extraction arm original cr - nederman · extraction arm original cr corrosive resistant dust...

4

Extraction Arm Original CR Corrosive resistant dust extraction arm specially designed for working environments with fumes, vapors or non explosive dust Specially designed for working environments with fumes, vapours or non explosive dust. The arm has extended corrosion protection since all aluminium details including the arm are anodised. Typical workplaces are the food, pharmaceutical and chemical industries, and any other industry where an easily positioned corrosion- resistant. • Swivel allows the product to rotate 360° • Flexible in all directions and simple to position • Equipped with a damper in the hood as standard • The hood can be tilted in all directions • The product can be mounted in combination with different brackets, extension arms, on a rail system or on fixed or mobile filter equipment. Product name Extraction Arm Original CR Noise level (dB(A)) 63-75 Installation Indoor Fume temperature Max 70 C (158 F) Extraction arm diameter (mm) 160 Airflow (m3/h) 700-1000 Colour White This content is protected under copyright law, furnished for informational use only, and subject to change without notice. © Nederman Holding AB www.nederman.com 1 5/5/2018

Upload: lekhanh

Post on 20-Apr-2018

220 views

Category:

Documents

0 download

Report

Download

Embed Size (px):

TRANSCRIPT

Page 1: Extraction Arm Original CR - Nederman · Extraction Arm Original CR Corrosive resistant dust extraction arm specially designed for working ... since all aluminium details including

Extraction Arm Original CRCorrosive resistant dust extraction arm specially designed for working environments withfumes, vapors or non explosive dust

Specially designed for working environments with fumes, vapours ornon explosive dust. The arm has extended corrosion protectionsince all aluminium details including the arm are anodised. Typicalworkplaces are the food, pharmaceutical and chemical industries,and any other industry where an easily positioned corrosion-resistant.

• Swivel allows the product to rotate 360°• Flexible in all directions and simple to position• Equipped with a damper in the hood as standard• The hood can be tilted in all directions• The product can be mounted in combination with different

brackets, extension arms, on a rail system or on fixed or mobilefilter equipment.

Product name Extraction Arm Original CRNoise level (dB(A)) 63-75Installation IndoorFume temperature Max 70 C (158 F)Extraction arm diameter (mm) 160Airflow (m3/h) 700-1000Colour White

This content is protected under copyright law, furnished for informational use only, and subject to change without notice. © Nederman Holding AB

www.nederman.com 1 5/5/2018

Page 2: Extraction Arm Original CR - Nederman · Extraction Arm Original CR Corrosive resistant dust extraction arm specially designed for working ... since all aluminium details including

Extraction Arm Original CR

Description Arm length (m) Weight (kg) ModelOriginaI arm CR 2m 2 11 10532535OriginaI arm CR 3m 3 13 10532235OriginaI arm CR 4m (Vertical) 4 16 10532335OriginaI arm CR 4m (Horizontal) 4 16 10532435

This content is protected under copyright law, furnished for informational use only, and subject to change without notice. © Nederman Holding AB

www.nederman.com 2 5/5/2018

Page 3: Extraction Arm Original CR - Nederman · Extraction Arm Original CR Corrosive resistant dust extraction arm specially designed for working ... since all aluminium details including

Extraction Arm Original CR

Accessory Part No

Wall bracket for extraction arm 10550635

Wall bracket 1m 10550735

Wall bracket 2m 10550835

LED light/fan switch Original 10376922

Hose PE-EL 160/2m black 10374423

Hose PE-EL 160/3m black 10374424

Hose PE-EL 160/4m black 10374425

Hose PE-EL 160/5m black 10374426

Airflow indicator 500-4500 Pa 10375373

Airflow indicator 40-600 Pa 10375374

Transformer 230/250 V to 24 V. 75 VA. 10361560

Transformer 230/250V to 24V, 35 VA 10363189

This content is protected under copyright law, furnished for informational use only, and subject to change without notice. © Nederman Holding AB

www.nederman.com 3 5/5/2018

Page 4: Extraction Arm Original CR - Nederman · Extraction Arm Original CR Corrosive resistant dust extraction arm specially designed for working ... since all aluminium details including

Extraction Arm Original CR

X: airflow m³/h, Y: static pressure Pa, A = 4 m horizontal, B =

4 m vertical, C = 3 m, D = 2 m

This content is protected under copyright law, furnished for informational use only, and subject to change without notice. © Nederman Holding AB

www.nederman.com 4 5/5/2018

Antimicrobial Resistance Mitigation [ARM] Concept Paper · environmental factors related to global change (extreme heat events, resource extraction methods). Hall (Urban Affairs and

extraction armst-Flex/cw; telescoPic extraction arm The T-Flex/CW model has a counter weight (CW) which gives you the possibility to position the arm more precise. The maximum reach

The ARM Architecture: ARM : ARM Architecture

CR, CRI, CRN 1s, 1, 3, 5, 10, 15, 20 CR, CRN 32, 45, 64, 90, 120, 150 · CR 1s CR 1 CR 3 CR 5 CR 10 CR 15 CR 20 CR 32 CR 45 CR 64 CR 90 CR 120 CR 150 CR CRI CRN Note CRT, CRTE pumps

CR UGD21000 Series - Omron · PDF fileCR_UGD21000 series Primary arm TCP (Tool Center Point) Base plate Secondary arm Optional rotation Primary arm motor Reaction shaft long Reaction

ARM Microprocessor and ARM-Based Microcontrollers · Introduction ARM Extensions IP Cores ARM based System Summary ARM ARM ARM History ARM - Acorn RISC Machine from Acorn Computers

Embrace-2nd Floor OCT 2020 SUNDAY MONDAY ......PM Halloween Happy Hour [DR] PM Snack & Chat [CR] PM Arm Chair Travel PM One-on-One Visits Evening News and Current Events [CR] PM Halloween

Speciation of chromium through aqueous two-phase extraction of … · 2016-08-10 · AQUEOUS TWO-PHASE EXTRACTION OF COMPLEXES OF Cr 647 extraction. 29 However, the application of

COMPRESSOR DE TORNILLO - mafergasa.com · compressor de tornillo cr 64006 cr 64007 cr 64008 cr 64009 cr 64010 cr 64011 cr 64014 cr 64015 cr 64016 cr 64019 cr 64020 cr 64021 cr 64024

Extraction Material and Powder Technology...Extraction of metal s from oxides (Al, Mg, Sn, Cr, Mn, Si) Extraction of metals from Sulphide ores (Cu, Pb, Zn, Ni, Co, Ca) ... 1-The Stone

ENVIRONMENTAL CONSULTANTS€¦ · CR-121 CR-122 CR-124 CR-125 CR-126 CR-127 CR-129 CR-130 CR-128 CR-131 CR-132 CR-133 CR-134 Projection: NAD 1983 UTM Zone 14N Service Layer Credits:

P P R I M E · cr 152 cr 145 cr 138 cr 131 cr 124 cr 117 cr 151 cr 144 cr 137 cr 130 cr 123 cr 116 cr 150 cr 143 cr 136 cr 129 cr 122 cr 115 cr 149 cr 142 cr 135 cr 128 cr 121 cr

R-CR-CR-CR-CR-CR-CR-CR-CR-CR-CR-CR-CR-CR-C B2-GSB2-GSB2 ... · rrrrrr b1b1b1b1b1b1b1 b3b3b3b3b3b3 b2b2b2b2b2b2 b1b1b1b1b1b1 b2b2b2b2b2b2 222222 b3b3b3b3b3b3 b1b1b1b1b1b1 b1b1b1b1b1b1

Extraction Arm Standard - TECHNO-KAL · 2013. 11. 11. · Extraction Arm Telescopic. 37 Product availability may differ by country Kit consists of Part no. Original arm 2m + N16,

SPECIFICATIONS as standard FILTERS · Large Extraction Arm Our 2m long extration arm with its triple axis can be used in a variety of applications. The flexibility of the arm allows

Telescopic Exhaust Arm - Art. No.:91 315 · 2016. 12. 27. · » Arm keeps position due to self-supporting design » Suitable for confined spaces, as extraction arm is telescopic

Fume Extraction: Local Exhaust Ventilation (LEV) …...from the fume. Limitations The flexible extraction arm needs to be used correctly by the welder or it will not effectively capture

Mangore - Capricho... · Revisión de: Jesús Berutes R. en RE Allegro cr m Capricho arm. 12 Español Agustín Barrios Mangoré

Non-stochastic Best Arm IdentiÞcation and Hyperparameter …proceedings.mlr.press/v51/jamieson16.pdf · 2020. 8. 18. · ture extraction, and many optimization problems that ÒfeelÓ

Uas Owners Manual Xa Extraction Arm

Extraction Arm Original - westermans.com

Extraction Arm Telescopic - Westermans International Ltd...Extraction Arm Telescopic The arm is flexible in all directions and simple to position and to extend The Nederman Telescopic

Large Specalog 303.5E2 CR, 304E2 CR,305E2 CR, 305.5E2 CR

Formal Semantics Extraction from Natural Language …vv301/papers/fm19.pdfFormal Semantics Extraction from Natural Language Speciﬁcations for ARM 467 (Sect.2.1), 3 sections are utilised:

arm · 2020. 7. 29. · arm ... arm

Page 1 CHROMA METER CR-300/CR-310/ CR-321/CR-331/CR

Extraction Arm Telescopic - West Air Filtration...Extraction Arm Telescopic The arm is flexible in all directions and simple to position and to extend The Nederman Telescopic arm is

Small Collaborative Robot CR-4+A, 7+A, 7+A/L · CR-4+A, 7+A, 7+A/L Small Collaborative Robot FEATURES FANUC Robot CR-4iA, 7iA, 7iA/L are human arm sized mini-collaborative robots

Extraction arms for every type of applicationDimensions Telescopic Extraction Arm Pressure drop Telescopic Extraction Arm 7 Static pressure Pa Airflow m3/h. 8 Nederman Standard The

WALL MOUNTED WELDING FUME EXTRACTORS · Extraction arm(s), starting control(s) and fan(s) Compressed air, 90-100 psi (Statiflex 400-MS only) STATIFLEX. 200-M, 200-M Dual Arm and 400-MS

IM624 LTA 2.0 Telescopic Extraction Armpipeweldrig.com/files/weld/Fume Extractor Arm 2 .pdf · 2014-04-08 · Fume Extraction Arms K1655-1, K1655-2, K1655-3 CODE NO. K1655-1 1 †

A.R.M. Brochure 2015 - 30245:ARM 60ppA4 · 2017-04-12 · CR 16 Diameter 710mm Projection 60mm CR 18 Diameter 510mm Projection 50mm. Title: A.R.M. Brochure 2015 - 30245:ARM 60ppA4

Lincoln Medical and Mental Health Center Department of ... Michel Aslam Mon CR CR CR CR Tues 1A8 CR GYN 1A8 CR CR Wed CR 1A8 CR Opth 1A8 GYN CR CR Thu Adol 1A8 CR ENT CR CR Fri 1A8

2667 Connor Series - Precedent Furniture...2667-CL Connor Left Arm Chaise W36 D67.5 H34 2667-LL Connor Left Arm Loveseat W64 D40 H34 2667-CR Connor Right Arm Chaise W36 D67.5 H34 2667-S1

extraction armsworkbenches, stationary and mobile filtration units. Extraction arms are also part of the category source extraction, as an extraction arm can be placed in a certain