made easily.
BLACK - 12 FT. LENGTHS
Transition reducer for glue down carpets; with 1/4” undercut.
1/4” Carpet Reducer
ADHESIVE WHITE ACRYLIC LATEX ADHESIVE,
QUICK-DRYING &NON-FLAMMABLE.
U.S. FEDERAL SPECIFICATIONS:.080” gauge Vinyl Wallbase conforms to all requirements of Federal Specification #SS-W-40A Type 2 Vinyl Plastic: .080” Thickness. Class 1 Vinyl Chloride.FLAME SPREAD AND SMOKE DEVELOPMENT RESULTS:Wallbase has a Flame Spread Index of 20 and Smoke Development Value of 290. Test results, calculated in accordance with ASTM-E84-912. The National Fire Protection Association Life Safety Code 101, Section 6-5.3, “Interior Wall and Ceiling Finish Classification”, classifies materials with respect to Flame Spread and Smoke Development. When tested in accordance with NFPA 255, Vinyl Wallbase gained a Class A rating.
PROFILE:
A B C D E F G H I J K L
PART #CT-250-BK
CARTRIDGE QUART GALLONPART # PART # PART #
WB-ADH-C WB-ADH-Q WB-ADH-G
PART # COLOR DESCRIPTION HEIGHTA BB-448-210 Cocoa (4 ft. lengths & 100 ft. coils) 4”B BB-448-220 Beige (4 ft. lengths & 100 ft. coils) 4”C BB-448-410 Almond (4 ft. lengths & 100 ft. coils) 4”D BB-448-310 Pewter (4 ft. lengths & 100 ft. coils) 4”E BB-448-300 Charcoal (4 ft. lengths & 100 ft. coils) 4”F BB-448-320 Silver (4 ft. lengths & 100 ft. coils) 4”G BB-448-800 Mauve (4 ft. lengths & 100 ft. coils) 4”H BB-448-500 Seagreen (4 ft. lengths & 100 ft. coils) 4”I BB-448-600 Wedgewood (4 ft. lengths & 100 ft. coils) 4”J BB-448-950 Wine (4 ft. lengths & 100 ft. coils) 4”K BB-448-400 White (4 ft. lengths & 100 ft. coils) 4”L BB-448-100 Black (4 ft. lengths & 100 ft. coils) 4”
PART # COLOR DESCRIPTION HEIGHTC BB-648-410 Almond (100 ft. coils) 6”D BB-648-310 Pewter (100 ft. coils) 6”F BB-648-320 Silver (100 ft. coils) 6”K BB-648-400 White (100 ft. coils) 6”L BB-648-100 Black (100 ft. coils) 6”
VINYL CARPET/FLOOR MOULDINGS
VINYL WALLBASE BASEBOARD MOULDINGS
A-51
GROOVE TYPE - Vinyl • Black, Brown, White - 500 Ft. Coils
102-625-
Use S4 - S10 Slotter
.455
.520
.150
.170
.410
.165
.415
.165
.520
.590
1332
.150
.170 .145.130
GROOVE SIZE
102-680- 102-627- 102-681- 102-645-
102-698- 102-644- 102-778- 102-623- 102-624- 102-620-
Use S4 Or S10 Slotter Use S4 Or S10 Slotter
102-648- 102-621- 102-646-
(#102-648 is also available in Fruitwood; #102-621 is also available in Fruitwood & Clear)
STAPLE TYPE - Vinyl • Black, Brown, White - 100 / 500 Ft. Coils
6500-*(Sold In Sets)
6500-*
1/16” - 1/8” - 1/4”Material- RPVC
12 Ft. Long
.820”
.720”
1.025”
.075”
.375”
.400”
Insert May Be:• Glass• Markerboard• Tackboard• Expanded Metal Grilles• Woven Wire Grilles• Decorative MDF
Screening PanelOutside Retainer
Inside Retainer
PVC Retainer Strip
DoorFrame
Insert
BackView
G L A S S
FrontView
Inside Look
Outside Look
Frosty White (*FW)
Platinum (*PLT)
Light Beige (*LB)
Available Colors
^ Available in 100’ coils (Add -100 after part #)
^ Available in 100’ coils (Add -100 after part #)
^ Available in 100’ coils (Add -100 after part #)
^ Available in 100’ coils (Add -100 after part #)
^ Available in 100’ coils (Add -100 after part #)
* BroWnonly
* BroWnonly
* BroWnonly
* BroWnonly
* BroWn& Black
ADJUSTABLE PANEL / GLASS RETAINER
PANEL RETAINER
A-52
COLOR CHARTAdd appropriate color code to part number.
#5 Gray #1 Black
Special Colors - Several colors have been matched - please inquire for colors, costs & delivery.
Custom Colors - 500 Ft. minimum order for color matching. Color & setup charges are on a per run basis. Please inquire.
Installation - Normally with screws, molly bolts or toggle bolts. Most sold separately.
NOTE: Due to fading, discoloration & paper aging, the colors on this page may vary from the actual colors. Please request samples before placing your order for color accuracy.
#301 Linen White
#554 Misson White #541 White Sand
#10 White
#385 Beige Desert
#268 Doeskin#497 Chablis#648 Monterey#2 Ivory#313 Champagne
#176 Taupe#379 Mojave Sand #486 Caisson#682 Khaki Brown#483 Harvard Gray #288 Mocha
#555 Porcelain
#370 Eggshell
#3 Tan#148 Desert Sand
#210 Silver Gray
#238 Bone
#297 Chinchilla
#289 Pearl Gray #263 Pale Yellow #569 Saffron #204 Shell
#373 English Rose
#269 Ecru#366 Soft Peach#359 Ginger Spice
#381 Dawn
#304 VictorianRose
#494 Lavender Heather
#293 Sea Foam #371 Sage Green
#382 Stormy Blue#377 Teal#376 Pale Jade #369 Blue Fog
#583 Alexis Blue
#490 Blue Bird#265 Windsor Blue
#520 Brittany Blue #380 Cordovan#156 Hunter Green#300 Grotto #4 Brown
#411 Pumice
#22 Wodlands
#21 Cappuccino
#694 Cafe' Au Lait#676 Dover White #113 Toffee#29 Blue Ice#718 Silkworm
#361 Pearl #193 Wheat
Impact Protection can be found in a variety of settings, from hospitals and nursing homes, to colleges, offices, casinos, hotels and warehouses. Our handrails, wall guards, corner guards and door/frame protection come in a multitude of colors, profiles and materials. Choose from stainless steel, aluminum, wood, PVC or combinations of materials to match the protection level your environment requires while at the same time complementing décor.
IMPACT PROTECTION SYSTEMS
A-53
CG-10 & CG-20 CORNER GUARDMATERIAL: Textured Vinyl Cover with Aluminum RetainerCLASS A FIRE RATING
CG-12 , CG-13, CG-14 & CG-34 CORNER GUARDMATERIAL: Textured Vinyl Cover, Available with or without Adhesive Drilled options available, please inquireCLASS A FIRE RATING
(A)
(C)
(B)
(D)
FOR COLORS SEE PAGE 52.
267 for Screws & 266 Toggler® Anchors
Need a fastener & anchoring solution?
see page
WITH ADHESIVE
PART # LENGTHPROTECTION
LEVEL ANGLE
WINGDIMENSION
"A"
VINYL COVER THICKNESS DIMENSION
"B"
RADIUSDIMENSION
"C"
OVERALLPROJECTIONDIMENSION
"D"CGT-34-XX-4 4 Ft.
Mediumto
Heavy90˚
3/4" .080" 1/8" .080"CGT-34-XX-8 8 Ft.CGT-34-XX-12 12 Ft.CGT-12-XX-4 4 Ft.
1-1/2" .080" 1/8" .080"CGT-12-XX-8 8 Ft.CGT-12-XX-12 12 Ft.CGT-13-XX-4 4 Ft.
3" .093" 3/16" .093"CGT-13-XX-8 8 Ft.CGT-13-XX-12 12 Ft.CGT-14-XX-4 4 Ft.
4" .093" 3/16" .093"CGT-14-XX-8 8 Ft.CGT-14-XX-12 12 Ft.
WITHOUT ADHESIVE
PART # LENGTHPROTECTION
LEVEL ANGLE
WINGDIMENSION
"A"
VINYL COVER THICKNESS DIMENSION
"B"
RADIUSDIMENSION
"C"
OVERALLPROJECTIONDIMENSION
"D"CGU-34-XX-4 4 Ft.
Mediumto
Heavy90˚
3/4" .080" 1/8" .080"CGU-34-XX-8 8 Ft.CGU-34-XX-12 12 Ft.CGU-12-XX-4 4 Ft.
1-1/2" .080" 1/8" .080"CGU-12-XX-8 8 Ft.CGU-12-XX-12 12 Ft.CGU-13-XX-4 4 Ft.
3" .093" 3/16" .093"CGU-13-XX-8 8 Ft.CGU-13-XX-12 12 Ft.CGU-14-XX-4 4 Ft.
4" .093" 3/16" .093"CGU-14-XX-8 8 Ft.CGU-14-XX-12 12 Ft.
PART # LENGTH *PROTECTION
LEVEL ANGLE
WINGDIMENSION
"A"
VINYL COVER THICKNESS DIMENSION
"B"CG-10-XX-4 4 Ft.
Mediumto
Heavy90˚
3" .100"CG-10-XX-8 8 Ft.CG-10-XX-9 9 Ft.CG-20-XX-4 4 Ft.
2" .085"CG-20-XX-8 8 Ft.CG-20-XX-9 9 Ft.
* 10 Ft. & 12 Ft. lengths are available - please inquire
TOP/BOTTOMCLOSURE CAPSPART # USE WITH
TC-10-XX CG-10-TC-20-XX CG-20-
1/4” Radius
Aluminum Retainer• mill finish• alloy 6063-T6• 0.062” thick
Fasteners - sold separately
(B) Vinyl Cover
(A)
Overall Projection3/8”
TC-10/TC-20Top/BottomClosure Cap
Drywall Screw
5/16”
IMPACT PROTECTION SYSTEMS
A-54
CG-50, CG-51, CG-52, CG-55, CG-60, CG-65 CORNER GUARDMATERIAL: #4 Satin Finish 304 Grade Stainless SteelIdeal for lab and/or foot service environments!Installs easily with adhesive. Drilled options available, please inquire.
CLEAR POLYCARBONATE CORNER GUARDSMATERIAL: PolycarbonateUL 94 V-2 FLAMMABILITYThe CG-16 is un-drilled and comes with brad nails. All other profiles are drilled with countersunk holes and include #6 x 1" oval head sheet metal screws.
(A)
135˚
(B)
(C)
(A)
45˚
(B)(C)
1/4”
(A) (C)
(B)
(A) (C)
(B)
90˚
WALL GUARDS: ACCENT RAILSMATERIAL: High Impact Vinyl Cover with Aluminum RetainerCLASS A FIRE RATEDMolded PVC end caps and outside corners are available.These versatile shapes can be used as a chair rail, bumper rail, or just to provide a color accent.Suggested to mount to every other stud, approximately 32".
Outside Corner
AluminumRetainer
End Cap
Field Mitre Inside Corner
Vinyl Cover
EB-25-
EBR-30-
WG-22-
part # ADH110.6 oz.
Need adhesive?
FOR COLORS SEE PAGE 52.
267 for Screws & 266 Toggler® Anchors
Need a fastener & anchoring solution?see page
1-1/16”
Aluminum Retainer - continuous• mill finish• 0.062” thick
1-1/8”
Fasteners-sold separately
Vinyl cover• high impact• 0.100 thick• high gloss finish
PART # LENGTHPROTECTION
LEVEL ANGLE
WINGDIMENSION
"A"
VINYL COVER THICKNESS DIMENSION
"B"
RADIUSDIMENSION
"C"CG-50-4 4 Ft.
Heavy
90˚
3-1/2"
16 GA.(059")
1/8"
CG-50-8 8 Ft.CG-51-4 4 Ft. 2"CG-51-8 8 Ft.CG-52-4 4 Ft. 1"CG-52-8 8 Ft.CG-55-4 4 Ft. 3-1/2" 3/4"CG-55-8 8 Ft.CG-60-4 4 Ft.
135˚3-1/2" 1/8"CG-60-8 8 Ft.
CG-65-4 4 Ft. 3-1/2" 3/4"CG-65-8 8 Ft.
PART # LENGTHPROTECTION
LEVEL ANGLE
WINGDIMENSION
"A"
COVER THICKNESS DIMENSION
"B"
RADIUSDIMENSION
"C"CG-16-132-
4 = 4 Ft.
8 = 8 Ft.Medium
90˚
3/4" .050" 1/16"CG-17-132- 1-1/8" .075" 1/8"CG-24-132- 2" .085" 1/8"CG-18-132- 2-1/2" .100" 1/8"CG-25-132- 3" .110' 1/8"CG-19-132- 135˚ 2-1/2" .100" 1/8"CG-22-132- 45˚ 2-1/2" .100" 1/8"
PART # LENGTHPROTECTION
LEVEL
FACE WIDTHDIMENSION
"A"
COVER THICKNESS DIMENSION
"B"
OVERALLPROJECTIONDIMENSION
"C"EB-25-
12 Ft. Medium1-1/8" .100" 1-1/16"
EBR-30- 2" .085" 1-1/8"WG-22- 2" .100" 1-3/4"
END CAPSPART # USE WITHEB-26- EB-25EB-31- EBR-30EC-22- WG-22
OUTSIDE CORNERSPART # USE WITHEB-27- EB-25-EB-32- EBR-30-OC-22- WG-22-
1-1/8”
Aluminum Retainer - continuous• mill finish• 0.062” thick
2”
Fasteners- sold separately
Vinyl cover• high impact• 0.085 thick• high gloss finish
1-3/4”
Aluminum Retainer - continuous• mill finish• 0.063” thick
2”
Fasteners- sold separately
Vinyl cover• high impact• 0.100 thick• high gloss finish
IMPACT PROTECTION SYSTEMSIMPACT PROTECTION SYSTEMS
A-55
2-15/16" to 6" WIDE WALL GUARDSMATERIAL: Textured Vinyl with Aluminum Retainer • 12 Ft. LengthsCLASS A FIRE RATED Accessories: Molded PVC end caps and outside corners are available.Select profiles offer an accent strip, continuous cushioned bumper and inside corner. Refer to chart below for more details.
Aluminum Retainer - continuous• mill finish• 0.062” thick
Fasteners-sold separately• mount 32” on center
1”
2-15/16”
Vinyl Cover• high impact, textured• 0.100” thick
Aluminum Retainer - continuous• mill finish• 0.080” thick
Fasteners-sold separately• mount 32” on center
4”
3/4”
Vinyl Cover• high impact, textured• 0.080” thick
Impact Cushion• continuous - included
Aluminum Retainer - continuous• mill finish• 0.072” thick
Fasteners-sold separately• mount 16” on center - staggered5”
1-1/16”
Vinyl Cover• high impact, textured• 0.080” thick
Impact Cushion• continuous - included
Field Mitre Inside Corner
Vinyl Cover
ETC-3 End Cap
Aluminum Retainer
OTC-3 Outside Corner
ButtJoint
1”
Field Mitre Inside CornerVinyl Cover
ECL-4 End Cap
Aluminum Retainer
OC-4 Outside Corner
ButtJoint
3/4” ECR-4 End Cap
B-100 Impact Cushion
ITC-5Inside Corner
Vinyl Cover
ETC-5 End Cap
Aluminum Retainer
OTC-5 Outside Corner
ButtJoint
1-1/16”ETC-5 End Cap
B-100 Impact Cushion
Accent Strip - please inquire
1-3/8”
3/4”
Aluminum Retainer - continuous• mill finish• 0.080” thick
Fasteners-sold separately• mount 16” on center - staggered
6”
1”
Vinyl Cover• high impact, textured• 0.100” thick
Impact Cushion• continuous - included
Vinyl Cover
ETC-6 End Cap Aluminum Retainer
OTC-6 Outside Corner
ButtJoint
1”ETC-6 End Cap
WGB-8 Impact Cushion
Field Mitre Inside Corner
FOR COLORS SEE PAGE 52.
267 for Screws & 266 Toggler® Anchors
Need a fastener & anchoring solution?
see page
END CAPS
OUTSIDECORNERS
INSIDECORNERS
WALLGUARDS
STYLE PART # SIZE PROTECTION LEVEL PART # PART # PART #A WG-3- 2-15/16" Medium ETC-3- OTC-3- -
B WG-4- 4" Mediumto
Heavy
ECL-4-(left) OTC-4- -ECR-4-
(right)C WG-5- 5" ETC-5- OTC-5- ITC-5-D WG-6- 6" ETC-6- OTC-6- -
IMPACT PROTECTION SYSTEMSIMPACT PROTECTION SYSTEMS
A-56
7-3/4" to 8" WIDE WALL GUARDSMATERIAL: Textured Vinyl with Aluminum Retainer • 12 Ft. LengthsCLASS A FIRE RATED Accessories: Molded PVC end caps and outside corners are available.Select profiles offer an accent strip, continuous cushioned bumper and inside corner.Refer to chart below for more details.
WALL GUARDSMATERIAL: Clear Lexan/Polycarbonate • 8 Ft. LengthsCLASS A FIRE RATED
Vinyl Cover
ETC-8 End Cap Aluminum Retainer
OTC-8 Outside Corner
ButtJoint
1”
ETC-8 End Cap
WGB-8 Impact Cushion
Field Mitre Inside Corner
Aluminum Retainer - continuous• mill finish• 0.080” thick
Fasteners-sold separately• mount 16” on center - staggered
7-3/4”
1”
Vinyl Cover• high impact, textured• 0.100” thick
Impact Cushion• continuous - included
FOR COLORS SEE PAGE 52.
267 for Screws & 266 Toggler® Anchors
Need a fastener & an anchoring solution?
see page
Pre-drilled hole for #6 fasteners• approximately 3” from each end, then approximately 18” o.c.
96”
CR-3 or CR-4 Lexan ® chair rail
5/16”
Extruded Lexan®/Polycarbonate• clear• 0.100” thick
Hardware• #6 x 1” pan head, nickel plated, hi-lo screw, and vinyl expansion anchor, supplied with CR-3/CR-4 rail
3” (CR-3)4” (CR-4)
PART # HEIGHTPROTECTION
LEVELCR-3-132 3" Medium to
HeavyCR-4-132 4"
END CAPS
OUTSIDECORNERS
INSIDECORNERS
WALLGUARDS
STYLE PART # SIZE PROTECTION LEVEL PART # PART # PART #E WG-7- 8" Medium to
HeavyETC-7- OTC-7- ITC-7-
F WG-8- 7-3/4" ETC-8- OTC-8- -
Aluminum Retainer - continuous• mill finish• 0.072” thick
Fasteners-sold separately• mount 16” on center - staggered
8”
1-3/8”
Vinyl Cover• high impact, textured• 0.080” thick
Impact Cushion• continuous - included
Vinyl CoverETC-6 End Cap
Aluminum Retainer
OTC-7 Outside CornerButtJoint
1-3/8”
ETC-7 End Cap
B100 Impact Cushion
ITC-7Inside Corner
Accent Strip- please inquire
1-3/4”
IMPACT PROTECTION SYSTEMSIMPACT PROTECTION SYSTEMS
A-57
VINYL TEXTURED HAND RAILSMATERIAL: Textured Vinyl with Aluminum Retainer • 12 Ft. LengthsCLASS A FIRE RATED Suggested to mount to every stud.
FOR COLORS SEE PAGE 52.
BR-1200
BR-800
Aluminum Retainer - continuous• mill finish• 0.100” thick
Fasteners• sold separately
3-9/16”
1-1/2”
Vinyl Cover• high impact, textured• 0.080” thick
1-1/2” Dia.
Mounting Bracket• molded vinyl• 32” on center
Aluminum Retainer - continuous• mill finish• 0.082” thick
Fasteners• sold separately
1-1/2”
Vinyl Cover• high impact, textured• 0.100” thick
1-1/2” Dia.
Mounting Bracket• molded vinyl• 32” on center
IOC-1250 Inside/Outside Corner
Vinyl Cover
BRL-1225 Return
Aluminum Retainer
BR-1206 Bracket
ButtJoint
3”
BRR-1225 Return
IOC-1250 Inside/Outside Corner
Vinyl Cover
Aluminum Retainer
ButtJoint
3-3/4”
BRR-825 Return
OBR-850 Outside Corner
BRR-825 Return BR-107 ReturnIBR-875 Outside Corner
PART # DESCRIPTION
BR-1200- 1-1/2" Diameter Rail
ACCESSORIES
PART # DESCRIPTIONBR-1206- Molded Color Bracket (no hardware)
BRL-1225- Left Return (w/hardware)BRR-1225- Right Return (w/hardware)IOC-1250- Inside/Outside Corner (w/hardware)SPL-1200 Hand Rail Splice (w/hardware)
PART # DESCRIPTION
BR-800- Designer Hand Rail
ACCESSORIESPART # DESCRIPTIONBR-107- Bracket (no hardware)
BRL-825- Left Return (w/hardware)BRR-825- Right Return (w/hardware)OBR-850- Outside Corner (w/hardware)IBR-875- Inside Corner (w/hardware)SPL-800 Hand Rail Splice (w/hardware)
IMPACT PROTECTION SYSTEMS
A-58
BR-600V
Vinyl Cover
Aluminum Retainer
ButtJoint
2-15/16”
BRR-625 ReturnBR-675
Inside CornerBR-108 Bracket
OBR-650 Outside Corner3-3/16”
Impact Cushion
3/4”Vinyl Cover
Accent Strip- please inquire
BRL-625 Return
Aluminum Retainer - continuous• mill finish• 0.072” thick
Fasteners-sold separately
1-1/2” Vinyl handrail• high impact, textured• 0.080” thick
1-1/2”
Mounting Bracket• molded vinyl• 32” on center
Vinyl bumper guard• high impact, textured• 0.080” thick
Impact Cushion - continuous• included w/handrail
VINYL TEXTURED HAND RAILSMATERIAL: Textured Vinyl with Aluminum Retainer • 12 Ft. LengthsCLASS A FIRE RATED Suggested to mount to every stud.
FOR COLORS SEE PAGE 52.
BR-500
PART # DESCRIPTION
BR-600V- Crescent Hand Rail(Comes in 2 pieces)
PART # DESCRIPTION
BR-500-Vinyl Covered
Aluminum Hand Rail
Aluminum Retainer - continuous• mill finish• 0.080” thick
Fasteners• sold separately
1-1/2”Vinyl Cover• high impact, textured• 0.080” thick
1-1/2” Dia.
Mounting Bracket• molded vinyl• 32” on center
Vinyl Cover
Aluminum Retainer
ButtJoint
2-15/16”
BR-527 Return
IOC-557 Inside/Outside Corner BR-107 Bracket
BR-527 Return
IOC-557 Inside/Outside Corner
ACCESSORIESPART # DESCRIPTIONBR-107- Bracket (no hardware)
BRL-527- Left Return (w/hardware)BRR-527- Right Return (w/hardware)IOC-557- Inside/Outside Corner (w/hardware)SPL-500 Hand Rail Splice (w/hardware)
ACCESSORIESPART # DESCRIPTIONBR-108- Bracket (no hardware)
BRL-625- Left Return (w/hardware)BRR-625- Right Return (w/hardware)OBR-650- Outside Corner (w/hardware)IBR-675- Inside Corner (w/hardware)SPL-600 Hand Rail Splice (w/hardware)
IMPACT PROTECTION SYSTEMS
A-59
IGID
Material: Polycarbonate
EnD CAP
2.00”
1.13”
1.84”
EnD CAP
CornErBase top accessories
2”
Features & BeneFits:• ProfilematchesCartguard1forseamlesstransitionfromrigidtoflexibleproducts
• Madefromaminimumof91%preconsumerpolycarbonatewaste
• ContributestowardssatisfyingMRCREDIT4-1andMRCREDIT4-2underLeed.
• ExceedsImpactperformanceofHighImpactPVCby29%andABSby63%.
• 100%recyclable.LaseretchedrecyclingsymbolandresinIDcode.
• 100%Chlorinefree(PVCfree,vinylfree)• Doesnotemithazardousdioxinsifincineratedduringwastedisposal
0.848”
0.316”1.12”
0.88”
144”90°
0.88”
1.50”
1.13”
CornEr
90°
1.12”
1.50”
2.00”1.125”
144”
2”
2”
PArT # DESCrIPTIon LEnGTHGGT-10-* 1”Top 12’
GGB-10-BK-* 1”Base 12’
PArT # DESCrIPTIonGGE-10-* 1”EndCapGGC-10-* 1”Corner
PArT # DESCrIPTIon LEnGTHGGT-20-* 2”Top 12’
GGB-20-BK-* 2”Base 12’
PArT # DESCrIPTIonGGE-20-* 2”EndCapGGC-20-* 2”Corner
PMS BlackHussmann 701,Kysor 85
401 Black PMS 877C
111 Silver 101 GrayPMS 430C
Hussmann 054
105 SteelPMS 425C
501 RedPMS 1797C
Hussmann 715, Kysor 161
701 BluePMS 293C
609 PuttyPMS 452C
Hussmann 078, Kysor 121
604 Light CaramelPMS 465C
601 BeigePMS 4685C
*Stock Colors:
562 MangoPMS 296C
713 Deep BluePMS 294C
732 SapphirePMS 165C
602 BrownPMS 1545C PMS White
Hussmann 700, Kysor71
801 White
533 RaspberryPMS 216C
739 Majestic Purple
PMS 2695C
310 Mellow Yellow
PMS 1235CHussmann 719
201 GreenPMS 348C
*Standard Colors: Available to ship within 3-4 weeks
0.28”
1.5”
1.13”
1.50”
0.88”
1”
FIXTURE & WALL BUMPER
A-60
Features & BeneFits:• MadefromflexiblePVC• WorksseamlessywithGreenguard1forsmoothtransitions• Designedtowraparoundcurvedfixturesandcases• Cancompletearadiusassmallas4”
lexible
PArT # DESCrIPTIon LEnGTHCGT-10-FLX-* 1”Top 72’GGB-10-BK-* 1”Base 12’
PArT # DESCrIPTIonGGE-10-* 1”EndCapGGC-10-* 1”Corner
NOTE: Min order for flexible is 12 ft. and must be ordered in 12 ft. increments
PArT # DESCrIPTIon LEnGTHCGT-20-FLX-* 2”Top 72’GGB-20-BK-* 2”Base 12’
NOTE: Min order for flexible is 12 ft. and must be ordered in 12 ft. increments PArT # DESCrIPTIonGGE-20-* 2”EndCapGGC-20-* 2”Corner
Material: Top = PVCEnd Caps, Corner, Base = Polycarbonate
1”
2”
Base top accessories
0.848”
0.316”
2”
1.125”
1.125”
0.875”
0.28”
1.5”
2.00”
1.13”
1.84”
EnD CAP
CornEr
90°
1.12”
1.50”
2.00”
EnD CAP 1.13”
1.50”
0.88” 90°
0.88”
1.50”
1.13”CornEr
PMS BlackHussmann 701,Kysor 85
401 Black PMS 877C
111 Silver 101 GrayPMS 430C
Hussmann 054
105 SteelPMS 425C
501 RedPMS 1797C
Hussmann 715, Kysor 161
701 BluePMS 293C
609 PuttyPMS 452C
Hussmann 078, Kysor 121
604 Light CaramelPMS 465C
601 BeigePMS 4685C
*Stock Colors:
562 MangoPMS 296C
713 Deep BluePMS 294C
732 SapphirePMS 165C
602 BrownPMS 1545C PMS White
Hussmann 700, Kysor71
801 White
533 RaspberryPMS 216C
739 Majestic Purple
PMS 2695C
310 Mellow Yellow
PMS 1235CHussmann 719
201 GreenPMS 348C
*Standard Colors: Available to ship within 3-4 weeks
FIXTURE & WALL BUMPER
A-61
*FOr COLOrs, see COLOr SWATCHES ON PAGE 60.
*Stock Colors:
PMS BlackHussmann 701,Kysor 85
401 Black PMS 877C
111 Silver 101 GrayPMS 430C
Hussmann 054
Base top
accessories
2.08 0.90
3.00
EnD CAP
1.25
0.90
3.00
90°
CornEr
Base top accessories
96”
1.75”
96”
1.75”1.75” 0.675”
1.75”
ToP CAP
Features & BeneFits:• Damageprotectionforfixtures,merchandisers,wallsandvestibules.
• Decorativeribbinghelpshidescuffmarks
Features & BeneFits:• Verticalcornerprotection•Texturedfinishhelpshidescuffmarks
Material: PVC
Material: PVC
739 Majestic Purple
PMS 2695C
310 Mellow Yellow
PMS 1235CHussmann 719
201 GreenPMS 348C
*Standard Colors: Available to ship within 3-4 weeks
PMS WhiteHussmann 700, Kysor71
801 White 533 RaspberryPMS 216C
562 MangoPMS 165C
0.39”
2.85”
IGID
IGID
PArT # DESCrIPTIon LEnGTHCGT-V175-* 1-3/4”VerticalTrim 8’
CGB-V175-BK* 1-3/4”VerticalBase 8’ PArT # DESCrIPTIon
CGE-V175-* 1-3/4”VerticalTopCap
PArT # DESCrIPTIon LEnGTHCGT-35-* 3”Top 12’
CGB-35-BK* 3”Base 12’
PArT # DESCrIPTIonCGE-35-* 3”EndCapCGC-35-* 3”Corner
FIXTURE & WALL BUMPER
A-62
BLACK - PVC 8 FT. LENGTHS &
25 FT. COILS
278-BK-8 4”278-BK-25
BLACKPVC
100 FT. COILS
BLACKPVC
100 FT. COILS
2122-BK 9/16” 1968-BK 7/8”
K106-544-BR K106-544-BK250 Ft. Coil
K106-555-BK12 Ft. Long
Polyethylene Black & Brown
SJ-5510 1/2”
BLACK and WHITE PVC
50 FT. COILS1/2”
1/64”
MAKES AN EXCELLENT WALL GUARD/CART
GUARD
USE ON CORNER OR USE AS A FLAT
WALL BUMPER BEND TO CREATE EVEN OR
UNEVEN LEG ANGLES
• Protects and prevents walls for damage caused by door knob or lever handle locks.
• Cover plate for damaged walls.• Eliminates replacing or repairing
drywall, plaster or other wall coverings.
• Self stick adhesive foam back cushions door lock impact.
• Neutral white finish can be painted to match surface If desired.
Back has self-adhesive cushioned ring. Includes
hole templates for fastening into wood or
metal surface.
Damage caused by door knob....
...is easily repaired with the UltraDoor Knob Protector Plate.
TABLE BEAD MOULDINGVINYL
CHAIR EDGE GUARD MOULDING VINYL /CLEAR • 100 & 600 FOOT COILS
403-023-000-0600R 101-CL CLEAR
9/16”
.240
.250.217
9/16”.055
.400
.411
.925
.150
STAPLE TO SURFACE100 & 500 FT. COILS
STAPLE TO SURFACE100 & 500 FT. COILS
BRITE BRASSBRITE CHROME
101-B/B101-B/C
PART # SIZEDP300 3” Dia.DP500 5” Dia.
BUMPER GUARD
INDUSTRIAL BUMPER MOULDING
MISCELLANEOUS EXTRUSIONS
FLEXIBLE FLAT BUMPERW/ADHESIVE
DOOR KNOBPROTECTOR PLATES
A-63
without having to spend a lot of “Green”
Go “Green”
Recycled Poly Styrene mouldings are high-impact & 100% recycled. These economical and decorative mouldings are available in 8 ft. and 12 ft. lengths. Free samples available.Achieves LEED Certification.
RPS-01053/4” x 3/4”
RPS-0127-073/4” x 7/16”
RPS-00523/8” x 3/4”
RPS-01201/2” x 1”
RPS-00933/4” x 3/4”
RPS-01673/8” x 7/8”
RPS-09351/2” x 1-5/8”
EXTERIOR-18811/16” x 1-5/8”
EXTERIOR-1801-1/4” x 2”
RPS-02072” x 2” Face: 2-7/8”
RPS-22102-1/2” x 2-1/2” Face: 3-1/2”
RPS-01892-1/2” x 2-1/2” Face: 3-1/2”
RPS-00493” x 2” Face: 3-1/2”
RPS-22253-1/8” x 3-1/8” Face: 4-1/2”
RPS-01833-1/8” x 3-1/8” Face: 4-5/8”
RPS-00453-3/4” x 3-3/4” Face: 5-1/8”
RPS-22051-1/2” x 1-1/2”
RPS-11203” x 3” Face: 4-1/8”
RPS-04922-5/8” x 1”
RPS-0491-071-3/4” x 1”
RPS-04931-1/4” x 1-1/2”
RPS-04901-1/4” x 1-9/16”
RPS-04941-1/8” x 1-1/2”
RPS-00751” x 1-1/8” Face: 1-5/8”
RPS-00741-3/8” x 1-1/8” Face: 1-3/4”
RPS-44001-5/8” x 5/8”
RPS-44051-5/8” x 5/8”
RPS-44101-9/16” x 11/16”
RPS-44755-5/8” x 1/2”
RPS-04313-1/8” x 1/2”
UNI-BASE-074” x 5/8”
RPS-518-075-1/4” x 3/8”
RPS-02052” x 1-7/16”
RPS-02842-1/4” x 1-1/8”
RPS-02831-3/4” x 1-1/8”
RPS-02015/8” x 5/8”
RPS-01641-1/8” x 5/8”
RPS-02341-1/8” x 7/16”
RPS-02821-3/8” x 7/16”
RPS-03272-1/4” x 11/16”
100%
RPS-02983-1/2” x 1”
RPS-03612-3/8” x 11/16”
RPS-03902-5/8” x 5/8”
RPS-03762-1/4” x 5/8”
RPS-02993-5/8” x 1-1/8”
RPS-33051-1/4” x 7/16” Design Repeat: 1”
RPS-33071-3/8” x 7/8” Design Repeat: 2-1/4” RPS-3319
1-7/8” x 11/16” Design Repeat: 1-3/4”
Builder’s Mouldings Common MDF profiles produced in RPS.
See pages 686-703 for our complete line of Builder’s Mouldings