external chambers
TRANSCRIPT
EXTERNAL CHAMBERS
Index
1. EXCS SERIES - EXTERNAL CHAMBERS
1.1 Chamber Design ...011.2 Standard Design Flanges & Welds ...021.3 Ordering information ...031.4 Drawings with Specification ...04
1. EXTERNAL CHAMBERS – EXCS
External Chambers are used for mounting the Shridhan / other range of process level instruments to a vessel. Externally mounting an instrument in a chamber means it can be isolated for routine maintenance while keeping the plant operational. It is also useful for in-tank restrictions that do not allow mounting of the instrument in a vessel.
1.1 CHAMBER DESIGN :
Weld Neck Flanges And Full Penetration Welds are in accordance with EN ISO 15614-1:2004, and ASME Boiler and Pressure Vessel Code Section IX. All welders are qualified to EN 287-1:2004 and ASME Boiler and Pressure Vessel Code Section IX. All construction materials have full traceability. Also optional in accordance with the EN 10204 type 3.1 certificate.Hydrostatic tests performed as standard.
There are two designs available: Standard Design and T-piece Design.
FEATURES :
• Global quality assured design and manufacturing • Designed to the ASME B31.3 Process Piping Code. • Conforms to Pressure Equipment Directive (PED) 2014/68/EU for liquids in Groups 1 and 2 • Industry standard weld neck flanges are used throughout, Increasing safety by minimizing stress levels and the number of welds. All welds are full penetration to increase integrity and Reduce corrosion • Optimized for use with Guided Wave Radar, Hydrostatic, Float based and Magnetostrictive Level Transmitters, Displacer Level Switches and Transmitters, Vertical Float Level Switches, Horizontal Float Level Switches. • Drain options for even easier maintenance of the instrument. Optional vent allows gas in the upper zone above the liquid to be vented off.
Full Penetration Welds
Weld Neck Flanges
Full Penetration Welds
Full Penetration Welds
Weld Neck Flanges
Page 1
Optional Vent (Flanged Threaded or Socket Weld)
Optional Vent (Flanged Threaded or Socket Weld)
Optional Vent (Flanged Threaded or Socket Weld)
Optional Vent (Flanged Threaded or Socket Weld)
Drain (Flanged Threaded or Socket Weld)
Drain (Flanged Threaded or Socket Weld)
Drain (Flanged Threaded or Socket Weld)
Drain (Flanged Threaded or Socket Weld)
Instrument Connection (Threaded)
Instrument Connection (Threaded)
Process Connection (Flanged Threaded or Socket Weld)
Process Connection (Flanged Threaded or Socket Weld)
Process Connection (Flanged Threaded or Socket Weld)
Process Connection (Flanged Threaded or Socket Weld)
2 in(50 mm)
2 in(50 mm) 2 in(50 mm)
2 in(50 mm)
1.2 STANDARD DESIGN FLANGES AND WELDS
Process connectionsareweldeddirectlyonto thechamberbody,minimizing thenumberofwelds forincreased safety. ,
T-PIECE FLANGE AND WELDS
Usedwhena1-in.(40mm)or2-in.(50mm)processconnectionisrequiredona3-in.(80mm)chamber.Unequal T’s are used so that the larger process connections can fit on the smaller chamber body.
STANDARD SIDE - SIDE CHAMBER DESIGN
STANDARD SIDE - BOTTOM CHAMBER DESIGN
Page 2
1.2 STANDARD DESIGN FLANGES AND WELDS
Process connections are welded directly onto the chamber body, minimizing the number of welds for increased safety.
T-PIECE FLANGE AND WELDS
Used when a 1-in. (40 mm) or 2-in. (50 mm) process connection is required on a 3-in. (80 mm) chamber.Unequal T’s are used so that the larger process connections can fit on the smaller chamber body.
STANDARD SIDE - SIDE CHAMBER DESIGN
Page 2
1.3 ORDERING INFORMATION FOR EXTERNAL CHAMBERS
SPECIFY PART NO. EXCS
EXCS
Example EXCS
INSTRUMENT :1: Guided Wave Radar Level Transmitter2: Non-Contact Radar Level Transmitter3: Vertical Float Level Switches4: Magnetostrictive Level Transmitter5: Displacer Level Switch / Transmitter6: Bridle Arrangement with MLI7: Others
1
VENT:1) ½”2) ¾” 3) 1”4) Others A) RF FlangeB) RTJ FlangeC) NPT ThreadD) BSP Thread
11
DRAIN :5) ½”6) ¾” 7) 1”8) Others A) RF FlangeB) RTJ FlangeC) NPT ThreadD) BSP Thread
12
TYPE :1) RF Flange 2) RTJ Flange 3) NPT Thread 4) BSP Thread 5) Socket Weld 6) Others
9
SPECIAL OPTIONS :1) NACE MR0175 Compliance and Material Certificate2) PED 2014/68/EU Certification 3) IBR 4) EN 10204 3.1 Certificate5) None
13
TESTING :1) Hydrostatic Pressure Test Certificate ( Standard ) 2) Dye-Penetrant Test 3) Radiography Level 1 / Level 24) Others
14
CHAMBER RATING :1: Class 150 Flange ASME B16.52: Class 300 Flange ASME B16.53: Class 600 Flange ASME B16.54: Class 900 Flange ASME B16.55: PN16 Flange6: PN 40 Flange7: PN 64 Flange8: PN 100 Flange9: PN 160 Flange10.Others
5
RATING :1) Class 1502) Class 3003) Class 6004) Class 9005) PN 166) PN 407) PN 648) PN 1009) PN 16010) Others
10
MATERIAL OF CONSTRUCTION :1: Carbon Steel2: Stainless Steel 3043: Stainless Steel 3164: Others ( Please Specify)
3
PROCESS CONNECTION: SIZE :1) 25mm2) 40mm3) 50mm4) Others
8
INSTRUMENT CONNECTION :1: RF Flange2: RTJ Flange3: Threaded (Female) ( NPT / BSP )4.Others
6
GASKET / SEALING :1 : Flat Ring2 : Spiral Wound ( SS316 )3 : Ring Joint ( SS316)4. Others
7
CHAMBER SIZE :1 : DN 502 : DN 653 : DN 804 : DN 1005. Others
4
DESIGN :1: Standard2: T-Piece
2
1 2 3 4 5 6 7 8 9 10 11 12 13 14
1 1 2 1 3 1 2 1 1 3 1A 5A 3 1
Page 3
2”NB Chamber,2”150#Flange
1.NACE MR0175 Compliance and Material Certificate
5.None
2.PED 2014/68/EU certification3.IBR
6.Others
4.EN 10204 3.1 Certificate
Special Options:
1.Hydrostatic Pressure test2.Dye-Penetration test3.Radiography Level 1/Level 24.Others
Testing Options:
1. ANSI B16.5 Standard (½”NB,1” NB,1 ½”NB,2”NB)2. BS Standard (½”NB,1” NB,1 ½”NB,2”NB)3. DIN Standard (½”NB,1” NB,1 ½”NB,2”NB)
Process Connection Options:
1. BSP : (½”,1”,1 ½”,2”) Male/Female2. NPT : (½”,1”,1 ½”,2”) Male/Female3. Weldolet Connection4. Sockolet Connection
Threaded Option:
1. Stainless Steel 304/316/316L
5. Inconel 625
2. Titanium
6. Inconel 825
3. Hastelloy C-276
7. Other Non Magnetic Alloys
4. Monel 400
Material Options :
1. Ball Valve2. Gate Valve3. Needle Valve
Valve option for Vent And Drain :
1. Stainless Steel 304/316/316L2. Carbon Steel3. PTFE/PVDF
Material Option For Valve:
1 Guided Wave Radar Level Transmitter
5.Displacer Level Switch/Transmitter
2.Non-Contact Radar Level Transmitter
6.Bridle Arragement with MLI.
3.Vertical Float Level Switch
7.Others
4.Magnetostrictive Level Transmitter
Instrument Options:
VentConnection
ProcessConnection
Chamber
C-C
Dis
tanc
eA
B
DrainConnection
Chamber Flange
ConnectingPipe
Tota
l Len
gth(
C-C
+A+B
)
Name plate
Gasket
SHRIDHAN Automation
www.shridhan.com
EXTERNAL CHAMBER
Model No: ___________________
Serial No: ___________________
MOC:
___________________
Max. op. p ressure: ________________ bar
Max. op. temp: _ ________________ C
Process Connection: __________________
Centre to Centre: _ _______________ mm
Specific Gravity: _ __________________
Display type: ___________________
Transmitter: ___________________
Year of Manufacture: ________________
Made in India
TM
xxxx
Fasteners
Page 4
2 ½”NB Chamber,2½”300#Flange
ProcessConnection
ConnectingPipe
C-C
Dis
tanc
eA
B
Tota
l Len
gth
(CC
+A+B
)
VentConnection
Chamber
Name plate
ChamberFlange
Gasket
DrainConnection
SHRIDHAN Automation
www.shridhan.com
EXTERNAL CHAMBER
Model No: ___________________
Serial No: ___________________
MOC: ___________________
Max. op. pressure:________________ ba r
Max. op. temp: _________________ C
Process Connection: __________________
Centre to Centre: ________________ mm
Specific Gravity: ___________________
Display type: ___________________
Transmitter: ___________________
Year of Manufacture: ________________
Made in India
TM
xxxx
1.NACE MR0175 Compliance and Material Certificate
5.None
2.PED 2014/68/EU Certification3.IBR
6.Others
4.EN 10204 3.1 Certificate
Special Options:
1.Hydrostatic Pressure test.2.Dye-Penetration test3.Radiography Level 1/Level 24.Others
Testing Options:
1. ANSI B16.5 Standard (½”NB,1” NB,1 ½”NB,2”NB)2. BS Standard (½”NB,1” NB,1 ½”NB,2”NB)3. DIN Standard (½”NB,1” NB,1 ½”NB,2”NB)
Process Connection Options:
1. BSP : (½”,1”,1 ½”,2”) Male/Female2. NPT : (½”,1”,1 ½”,2”) Male/Female3. Weldolet Connection4. Sockolet Connection
Threaded Option:
1. Stainless Steel 304/316/316L
5. Inconel 625
2. Titanium
6. Inconel 825
3. Hastelloy C-276
7. Other Non Magnetic Alloys
4. Monel 400
Material Options :
1. Ball Valve2. Gate Valve3. Needle Valve
Valve option for Vent And Drain :
1. Stainless Steel 304/316/316L2. Carbon Steel3. PTFE/PVDF
Material Option For Valve:
1 Guided Wave Radar Level Transmitter
5.Displacer Level Switch/Transmitter
2.Non-Contact Radar Level Transmitter
6.Bridle Arragement with MLI.
3.Vertical Float Level Switch
7.Others
4.Magnetostrictive Level Transmitter
Instrument Options:
3”NB Chamber,3”300#Flange
ProcessConnection
C-C
Dis
tanc
eA
B
Toat
al L
engt
h (C
-C+A
+B)
Chamber
ConnectingPipe
Name plate
DrainConnection
VentConnection
Chamber Flange Gasket
SHRIDHAN Automation
www.shridhan.com
EXTERNAL CHAMBER
Model No: ___________________
Serial No: ___________________
MOC: ___________________
Max. op. pressure:________________ ba r
Max. op. temp: _________________ C
Process Connection: __________________
Centre to Centre: ________________ mm
Specific Gravity: ___________________
Display type: ___________________
Transmitter: ___________________
Year of Manufacture: _______________ _
Made in India
TM
xxxx
Fasteners
1.NACE MR0175 Compliance and Material Certificate
5.None
2.PED 2014/68/EU Certification3.IBR
6.Others
4.EN 10204 3.1 Certificate
Special Options:
1.Hydrostatic Pressure test.2.Dye-Penetration test3.Radiography Level 1/Level 24.Others
Testing Options:
1. ANSI B16.5 Standard (½”NB,1” NB,1 ½”NB,2”NB)2. BS Standard (½”NB,1” NB,1 ½”NB,2”NB)3. DIN Standard (½”NB,1” NB,1 ½”NB,2”NB)
Process Connection Options:
1. BSP : (½”,1”,1 ½”,2”) Male/Female2. NPT : (½”,1”,1 ½”,2”) Male/Female3. Weldolet Connection4. Sockolet Connection
Threaded Option:
1. Stainless Steel 304/316/316L
5. Inconel 625
2. Titanium
6. Inconel 825
3. Hastelloy C-276
7. Other Non Magnetic Alloys
4. Monel 400
Material Options :
1. Ball Valve2. Gate Valve3. Needle Valve
Valve option for Vent And Drain :
1. Stainless Steel 304/316/316L2. Carbon Steel3. PTFE/PVDF
Material Option For Valve:
1 Guided Wave Radar Level Transmitter
5.Displacer Level Switch/Transmitter
2.Non-Contact Radar Level Transmitter
6.Bridle Arragement with MLI.
3.Vertical Float Level Switch
7.Others
4.Magnetostrictive Level Transmitter
Instrument Options:
Page 5
2”NB Chamber,2”600#Flange
VentConnection
ProcessConnection
Chamber
C-C
Dis
tanc
eA
B
DrainConnection
ChamberFlange
ConnectingPipe
Tota
l Len
gth(
C-C
+A+B
)
Name plate
Gasket
SHRIDHAN Automation
www.shridhan.com
EXTERNAL CHAMBER
Model No: ___________________
Serial No: ___________________
MOC: ___________________
Max. op. pressure: ________________ ba r
Max. op. temp: _________________ C
Process Connection: __________________
Centre to Centre: ________________ mm
Specific Gravity: ___________________
Display type: ___________________
Transmitter: ___________________
Year of Manufacture: ________________
Made in India
TM
xxxx
Fasteners
1.NACE MR0175 Compliance and Material Certificate
5.None
2.PED 2014/68/EU Certification3.IBR
6.Others
4.EN 10204 3.1 Certificate
Special Options:
1.Hydrostatic Pressure test.2.Dye-Penetration test3.Radiography Level 1/Level 24.Others
Testing Options:
1. ANSI B16.5 Standard (½”NB,1” NB,1 ½”NB,2”NB)2. BS Standard (½”NB,1” NB,1 ½”NB,2”NB)3. DIN Standard (½”NB,1” NB,1 ½”NB,2”NB)
Process Connection Options:
1. BSP : (½”,1”,1 ½”,2”) Male/Female2. NPT : (½”,1”,1 ½”,2”) Male/Female3. Weldolet Connection4. Sockolet Connection
Threaded Option:
1. Stainless Steel 304/316/316L
5. Inconel 625
2. Titanium
6. Inconel 825
3. Hastelloy C-276
7. Other Non Magnetic Alloys
4. Monel 400
Material Options :
1. Ball Valve2. Gate Valve3. Needle Valve
Valve option for Vent And Drain :
1. Stainless Steel 304/316/316L2. Carbon Steel3. PTFE/PVDF
Material Option For Valve:
1 Guided Wave Radar Level Transmitter
5.Displacer Level Switch/Transmitter
2.Non-Contact Radar Level Transmitter
6.Bridle Arragement with MLI.
3.Vertical Float Level Switch
7.Others
4.Magnetostrictive Level Transmitter
Instrument Options:
4”NB Chamber,4”600#Flange
DrainConnection
ProcessConnection
ConnectingPipe
VentConnection
Chamber
Name plate
C-C
Dis
tanc
e
Tota
l Len
gth
(CC
+A+B
)
B
Gasket
SHRIDHAN Automation
www.shridhan.com
EXTERNAL CHAMBER
Model No: ___________________
Serial No: ___________________
MOC: ___________________
Max. op. pressure: ________________ ba r
Max. op. temp: _ ________________ C
Process Connection: __________________
Centre to Centre: _ _______________ mm
Specific Gravity: ___________________
Display type: ___________________
Transmitter: _ __________________
Year of Manufacture: ________________
Made in India
TM
xxxx
A
1.NACE MR0175 Compliance and Material Certificate
5.None
2.PED 2014/68/EU Certification3.IBR
6.Others
4.EN 10204 3.1 Certificate
Special Options:
1.Hydrostatic Pressure test.2.Dye-Penetration test3.Radiography Level 1/Level 24.Others
Testing Options:
1. ANSI B16.5 Standard (½”NB,1” NB,1 ½”NB,2”NB)2. BS Standard (½”NB,1” NB,1 ½”NB,2”NB)3. DIN Standard (½”NB,1” NB,1 ½”NB,2”NB)
Process Connection Options:
1. BSP : (½”,1”,1 ½”,2”) Male/Female2. NPT : (½”,1”,1 ½”,2”) Male/Female3. Weldolet Connection4. Sockolet Connection
Threaded Option:
1. Stainless Steel 304/316/316L
5. Inconel 625
2. Titanium
6. Inconel 825
3. Hastelloy C-276
7. Other Non Magnetic Alloys
4. Monel 400
Material Options :
1. Ball Valve2. Gate Valve3. Needle Valve
Valve option for Vent And Drain :
1. Stainless Steel 304/316/316L2. Carbon Steel3. PTFE/PVDF
Material Option For Valve:
1 Guided Wave Radar Level Transmitter
5.Displacer Level Switch/Transmitter
2.Non-Contact Radar Level Transmitter
6.Bridle Arragement with MLI.
3.Vertical Float Level Switch
7.Others
4.Magnetostrictive Level Transmitter
Instrument Options:
Page 6
2 ½”NB Chamber,2 ½”900#Flange
ProcessConnection
ConnectingPipe
C-C
Dis
tanc
eA
B
Tota
l Len
gth
(CC
+A+B
)
VentConnection
Chamber
SHRIDHAN Autom ation
www.shridhan.com
EXTERN AL CHAMBER
Model No: ___________________
Serial No: ___________________
MOC:
___________________
Max. op. pressure: ________________ bar
Max. op. temp: _________________ C
Process Connection: __________________
Centre to Centre: ________________ mm
Specific Gravity: ___________________
Display type: ___________________
Transmitter: ___________________
Year of Manufacture: ________________
Made in India
TM
xxxxName plate
ChamberFlange
Gasket
DrainConnection
Fasteners
1.NACE MR0175 Compliance and Material Certificate
5.None
2.PED 2014/68/EU Certification3.IBR
6.Others
4.EN 10204 3.1 Certificate
Special Options:
1.Hydrostatic Pressure test.2.Dye-Penetration test3.Radiography Level 1/Level 24.Others
Testing Options:
1. ANSI B16.5 Standard (½”NB,1” NB,1 ½”NB,2”NB)2. BS Standard (½”NB,1” NB,1 ½”NB,2”NB)3. DIN Standard (½”NB,1” NB,1 ½”NB,2”NB)
Process Connection Options:
1. BSP : (½”,1”,1 ½”,2”) Male/Female2. NPT : (½”,1”,1 ½”,2”) Male/Female3. Weldolet Connection4. Sockolet Connection
Threaded Option:
1. Stainless Steel 304/316/316L
5. Inconel 625
2. Titanium
6. Inconel 825
3. Hastelloy C-276
7. Other Non Magnetic Alloys
4. Monel 400
Material Options :
1. Ball Valve2. Gate Valve3. Needle Valve
Valve option for Vent And Drain :
1. Stainless Steel 304/316/316L2. Carbon Steel3. PTFE/PVDF
Material Option For Valve:
1 Guided Wave Radar Level Transmitter
5.Displacer Level Switch/Transmitter
2.Non-Contact Radar Level Transmitter
6.Bridle Arragement with MLI.
3.Vertical Float Level Switch
7.Others
4.Magnetostrictive Level Transmitter
Instrument Options:
4”NB Chamber,4”900#Flange
DrainConnection
ProcessConnection
ConnectingPipe
VentConnection
Chamber
SHRIDHAN Autom ation
www.shridhan.com
EXTERN AL CHAMBE R
Model No: ___________________
Serial No: ___________________
MOC:
___________________
Max. op. pressure: ________________ bar
Max. op. temp: _ ________________ C
Process Connection: __________________
Centre to Centre: ________________ mm
Specific Gravity: ___________________
Display type: ___________________
Transmitter: ___________________
Year of Manufacture: ________________
Made in India
TM
xxxx Name plate
C-C
Dis
tanc
e
Tota
l Len
gth
(CC
+A+B
)
BA
GasketChamberFlange
Fasteners
1.NACE MR0175 Compliance and Material Certificate
5.None
2.PED 2014/68/EU Certification3.IBR
6.Others
4.EN 10204 3.1 Certificate
Special Options:
1.Hydrostatic Pressure test.2.Dye-Penetration test3.Radiography Level 1/Level 24.Others
Testing Options:
1. ANSI B16.5 Standard (½”NB,1” NB,1 ½”NB,2”NB)2. BS Standard (½”NB,1” NB,1 ½”NB,2”NB)3. DIN Standard (½”NB,1” NB,1 ½”NB,2”NB)
Process Connection Options:
1. BSP : (½”,1”,1 ½”,2”) Male/Female2. NPT : (½”,1”,1 ½”,2”) Male/Female3. Weldolet Connection4. Sockolet Connection
Threaded Option:
1. Stainless Steel 304/316/316L
5. Inconel 625
2. Titanium
6. Inconel 825
3. Hastelloy C-276
7. Other Non Magnetic Alloys
4. Monel 400
Material Options :
1. Ball Valve2. Gate Valve3. Needle Valve
Valve option for Vent And Drain :
1. Stainless Steel 304/316/316L2. Carbon Steel3. PTFE/PVDF
Material Option For Valve:
1 Guided Wave Radar Level Transmitter
5.Displacer Level Switch/Transmitter
2.Non-Contact Radar Level Transmitter
6.Bridle Arragement with MLI.
3.Vertical Float Level Switch
7.Others
4.Magnetostrictive Level Transmitter
Instrument Options:
Page 7
2”NB Chamber,2”1500#Flange
VentConnection
Chamber
C-C
Dis
tanc
eA
B
DrainConnection
ChamberFlange
ConnectingPipe
Tota
l Len
gth(
C-C
+A+B
)
SHRIDHAN Automatio n
www.shridhan.com
EXTERNAL CHAMBER
Model No: ___________________
Serial No: ___________________
MOC:
___________________
Max. op. p ressure: ________________ bar
Max. op. temp: _ ________________ C
Process Connection: __________________
Centre to Centre: _ _______________ mm
Specific Gravity: _ __________________
Display type: ___________________
Transmitter: ___________________
Year of Manufacture: ________________
Made in India
TM
xxxxName plate
Gasket
Fasteners
1.NACE MR0175 Compliance and Material Certificate
5.None
2.PED 2014/68/EU Certification3.IBR
6.Others
4.EN 10204 3.1 Certificate
Special Options:
1.Hydrostatic Pressure test.2.Dye-Penetration test3.Radiography Level 1/Level 24.Others
Testing Options:
1. ANSI B16.5 Standard (½”NB,1” NB,1 ½”NB,2”NB)2. BS Standard (½”NB,1” NB,1 ½”NB,2”NB)3. DIN Standard (½”NB,1” NB,1 ½”NB,2”NB)
Process Connection Options:
1. BSP : (½”,1”,1 ½”,2”) Male/Female2. NPT : (½”,1”,1 ½”,2”) Male/Female3. Weldolet Connection4. Sockolet Connection
Threaded Option:
1. Stainless Steel 304/316/316L
5. Inconel 625
2. Titanium
6. Inconel 825
3. Hastelloy C-276
7. Other Non Magnetic Alloys
4. Monel 400
Material Options :
1. Ball Valve2. Gate Valve3. Needle Valve
Valve option for Vent And Drain :
1. Stainless Steel 304/316/316L2. Carbon Steel3. PTFE/PVDF
Material Option For Valve:
1 Guided Wave Radar Level Transmitter
5.Displacer Level Switch/Transmitter
2.Non-Contact Radar Level Transmitter
6.Bridle Arragement with MLI.
3.Vertical Float Level Switch
7.Others
4.Magnetostrictive Level Transmitter
Instrument Options:
2 ½”NB Chamber, 2 ½” 1500#Flange
ProcessConnection
100.0
ConnectingPipe
C-C
Dis
tanc
eA
B
Tota
l Len
gth
(CC
+A+B
)
VentConnection
Chamber
SHRIDHAN Automatio n
www.shridhan.com
EXTERNAL CHAMBER
Model No: ___________________
Serial No: ___________________
MOC:
___________________
Max. op. p ressure: ________________ bar
Max. op. temp: _________________ C
Process Connection: __________________
Centre to Centre: ________________ mm
Specific Gravity: ___________________
Display type: ___________________
Transmitter: ___________________
Year of Manufacture: ________________
Made in India
TM
xxxx
Name plate
ChamberFlange Gasket
DrainConnection
Fasteners
1.NACE MR0175 Compliance and Material Certificate
5.None
2.PED 2014/68/EU Certification3.IBR
6.Others
4.EN 10204 3.1 Certificate
Special Options:
1.Hydrostatic Pressure test.2.Dye-Penetration test3.Radiography Level 1/Level 24.Others
Testing Options:
1. ANSI B16.5 Standard (½”NB,1” NB,1 ½”NB,2”NB)2. BS Standard (½”NB,1” NB,1 ½”NB,2”NB)3. DIN Standard (½”NB,1” NB,1 ½”NB,2”NB)
Process Connection Options:
1. BSP : (½”,1”,1 ½”,2”) Male/Female2. NPT : (½”,1”,1 ½”,2”) Male/Female3. Weldolet Connection4. Sockolet Connection
Threaded Option:
1. Stainless Steel 304/316/316L
5. Inconel 625
2. Titanium
6. Inconel 825
3. Hastelloy C-276
7. Other Non Magnetic Alloys
4. Monel 400
Material Options :
1. Ball Valve2. Gate Valve3. Needle Valve
Valve option for Vent And Drain :
1. Stainless Steel 304/316/316L2. Carbon Steel3. PTFE/PVDF
Material Option For Valve:
1 Guided Wave Radar Level Transmitter
5.Displacer Level Switch/Transmitter
2.Non-Contact Radar Level Transmitter
6.Bridle Arragement with MLI.
3.Vertical Float Level Switch
7.Others
4.Magnetostrictive Level Transmitter
Instrument Options:
Page 8
4”NB Chamber,4”900#Flange
DrainConnection
ProcessConnection
ConnectingPipe
VentConnection
SHRIDHAN Automatio n
www.shridhan.com
EXTERNAL CHAMBER
Model No: ___________________
Serial No: ___________________
MOC:
___________________
Max. op. p ressure: ________________ bar
Max. op. temp: _________________ C
Process Connection: __________________
Centre to Centre: ________________ mm
Specific Gravity: ___________________
Display type: ___________________
Transmitter: ___________________
Year of Manufacture: ________________
Made in India
TM
xxxx
C-C
Dis
tanc
e
Tota
l Len
gth
(CC
+A+B
)
BA
Gasket
Chamber
Name Plate
1.NACE MR0175 Compliance and Material Certificate
5.None
2.PED 2014/68/EU Certification3.IBR
6.Others
4.EN 10204 3.1 Certificate
Special Options:
1.Hydrostatic Pressure test.2.Dye-Penetration test3.Radiography Level 1/Level 24.Others
Testing Options:
1. ANSI B16.5 Standard (½”NB,1” NB,1 ½”NB,2”NB)2. BS Standard (½”NB,1” NB,1 ½”NB,2”NB)3. DIN Standard (½”NB,1” NB,1 ½”NB,2”NB)
Process Connection Options:
1. BSP : (½”,1”,1 ½”,2”) Male/Female2. NPT : (½”,1”,1 ½”,2”) Male/Female3. Weldolet Connection4. Sockolet Connection
Threaded Option:
1. Stainless Steel 304/316/316L
5. Inconel 625
2. Titanium
6. Inconel 825
3. Hastelloy C-276
7. Other Non Magnetic Alloys
4. Monel 400
Material Options :
1. Ball Valve2. Gate Valve3. Needle Valve
Valve option for Vent And Drain :
1. Stainless Steel 304/316/316L2. Carbon Steel3. PTFE/PVDF
Material Option For Valve:
1 Guided Wave Radar Level Transmitter
5.Displacer Level Switch/Transmitter
2.Non-Contact Radar Level Transmitter
6.Bridle Arragement with MLI.
3.Vertical Float Level Switch
7.Others
4.Magnetostrictive Level Transmitter
Instrument Options:
1. ANSI B16.5 Standard (½”NB,1” NB,1 ½”NB,2”NB)
BSP : (½”,1”,1 ½”,2”) Male/Female
1. PP
1. Ball Valve
2. BS Standard (½”NB,1” NB,1 ½”NB,2”NB)
NPT : (½”,1”,1 ½”,2”) Male/Female
2.PVC
2. Gate Valve
3. DIN Standard (½”NB,1” NB,1 ½”NB,2”NB)
3. PVDF
3. Needle Valve
Process Connection Options:
Threaded Option:
Material Options :
Valve option for Vent And Drain :
PVC Chambers
PTFE lined External Chambers
AB
Chamber Flange
Chamber
Drain Connection
Process Connection
Tota
l Len
gth
C-C
Dis
tanc
e
Page 9
Special Designs
1.NACE MR0175 Compliance and Material Certificate
5.None
2.PED 2014/68/EU Certification3.IBR
6.Others
4.EN 10204 3.1 Certificate
Special Options:
1.Hydrostatic Pressure test.2.Dye-Penetration test3.Radiography Level 1/Level 24.Others
Testing Options:
1. ANSI B16.5 Standard (½”NB,1” NB,1 ½”NB,2”NB)2. BS Standard (½”NB,1” NB,1 ½”NB,2”NB)3. DIN Standard (½”NB,1” NB,1 ½”NB,2”NB)
Process Connection Options:
1. Stainless Steel 304/316/316L
5. Inconel 625
2. Titanium
6. Inconel 825
3. Hastelloy C-276
7. Other Non Magnetic Alloys
4. Monel 400
Material Options :
1. Ball Valve2. Gate Valve3. Needle Valve
Valve option for Vent And Drain :
1. Stainless Steel 304/316/316L2. Carbon Steel3. PTFE/PVDF
Material Option For Valve:
1 Guided Wave Radar Level Transmitter
5.Displacer Level Switch/Transmitter
2.Non-Contact Radar Level Transmitter
6.Bridle Arragement with MLI.
3.Vertical Float Level Switch
7.Others
4.Magnetostrictive Level Transmitter
Instrument Options:
Chamber Pipe
Detail A-A
Pipe
Weld
PTFE Lining
PTFE Lined Chamber
Vent
Drain
MAGNETIC LEVEL INDICATOR
Model No :
Tag No :
Serial No :
MOC :
Max.Pressure :
Max.Temperature :
Process Conn. :
C to C :
Float :
S. G :
Display type :
Switches :
Transmitter :
Made in India
SHRIDHANAutomate your Field
R
www.shridhan.com
Mea
surin
g R
ange
`A'
Float Level Transmitter mounted in a chamber
Magnetosrictive Transmitter Mounted in a chamber
Page 10
1.NACE MR0175 Compliance and Material Certificate
5.None
2.PED 2014/68/EU Certification3.IBR
6.Others
4.EN 10204 3.1 Certificate
Special Options:
1.Hydrostatic Pressure test.2.Dye-Penetration test3.Radiography Level 1/Level 24.Others
Testing Options:
1. ANSI B16.5 Standard (½”NB,1” NB,1 ½”NB,2”NB)2. BS Standard (½”NB,1” NB,1 ½”NB,2”NB)3. DIN Standard (½”NB,1” NB,1 ½”NB,2”NB)
Process Connection Options:
1. BSP : (½”,1”,1 ½”,2”) Male/Female2. NPT : (½”,1”,1 ½”,2”) Male/Female3. Weldolet Connection4. Sockolet Connection
Threaded Option:
1. Stainless Steel 304/316/316L
5. Inconel 625
2. Titanium
6. Inconel 825
3. Hastelloy C-276
7. Other Non Magnetic Alloys
4. Monel 400
Material Options :
1. Ball Valve2. Gate Valve3. Needle Valve
Valve option for Vent And Drain :
1. Stainless Steel 304/316/316L2. Carbon Steel3. PTFE/PVDF
Material Option For Valve:
1 Guided Wave Radar Level Transmitter
5.Displacer Level Switch/Transmitter
2.Non-Contact Radar Level Transmitter
6.Bridle Arragement with MLI.
3.Vertical Float Level Switch
7.Others
4.Magnetostrictive Level Transmitter
Instrument Options:
1.NACE MR0175 Compliance and Material Certificate
5.None
2.PED 2014/68/EU Certification3.IBR
6.Others
4.EN 10204 3.1 Certificate
Special Options:
1.Hydrostatic Pressure test.2.Dye-Penetration test3.Radiography Level 1/Level 24.Others
Testing Options:
1. ANSI B16.5 Standard (½”NB,1” NB,1 ½”NB,2”NB)2. BS Standard (½”NB,1” NB,1 ½”NB,2”NB)3. DIN Standard (½”NB,1” NB,1 ½”NB,2”NB)
Process Connection Options:
1. BSP : (½”,1”,1 ½”,2”) Male/Female2. NPT : (½”,1”,1 ½”,2”) Male/Female3. Weldolet Connection4. Sockolet Connection
Threaded Option:
1. Stainless Steel 304/316/316L
5. Inconel 625
2. Titanium
6. Inconel 825
3. Hastelloy C-276
7. Other Non Magnetic Alloys
4. Monel 400
Material Options :
1. Ball Valve2. Gate Valve3. Needle Valve
Valve option for Vent And Drain :
1. Stainless Steel 304/316/316L2. Carbon Steel3. PTFE/PVDF
Material Option For Valve:
1 Guided Wave Radar Level Transmitter
5.Displacer Level Switch/Transmitter
2.Non-Contact Radar Level Transmitter
6.Bridle Arragement with MLI.
3.Vertical Float Level Switch
7.Others
4.Magnetostrictive Level Transmitter
Instrument Options:
Chamber Pipe
FLX in an External Chamber
Drain
Vent
EXTERNAL CHAMBER
Model No :
Tag No :
Serial No : MOC :
Max.Op.Pr. :
Max.Op.Temp.:Process Conn. :
C to C :
Float : S. G :
Display type :
Switches :
'X'mitter :
Made in India CE 1128
SHRIDHAN AutomationTM
www.shridhan.com
FerruleTransmitter
A
A
Transmitter
MLX in an External Chamber
Chamber Pipe
Drain
Vent
EXTERNAL CHAMBER
Model No :
Tag No :
Serial No : MOC :
Max.Op.Pr. :
Max.Op.Temp.:
Process Conn. :
C to C :
Float :
S. G :
Display type :
Switches :
'X'mitter :
Made in India CE 1128
SHRIDHAN AutomationTM
www.shridhan.com
A
A
External Chambers for taller tanks
Page 11
1.NACE MR0175 Compliance and Material Certificate
5.None
2.PED 2014/68/EU Certification3.IBR
6.Others
4.EN 10204 3.1 Certificate
Special Options:
1.Hydrostatic Pressure test.2.Dye-Penetration test3.Radiography Level 1/Level 24.Others
Testing Options:
1. ANSI B16.5 Standard (½”NB,1” NB,1 ½”NB,2”NB)2. BS Standard (½”NB,1” NB,1 ½”NB,2”NB)3. DIN Standard (½”NB,1” NB,1 ½”NB,2”NB)
Process Connection Options:
1. BSP : (½”,1”,1 ½”,2”) Male/Female2. NPT : (½”,1”,1 ½”,2”) Male/Female3. Weldolet Connection4. Sockolet Connection
Threaded Option:
1. Stainless Steel 304/316/316L
5. Inconel 625
2. Titanium
6. Inconel 825
3. Hastelloy C-276
7. Other Non Magnetic Alloys
4. Monel 400
Material Options :
1. Ball Valve2. Gate Valve3. Needle Valve
Valve option for Vent And Drain :
1. Stainless Steel 304/316/316L2. Carbon Steel3. PTFE/PVDF
Material Option For Valve:
1 Guided Wave Radar Level Transmitter
5.Displacer Level Switch/Transmitter
2.Non-Contact Radar Level Transmitter
6.Bridle Arragement with MLI.
3.Vertical Float Level Switch
7.Others
4.Magnetostrictive Level Transmitter
Instrument Options:
Support Plate
Connecting Flanges
Fasteners forConnection Flanges
C-C
Dis
tanc
e
External Chamber Design for Taller Tanks
Drain
Vent
EXTERNAL CHAMBER
Model No :
Tag No :
Serial No :
MOC :Max.Op.Pr. :
Max.Op.Temp.:
Process Conn. :
C to C :
Float : S. G :
Display type :
Switches :
'X'mitter :
Made in India CE 1128
SHRIDHAN AutomationTM
www.shridhan.com
External Chamber with Bent Process connection
External Chambers with extended process connection
Chamber Flange
Fasteners
Chamber
EXTERNAL CHAMBER
Model No: ___________________Serial No: ___________________MOC: ___________________Max. op. pressure: ________________ barMax. op. temp: _________________ CProcess Connection: __________________Centre to Centre: ________________ mmSpecific Gravity: ___________________ Display type: ___________________Transmitter: ___________________Year of Manufacture: ________________
Made in India xxxx Name plate
Drain Connection
Vent Connection
Tota
l Len
ght (
C-C+
A+B
)
100.0
AB
Gasket
Process Connection
Connecting Pipe
C-C
Dist
ance
Chamber Flange
Fasteners
Chamber
EXTERNAL CHAMBER
Model No: ___________________Serial No: ___________________MOC: ___________________Max. op. pressure: ________________ barMax. op. temp: _________________ CProcess Connection: __________________Centre to Centre: ________________ mmSpecific Gravity: ___________________ Display type: ___________________Transmitter: ___________________Year of Manufacture: ________________
Made in India xxxx Name plate
Drain Connection
Vent Connection
Tota
l Len
ght (
C-C+
A+B
)
C
AB
Support
C-C
Dis
tan
ce
Process Connection
Connecting Pipe
1.NACE MR0175 Compliance and Material Certificate
5.None
2.PED 2014/68/EU Certification3.IBR
6.Others
4.EN 10204 3.1 Certificate
Special Options:
1.Hydrostatic Pressure test.2.Dye-Penetration test3.Radiography Level 1/Level 24.Others
Testing Options:
1. ANSI B16.5 Standard (½”NB,1” NB,1 ½”NB,2”NB)2. BS Standard (½”NB,1” NB,1 ½”NB,2”NB)3. DIN Standard (½”NB,1” NB,1 ½”NB,2”NB)
Process Connection Options:
1. BSP : (½”,1”,1 ½”,2”) Male/Female2. NPT : (½”,1”,1 ½”,2”) Male/Female3. Weldolet Connection4. Sockolet Connection
Threaded Option:
1. Stainless Steel 304/316/316L
5. Inconel 625
2. Titanium
6. Inconel 825
3. Hastelloy C-276
7. Other Non Magnetic Alloys
4. Monel 400
Material Options :
1. Ball Valve2. Gate Valve3. Needle Valve
Valve option for Vent And Drain :
1. Stainless Steel 304/316/316L2. Carbon Steel3. PTFE/PVDF
Material Option For Valve:
1 Guided Wave Radar Level Transmitter
5.Displacer Level Switch/Transmitter
2.Non-Contact Radar Level Transmitter
6.Bridle Arragement with MLI.
3.Vertical Float Level Switch
7.Others
4.Magnetostrictive Level Transmitter
Instrument Options:
1.NACE MR0175 Compliance and Material Certificate
5.None
2.PED 2014/68/EU Certification3.IBR
6.Others
4.EN 10204 3.1 Certificate
Special Options:
1.Hydrostatic Pressure test.2.Dye-Penetration test3.Radiography Level 1/Level 24.Others
Testing Options:
1. ANSI B16.5 Standard (½”NB,1” NB,1 ½”NB,2”NB)2. BS Standard (½”NB,1” NB,1 ½”NB,2”NB)3. DIN Standard (½”NB,1” NB,1 ½”NB,2”NB)
Process Connection Options:
1. BSP : (½”,1”,1 ½”,2”) Male/Female2. NPT : (½”,1”,1 ½”,2”) Male/Female3. Weldolet Connection4. Sockolet Connection
Threaded Option:
1. Stainless Steel 304/316/316L
5. Inconel 625
2. Titanium
6. Inconel 825
3. Hastelloy C-276
7. Other Non Magnetic Alloys
4. Monel 400
Material Options :
1. Ball Valve2. Gate Valve3. Needle Valve
Valve option for Vent And Drain :
1. Stainless Steel 304/316/316L2. Carbon Steel3. PTFE/PVDF
Material Option For Valve:
1 Guided Wave Radar Level Transmitter
5.Displacer Level Switch/Transmitter
2.Non-Contact Radar Level Transmitter
6.Bridle Arragement with MLI.
3.Vertical Float Level Switch
7.Others
4.Magnetostrictive Level Transmitter
Instrument Options:
Page 12
External Chambers with Threaded process connection
Gasket
Chamber Flange
Fasteners
Chamber
Thread
Name plate
DrainConnection
VentConnection
ConnectingPipe
AB
MAGNETIC LEVEL INDICATOR
Model No : Serial No : MOC :
Max.Op.Pr. : barMax.Op.Temp.: °CProcess Conn. : C to C : mmFloat :
S. G :Display type :Switches : 'X'mitter :
Made in India
SHRIDHAN AutomationTM
WWW.shridhan.com
CE 1128
C-C
Dis
tan
ce
Tota
l Le
ng
th (
C-C
+A
+B
)
1.NACE MR0175 Compliance and Material Certificate
5.None
2.PED 2014/68/EU Certification3.IBR
6.Others
4.EN 10204 3.1 Certificate
Special Options:
1.Hydrostatic Pressure test.2.Dye-Penetration test3.Radiography Level 1/Level 24.Others
Testing Options:
1. ANSI B16.5 Standard (½”NB,1” NB,1 ½”NB,2”NB)2. BS Standard (½”NB,1” NB,1 ½”NB,2”NB)3. DIN Standard (½”NB,1” NB,1 ½”NB,2”NB)
Process Connection Options:
1. BSP : (½”,1”,1 ½”,2”) Male/Female2. NPT : (½”,1”,1 ½”,2”) Male/Female3. Weldolet Connection4. Sockolet Connection
Threaded Option:
1. Stainless Steel 304/316/316L
5. Inconel 625
2. Titanium
6. Inconel 825
3. Hastelloy C-276
7. Other Non Magnetic Alloys
4. Monel 400
Material Options :
1. Ball Valve2. Gate Valve3. Needle Valve
Valve option for Vent And Drain :
1. Stainless Steel 304/316/316L2. Carbon Steel3. PTFE/PVDF
Material Option For Valve:
1 Guided Wave Radar Level Transmitter
5.Displacer Level Switch/Transmitter
2.Non-Contact Radar Level Transmitter
6.Bridle Arragement with MLI.
3.Vertical Float Level Switch
7.Others
4.Magnetostrictive Level Transmitter
Instrument Options:
Page 13
External Chamber with Flanged Top and Bottom
Tee Joint Type External Chamber
ProcessConnection
C-C
Dis
tanc
eA
B
Chamber
TEE JOINT
Name plate
DrainConnection
VentConnection
Chamber FlangeGasket
ProcessConnection
SHRIDHAN Automation
www.shridhan.com
EXTERNAL CHAMBER
Model No: ___________________
Serial No: ___________________
MOC:
___________________
Max. op. pressure:________________ bar
Max. op. temp: _________________ C
Process Connection: __________________
Centre to Centre: ________________ mm
Specific Gravity: ___________________
Display type: ___________________
Transmitter: ___________________
Year of Manufacture: ________________
Made in India
TM
xxxx
ProcessConnection
C-C
Dis
tanc
eA
B
Chamber
ConnectingPipe
Name plate
DrainConnection
VentConnection
Chamber FlangeGasket
SHRIDHAN Automation
www.shridhan.com
EXTERNAL CHAMBER
Model No: ___________________
Serial No: ___________________
MOC:
___________________
Max. op. pressure:________________ bar
Max. op. temp: _________________ C
Process Connection: __________________
Centre to Centre: ________________ mm
Specific Gravity: ___________________
Display type: ___________________
Transmitter: ___________________
Year of Manufacture: _______________ _
Made in India
TM
xxxx
Fasteners
Fasteners
1.NACE MR0175 Compliance and Material Certificate
5.None
2.PED 2014/68/EU Certification3.IBR
6.Others
4.EN 10204 3.1 Certificate
Special Options:
1.Hydrostatic Pressure test.2.Dye-Penetration test3.Radiography Level 1/Level 24.Others
Testing Options:
1. ANSI B16.5 Standard (½”NB,1” NB,1 ½”NB,2”NB)2. BS Standard (½”NB,1” NB,1 ½”NB,2”NB)3. DIN Standard (½”NB,1” NB,1 ½”NB,2”NB)
Process Connection Options:
1. BSP : (½”,1”,1 ½”,2”) Male/Female2. NPT : (½”,1”,1 ½”,2”) Male/Female3. Weldolet Connection4. Sockolet Connection
Threaded Option:
1. Stainless Steel 304/316/316L
5. Inconel 625
2. Titanium
6. Inconel 825
3. Hastelloy C-276
7. Other Non Magnetic Alloys
4. Monel 400
Material Options :
1. Ball Valve2. Gate Valve3. Needle Valve
Valve option for Vent And Drain :
1. Stainless Steel 304/316/316L2. Carbon Steel3. PTFE/PVDF
Material Option For Valve:
1 Guided Wave Radar Level Transmitter
5.Displacer Level Switch/Transmitter
2.Non-Contact Radar Level Transmitter
6.Bridle Arragement with MLI.
3.Vertical Float Level Switch
7.Others
4.Magnetostrictive Level Transmitter
Instrument Options:
1.NACE MR0175 Compliance and Material Certificate
5.None
2.PED 2014/68/EU Certification3.IBR
6.Others
4.EN 10204 3.1 Certificate
Special Options:
1.Hydrostatic Pressure test.2.Dye-Penetration test3.Radiography Level 1/Level 24.Others
Testing Options:
1. ANSI B16.5 Standard (½”NB,1” NB,1 ½”NB,2”NB)2. BS Standard (½”NB,1” NB,1 ½”NB,2”NB)3. DIN Standard (½”NB,1” NB,1 ½”NB,2”NB)
Process Connection Options:
1. BSP : (½”,1”,1 ½”,2”) Male/Female2. NPT : (½”,1”,1 ½”,2”) Male/Female3. Weldolet Connection4. Sockolet Connection
Threaded Option:
1. Stainless Steel 304/316/316L
5. Inconel 625
2. Titanium
6. Inconel 825
3. Hastelloy C-276
7. Other Non Magnetic Alloys
4. Monel 400
Material Options :
1. Ball Valve2. Gate Valve3. Needle Valve
Valve option for Vent And Drain :
1. Stainless Steel 304/316/316L2. Carbon Steel3. PTFE/PVDF
Material Option For Valve:
1 Guided Wave Radar Level Transmitter
5.Displacer Level Switch/Transmitter
2.Non-Contact Radar Level Transmitter
6.Bridle Arragement with MLI.
3.Vertical Float Level Switch
7.Others
4.Magnetostrictive Level Transmitter
Instrument Options:
Page 14
External Chamber with Flanged Vent & Drain
External Chamber with Dual Process Connection
Gasket
100.
100.0C
-C D
ista
nce
AB
EXTERNAL CHAMBER
Model No: ___________________Serial No: _ __________________MOC: _ __________________Max. op. pressure:_ _______________ barMax. op. temp: _ ________________ CProcess Connection: __________________Centre to Centre: _ _______________ mmSpecific Gravity: ___________________ Display type: ___________________Transmitter: ___________________Year of Manufacture: ________________
Made in India xxxx
ChamberFlange
Fasteners
Chamber
Name plate
Drain Connection
ProcessConnection
Vent Connection
ConnectingPipe
100.
100.
C-C
Dis
tanc
eA
B
EXTERNAL CHAMBER
Model No: _ __________________Serial No: _ __________________MOC: _ __________________Max. op. pressure:_ _______________ barMax. op. temp: _ ________________ CProcess Connection: __________________Centre to Centre: _ _______________ mmSpecific Gravity: ___________________ Display type: ___________________Transmitter: ___________________Year of Manufacture: ________________
Made in India xxxx
GasketChamber Flange
Fasteners
Chamber
Name plate
DrainConnection
Process Connection
VentConnection
ConnectingPipe
1.NACE MR0175 Compliance and Material Certificate
5.None
2.PED 2014/68/EU Certification3.IBR
6.Others
4.EN 10204 3.1 Certificate
Special Options:
1.Hydrostatic Pressure test.2.Dye-Penetration test3.Radiography Level 1/Level 24.Others
Testing Options:
1. ANSI B16.5 Standard (½”NB,1” NB,1 ½”NB,2”NB)2. BS Standard (½”NB,1” NB,1 ½”NB,2”NB)3. DIN Standard (½”NB,1” NB,1 ½”NB,2”NB)
Process Connection Options:
1. BSP : (½”,1”,1 ½”,2”) Male/Female2. NPT : (½”,1”,1 ½”,2”) Male/Female3. Weldolet Connection4. Sockolet Connection
Threaded Option:
1. Stainless Steel 304/316/316L
5. Inconel 625
2. Titanium
6. Inconel 825
3. Hastelloy C-276
7. Other Non Magnetic Alloys
4. Monel 400
Material Options :
1. Ball Valve2. Gate Valve3. Needle Valve
Valve option for Vent And Drain :
1. Stainless Steel 304/316/316L2. Carbon Steel3. PTFE/PVDF
Material Option For Valve:
1 Guided Wave Radar Level Transmitter
5.Displacer Level Switch/Transmitter
2.Non-Contact Radar Level Transmitter
6.Bridle Arragement with MLI.
3.Vertical Float Level Switch
7.Others
4.Magnetostrictive Level Transmitter
Instrument Options:
1.NACE MR0175 Compliance and Material Certificate
5.None
2.PED 2014/68/EU Certification3.IBR
6.Others
4.EN 10204 3.1 Certificate
Special Options:
1.Hydrostatic Pressure test.2.Dye-Penetration test3.Radiography Level 1/Level 24.Others
Testing Options:
1. ANSI B16.5 Standard (½”NB,1” NB,1 ½”NB,2”NB)2. BS Standard (½”NB,1” NB,1 ½”NB,2”NB)3. DIN Standard (½”NB,1” NB,1 ½”NB,2”NB)
Process Connection Options:
1. BSP : (½”,1”,1 ½”,2”) Male/Female2. NPT : (½”,1”,1 ½”,2”) Male/Female3. Weldolet Connection4. Sockolet Connection
Threaded Option:
1. Stainless Steel 304/316/316L
5. Inconel 625
2. Titanium
6. Inconel 825
3. Hastelloy C-276
7. Other Non Magnetic Alloys
4. Monel 400
Material Options :
1. Ball Valve2. Gate Valve3. Needle Valve
Valve option for Vent And Drain :
1. Stainless Steel 304/316/316L2. Carbon Steel3. PTFE/PVDF
Material Option For Valve:
1 Guided Wave Radar Level Transmitter
5.Displacer Level Switch/Transmitter
2.Non-Contact Radar Level Transmitter
6.Bridle Arragement with MLI.
3.Vertical Float Level Switch
7.Others
4.Magnetostrictive Level Transmitter
Instrument Options:
Page 15
External Chamber Dual Process Connection
2. Stilling Wells
100.
100.
C-C
Dis
tanc
eA
B
100.0
EXTERNAL CHAMBER
Model No: _ __________________Serial No: _ __________________MOC: _ __________________Max. op. pressure: ________________ barMax. op. temp: _ ________________ CProcess Connection: __________________Centre to Centre: _ _______________ mmSpecific Gravity: ___________________ Display type: ___________________Transmitter: ___________________Year of Manufacture: ________________
Made in India xxxx
Gasket
Chamber Flange
Fasteners
Chamber
Name plate
DrainConnection
ProcessConnection
VentConnection
ConnectingPipe
1.NACE MR0175 Compliance and Material Certificate
5.None
2.PED 2014/68/EU Certification3.IBR
6.Others
4.EN 10204 3.1 Certificate
Special Options:
1.Hydrostatic Pressure test.2.Dye-Penetration test3.Radiography Level 1/Level 24.Others
Testing Options:
1. ANSI B16.5 Standard (½”NB,1” NB,1 ½”NB,2”NB)2. BS Standard (½”NB,1” NB,1 ½”NB,2”NB)3. DIN Standard (½”NB,1” NB,1 ½”NB,2”NB)
Process Connection Options:
1. BSP : (½”,1”,1 ½”,2”) Male/Female2. NPT : (½”,1”,1 ½”,2”) Male/Female3. Weldolet Connection4. Sockolet Connection
Threaded Option:
1. Stainless Steel 304/316/316L
5. Inconel 625
2. Titanium
6. Inconel 825
3. Hastelloy C-276
7. Other Non Magnetic Alloys
4. Monel 400
Material Options :
1. Ball Valve2. Gate Valve3. Needle Valve
Valve option for Vent And Drain :
1. Stainless Steel 304/316/316L2. Carbon Steel3. PTFE/PVDF
Material Option For Valve:
1 Guided Wave Radar Level Transmitter
5.Displacer Level Switch/Transmitter
2.Non-Contact Radar Level Transmitter
6.Bridle Arragement with MLI.
3.Vertical Float Level Switch
7.Others
4.Magnetostrictive Level Transmitter
Instrument Options:
Switches and transmitters might not give accurate results in turbulent process conditions. Hence, they are inserted in a stilling well mounted inside the tank which helps in calming the process liquid, creating favorable conditions for switches & transmitters to work accurately.
A
AInstrument flange
Nozzle Pipe Fasteners forInstrument Connection
Section A-A
Stilling Well Pipe
Stilling well-Pipe with Flange
A
AInstrument flange
Nozzle Pipe
Stilling Well Pipe
Vessel Connection flange
Gasket for Vessel
Fasteners For VesselConnection
Fasteners forInstrument Connection
Section A-A
Stilling well-Pipe ,Flange & Secondary Flange
Page 16
Notes :
Indian Marketing Network
Mangalore New Delhi Ahmedabad Pune Mumbai Chennai
International Marketing Network
Middle East Singapore Malaysia Thailand Netherlands USA
INDIA
HEAD OFFICE & FACTORY
SHRIDHAN Automation Pvt.Ltd.#B-54, KSSIDC Industrial Estate, Kumbalgodu, Mysore RoadBangalore-560074INDIAPhone: +91-80-28437847/848
UNIT 2:
SHRIDHAN Automation Pvt.Ltd.#D-13, KIADB Industrial Area, Kumbalgodu, Mysore RoadBangalore-560074INDIA
Email : [email protected] : www.shridhan.com
MIDDLE EAST
Orbit Automation FZE#R4-40 , PO Box - 122828 SAIF Zone, Sharjah, UAE( A 100% SUBSIDIARY OF SHRIDHAN Automation. , INDIA )Contact : +97155-9347963 / +97155-1883375Email : [email protected]
Disclaimer: We reserve the right to modify the design without prior notice SAPL/CTGE/EXCS/04/2018