exterior folding door systems · the eclipse e2™ system is designed for folding doors in exterior...
TRANSCRIPT
ECLIPSE E2I INTERIOR FOLDING DOOR HARDWARE SYSTEM
ECLIPSE E2™ SYSTEM FOR EXTERIOR OUTSWING APPLICATIONS ONLY
Eclipse E2 Outswing System Catalogue & E2i Interior Door Hardware System • Revision (10) March 26, 2018
PRINTED CATALOGUE MAY NOT BE UP TO DATE, ALWAYS REFER TO PRODUCT WEBSITE FOR MOST UP TO DATE CONTENT.
Exterior Folding Door Systems
Beautiful doors for beautiful spaces
© Copyright 2018 • Eclipse Architectural®2 ALL DRAWINGS NO SCALE
E2 HARDWARE, TRACK, SILL SYSTEM & WEATHERSEALING FOR EXTERIOR FOLDING DOORS & WINDOWS
maximum panel weight: 130 lbs (60 kg)maximum panel width: 43” (1100mm)maximum panel height: 118” (3000mm)
In a single direction
Parts Selection
TOP TRACK WITH FLUSHBOLT PIN CHANNEL SILL SYSTEM FLOOR CHANNEL
FLUSHBOLTS OR TWINPOINT
maximum number of panels: 8 each waypanel thickness: 1-3/4” (44.45 mm) using E2 Sill Systempanel thickness: 1-3/8” (34.93 mm) or 2-1/4” (57.15 mm) using floor channel.
Eclipse E2™ is specified with 5 separate groups: track, sill, weathersealing, flushbolts and hardware. Components are required from all 5 groups to build an Eclipse folding door system.
KT49C clear anodizedKT49D bronze anodizedLengths available: 111”, 147”, 183”, 222”, 294” (2.81m, 3.73m, 4.64m, 5.63m, 7.46m)
Top Track, extruded aluminum (optional)
KT41C clear anodized.KT41D bronze anodized. Lengths available: 111”, 147”, 183”, 222” (2.81m, 3.73m, 4.64m, 5.63m)
4 lengths available:
DBOT Style 1” (25.4mm) throw length regardless of bolt length. Finishes available: brushed aluminum or bronze powder coat.
KT23DV floor channel, bronze anodized with PVC insert, black.Lengths available: 111”, 147”, 183”, 222”, 294” (2.81m, 3.73m, 4.64m, 5.63m, 7.46m)
KT23BLVE Replacement PVC insert (only)
KT795 8” wide (203mm) for 1-3/4” (44.5mm) door.KT797 8” wide (203mm) for 2-1/4” (57mm) door. KT775 6-9/16” wide (167mm) for 1-3/4” (44.5mm) door. KT777 6-9/16” wide (167mm) for 2-1/4” (57mm) door. Lengths available: 111”, 147”, 183”, 222”, 294” (2.81m, 3.73m, 4.64m, 5.63m, 7.46m). Order flushbolt cups and sill assembly end gaskets separately.
KT749 Flushbolt cup, satin or bronze, used with flushbolt
KT750GASKET included with KT749, fits under rim of cup
HARDWARE2 stock finishes available: Stainless steel & pvd bronze
7-7/8” (200mm)15-3/4” (400mm)23-5/8” (600mm)39-3/8” (1000mm)
KT768GASKET sill to jamb assembly gasket
Fir top water return sill, extruded aluminum clear or bronze anodized.
KT795COVERBLVEPVC insert, black. Snap in cover for flushbolt channels for the new Eclipse sill & top track. Fits into sills above.
PVD brass (TG) finish is custom order, call for manufacturing time.
FOR OUTSWING & INSWING DOORS
The Eclipse E2™ System is designed for folding doors in exterior residential or light commercial applications. It has been developed to allow the opening to be effectively weathersealed for exposed environments. It enables up to 8 doors in both directions to be folded to the side of an opening and is suitable for Housing, Apartments, Cafes, Restaurants, Hotels & Shop Fronts. A typical installation of an Eclipse E2™ System would be glazed doors opening out onto a balcony or patio. It can be used in place of aluminum, wood or PVC sliding doors.
Weather: This system is suitable for use in exterior building applications.Application: The Eclipse E2™ System uses pivots attached to the head and sill, which allow adjustment horizontally and vertically of the entire system. The pivots provide compensation for out-of-square jambs with up to 3/8” (10mm) of adjustment. All screws are fully concealed for external security.Materials: The Eclipse E2™ System uses architectural grade aluminum alloy for tracking and stainless steel for hinge pins, carrier pins and carrier bogeys. Hinges are available in PVD brass, Brushed Stainless steel, and PVD Bronze, finishes over stainless steel.
2-15/32” (63mm)
1-3/8” (35mm)
1-1/2” (38mm)
1-1/2” (38mm) ECLTBC
Flushbolt cup used with floor channel and ADA sill, also used with Twinpoint
WEATHERSEALS & ASTRAGALDS434 Weatherseal for sill, jamb and header. Black, brown or white
KT190 Fir astragal, may be stained or painted
DSP108-35BL Pile weatherseal for door with astragal, 5/16” (8mm) pile height, black
DS7145-270BL Pile weatherseal for KT70 & KT75 top track, black
DS434 Kerf seal
DS416 Weatherseal for between doors. Black, brown or white
DS369A7145BL Aluminum T-slot extrusion with black pile insert, for bottom of doors
DS415BL Black DS415W White weatherseal for between doors, use on clad doors where kerf slot is not possible
© Copyright 2018 • E clipse Architectural® 3
INDEXKT190C84B 2, 14
KT190C84BL 2, 14
KT190C84W 2, 14
KT190 C96B 2, 14
KT190C96BL 2, 14
KT190C96W 2, 14
KT190C108B 2, 14
KT190C108BL 2, 14
KT190C108W 2, 14
KT190C120B 2, 14
KT190C120BL 2, 14
KT190C120W 2, 14
KT23BLVE 2, 12
KT23D 2, 12
KT23D-RADIUS 2, 12
DS369A7145BL 2, 8, 9, 12
DS416B 2, 4, 10
DS416BL 2, 4, 10
DS416W 2, 4, 10
DS434B 2, 4, 8 - 11
DS434B81 2, 4, 8 - 11
DS434B96 2, 4, 8 - 11
DS434BL 2, 4, 8 - 11
DS434BL81 2, 4, 8 - 11
DS434BL96 2, 4, 8 - 11
DS434W 2, 4, 8 - 11
DS434W81 2, 4, 8 - 11
DS434W96 2, 4, 8 - 11
DS415B96 2
DS415B144 2
DS415W96 2
DS415W144 2
DS415BL144 2
KT41C 2, 35
KT41C-RADIUS 13
KT41D 2, 35
KT41D-RADIUS 13
KT49C 2, 11
KT49D 2, 11
KT749BRONZE 2, 16, 17
KT749DCH 2, 16, 17
KT760SPC 8, 9
KT770SPC 8, 9
KT780SPC 8, 9
KT788E3D 12
KT841REDUCER 8, 9
KTDBSY SERIES 17
KTDBOT200NRG 16
KTDBOT200NRQ 16
KTDBOT200NRX 16
KTDBOT400NRG 16
KTDBOT400NRQ 16
KTDBOT400NRX 16
KTDBOT600NRG 16
KTDBOT600NRQ 16
KTDBOT600NRX 16KTDBOT1000NRG 16KTDBOT1000NRQ 16KTDBOT1000NRX 16
KTE2CICSTG 26, 27
KTE2CICSOL 26, 27
KTE2CICSS 26, 27
KTE2CLCSTG 26, 27
KTE2CLCSOL 26, 27
KTE2CLCSS 26, 27
KTE2CPSTG 26, 27
KTE2CPSOL 26, 27
KTE2CPSS 26, 27
KTE2CRCSTG 26, 27
KTE2CRCSOL 26, 27
KTE2CRCSS 26, 27
KTE2EHTG 26, 27
KTE2EHOL 26, 27
KTE2EHS 26, 27
KTE2HTG 26, 27
KTE2HOL 26, 27
KTE2HS 26, 27
KTE2HHTG 26, 27
KTE2HHOL 26, 27
KTE2HHS 26, 27
KTE2HHNHTG 26, 27
KTE2HHNHOL 26, 27
KTE2HHNHS 26, 27
KTE2HNHTG 26, 27
KTE2HNHOL 26, 27
KTE2HNHS 26, 27
KTE2HHNHSTG 26, 27
KTE2HHNHSOL 26, 27
KTE2HHNHSS 26, 27
KTE2HHTG 26, 27
KTE2HHSOL 26, 27
KTE2HHSS 26, 27
KTE2HNHSTG 26, 27
KTE2HNHSOL 26, 27
KTE2HNHSS 26, 27
KTE2HSTG 26, 27
KTE2HSOL 26, 27
KTE2HSS 26, 27
KTE2WPSTG 26, 27
KTE2WPSOL 26, 27
KTE2WPSS 26, 27
DSP108-35BL 2, 4, 14
DS7145-270BL 2, 11
LEVER LOCK SETS 28, 29
MULTIPOINT MK2 28
MISC / SPARE & REPLACEMENT PARTSKT750GASKET 2
KT768GASKET 2, 14
KTDBPCS 16, 17
KTDBSPQ 16, 17
KTDBSPS 16, 17
KTE2DBFORB 16, 17
KTE3HGASKET 4
KTEMAG 24
KT740DHC 25
KT740DHD 25
KT745ESPX 6, 7
KT745ESPQ 6, 7
KTDCAS 25
KTDCAOL 25
TWINPOINTECLT2TRSN0924 18 - 23
ECLT2TRSN0930 18 - 23
ECLT2NS 18 - 23
ECDF3SHN 18 - 23
ECDF4SHNS 18 - 23
ECLTBC8SS 18 - 23
ECTLBC8SOL 18 - 23
ECLT2RB 18 - 23
ECLTSP8SS 18 - 23
ECLTSP8OL 18 - 23
KTE2I INTERIOR FOLDING DOOR HARDWARE
KTE2I 30 - 35
LegendX Satin aluminumG Bright gold anodizedTG PVD brassOL PVD bronze Q Powder coat bronzeS Stainless steelC Clear anodizedD Bronze anodizedB BrownBVE Black vinyl extrusionBL BlackDHC Satin / clearDHD Bronze anodizedDHBL Black powder coatDHW White powder coatNK Black pileNG Grey pile
PVD brass (TG) finish is custom order, call for manufacturing time.
SwingIS InswingOS Outswing
MiscSPC Sill protective coverGASKET A/B gasketFORB Router bitFIR Fir top mouldDJ Drill jig for hinges
Lengths For Flushbolts7-7/8” (200mm)15-3/4” (400mm)23-5/8” (600mm)39-3/8” (1000mm)
HardwareICS Intermediate carrier 3 piece setLCS Left carrier 2 piece setRCS Right corner 2 piece setPS Pivot top & bottom 2 piece setEH “D” pull handle 1 pieceH Hinge flat with handle 1 pieceHH Hinge offset with handle 1 pieceHNH Hinge flat no handle 1 pieceHHNH Hinge offset no handle 1 pieceHS Hinge flat with handle 3 piece set HHS Hinge offset with handle 3 piece setHNHS Hinge flat no handle 3 piece setHHNHS Hinge offset no handle 3 piece setWP Wall pivot
Misc / Spare Hardware ComponentsPCS End cap for OC flushbolts pinSP Striker plateCBP Bottom pivot housingPCP Pivot capSCREW Screws for hinge flapsWPCUP Wall pivot jamb cup onlySPOC Striker plate OC flushboltTPPLATE Top pivot mounting plateDH Door hold
FlushboltsKTDBOT For outswing applicationKTDBSY For ADA sill application
© Copyright 2018 • Eclipse Architectural®4 ALL DRAWINGS NO SCALE
NO SCALE
9/32” (7mm) jamb clearance
9/32” (7mm) jamb clearance
5/32” (4mm) panel to panel gap
5/32” (4mm) panel to panel gap
5/32” (4mm) panel to panel gap
INTERIOR
INTERIOR
EXTERIOR
EXTERIOR
top pivot right hand carrier
bottom guide
hinge set facing inside
wall pivot
hinge set facing inside
basic door basic door leading door
intermediate carrier set
bottom pivot
jamb door or pivot door
9/32
” (7
mm
) Jam
b c
lear
ance
9/32” (7mm)Jamb clearance
E2 ARCHITECTURAL DETAIL
KTE3HGASKETAdhesive black gasket for optimum sealing performance around all hinge flaps.Gasket compatible with E2 & E3 hinges.
DS416 & DSP108-35BL Weatherseal Detail for 1-3/4” (44.5mm) Door
flushbolt machiningcentered at stile width
RO.5 (R1/64)
pivot doorweathersealapplication
11/16”(17.5mm)
11/16”(17.5mm)
1/8”(3.2mm)
3/8”(9.5mm)
1/8” (2.5mm) 9/16” (14mm)
5/32” (4mm)
DSP10835BL
DS416
3/8”(9.5mm)
1/8”(3.5mm)
6-9/16”(166.7mm)
5/16”(7.4mm)
9/32”(7mm)
3/4” (18.5mm)
5/16” (7.4mm)5/16” (7.4mm)
5/16”(7.4mm)
1/8” (2.8mm)
1-3/4”(44.5mm)
1-7/16” (36mm)9/16” (14mm)
4-3/8”(110.6mm)
39/64”(15.4mm)
1-5/8”(41mm)
CL
CL
CLREF
REF
latching door to jamb, weatherseal & strike plate application for 3L, 3R, 5L, 5R, 7L or 7R.
KT745extended strike plate for 1-3/4” (44.45mm) door thickness only. Used with standard style lock set.
DS434
4-5/16”(107mm)
Outswing Application
4L (4 doors folding left) Exterior View (all doors are same width)
© Copyright 2018 • E clipse Architectural® 5ALL DRAWINGS NO SCALE
E2 ARCHITECTURAL DETAIL
1-3/4”(44.5mm)
RO
KT426gasket
KT426gasket
KT427gasket
rod & caulk (air barrier)
KT426gasket
9/32” (7mm)
5/32”(4mm)
Tested in accordance with A440 and AAMA101 Testing by:
Equivalent A440 rating (A440-98)Water tightness - B4 with raised sill Air tightness - A3 minWind load resistance/structural - C2 minExceeds min. rating of AAMA/NWWDA 101/I.S. 2
Intertek Testing Services
In a single directionMaximum panel weight: 130 lbs (60 kg)Maximum panel width: 43” (1100mm)Maximum panel height: 118” (3000mm)Door thickness: 1-3/4” (44.45 mm) using Sill System. Maximum # of doors: 8 each way
Top of door to top of hinge 2-1/2” (63.5mm)same at bottom
Seal details same for upper and lower hinges (internal only, not required for external hinges)
cut inside seal flush to underside of inside hinge KT416
flush
Hinge Set Placement
INSIDE FACE OUTSIDE FACE
For full E2 test results, please visit www.eclipsearchitectural.com
5-1/2” (139.7mm)
1-5/16” (33.5mm)
Centre of top track to centre of bottom channel 23/32” (18.5mm)
EXTERIOR
RO
INTERIOR
KT795 sill
KT49 top track
© Copyright 2018 • Eclipse Architectural®6 ALL DRAWINGS NO SCALE
1x KTE2CPSpivot set1x KTE2CRCSright carrier set1x KTE2HShinge set2x KTDB non-keyed flushbolt
2x KTE2CPS pivot set1x KTE2CRCS right carrier set1x KTE2HS hinge set2x KTDB non-keyed flushbolt
1x KTE2CPS pivot set1x KTE2CICS intermediate carrier set1x KTE22HHS half offset hinge set2x KTDB non-keyed flushbolt
2x KTE2CPS pivot set1x KTE2CICS intermediate carrier set1x KTE22HHS half offset hinge set4x KTDB non-keyed flushbolt
1x KTE2CPS pivot set1x KTE2CICS intermediate carrier set1x KTE2CRCS right carrier set2x KTE22HHS half offset hinge set4x KTDB non-keyed flushbolt
2x KTE2CPSpivot set1x KTE2CICS intermediate carrier set1x KTE2CRCS right carrier set2x KTE22HHS half offset hinge set4x KTDB non-keyed flushbolt
2x KTE2CPS pivot set1x KTE2CICS intermediate carrier set1x KTE2CLCS left carrier set1x KTE2HS hinge set1x KTE22HHS half offset hinge set4x KTDB non-keyed flushbolt
1x KTE2CPS pivot set2x KTE2CICS intermediate carrier set1x KTE2HS hinge set1x KTE22HHS half offset hinge set4x KTDB non-keyed flushbolt
2x KTE2CPS pivot set2x KTE2CICS intermediate carrier set2x KTE22HHS half offset hinge set6x KTDB non-keyed flushbolt
2x KTE2CPS pivot set2x KTE2CICS intermediate carrier set1x KTE2CRCS right carrier set3x KTE22HHS half offset hinge set6x KTDB non-keyed flushbolt
2x KTE2CPS pivot set2x KTE2CICS intermediate carrier set1x KTE2CLCS left carrier set2x KTE2HS hinge set1x KTE22HHS half offset hinge set6x KTDB non-keyed flushbolt
2x KTE2CPS pivot set3x KTE2CICS intermediate carrier set1x KTE2HS hinge set2x KTE22HHS half offset hinge set8x KTDB non-keyed flushbolt
1x KTE2CPS pivot set3x KTE2CICS intermediate carrier set2x KTE2HS hinge set1x KTE22HHS half offset hinge set6xKTDB non-keyed flushbolt
1x KTE2CPS pivot set2x KTE2CICS intermediate carrier set1x KTE2CRCS right carrier set1x KTE2HS hinge set2x KTE22HHS half offset hinge set6x KTDB non-keyed flushbolt
Thisconfigurationnotaccessiblefromexterior
Thisconfigurationnotaccessiblefromexterior
Thisconfigurationnotaccessiblefromexterior
RCS
HS
PS
FB
PS PS
HS
RCSFB
PS
HHS
ICS
DH
ESPFB
PS PS
HHS
ICS
DH
FBFB
maybereversed
PS
HHS HHS
ICS RCS
FB FB
PS PS
HHS HHS
ICS
RCSFB FB
PS PS
HHS HS
ICS
LCS
DH
FB FB
PS
HSHHS
ICS ICS
DH
ESPFB FB
PS PS
HHS
ICS ICS
HHSDH DH
FB FB FB
ICS ICS ICSPS
HS HSHHS DH
ESPFB FB FB
PS PS
HHS HHS
ICS
HHS
ICS
RCS
DH
FB FB FB
PSPS
HS HSHHS
ICS ICS
LCS
DHFB FB FB
PSPS
HSHHS
ICS
HHS
ICSICS
DH DH
FB FB FBFB
maybereversed
RCSICS ICSPS
HHS HS HHS
FB FB FB
1x KTE2CLCSleft carrier setPer pair of doors:
1x KTE2CRCSright carrier set1x KTE2HShinge set2x KTDBnon-keyed flushbolt
FB
DH
PASSAGESETLOCKBYOTHER
FLUSHBOLTSTOP&BOTTOM
TWINPOINTOPTIONTOFB
FLOATINGDOORPAIRS
ASTRAGAL
DOORHOLD
LEGEND
INTERIOR
EXTERIOR
4-5/16”
4”
EXTENDEDSTRIKEPLATEfor 1-3/4” Door Only
KT745ESPXsatin finishKT745ESPQbronze powder coat
HARDWARELEGENDPS Pivot setWPS Wall pivot setMCS Meeting carrier setICS Intermediate carrier setLCS Left carrier setRCS Right carrier setHHS Half offset hinge setHS Hinge set (flat)FB FlushboltESP Extended strike plateDH Door holdMAG MagnetTP Twinpoint
2L
2L1R
3L
3L1R
4L
4L1R
3L2R
5L
3L3R
7L
4L3R
5L2R
5L3R
6L
INTERIOR
EXTERIOR
INTERIOR
EXTERIOR
INTERIOR
EXTERIOR
INTERIOR
EXTERIOR
INTERIOR
EXTERIOR
INTERIOR
EXTERIOR
INTERIOR
EXTERIOR
INTERIOR
EXTERIOR
INTERIOR
EXTERIOR
INTERIOR
EXTERIOR
INTERIOR
EXTERIOR
INTERIOR
EXTERIOR
INTERIOR
EXTERIOR
INTERIOR
EXTERIOR
E2 HARDWARE LIST FOR DOOR CONFIGURATIONS Passage set/lock, flushbolt, astragal & hardware placement for outswing applications
From left to right
Configuration is always determined when viewing system from exterior side, going from left to right.
Use “D” pull handle on exit door (outswing system) where passage set / lock not required. Use flushbolts top and bottom to lock door from the inside only. Note: exit door not accessible from exterior.
INTERIOR
EXTERIOR
OUTSWING
INSWING
INTERIOR
EXTERIOR
3L
3LI
How To Determine Swing Of Systems
FB FB3L INTERIOR
EXTERIOR
outswing application “D” pull handle option
Use one “D” pull handle on each pair of inswing doors to pull open and close doors.
Inswing application “D” pull handle optionFB FB
5RI
INTERIOR
EXTERIOR
© Copyright 2018 • E clipse Architectural® 7ALL DRAWINGS NO SCALE
1x KTE2CPS pivot set2x KTE2CICS intermediate carrier set1x KTE2HS hinge set1x KTE22HHS half offset hinge set4x KTDB non-keyed flushbolt
2x KTE2CPS pivot set2x KTE2CICS intermediate carrier set1x KTE2CLCS left carrier set3x KTE22HHS half offset hinge set6x KTDB non-keyed flushbolt
1x KTE2CPS pivot set3x KTE2CICS intermediate carrier set2x KTE2HS hinge set1x KTE22HHS half offset hinge set6x KTDB non-keyed flushbolt
2x KTE2CPS pivot set2x KTE2CICS intermediate carrier set1x KTE2CRCS right carrier set2x KTE2HS hinge set1x KTE22HHS half offset hinge set6x KTDB non-keyed flushbolt
1x KTE2CPS pivot set3x KTE2CICS intermediate carrier set1x KTE2CLCS left carrier set2x KTE2HS hinge set2x KTE22HHS half offset hinge set8x KTDB non-keyed flushbolt
1x KTE2CPS pivot set1x KTE2CLCS left carrier set1x KTE2HS hinge set2x KTDB non-keyed flushbolt
2x KTE2CPS pivot set1x KTE2CLCS left carrier set1x KTE2HS hinge set2x KTDB non-keyed flushbolt
1x KTE2CPS pivot set1x KTE2CICS intermediate carrier set1x KTE22HHS half offset hinge set2x KTDB non-keyed flushbolt
2x KTE2CPS pivot set1x KTE2CICSintermediate carrier set1x KTE22HHS half offset hinge set4x KTDB non-keyed flushbolt
2x KTE2CPS pivot set1x KTE2CMCS meeting carrier set2x KTE2HS hinge set4x KTDB non-keyed flushbolt
2x KTE2CPS pivot set1x KTE2CICS intermediate carrier set1x KTE2CLCS left carrier set2x KTE22HHS half offset hinge set4x KTDB non-keyed flushbolt
1x KTE2CPS pivot set1x KTE2CICS intermediate carrier set1x KTE2CLCS left carrier set2x KTE22HHS half offset hinge set4x KTDB non-keyed flushbolt
2x KTE2CPS pivot set1x KTE2CICS intermediate carrier set1x KTE2CRCS right carrier set1x KTE2HS hinge set1x KTE22HHS half offset hinge set4x KTDB non-keyed flushbolt
MCS
RCS
RCS
LCS
LCS
MCS
LCS
LCS
LCS
LCS
HS
HS
HS
HS
HS
HS
HS
HS
HSHS
HS
PS
PS
PS
PS
PS PS
PS
PS PS
PS
PS PS
PS
PS PS
PS
PS
PS
PS
PS
HHS
HHS
HHS
HHS
HHS
HHS
HHS
HS
HHS
HHS HHS
HHS
HHSHHS
HHS
ICS
ICS
ICS
ICS
ICS
ICS
ICS ICS
ICS ICS
ICS
ICS
ICS ICS
ICS
ICS
ICS
WPS
DHESP
DH
DHESP
DH
DH
ESP
DH
DH
FB
FB
FB
FBFB
FB FB
FB FB
FB FB
FB FB
FB FB
FB FBFB
FB FBFB
FB FBFB
FB FBFB
1x KTE2CLCSleft carrier setPer pair of doors:
1x KTE2CRCSright carrier set1x KTE2HShinge set2x KTDBnon-keyed flushbolt
FB
DH
PASSAGESETLOCKBYOTHER
FLUSHBOLTSTOP&BOTTOM
TWINPOINTOPTIONTOFB
FLOATINGDOORPAIRS
ASTRAGAL
DOORHOLD
LEGEND
INTERIOR
EXTERIOR
4-5/16”
4”
EXTENDEDSTRIKEPLATEfor 1-3/4” Door Only
KT745ESPXsatin finishKT745ESPQbronze powder coat
HARDWARELEGENDPS Pivot setWPS Wall pivot setMCS Meeting carrier setICS Intermediate carrier setLCS Left carrier setRCS Right carrier setHHS Half offset hinge setHS Hinge set (flat)FB FlushboltESP Extended strike plateDH Door holdMAG MagnetTP Twinpoint
Thisconfigurationnotaccessiblefromexterior
Thisconfigurationnotaccessiblefromexterior
Thisconfigurationnotaccessiblefromexterior
Thisconfigurationnotaccessiblefromexterior
2R
1L2R
3R
1L3R
2L2R
1L4R
4R
2L3R
5R
3L4R
7R
2L5R
8R
INTERIOR
EXTERIOR
INTERIOR
EXTERIOR
INTERIOR
EXTERIOR
INTERIOR
EXTERIOR
INTERIOR
EXTERIOR
INTERIOR
EXTERIOR
INTERIOR
EXTERIOR
INTERIOR
EXTERIOR
INTERIOR
EXTERIOR
INTERIOR
EXTERIOR
INTERIOR
EXTERIOR
INTERIOR
EXTERIOR
INTERIOR
EXTERIOR
maybereversed
HHS
FB
intermediate carrier & guide set left carrier & guide setINTERIOR
EXTERIORpivot set
flushbolts flushbolts
half offset hinge set flat hinge setpassage set
pivot set
jamb doorjamb doorbasic door
leadingdoor
service door
door hold
3L2R Hardware Application
E2 HARDWARE LIST FOR DOOR CONFIGURATIONS Passage set/lock, flushbolt, astragal & hardware placement for outswing applications
From left to right
Adhesive black gasket for optimum sealing performance around all hinge flaps. Gasket compatible with E2 & E3 hinges.
neoprene black gasket
KTE3HGASKET
© Copyright 2018 • Eclipse Architectural®FULL SCALE EXCEPT AS NOTED8
ECLIPSE KT795 (8”) OUTSWING SILL SYSTEM FOR 1-3/4” (44.5MM) DOOR THICKNESS
New Generation Sill with Flushbolt Pin Channel, Compatible with E2 & E3 Systems.
Extrusion Alloy 6063 T5. Actual Full Sill Width: 8” (203mm) Channel Sill for Flushbolt or Twinpoint.
KT795E3FIRC Clear anodizedKT795E3FIRD Bronze anodized
KT78
0SPC
Prot
ectiv
e vi
nyl s
ill c
over
for s
ill n
ose
KT77
0SPC
Prot
ectiv
e vi
nyl s
ill c
over
for i
nter
ior f
ir to
p
EXTE
RIO
R
19/3
2”
(15m
m)
1-3/
16”
(30m
m)
wee
p ho
le
wee
p ho
les
2-5/
32”
(54m
m)
2-7/
32”
(57m
m) Fi
r top
WOODSUBSTRATE
3/8”
(9
.5m
m)
1-3
/4”
(44.
5mm
)
13/3
2” (1
0mm
)
8” (2
03m
m)
1/4”
(6m
m)
E2 b
otto
m
hing
e &
gui
de
6-9/
16”
(166
.7m
m)
jam
b lin
e
DS434
Kerf
seal
KT841
Redu
cer
KT795
Sill
KT795COVERBLVE
PVC
inse
rt, b
lack
6-9/
16”
(166
.7m
m)
jam
b lin
e
DS369A7145BL
Alum
inum
T-s
lot
extru
sion
with
gra
ypi
le in
sert
viny
l cha
nnel
inse
rt
Cent
re o
f top
trac
k to
ce
ntre
of b
otto
m c
hann
el
23/3
2” (1
8.5m
m)
DBOT
se
ries
Flus
hbol
t
Two
lock
ing
optio
ns: Tw
inpo
int
Sill is fabricated as shown by Eclipse Architectural
© Copyright 2018 • E clipse Architectural® FULL SCALE EXCEPT AS NOTED 9
New Generation Sill with Flushbolt Pin Channel, Compatible with E2 & E3 Systems.
1-3/
16”
(30m
m)
6-9/
16”
(167
mm
)
6-9/
16”
(166
.7m
m)
jam
b lin
eE2
bot
tom
hi
nge
& g
uide
19/3
2”
(15m
m)
13/3
2”(1
0mm
)1/
4” (6
mm
)
viny
l cha
nnel
inse
rt
wee
p ho
les
2-5/
32”
(54m
m)
FIRTOP
WOODSUBSTRATE
1-3
/4”
(44.
5mm
)
2-7/
32”
(57m
m)
KT775
Sill
KT841
Redu
cer
3/8”
(9
.5m
m)
DS434
Kerf
seal
KT795COVERBLVE
PVC
inse
rt, b
lack
6-9/
16”
(166
.7m
m)
jam
b lin
e
wee
p ho
le
Cent
re o
f top
trac
k to
cen
tre o
f bo
ttom
cha
nnel
23
/32”
(18.
5mm
)
DS369A7145BL
Alum
inum
T-s
lot
extru
sion
with
gra
ypi
le in
sert
Sill is fabricated as shown by Eclipse Architectural
Extrusion Alloy 6063 T5. Actual Full Sill Width: 6-9/16” (166.7mm) Channel Sill for Flushbolt or Twinpoint.
ECLIPSE KT775 (6-9/16”) OUTSWING SILL SYSTEM FOR 1-3/4” (44.5MM) DOOR THICKNESS
KT775E3FIRC Clear anodizedKT775E3FIRD Bronze anodized
KT77
0SPC
Prot
ectiv
e vi
nyl s
ill c
over
for i
nter
ior f
ir to
pKT
760S
PCPr
otec
tive
viny
l sill
cov
er fo
r sill
nos
e
EXTE
RIO
R
DBOT
ser
ies
Flus
hbol
t
Two
lock
ing
optio
ns: Tw
inpo
int
© Copyright 2018 • Eclipse Architectural®FULL SCALE EXCEPT AS NOTED10
E2™ JAMB FOR 1-3/4” (44.5MM) DOOR THICKNESSExterior E2 Folding Door, Outswing Application.
11/1
6”(1
7.5m
m)
1/8”
(3m
m)
1/8”
(3m
m)
11/1
6”(1
7.5m
m)
9/16
”(1
5mm
)
1-5/
8”(4
1mm
)
3/8”
(9.5
mm
)
4-3/
8”(1
10.6
mm
)
6-9/
16”
(167
mm
)
DS434
kerf
seal
inse
rt
CL
CL
CL
REF
REF
9/32
”(7
mm
)
Drop
bolt
mac
hini
ng
cent
ered
at s
tile
wid
th
with
ded
icat
ed ro
uter
bi
ts.
7/64
”(2
.5m
m)
R =
1/64
” (0
.5m
m)
7/64
” (2
.8m
m)
DS416
kerf
seal
inse
rt
9/16
”(1
4mm
)
1-7/
16”
(36m
m)
23/3
2” (1
8.5m
m)
Flus
hbol
t mac
hini
ng d
epth
:1)
KTDBSY
9/1
6” (1
4mm
)2)
KTDBOC
43/
64”
(17m
m)
3) KTDBOE
43/
64”
(17m
m)
4) KTDBOT
3/4
” (1
9mm
)
5/16
” (8
mm
)
5/16
”(8
mm
)
19/6
4”(7
.5m
m)
1-3/
4”(4
4.5m
m)
EXTE
RIO
R
Actu
al m
achi
ning
for f
lush
bolts
(fac
e pl
ate)
1-27
/64”
x 7
-7/8
” (3
6mm
x 2
00m
m)
1-27
/64”
x 1
5-3/
4” (3
6mm
x 4
00m
m)
1-27
/64”
x 2
3-5/
8” (3
6mm
x 6
00m
m)
1-27
/64”
x 3
9-3/
8” (3
6mm
x 1
000m
m)
Rout
er b
its a
re a
vaila
ble
© Copyright 2018 • E clipse Architectural® FULL SCALE EXCEPT AS NOTED 11
KT49 TOP TRACK FOR E2™ HEADER & 1-3/4” (44.5MM) DOOR THICKNESSExterior E2 Folding Door, KT49 Outswing Application Only. Channel Top Track for Flushbolt or Twinpoint.
New Generation Top Track with Flushbolt Pin Channel.
KT49C Clear anodizedKT49D Bronze anodized
EXTE
RIO
R
DS434
Kerf
seal
2-3/
16”
(56m
m)
2-7/
8”(7
3mm
)
6-9/
16”
(167
mm
)Ja
mb
line
6-9/
16”
(167
mm
)Ja
mb
line
1-3/
16”
(30.
5mm
)5-
3/8”
(136
.5m
m)
6-9/
16”
(167
mm
)
KT49
Top
track
1-5/
8” (4
1mm
)
11/1
6”(1
7.5m
m)
11/1
6”(1
7.5m
m)
1-1/
2”(3
8mm
)
Cent
re o
f top
trac
k to
cen
tre o
f bo
ttom
cha
nnel
23
/32”
(18.
5mm
)
KT795COVERBLVE
PVC
inse
rt, b
lack
DS7145270BL
Pile
wea
ther
seal
, bla
ck
© Copyright 2018 • Eclipse Architectural®FULL SCALE EXCEPT AS NOTED12
(24mm)15/16"
(22mm)
finished floor line
KT749drop bolt cup
Door height plus 3-1/4” (83mm)= R.O. (from finished floor line)door height plus 2-3/4” (70mm)= full jamb height
KT23CVor KT23DVfloor channel withPVC insert
cl
7/8"
(11mm)7/16"
(10mm)3/8"
(12.7mm)1/2"
(22mm)7/8" R.O.
(4.8mm)3/16"
minimum door thickness when using floor channel 1-3/8” (35mm)
2-1/4” (57mm)door thickness
INTERIOREXTERIOR
DS369dual door
bottom pile seals
KT23 OPTIONAL FLOOR CHANNEL APPLICATION FOR OUTSWING OR INSWING DOORSThis application is recommended for interior application, exterior non-rainfall weather conditions or undercover well protected doors2-1/4” (57mm) door, outswing application shown. Other door thickness may be used.
KT23D-RADIUS Floor channel radius bronze anodized with PVC insert, black 120” only (3048mm). Custom order, call for manufacturing time.
KT23DV Floor channel, bronze anodized with PVC insert, blackKT23BLVE PVC insert only, black
Lengths available: 111”, 147”, 183”, 222”, 294” (2.81m, 3.73m, 4.64m, 5.63m, 7.46m)
NOTE: Door height plus 4-1/4”: (107.9mm) = R.O. (from finished floor line to R.O. header) when using Eclipse frame specs.
KT788 E3 ADA LOWRISE ALUMINUM SILL FOR INSWING & OUTSWING DOORS
KT788E3D Bronze anodized only
ADA Compliant
EXTERIOR23/32”(18.5mm)
6-9/16” (166.7mm)
1/2”(12.7mm)
15/16”(23.6mm)
19/32”(15mm)
1-3/4”(44.45mm)
NO SCALE
drill round hole for pin
no flush bolt cup used
23/32”(18.5mm)
6-9/16” (166.7mm)
1/2”(12.7mm)15/16” (23.6mm)
finished floor line
19/32”(15mm)
KTDBSYFlush bolt
KT749flush bolt cup used,custom drilling required in sill
thermal break
1-3/4” (44.45mm) finished floor line
NO SCALE
Slopes of threshold may be ripped off to achieve flush sill application.
© Copyright 2018 • E clipse Architectural® FULL SCALE EXCEPT AS NOTED 13
JAMB TO SILL ASSEMBLY
screws
jamb
fir top moulding
inserts snap into channel
E2 or E3 sill extruded aluminum clear or bronze anodized, with wood substrate and interior top moulding (fir)
KT768GASKET sill to jamb assembly gasket (adhesive backed)
KT23BLVEPVC insert, black
KT795COVERBLVEPVC insert, black
KT190C WOOD ASTRAGAL DETAIL FOR ECLIPSE E2 INTERIOR FOLDING SYSTEMTriple Seal For Superior Sealing Performance
DS434 kerf seal
DS434kerf seal
1-5/16” (33.34mm)KT190Castragalsupplied by Eclipse Architectural
2134mm (84”)2438mm (96”)2743mm (108”)3048mm (120”)clear fir astragal 1-1/8”
(28.5mm)
DSP10835BLKerf inserted fin pile
9/32”(7.14mm)
9/32”(7.14mm)
1/8” (3.23mm)
1-3/4”(44.5mm)
door
kerf slot1/8” x 3/8”(3.18mm x 9.5mm)
DS434inserted weatherseal, brown, white or black
3/8” (9.5mm)
5/16” (7.94mm)
INTERIOR3º bevel on active door ie: 35-7/8” (911mm) inside measurementwidth of door.
36” (914.4mm) outsidemeasurement of door
5/32” (4mm)
INTERIOR
DSP10835BLKerf inserted fin pile
door with astragal
NOSCALE
1/8” (3.23mm)
NO SCALE
© Copyright 2018 • Eclipse Architectural®14 ALL DRAWINGS NO SCALE
E2™ Hardware Placement (4L) Configuration, Outswing Application
Interior Applications
How To Determine Swing of Systems:
Hall or Living Room Another Room
The following is a guideline when determining outswing or inswing applications for the purpose of choosing correct hardware and flushbolts. NOTE: The interior/exterior designation (i.e. 3L) is still used for interior application because it just makes it easier to understand.
For example:
The above example (3LI) shows the system swinging into the bedroom and flushbolts on the same side. This would be an inswing system and the bedroom side is considered the interior side. Passage set only recommended for the swing door.
The above example (3L) shows the system swinging into another room and flushbolts on the bedroom side. This would be an outswing system and the bedroom side is considered the interior side. Passage set only recommended for the swing door.
The above example (2L2R) is not recommended for interior applications because of the potential of getting locked in a room without any exit. Other configurations not recommended. 2L, 2R, 4L, 4R, 6L, 6R, 8L, 8R; basically pairs or even number or door panels.
EXTERIOR
Notaccessible
2L2RINTERIOR
INTERIOR
EXTERIOR
OUTSWING3L
(FLUSHBOLT) BEDROOM SIDE
INSWING
INTERIOR
EXTERIOR3L1
(FLUSHBOLT) BEDROOM SIDE
bottom pivot
wall pivot
hingeintermediate guide
hinge with
handle
end guide
end carrierintermediate carrier
weathersealtop pivot
Latching Door Hold (DH)
KT740DHC Clear anodized KT740DHD Bronze anodized
T-Unit
set screenadjustment screw
main unit
© Copyright 2018 • E clipse Architectural® 15ALL DRAWINGS NO SCALE
FLUSHBOLTS FOR E2 OUTSWING FOLDING DOORS: DBOT SERIES
SELECT FINISH PRODUCT NUMBER DESCRIPTION
bronze powder coat finish on aluminum
KTDBOT200NRQ 8” (200mm), 1” throw, round endKTDBOT400NRQ 16” (400mm), 1” throw, round endKTDBOT600NRQ 24” (600mm), 1” throw, round endKTDBOT1000NRQ 39” (1000mm), 1” throw, round end
brushed metallic finish on aluminum to match stainless steel
KTDBOT200NRX 8” (200mm), 1” throw, round endKTDBOT400NRX 16” (400mm), 1” throw, round endKTDBOT600NRX 24” (600mm), 1” throw, round endKTDBOT1000NRX 39” (1000mm), 1” throw, round end
bright gold finishon aluminum
KTDBOT200NRG 8” (200mm), 1” throw, round endKTDBOT400NRG 16” (400mm), 1” throw, round endKTDBOT600NRG 24” (600mm), 1” throw, round end
SPECIFICATIONSMax wind load: 450kg (990lb) forceMin door thickness: 1-3/4” (44.5mm)Throw length: 1” (25mm)Finishes: Bronze powder coat on aluminum to match pvd bronze finish on E3 hinges. Brushed metallic on aluminum to match stainless steel finish on E3 hinges. Bright gold (G) finish on aluminum to match pvd brass finish on E3 hinges.
The flush-mounted flushbolts, rounded style and 1” (25mm) throw are designed for use with sliding and folding doors. This flushbolt will resist high winds and is rated to resist a 250kg load in Western Red Cedar and 450kg in Amoora. The bolts are easily installed with a dedicated router bit and are available in three finishes.
PLEASE NOTE: Flushbolt housing & slide bar are manufactured from aluminum components
1” (25mm) throw length regardless of bolt length
INTERIOR
Architectural Detail
2-7/16” (62mm)
13/16” (20.6mm)
7/8”(22mm)
KTE2DBFORB Router bit for flushbolts (dedicated router bits are available)
Bright gold (G) finish is custom order, call for manufacturing time.
flushbolt machining centered at stile width
R = 1/64” (0.5mm)9/16” (14mm)
CL
1-27/64” (36mm)
1/8”(2.5mm)
3/4”(19mm)
KT749 Flushbolt cup used with floor channel and ADA sill
Flushbolt cup used with floor channel and ADA sillKT749BRONZE bronze powder coatKT749DCH Satin chrome
Bright gold (G) finish is custom order, call for manufacturing time.
Strike plate for headerKTDBSPQ bronze powder coat KTDBSPS Satin chrome
7-7/8” (200mm)15-3/4” (400mm)23-5/8” (600mm)39-3/8” (1000mm)
1-27/64”(36mm)
43/64” (17mm)
35/64” (14mm)
47/64” (18.6mm)
pin diameter 25/64” (10mm)
35/64” (14mm)
1” (25mm)
Flushbolt Assembly
Actual machining for flushbolts (face plate)1-27/64” x 7-7/8” (36mm x 200mm) 1-27/64” x 23-5/8” (36mm x 600mm)1-27/64” x 15-3/4” (36mm x 400mm) 1-27/64” x 39-3/8” (36mm x 1000mm)
© Copyright 2018 • Eclipse Architectural®16 ALL DRAWINGS NO SCALE
SELECT FINISH PRODUCT NUMBER DESCRIPTION
bright gold finishover aluminum
KTDBSY200NRG 8” (200mm), 1” throw, round endKTDBSY400NRG 16” (400mm) 1” throw, round endKTDBSY600NRG 24” (600mm) 1” throw, round end
powder coat finishbronze overaluminum
KTDBSY200NRQ 8” (200mm) 1” throw, round endKTDBSY400NRQ 16” (400mm) 1” throw, round endKTDBSY600NRQ 24” (600mm) 1” throw, round endKTDBSY1000NRQ 39” (1000mm) 1” throw, round end
brushed metallic finish over aluminum to match stainless steel
KTDBSY200NRX 8” (200mm) 1” throw, round endKTDBSY400NRX 16” (400mm) 1” throw, round endKTDBSY600NRX 24” (600mm) 1” throw, round endKTDBSY1000NRX 39” (1000mm) 1” throw, round end
SPECIFICATIONSMax wind load: 450kg (990lb) forceMin door thickness: 1-3/4” (44.5mm)Bolt lengths: 7-7/8” (200mm), 15-3/4” (400mm), 23-5/8” (600mm), 39-3/8” (1000mm)Finishes: Bright gold to match pvd brass hardware bronze powder coat on aluminum to match the pvd bronze hardware & brushed metallic to match stainless steel hardware
INTERIOR
Architectural Detail Flushbolt Assembly
2-7/16” (62mm)
13/16” (20.6mm)
7/8”(22mm)
flushbolt machining centered at stile width
R = 1/64” (0.5mm)9/16” (14mm)
CL
1-27/64” (36mm)
1/8”(2.5mm)
3/4”(19mm)
KT749 Flushbolt cup used with floor channel and ADA sill
PLEASE NOTE: Flushbolt housing & slide bar are manufactured from aluminum components
KTE2DBFORB Router bit for flushbolts (dedicated router bits are available)
Flushbolt cup used with floor channel and ADA sillKT749BRONZE bronze powder coatKT749DCH Satin chrome
Strike plate for headerKTDBSPQ bronze powder coat KTDBSPS Satin chrome
7-7/8” (200mm)15-3/4” (400mm)23-5/8” (600mm)39-3/8” (1000mm)
1-31/32”(50mm)
1-27/64”(36mm)
17/32”(13mm)
pin diameter9/16 (14mm)
1” (25mm)
The flush-mounted flushbolts, rounded style and 1” (25mm) throw are designed for use with sliding and folding doors. Symphony™ will resist high winds and is rated to resist a 250kg load in Western Red Cedar and 450kg in Amoora. The bolts are easily installed with a dedicated router bit and are available in three finishes.
Symphony™
FLUSHBOLTS FOR E2 OUTSWING FOLDING DOORS: DBSY SERIESUsed with KT788 ADA Sill and KT23 Floor Channel
Bright gold (G) finish is custom order, call for manufacturing time.
Actual machining for flushbolts (face plate)1-27/64” x 7-7/8” (36mm x 200mm) 1-27/64” x 23-5/8” (36mm x 600mm)1-27/64” x 15-3/4” (36mm x 400mm) 1-27/64” x 39-3/8” (36mm x 1000mm)
© Copyright 2018 • E clipse Architectural® 17ALL DRAWINGS NO SCALE
SELECT FINISH PRODUCT NUMBER DESCRIPTION
bright gold finishover aluminum
KTDBSY200NRG 8” (200mm), 1” throw, round endKTDBSY400NRG 16” (400mm) 1” throw, round endKTDBSY600NRG 24” (600mm) 1” throw, round end
powder coat finishbronze overaluminum
KTDBSY200NRQ 8” (200mm) 1” throw, round endKTDBSY400NRQ 16” (400mm) 1” throw, round endKTDBSY600NRQ 24” (600mm) 1” throw, round endKTDBSY1000NRQ 39” (1000mm) 1” throw, round end
brushed metallic finish over aluminum to match stainless steel
KTDBSY200NRX 8” (200mm) 1” throw, round endKTDBSY400NRX 16” (400mm) 1” throw, round endKTDBSY600NRX 24” (600mm) 1” throw, round endKTDBSY1000NRX 39” (1000mm) 1” throw, round end
NEW E2 SILLS WITH TWO LOCKING OPTIONS
Flushbolt
For 1-3/4” (44.5mm) Door Thickness
The New DBOT Series flushbolt & New LT2 Twinpoint lock were designed to utilize the same channel in both of the new E2 sills and the new E2 Top Track, thus giving you the option to now offer your customer the original flushbolt design or the simple hand rotation of the single handle, driving a 1” throw into the head and sill.
KT795 Sill
snap in covers for channels
Twinpoint
KT775 Sill
DBOT Series Flushbolt
LT2 Series Twinpoint
ECLIPSE TWINPOINT LOCK & SWING HANDLESpecifications
Function
Style
Testing
The LT2 operates easily with a simple handle rotation, driving a 1” (25mm) throw into the head and sill. This makes it one of the most secure bolt locks on the market. An installed Twinpoint system is completely accessible and serviceable.For people with mobility impairments, the Twinpoint offers the security of two flushbolts, but without the access problems associated with flushbolts being too high or low to reach, and hard-to-grip door handles.
LT2 has the sleek and clean styling synonymous with all Eclipse products. Their low profile allows any folding system, such as F3, E2, E3 or E4 to stack neatly, without intrusive door furniture getting in the way. Eclipse Twinpoint locks are fully concealed within the door stile, avoiding long or hard-to-reach dropbolts fixed to the door face, particularly on tall doors. The Eclipse Twinpoint is an unobtrusive, functional and sleek locking solution.
The Centor LT2 has been tested to 100,000 cycles at maximum configuration to ensure smooth working order beyond their 10 year warranty period. The LT2 Twinpoint locking system has also been exposed to dust, mud, sand and corrosive atmospheres to ensure they stand up to real life use. This includes exposure to salt spray for seaside installations.
Twinpoint assembly is used in securing each pair of folding panels in the closed position. Not used on the swing (active) panel.
Minimum door thickness: 1-3/8” (35 mm) / Minimum rod length: 15” (381 mm) / Throw length: 1” (25 mm) / Uses: folding, french & sliding
twinpoint & swing handle
twinpoint & swing handle
twinpoint & swing handle
multipoint &lever lock set
4L 3L
© Copyright 2018 • Eclipse Architectural®18 ALL DRAWINGS NO SCALE
LT2 TWINPOINT LOCK & DF3 (ALUMINUM) OR DF4 (STAINLESS STEEL) SWING HANDLESKit Components For Twinpoint Assembly
transmission rod
PLEASE NOTE: When ordering complete TwinPoint Assembly, you are required to order: transmission rod & cover plate, lock/gear box, swing handle & cups.
Twinpoint Lock assembly not available in PVD Brass (TG)
transmission rod
swing handle assembly(6 finishes)
lock/gear box
two finishes available on outer housing cover plate
PRODUCT # DESCRIPTION
EC TWINPOINT LOCK (LT2 MODEL) FOR USE WITH DF3 (ALUMINUM) & DF4 (STAINLESS STEEL) MODELSECLT2TRSN0924X TwinPoint transmission rod, cover plate and strike plate for 96” (2438mm) door height / brushed metallic aluminum finishECLT2TRSN0924Y TwinPoint transmission rod, cover plate and strike plate for 96” (2438mm) door height / black anodized finishECLT2TRSN0930X TwinPoint transmission rod, cover plate and strike plate for 120” (3048mm) door height / brushed metallic aluminum finishECLT2TRSN0930Y TwinPoint transmission rod, cover plate and strike plate for 120” (3048mm) door height / black anodized finish
EC LOCK GEAR BOX FOR EC TWINPOINT (LT2 MODEL)ECLT2NS Lock/gear box for EC TwinPoint transmission rod, cover plate & handle
EC SWING HANDLE DF3 (ALUMINUM) MODEL FOR EC TWINPOINT (LT2 MODEL)ECDF3SHNAL DF3 swing handle aluminum, black powder coatECDF3SHNAPCN DF3 swing handle aluminum, satin aluminum powder coatECDF3SHNAQ DF3 swing handle aluminum, bronze powder coat
EC SWING HANDLE DF4 (STAINLESS STEEL) MODEL FOR EC TWINPOINT (LT2 MODEL)ECDF4SHNSOL DF4 swing handle stainless steel, PVD bronze finishECDF4SHNSS DF4 swing handle stainless steel, brushed finish
CUP FOR SILL OR HEAD (MANDATORY FOR SILL, OPTIONAL FOR HEAD)ECLTBC8SS Brushed S.S. FinishECLTBC8SOL PVD Bronze Finish
TL2 ROUTER BITECLT2RB Router bit for LT2 TwinPoint Lock Assembly
ECLIPSE E3 DRILLING JIG FOR E3 HINGE PLACEMENT ON DOORKTE3DJ Eclipse E3 drilling jig for wood doors
STRIKE PLATE FOR HEAD (for replacement purposes only) ONE STRIKE SUPPLIED WITH TWINPOINT (STANDARD)
ECLTSP8SS Brushed S.S. FinishECLTSP8OL PVD Bronze Finish
© Copyright 2018 • E clipse Architectural® 19ALL DRAWINGS NO SCALE
LT2 TWINPOINT
LT2 Model twinpoint lock
DF3 model twinpoint swing handle (aluminum) orDF4 model twinpoint swing handle (stainless steel)
E2 top track
1-1/16”(27mm)
4-23/32”(120mm)
15-3/4”(400mm)
1-3/4”(44.5mm)
4-23/32”(120mm)
1” (25mm)
Standard = 36” (914mm)Minimum = 15” (381mm)
E2 or E3 floor channel used with twinpoint
New E2 or E3 Sill used in conjunction with Twinpoint
Twinpoint assembly is used in securing each pair of folding panels in the closed position. Not used on the swing (active) panel.
Twinpoint & Swing Handle
Twinpoint & Swing Handle
Twinpoint & Swing Handle
Multipoint &Lever Lock Set
4L 3L
© Copyright 2018 • Eclipse Architectural®20 ALL DRAWINGS NO SCALE
WOOD STILE ROUTE PROFILE (OUTSWING APPLICATION) FOR LT2 MODEL
60.0°
9/32” (7.1mm)
5/64” (1.8mm)
Detail A
ECLT2RB Route stile
1-3/4” (44.5mm)
1-3/32”(27.80mm)
32/23”(18.4mm)
1/2”(12.7mm)
5/32”(4mm)
3/32”(2.5mm)
9/16”(14.4mm)
2-1/8”(54mm)
14-11/64”(360mm)
9-1/16” (230.2mm)
R 1/2”(12.7mm)
2-5/64” (53mm)
11/16” (18mm)
standard height9/14”
(36mm)
B
A
A
1-7/64” (28mm)
15/32” (12mm)
1-1/32”(26mm)
R7 9/32”(7.2mm)
3-3/16”(81mm)
4-61/64”(126mm)
13/64”(5mm)
Detail A
Back Set
min 1-3/8” (35mm)
© Copyright 2018 • E clipse Architectural® 21ALL DRAWINGS NO SCALE
1-11/16”(43mm)
R 13/32”(10.5mm)
13/16”(21mm)
11/64” (4.2mm)
21/64” (8.4mm)
1-3/4” (44.5mm)
19/64” (7.6mm)
E2 / E3 HINGE PLACEMENT OVER TWINPOINT
A A
5/32" (4mm)1-3/32" (27.8mm)
9/16"(14.4mm)
1-3/4" (44.5mm)
SECTION A-A
E2 Hinge
E3 hinge
Strike plate for head
Flushbolt cup used with floor channel
ECLTSP8SS Brushed s.s. finishECLTSP8OL PVD bronze finish
ECLTBC8SS Brushed s.s. finishECLTBC8SOL PVD bronze finish
2-13/32”(61mm)
TWINPOINT HINGE OFFSET THICKNESS OF DOOR PANEL PROGRAM
5/32” (4mm) 1-3/4” (44.45mm) E2, E3, F2, F3
7/16” (11mm) 2-1/4” (57.15mm) E4
© Copyright 2018 • Eclipse Architectural®22 ALL DRAWINGS NO SCALE
DF3 TwinPoint Swing Handle, Choice of 4 Finishes Over Cast Aluminum
LT2 TwinPoint Housing Cover Plate Finishes
LT2 Transmission HousingBrushed Metallic Aluminum or
Black Anodized finish
Swing HandleDF3: Aluminum handle (4 finishes)DF4: Stainless Steel Handle (2 finishes)
Finishes & MaterialsThe Twinpoint door furniture is available in a range of finishes to suit any door or décor.
Brushed Metallic Aluminum Black Anodized Aluminum
Satin Aluminum Powder Coat Black Powder Coat Bronze Powder Coat
DF4 Twinpoint Swing Handle (SS) Choice of 2 Finishes
PVD bronze over stainless steel
Brushed stainless steel
PLEASE NOTE: For technical reasons associated with color reproduction, the colors shown on this brochure give only an indication of color & finish. No warranty or guarantee can be given that they will exactly match the product as supplied.
Twinpoint assembly is used in securing each pair of folding panels in the closed position. Not used on the swing (active) panel.
twinpoint & swing handle
twinpoint & swing handle
twinpoint & swing handle
multipoint &lever lock set
4L
3L
Twinpoint Lock assembly not available in PVD Brass (TG)
LT2 Model Twinpoint
© Copyright 2018 • E clipse Architectural® 23ALL DRAWINGS NO SCALE
FLUSHBOLT PLACEMENT
MANUAL DOOR CALC
Suggested flushbolt lengths for door heights 80” to 108” (2.032m to 2.74m)
NOTE: End user may require longer flushbolts for top of doors for easier reach. When using E2 hardware for folding windows, top flushbolt length must be specified.
MAGNETSKTEMAG “Magnets” for holding the door panels in the open position
Pivot door to jamb 9/32” (7mm)Swing door to jamb 9/32” (7mm)Panel to panel gap 5/32” (4mm)Bottom of door panel to sill 3/8” (9.5mm)Top of door panel to header 3/16” (5mm)Inside face of door panel to stop 3/8” (9.5 mm)
1. Door Height plus 4-3/8” (111mm) = R.O. when using outswing E2 Sills and Frame specs.
2. Door Height plus 3-13/16” (97mm) = R.O. from finished floor line when using KT788E2 ADA Sill
3. Door Height plus 3-1/4” (83mm) = R.O. from finished floor line when using E2 floor channel.
Clearances Rough Opening Specs For E2
Manual calculation for determining R.O. (i.e. Configuration 1L3 R, i.e. Door panel size 36" x 84" [914mm x 2134mm])
Width1) Jamb to Stud - typical 1/4" (6mm) shimming x 2 = .5" (12mm)2) Jamb thickness 11/16" (17.5mm) x 2 = 1.375" (34.9mm)3) Panel to Jamb - Clearance 9/32" (7mm) x 2 = .5624" (14mm)4) Panel to Panel - Gap 5/32" (4mm) x 3 = .4686" (12mm) 5) Panel width 36" (914”) x 4 = 144" (3656mm)
Height 6) Frame header to R.O. header. Typical 1/2” (12mm) shimming x 1 = .5” (12mm) 7) Frame header 2-3/16” (56mm) x 1 = 2.1875” (56mm) 8) Top of door panel to frame header 3/16” (5mm) x 1 = .1875” (5mm) 9) Door panel height 84” (2134mm) x 1 = 84” (2134mm)10) Bottom of door panel to top of sill 3/8” (10mm) x 1 = .375” (10mm)11) Sill height 1-3/16” (30.16mm) x 1 = 1.1875 (30.16mm)
R.O. (width) 146-29/32" or 146.906” or (3731mm) or (3.73m)
R.O. Height 88-7/16” or 88.4375” or (2246mm) or (2.24m)
For O.S.M. width of unit take R.O. minus 1/2"(12mm) i.e. 146 29/32"(3731mm) -1/2"(12mm) = 146 13/32" (3718mm).
For O.S.M. height of unit take R.O. minus 1/2”(12mm). i.e. 88-7/16” (2246mm) minus 1/2” (12mm) = 87-15/16” (2234mm).
1L3R
R.O.
INTERIOR
EXTERIOR
3
2 2
31 15 5 5 5
4 4 4
R.O.
EXTERIOR INTERIOR
6
87
9
1011
up to 84”(2134mm)
84-1/16”to 96”(2159mmto 2438mm)
96-1/2” to 108” (2403mmto 2743mm)
108-1/16”to 118”(2768mm to2997mm)
8” (200mm)flushbolt
16” (400mm)flushbolt
24” (600mm)flushbolt
39” (1000mm)flushbolt
8” (200mm)flushbolt
8” (200mm)flushbolt
8” (200mm)flushbolt
8” (200mm)flushbolt
KTEMAG (sold as pairs)
13/16”(20.6mm)2-3/8”
(60.3mm)
I.E. 5L
door hold
magnets
3L
© Copyright 2018 • Eclipse Architectural®24 ALL DRAWINGS NO SCALE
KTE2CPSS pivot set, stainless steelKTE2CPSOL pivot set, bronze powder coatKTE2CPSTG pivot set, PVD brass (TG)
KTE3WPSS wall pivot set, stainless steelKTE3WPSOL wall pivot set, bronze powder coatKTE3WPSTG wall pivot set, PVD brass
KTE2CLCSS left hand carrier set, stainless steelKTE2CLCSOL left hand carrier set, bronze powder coatKTE2CLCSTG left hand carrier set, PVD brass
KTE2CRCSS right hand carrier set, stainless steelKTE2CRCSOL right hand carrier set, bronze powder coatKTE2CRCSTG right hand carrier set, PVD brass
KTE2CMCSS meeting carrier set, stainless steelKTE2CMCSOL meeting carrier set, bronze powder coatKTE2CMCTG meeting carrier set, PVD brass
E2 HARDWARE SELECTION
PIVOT SET
WALL PIVOT SETS
RIGHT CARRIER SET
LEFT CARRIER SET
MEETING CARRIER SET
PRODUCT # DESCRIPTION
PRODUCT # DESCRIPTION
PRODUCT # DESCRIPTION
PRODUCT # DESCRIPTION
PRODUCT # DESCRIPTION
PARTS ON PANELS
PARTS ON PANELS
PARTS ON PANELS
PARTS ON PANELS
PARTS ON PANELS
2L2R & 4L4R Application
(PVD Brass is custom order, 9-12 week delivery time)
(PVD Brass is custom order, 9-12 week delivery time)
(PVD Brass is custom order, 9-12 week delivery time)
(PVD Brass is custom order, 9-12 week delivery time)
(PVD Brass is custom order, 9-12 week delivery time)
© Copyright 2018 • E clipse Architectural® 25ALL DRAWINGS NO SCALE
KTE22HSS hinge set, stainless steel KTE22HSOL hinge set, bronze p.cKTE22HSTG hinge set, PVD brass
KTE22HHSS half offset hinge set, stainless steelKTE22HHSOL half offset hinge set, bronze p.c.KTE22HHSTG half offset hinge set, PVD brass
KTE2CICSS intermediate carrier set, stainless steelKTE2CICSOL intermediate carrier set, bronze powder coatKTE2CICSTG intermediate carrier set, PVD brass
E2 HARDWARE SELECTION
INTERMEDIATE CARRIER & GUIDE SETS
HALF OFFSET HINGE SETS (WITH HANDLE)
SINGLE SETS (WITH HANDLE)
PRODUCT # DESCRIPTION
PRODUCT # DESCRIPTION
PRODUCT # DESCRIPTION
PARTS ON PANELS
PARTS ON PANELS
PARTS ON PANELS
(PVD Brass is custom order, 9-12 week delivery time)
(PVD Brass is custom order, 9-12 week delivery time)
(PVD Brass is custom order, 9-12 week delivery time)
KTDCAS Satin Aluminum Finish KTDCAOL Black Finish KTDCATG Brass Finish
Door Hold Magnets (optional)
© Copyright 2018 • Eclipse Architectural®26
E2i internal bifold system without a bottom sill or floor channel is based on Eclipse’s standard E2 hardware system and uses Centor’s proven bifold window technology. For interior applications only, it is designed for seamless transitions between rooms and interior spaces. All the benefits of the versatile E2 system are preserved.
E2i features include:• Laterally adjustable bottom pivot• All stainless steel construction• No need for costly tile and concrete cutting• Complete horizontal and vertical adjustment
(No Sill Or Floor Channel Required)
E2I INTERIOR FOLDING DOOR HARDWARE SYSTEM
EXTERIOR FOLDING DOOR SYSTEMS
E2i
© Copyright 2018 • E clipse Architectural® 27ALL DRAWINGS NO SCALE
E2I SPECIFICATIONS
Max opening 24’ (7.3m)
Max panel weight 90lb (40kg) per panel
Max panel height 96” (2438mm)
Max panel width 36” (914mm)
Min panel thickness 1-3/8” (35mm)
Max number of panels 8 (4 each direction)
E2i internal bifold system without a bottom sill or floor channel is based on Eclipse’s standard E2 hardware system and uses Centor’s proven bifold window technology. For interior applications only, it is designed for seamless transitions between rooms and interior spaces. All the benefits of the versatile E2 system are preserved.
E2i features include:• Laterally adjustable bottom pivot• All stainless steel construction• No need for costly tile and concrete cutting• Complete horizontal and vertical adjustment
Weathersealing (optional)
No sill or floor channel
DS434 Weatherseal for sill, jamb and header. Black, brown or white
DS416 Weatherseal for between doors. Black, brown or white
DS369A7145BL Aluminum T-slot extrusion with black pile insert, for bottom of doors
DS415BL Black DS415W White weatherseal for between doors, use on clad doors where kerf slot is not possible
© Copyright 2018 • Eclipse Architectural®28 ALL DRAWINGS NO SCALE
panel width
panel thickness
21/32” (16.7mm)
19/32” (15mm)hinge offset
19/32” (15mm) panel offset
KTE2I TOP VIEW
KTE2IBPPSS
KTE2IBPICSS
KTE2IBPECSS
pivot set s.s.
intermediate carrier set s.s.
end carrier set s.s.
KTDBSY200NRX 8”KTDBSY400NRX 16”KTDBSY600NRX 24”
KTE2IBPMCSS Meeting carrier sets s.s. (not shown) Used in configurations as follows:
4L4R
2L2R
Flushbolts
flushbolt
flushbolt at bottom (optional)
flushbolt at bottom (optional)no sill or floor
channel required
flushbolt
jamb mounted bottom pivot
jamb mounted
gasketing between panels
(Refer to E2 Full Line Catalogue for flushbolt machining details)
© Copyright 2018 • E clipse Architectural® 29ALL DRAWINGS NO SCALE
E2I ARCHITECTURAL DETAIL
9/32”(7.5mm)
9/32”(7.5mm)
9/32”(7.5mm)jambclearance
9/32”(7.5mm)jambclearance
5/32”(4mm)
5/32”(4mm)
5/32”(4mm)
9/32” (7mm)jamb clearance
5/32” (4mm)hinge allowance
5/32” (4mm)hinge allowance
5/32” (4mm)hinge allowance
9/32” (7mm)jamb clearance
E2i only available for the following configurations
4L4R
4R
2L2R
2R
4L
2L
© Copyright 2018 • Eclipse Architectural®30 ALL DRAWINGS NO SCALE
panel thickness minus5/32” (3.8mm)
9/32” (7.5mm)panel to head clearance
3/16” (5mm) to face of door
9/32” (7.5mm) panel to sill clearance
2-3/8” (60mm)
19/32” (15mm)
1-3/8” (35mm)
1-1/2 (38mm)
KTE2I CROSS SECTION
© Copyright 2018 • E clipse Architectural® 31ALL DRAWINGS NO SCALE
E2I COMPONENTS • Only one finish available for the KTE2i Hinges: Brushed Stainless Steel
KTE2IBPPSS KTE2IBPICSS
KTE2IBPECSS KTE2IBPMCSS
KTE2HSS KTE22HHSS
Pivot set, brushedstainless steel
Intermediate carrier set, brushed stainless steel
End carrier set, brushed stainless steel
Meeting carrier set, brushed stainless steel
Hinge set (flat), brushed stainless steel
Hinge set (offset), brushed stainless steel
TOP TRACK
KT41C clear anodizedKT41D bronze anodized
FLUSHBOLTS
Round end, Symphony style 1” (25.4mm) throw length.
Finishes: Bright gold to match pvd brass hardware bronze powder coat on aluminum to match the pvd bronze hardware & brushed metallic to match stainless steel hardware
7-7/8” (200mm)15-3/4” (400mm)23-5/8” (600mm)39-3/8” (1000mm)
1-27/64”(36mm)
1” (25mm)
Head Office & Manufacturing Centre, Vancouver, Canada7470 Buller Avenue, Burnaby, B.C. V5J 4S5 CanadaPhone: (604) 451-1080 • Fax: (604) 451-1140 • [email protected] Vancouver, B.C., please use our toll free numbers: Phone: 1-888-520-9009 Fax: 1-800-567-2887
Branch Office & Distribution Centre, Toronto, CanadaPhone head office toll free 1-888-520-9009 for branch address
Branch Office & Distribution Centre, Los Angeles, CaliforniaPhone head office toll free 1-888-520-9009 for branch address
Eclipse Architectural® Corporate ShowroomsVancouver & Toronto, Canada • Los Angeles, California, USA
Exterior Folding Door Systems