external – c-clip metric · dg t d s max df g dc to order different material/finishes, append...
TRANSCRIPT
HUYETT.COM • 785-392-3017
Prices, materials, dimensions, tolerances, designs, and grades subject to change without notice. © 2017 G.L. Huyett
142For detailed specifications and tolerances, visi t Huyett.com.
Description How to IdentifyIdeal for low clearance applications where radial installation is preferred.
Item#
Shaft Diameter
(mm)
Groove Size Ring Size & Weight Item#
Clearance Supplementary Data Use with ApplicatorDiameter Width Depth Thickness2 Free Diameter Max.
SectionWeight Free
Outside Diameter
Installed in Groove
Edge Margin Thrust Load Ring
Thrust Load Groove
Allowable Radii &
Chamfers
Max. Loadw/R Max.
or Ch Max.
RPM Limits
Ds Dg Tol. W Min.
d Ref.
T Tol. Df Tol. S Max.
kg/ 1,000
G Ref.
L2 Max.
Y Min.
Pr kN
PgkN
R/Ch Max.
P'r kN
DC-003 3 2.3
-0.07
0.44 0.35 0.40 -0.05 2.18 ±0.06 0.90 0.02 DC-003 3.98 4.1 1.0 0.50 0.24 0.40 0.40 95,000 RRA-545
DC-004 4 3.2 0.44 0.40 0.40 -0.05 3.00 ±0.06 1.00 0.04 DC-004 5.00 5.2 1.2 0.50 0.37 0.40 0.40 90,000 RRA-080
DC-005 5 4.0 0.64 0.50 0.60 -0.05 3.80 ±0.08 1.20 0.08 DC-005 6.20 6.4 1.5 1.10 0.58 0.60 0.70 88,000 RRA-547
DC-006 6 5.0 0.74 0.50 0.70 -0.05 4.80 ±0.08 1.30 0.11 DC-006 7.40 7.6 1.5 1.65 0.72 0.70 1.10 80,000 RRA-320
DC-007 7 6.0
-0.09
0.85 0.50 0.80 -0.05 5.80 ±0.08 1.40 0.13 DC-007 8.60 8.8 1.5 2.20 0.85 0.80 1.30 69,000 RRA-120
DC-008 8 7.0 0.85 0.50 0.80 -0.05 6.80 ±0.09 1.60 0.17 DC-008 10.00 10.2 1.5 2.20 0.98 0.80 1.30 67,000 RRA-570
DC-009 9 8.0 1.10 0.50 1.00 -0.06 7.80 ±0.09 1.70 0.22 DC-009 11.20 11.4 1.5 3.50 1.10 1.00 2.00 58,000 RRA-571
DC-010 10 9.0 1.10 0.50 1.00 -0.06 8.75 ±0.09 1.70 0.26 DC-010 12.15 12.4 1.5 3.70 1.24 1.00 2.00 50,000 RRA-572
DC-011 11 10.0
-0.11
1.10 0.50 1.00 -0.06 9.65 ±0.18 1.80 0.29 DC-011 13.20 13.6 1.5 4.00 1.35 1.00 2.00 40,000 RRA-573
DC-012 12 10.9 1.10 0.55 1.00 -0.06 10.55 ±0.18 1.90 0.32 DC-012 14.35 14.7 1.7 4.20 1.65 1.00 2.00 35,000 RRA-290
DC-013 13 11.8 1.10 0.60 1.00 -0.06 11.40 ±0.18 2.00 0.36 DC-013 15.40 15.8 1.8 4.50 1.90 1.00 2.00 30,000 RRA-190
DC-014 14 12.7 1.10 0.65 1.00 -0.06 12.30 ±0.18 2.00 0.40 DC-014 16.30 16.7 2.0 5.00 2.20 1.00 2.00 27,000 RRA-390
DC-015 15 13.6 1.10 0.70 1.00 -0.06 13.20 ±0.18 2.10 0.46 DC-015 17.40 17.8 2.1 5.50 2.60 1.00 2.00 25,000 RRA-577
DC-016 16 14.5 1.10 0.75 1.00 -0.06 14.10 ±0.18 2.20 0.54 DC-016 18.50 18.9 2.3 5.80 3.00 1.00 2.00 24,000 RRA-400
DC-017 17 15.4 1.10 0.80 1.00 -0.06 14.90 ±0.18 2.25 0.64 DC-017 19.40 19.9 2.4 6.00 3.40 1.00 2.00 23,000 RRA-579
DC-018 18 16.3 1.30 0.85 1.20 -0.06 15.80 ±0.18 2.30 0.72 DC-018 20.40 20.9 2.6 8.50 3.70 1.20 2.80 21,000 RRA-200
DC-019 19 17.2 1.30 0.90 1.20 -0.06 16.70 ±0.18 2.40 0.80 DC-019 21.50 22.0 2.7 9.00 4.30 1.20 2.80 21,000 RRA-280
DC-020 20 18.1
-0.21
1.30 0.95 1.20 -0.06 17.55 ±0.18 2.55 0.87 DC-020 22.65 23.2 2.9 9.40 4.70 1.20 3.00 20,000 RRA-582
DC-022 22 19.9 1.30 1.05 1.20 -0.06 19.40 ±0.21 2.80 1.10 DC-022 25.00 25.5 3.2 10.00 5.70 1.20 3.00 17,000 RRA-583
DC-023 23 20.8 1.30 1.10 1.20 -0.06 20.20 ±0.21 2.90 1.15 DC-023 26.00 26.6 3.3 10.50 6.20 1.20 3.20 15,000 RRA-584
EXTERNAL – C-CLIP METRIC
W
DsDg
Td
S Max
DfG
DC
TO ORDER DIFFERENT MATERIAL/FINISHES,APPEND SUFFIX WITH YOUR CHOICE:
"NONE" • -SS
Dg
L2
1. Verify C-shape design and appearance.2. Measure the shaft diameter (Ds).3. Measure the ring outside diameter (G).4. Measure the ring thickness (T).5. Find the part in the chart.
Clearance Diameter Installed in GrooveRing Dimensions Groove Dimensions
W
DsDg
Td
S Max
DfG
Additional attribute data on adjacent page.
Prices, materials, dimensions, tolerances, designs, and grades subject to change without notice. © 2017 G.L. Huyett
143For detailed specifications and tolerances, visi t Huyett.com.
Suffix Material/Finish
All dimensions in millimeters.
For hardness specifications, see page 145.2 For plated rings add 0.05 mm to the listed maximum thickness. Maximum ring thickness will be a
minimum of 0.005 mm less than the listed groove width (W) minimum.
Item#
Shaft Diameter
(mm)
Groove Size Ring Size & Weight Item#
Clearance Supplementary Data Use with ApplicatorDiameter Width Depth Thickness2 Free Diameter Max.
SectionWeight Free
Outside Diameter
Installed in Groove
Edge Margin Thrust Load Ring
Thrust Load Groove
Allowable Radii &
Chamfers
Max. Loadw/R Max.
or Ch Max.
RPM Limits
Ds Dg Tol. W Min.
d Ref.
T Tol. Df Tol. S Max.
kg/ 1,000
G Ref.
L2 Max.
Y Min.
Pr kN
PgkN
R/Ch Max.
P'r kN
DC-003 3 2.3
-0.07
0.44 0.35 0.40 -0.05 2.18 ±0.06 0.90 0.02 DC-003 3.98 4.1 1.0 0.50 0.24 0.40 0.40 95,000 RRA-545
DC-004 4 3.2 0.44 0.40 0.40 -0.05 3.00 ±0.06 1.00 0.04 DC-004 5.00 5.2 1.2 0.50 0.37 0.40 0.40 90,000 RRA-080
DC-005 5 4.0 0.64 0.50 0.60 -0.05 3.80 ±0.08 1.20 0.08 DC-005 6.20 6.4 1.5 1.10 0.58 0.60 0.70 88,000 RRA-547
DC-006 6 5.0 0.74 0.50 0.70 -0.05 4.80 ±0.08 1.30 0.11 DC-006 7.40 7.6 1.5 1.65 0.72 0.70 1.10 80,000 RRA-320
DC-007 7 6.0
-0.09
0.85 0.50 0.80 -0.05 5.80 ±0.08 1.40 0.13 DC-007 8.60 8.8 1.5 2.20 0.85 0.80 1.30 69,000 RRA-120
DC-008 8 7.0 0.85 0.50 0.80 -0.05 6.80 ±0.09 1.60 0.17 DC-008 10.00 10.2 1.5 2.20 0.98 0.80 1.30 67,000 RRA-570
DC-009 9 8.0 1.10 0.50 1.00 -0.06 7.80 ±0.09 1.70 0.22 DC-009 11.20 11.4 1.5 3.50 1.10 1.00 2.00 58,000 RRA-571
DC-010 10 9.0 1.10 0.50 1.00 -0.06 8.75 ±0.09 1.70 0.26 DC-010 12.15 12.4 1.5 3.70 1.24 1.00 2.00 50,000 RRA-572
DC-011 11 10.0
-0.11
1.10 0.50 1.00 -0.06 9.65 ±0.18 1.80 0.29 DC-011 13.20 13.6 1.5 4.00 1.35 1.00 2.00 40,000 RRA-573
DC-012 12 10.9 1.10 0.55 1.00 -0.06 10.55 ±0.18 1.90 0.32 DC-012 14.35 14.7 1.7 4.20 1.65 1.00 2.00 35,000 RRA-290
DC-013 13 11.8 1.10 0.60 1.00 -0.06 11.40 ±0.18 2.00 0.36 DC-013 15.40 15.8 1.8 4.50 1.90 1.00 2.00 30,000 RRA-190
DC-014 14 12.7 1.10 0.65 1.00 -0.06 12.30 ±0.18 2.00 0.40 DC-014 16.30 16.7 2.0 5.00 2.20 1.00 2.00 27,000 RRA-390
DC-015 15 13.6 1.10 0.70 1.00 -0.06 13.20 ±0.18 2.10 0.46 DC-015 17.40 17.8 2.1 5.50 2.60 1.00 2.00 25,000 RRA-577
DC-016 16 14.5 1.10 0.75 1.00 -0.06 14.10 ±0.18 2.20 0.54 DC-016 18.50 18.9 2.3 5.80 3.00 1.00 2.00 24,000 RRA-400
DC-017 17 15.4 1.10 0.80 1.00 -0.06 14.90 ±0.18 2.25 0.64 DC-017 19.40 19.9 2.4 6.00 3.40 1.00 2.00 23,000 RRA-579
DC-018 18 16.3 1.30 0.85 1.20 -0.06 15.80 ±0.18 2.30 0.72 DC-018 20.40 20.9 2.6 8.50 3.70 1.20 2.80 21,000 RRA-200
DC-019 19 17.2 1.30 0.90 1.20 -0.06 16.70 ±0.18 2.40 0.80 DC-019 21.50 22.0 2.7 9.00 4.30 1.20 2.80 21,000 RRA-280
DC-020 20 18.1
-0.21
1.30 0.95 1.20 -0.06 17.55 ±0.18 2.55 0.87 DC-020 22.65 23.2 2.9 9.40 4.70 1.20 3.00 20,000 RRA-582
DC-022 22 19.9 1.30 1.05 1.20 -0.06 19.40 ±0.21 2.80 1.10 DC-022 25.00 25.5 3.2 10.00 5.70 1.20 3.00 17,000 RRA-583
DC-023 23 20.8 1.30 1.10 1.20 -0.06 20.20 ±0.21 2.90 1.15 DC-023 26.00 26.6 3.3 10.50 6.20 1.20 3.20 15,000 RRA-584
EXTERNAL – C-CLIP METRIC
DC
### = CARBONSPRINGSTEEL,PHOSPHATE###-SS = STAINLESSSTEEL,PLAINMaterial/finish combinations may not be available in all sizes. More finishes available, see page 22 for a complete listing.
Y
*The radius “Br” on the load side must not exceed 0.1T
R Max
Ch Max
Br*
Maximum Corner Radius (R Max) & Chamfer (Ch Max)
for Retained Part
*The radius “Br” on the load side must not exceed 0.1T
Edge Margin (Y)
Br
Y
R Max
Ch Max
Br
Y
R Max
Ch Max
STACKEDOPTIONSAVAILABLE,SEEHUYETT.COMFORMOREDETAILS
Additional attribute data on adjacent page.
HUYETT.COM • 785-392-3017
Prices, materials, dimensions, tolerances, designs, and grades subject to change without notice. © 2017 G.L. Huyett
144
How to Identify
For detailed specifications and tolerances, visi t Huyett.com.
Item#
Shaft Diameter
(mm)
Groove Size Ring Size & Weight Item#
Clearance Supplementary Data Use with ApplicatorDiameter Width Depth Thickness2 Free Diameter Max.
SectionWeight Free
Outside Diameter
Installed in Groove
Edge Margin Thrust Load Ring
Thrust Load Groove
Allowable Radii &
Chamfers
Max. Loadw/R Max.
or Ch Max.
RPM Limits
Ds Dg Tol. W Min.
d Ref.
T Tol. Df Tol. S Max.
kg/ 1,000
G Ref.
L2 Max.
Y Min.
Pr kN
PgkN
R/Ch Max.
P'r kN
DC-024 24 21.7
-0.21
1.30 1.15 1.20 -0.06 21.10 ±0.21 3.00 1.52 DC-024 27.10 27.7 3.5 11.00 6.80 1.20 3.20 15,000 RRA-585
DC-025 25 22.6 1.30 1.20 1.20 -0.06 22.00 ±0.21 3.15 1.74 DC-025 28.30 28.9 3.6 11.50 7.50 1.20 3.20 15,000 RRA-586
DC-026 26 23.5 1.30 1.25 1.20 -0.06 22.90 ±0.21 3.25 1.88 DC-026 29.40 30.0 3.8 12.00 8.00 1.20 3.20 15,000 RRA-586
DC-028 28 25.2 1.60 1.40 1.50 -0.06 24.60 ±0.21 3.50 2.32 DC-028 31.60 32.2 4.2 16.50 9.70 1.50 5.50 13,000 RRA-588
DC-030 30 27.0 1.60 1.50 1.50 -0.06 26.30 ±0.21 3.70 2.43 DC-030 33.70 34.4 4.5 17.00 11.00 1.50 5.60 13,000 RRA-589
DC-032 32 28.8 1.60 1.60 1.50 -0.06 28.10 ±0.21 4.00 3.02 DC-032 36.10 36.8 4.6 18.00 12.50 1.50 5.80 13,000 RRA-590
DC-035 35 31.5
-0.25
1.60 1.75 1.50 -0.06 30.80 ±0.25 4.30 3.30 DC-035 39.40 40.1 5.3 20.00 15.00 1.50 5.80 11,000 RRA-591
DC-036 36 32.4 1.85 1.80 1.75 -0.06 31.70 ±0.25 4.40 4.40 DC-036 40.50 41.2 5.4 25.00 16.00 1.75 8.30 10,000 RRA-592
DC-038 38 34.2 1.85 1.90 1.75 -0.06 33.40 ±0.25 4.60 4.62 DC-038 42.60 43.4 5.7 26.00 17.50 1.75 8.50 10,000 RRA-593
DC-040 40 36.0 1.85 2.00 1.75 -0.06 35.20 ±0.39 4.90 5.05 DC-040 45.00 45.8 6.0 27.50 20.00 1.75 8.80 9,000 RRA-594
DC-042 42 37.8 1.85 2.10 1.75 -0.06 37.00 ±0.39 5.10 5.46 DC-042 47.20 48.0 6.3 28.00 21.50 1.75 8.90 9,000 RRA-595
DC-045 45 40.5 1.85 2.25 1.75 -0.06 39.60 ±0.39 5.50 5.98 DC-045 50.60 51.5 6.8 30.00 25.00 1.75 9.00 8,000 RRA-596
DC-048 48 43.2 1.85 2.40 1.75 -0.06 42.30 ±0.39 5.90 7.82 DC-048 54.10 55.0 7.2 32.00 28.00 1.75 9.00 8,000 RRA-597
DC-050 50 45.0 2.15 2.50 2.00 -0.07 44.00 ±0.39 6.20 8.85 DC-050 56.40 57.4 7.5 39.50 31.00 2.00 12.00 7,000 RRA-598
DC-052 52 47.0 2.15 2.50 2.00 -0.07 46.00 ±0.39 6.30 9.33 DC-052 58.60 59.6 7.5 41.00 32.00 2.00 12.00 7,000 RRA-599
DC-055 55 50.0 2.15 2.50 2.00 -0.07 48.50 ±0.39 6.50 10.40 DC-055 61.50 63.0 7.5 43.00 34.00 2.00 12.00 7,000 RRA-600
EXTERNAL – C-CLIP METRIC
W
DsDg
Td
S Max
DfG
DC
TO ORDER DIFFERENT MATERIAL/FINISHES,APPEND SUFFIX WITH YOUR CHOICE:
"NONE" • -SS
1. Verify C-shape design and appearance.2. Measure the shaft diameter (Ds).3. Measure the ring outside diameter (G).4. Measure the ring thickness (T).5. Find the part in the chart.
W
DsDg
Td
S Max
DfG
Applications
Purchase rings in a stacked roll pack.
Mount on a rail dispenser.
Remove ring from rail using an applicator.
Additional attribute data on adjacent page.
Prices, materials, dimensions, tolerances, designs, and grades subject to change without notice. © 2017 G.L. Huyett
145
Suffix Material/Finish
For detailed specifications and tolerances, visi t Huyett.com.
All dimensions in millimeters.2 For plated rings add 0.05 mm to the listed maximum thickness. Maximum ring thickness will be a minimum of 0.005 mm less than
the listed groove width (W) minimum.
Item#
Shaft Diameter
(mm)
Groove Size Ring Size & Weight Item#
Clearance Supplementary Data Use with ApplicatorDiameter Width Depth Thickness2 Free Diameter Max.
SectionWeight Free
Outside Diameter
Installed in Groove
Edge Margin Thrust Load Ring
Thrust Load Groove
Allowable Radii &
Chamfers
Max. Loadw/R Max.
or Ch Max.
RPM Limits
Ds Dg Tol. W Min.
d Ref.
T Tol. Df Tol. S Max.
kg/ 1,000
G Ref.
L2 Max.
Y Min.
Pr kN
PgkN
R/Ch Max.
P'r kN
DC-024 24 21.7
-0.21
1.30 1.15 1.20 -0.06 21.10 ±0.21 3.00 1.52 DC-024 27.10 27.7 3.5 11.00 6.80 1.20 3.20 15,000 RRA-585
DC-025 25 22.6 1.30 1.20 1.20 -0.06 22.00 ±0.21 3.15 1.74 DC-025 28.30 28.9 3.6 11.50 7.50 1.20 3.20 15,000 RRA-586
DC-026 26 23.5 1.30 1.25 1.20 -0.06 22.90 ±0.21 3.25 1.88 DC-026 29.40 30.0 3.8 12.00 8.00 1.20 3.20 15,000 RRA-586
DC-028 28 25.2 1.60 1.40 1.50 -0.06 24.60 ±0.21 3.50 2.32 DC-028 31.60 32.2 4.2 16.50 9.70 1.50 5.50 13,000 RRA-588
DC-030 30 27.0 1.60 1.50 1.50 -0.06 26.30 ±0.21 3.70 2.43 DC-030 33.70 34.4 4.5 17.00 11.00 1.50 5.60 13,000 RRA-589
DC-032 32 28.8 1.60 1.60 1.50 -0.06 28.10 ±0.21 4.00 3.02 DC-032 36.10 36.8 4.6 18.00 12.50 1.50 5.80 13,000 RRA-590
DC-035 35 31.5
-0.25
1.60 1.75 1.50 -0.06 30.80 ±0.25 4.30 3.30 DC-035 39.40 40.1 5.3 20.00 15.00 1.50 5.80 11,000 RRA-591
DC-036 36 32.4 1.85 1.80 1.75 -0.06 31.70 ±0.25 4.40 4.40 DC-036 40.50 41.2 5.4 25.00 16.00 1.75 8.30 10,000 RRA-592
DC-038 38 34.2 1.85 1.90 1.75 -0.06 33.40 ±0.25 4.60 4.62 DC-038 42.60 43.4 5.7 26.00 17.50 1.75 8.50 10,000 RRA-593
DC-040 40 36.0 1.85 2.00 1.75 -0.06 35.20 ±0.39 4.90 5.05 DC-040 45.00 45.8 6.0 27.50 20.00 1.75 8.80 9,000 RRA-594
DC-042 42 37.8 1.85 2.10 1.75 -0.06 37.00 ±0.39 5.10 5.46 DC-042 47.20 48.0 6.3 28.00 21.50 1.75 8.90 9,000 RRA-595
DC-045 45 40.5 1.85 2.25 1.75 -0.06 39.60 ±0.39 5.50 5.98 DC-045 50.60 51.5 6.8 30.00 25.00 1.75 9.00 8,000 RRA-596
DC-048 48 43.2 1.85 2.40 1.75 -0.06 42.30 ±0.39 5.90 7.82 DC-048 54.10 55.0 7.2 32.00 28.00 1.75 9.00 8,000 RRA-597
DC-050 50 45.0 2.15 2.50 2.00 -0.07 44.00 ±0.39 6.20 8.85 DC-050 56.40 57.4 7.5 39.50 31.00 2.00 12.00 7,000 RRA-598
DC-052 52 47.0 2.15 2.50 2.00 -0.07 46.00 ±0.39 6.30 9.33 DC-052 58.60 59.6 7.5 41.00 32.00 2.00 12.00 7,000 RRA-599
DC-055 55 50.0 2.15 2.50 2.00 -0.07 48.50 ±0.39 6.50 10.40 DC-055 61.50 63.0 7.5 43.00 34.00 2.00 12.00 7,000 RRA-600
HardnessRanges:DC-clips
Material Size RangeHardness
HV HRC Lower Scale♦ 15N 30N
(blank)Carbon Steel,(SAE 1060-1090)
3 & 45 – 1718 – 55
485 – 545485 – 545485 – 545
48 – 5248 – 5248 – 52
84.5 – 86.5 HR15N♦♦
66.5 – 70.5 HR30N –
– –
-SSStainless Steel,(PH 15-7 Mo)
3 & 45 – 1718 – 55
435 – 530435 – 530435 – 530
44 – 5144 – 5144 – 51
82.5 – 86 HR15N♦♦
63 – 69.5 HR30N –
– –
-SSStainless Steel,(DIN 1.4122 X39CrMo17)
All 470 – 580 47 – 54 – 84 – 87.5 66 – 72
♦ Where Applicable♦♦ Hardness cannot be checked with any degree of accuracy directly on these rings.
EXTERNAL – C-CLIP METRIC
DC
### = CARBONSPRINGSTEEL,PHOSPHATE###-SS = STAINLESSSTEEL,PLAINMaterial/finish combinations may not be available in all sizes. More finishes available, see page 22 for a complete listing.
Installationtoolsavailable,
seepage257
STACKEDOPTIONSAVAILABLE,SEEHUYETT.COMFORMOREDETAILS
Additional attribute data on adjacent page.