ext. psu specification for approval€¦ · add the pse logo on the label and information under...

Ideal Power LtdIdeal Power, Ideal House, Tree Beech Enterprise Park, Gunn, Barnstaple, Devon, EX32 7NZ, England, UK Tel: +44 (0) 845 260 3400 Email: [email protected] Web: www.idealpower.co.uk

Ideal Power Ltd Product Specification Document

DATE:

I.T.E. POWER SUPPLY

PART NO:

070395-0323DESIGNED NO:

MODEL NO:

DESCRIPTION:

CUSTOMER:

FEB.09th.2014

REV: (B0)

HK-CP12-A12 HKSC-070395EP

CUSTOMER APPROVED SIGNATURES VENDOR APPROVED SIGNATURES

田青松

經理2014.02.09

歐陽建瓊

2014.02.09工程師

何寶玲

繪圖員2014.02.09

SPECIFICATION FOR APPROVAL

Web: www.idealpower.co.uk email: [email protected] TEL +44 (0) 845 2603400 Fax +44 (0) 845 2603401

Ideal Power, 14 Larks Way, Tree Beech Enterprise Park, Gunn, Barnstaple, Devon, England EX32 7NZ

Description Ext. PSU

Model Number 25HK-CP12-A12

Revision B0

Notes -


修改英規頭直接裝在整流器上

Ideal Power

汪韋變更：能效等級改為五等級製作,并將承認書更新為最新版.11.06.09A1

HK-CP12-A12 (B0)CUSTOMER

DATEREV

QR-工-26A

SPECIFICATION CHANGE HISTORY

DESCRIPTION REMARKS

PART NO

REVMODEL NO

STRUCTURALELECTRICAL

ENGINEER APPROVAL:SAFETY APPROVAL:

張偉松胡鵬歐陽建瓊

HKSC-070395EP

07.06.16A2

陶月花

13.10.10A3 馮丹2.更新FCC Logo (Update new FCC logo)1.更新新的IP logo（Update the new logo ）.

馮丹A4 13.10.23

(Please add RCM logo on label) 3.銘板增加RCM安規logoAdd the PSE logo on the label and information under Point 15.0 SAFETY

P/N: 25HK-CP12-A12 & also the RoHS label)1.在白盒上蓋加印客戶P/N 和 RoHS(Add Individual Cartons Label 1:

2.銘板增加PSE安規,承認書第15項增加PSE安規信息

14.02.09B0

變更:1.更新EMC標準和加法文警告標語. (update EMC standard and French warning words) 2.更新銘板上的安規logo.(Update the safety logo on the label) 3.更新8PIN頭.(Update the 8 way connector to the new type)

何寶玲

Page 2 of 13


11. PROTECTION10. INSULATION RESISTANCE9. DIELECTRIC STRENGTH (Hi-Pot) TEST

14. RELIABILITY AND QUALITY CONTROL15. SAFETY16. OVERALL DRAWING

19. MARKING18. PACKING

12. ENVIRONMENTAL CONDITIONS13. EMI/ EMC

1. INTRODUCTION2. INPUT REQUIREMENTS

5. LINE REGULATION6.HOLD UP TIME7.TURN ON TIME8.TEMPERATURE COEFFICIENT

3. OUTPUT REQUIREMENTS4. EFFICIENCY

DESCRIPTION : I.T.E. POWER SUPPLY

MODEL NO. :PART NO. :

CONTENTS

2014.02.09REV: (B0)

PAGE NO. :ISSUED DATE:

17. USE SPECIFICATION

1 OF 12

20. TEST REPORT

HKSC-070395EP

HK-CP12-A12

Ideal Power, 14 Larks Way, Tree Beech Enterprise Park, Gunn, Barnstaple, Devon, England EX32 7NZWeb: www.idealpower.co.uk email: [email protected] TEL +44 (0) 845 2603400 Fax +44 (0) 845 2603401

Page 3 of 13


This document specifies a switching power supply with a output of +12V, and electronic process. The switching power supply will provide power for technology equipments including electrical business equipment.The adaptor meets the requirement of lead free and RoHS.

PAGE NO. :

REV: (B0)ISSUED DATE:

3.3 Output Load Range: 0~1.0A

3.2 Output Regulation:

3.1 Output Voltage:

3.0 OUTPUT REQUIREMENTS

+12V

11.4V~12.6V

PART NO. :MODEL NO. :


1.0 INTRODUCTION

2014.02.092 OF 12HK-CP12-A12

HKSC-070395EP

2.3 Input In-rush Current: 50A Max

2.0 INPUT REQUIREMENTS

2.4 Input Current: 0.8A Max

2.3 Input Power Consumption at no-load : 0.3W Max

2.1 Input Voltage Range: 100(-10%)VAC to 240(+10%)VAC 2.2 Input Frequency Range: 47 Hz to 63 Hz

3.4 Output Ripple & Noise: 120mV Max @20MHz bandwidth with

22UF/50V capacitance and 104/50V ceramic capacitor.

5.0 LINE REGULATION: ± 2% maximum

6.0 HOLD UP TIME: 10ms Min at 110VAC full load.

4.0 EFFICIENCY: @average of 25/50/75/100% loads 115&230VAC input77.85%≧

7.0 TURN ON TIME: 2S Max at 110VAC full load.


Page 4 of 13


11.2.3 Over Voltage Protection: 11.2.2 Short Circuit Protection: Auto Recovery.

11.2 Output Protection

1V±15V

11.2.1 Output Current:

The switching power supply has a 1 Amps inner current fuse to protect itself.

PAGE NO. :

REV: (B0)ISSUED DATE:

11.1 Input Protection

11.0 PROTECTION

10.0 INSULATION RESISTANCE

9.0 DIELECTRIC STRENGTH (Hi-Pot) TEST

Primary to secondary: 50MOHM to 500VDC.

8.0 TEMPERATURE COEFFICIENT: 0.05%/°C

MODEL NO. :PART NO. :DESCRIPTION : I.T.E. POWER SUPPLY

2014.02.093 OF 12HK-CP12-A12

HKSC-070395EP

overload shall provide automatic recovery for the output voltage. Overload conditions shall decrease the output current. Removal of an output

production test.

Primary to Secondary : AC 3.0 KVrms, 4mA, 1 minute for type, 2 second for


Page 5 of 13


The burn-in test will be performed at least 2 hours at 40 centigrade degrees

The switching power supply has approved by the following safety standards:

When the operation is compling with this specification, the switching powersupply s MTBF will be 50,000 hours at 25 centigrade degrees.

The switching power supply has approved by the following standards:

The switching power supply can withstand the following environmental conditions:

ISSUED DATE:REV: (B0)

PAGE NO. :

14.1 Burn-in

under full load condition. 14.2 MTBF

15.0 SAFETY

13.0 EMI / EMC

Relative Humidity: 10% ~ 95%

Relative Humidity: 10%~95%

12.1 Storage Temperature:-20℃ ~ +70 ℃

12.2 Operation

14.0 RELIABILITY AND QUALITY CONTROL

Temperature:0°C~40°C

12.0 ENVIRONMENTAL CONDITIONS

DESCRIPTION : I.T.E. POWER SUPPLYPART NO. :MODEL NO. :

2014.02.09

FCC PART 15B AS/NZS 55022/55024

4 OF 12HK-CP12-A12

HKSC-070395EP

IEC61000-4-6. IEC61000-4-8. IEC61000-4-11.) (2)EN55024(IEC61000-4-2. IEC61000-4-3. IEC61000-4-4. IEC61000-4-5.

(1)EN55022(EN61000-3-2. EN61000-3-3)


J55022(H22)

UL60950-1 2nd Edition ,2007-03-27 CSA C22.2 NO.60950-1-07,2nd Edition.2007-03 EN60950-1: 2006+A11+A1+A12AS/NZS 60950-1:2003 +A1+A2+A3.

Page 6 of 13


77±1

AWG#

22

印安規字

35-J

6.0FT MIN

37±1

UNIT: mm

46.5±1


16. OVERALL DRAWING


REV: (B0)2014.02.09


2.3±

0.2

1.8

1.6±

0.1*

41.

7±0.

1*3

11.4±0.3

10.6±0.2

6.8±0.3

3±0.

2

35-J

2.0

20±1

1.4±0.1

9.5±

0.3 11.4

6.6±

0.3

8.0±0.3

0.51.6

未注標尺寸公差:±0.2

未注標尺寸公差:±0.2

5 OF 12

Date Code

HK-CP12-A12

HKSC-070395EP

(白色條紋)(印安規字)

可換頭

TIP

TIP

11.9±0.51.2*3

2.1±

0.2

16.8

±0.5

10±0.5

27.3

±0.2

TIP

1.61.5*3

8.1±0.3

10.5±0.5

4.9±0.3

year

M M Y Y C

month

made in China by Hon-kwang

M M Y Y C


Page 7 of 13


REV: (B0)


DESCRIPTION : I.T.E. POWER SUPPLYPART NO. :MODEL NO. :

2014.02.096 OF 12HK-CP12-A12

HKSC-070395EP

37±1

2.5A 250V~N20286HK-04

UNIT: mmUNIT: mm

HON-KWANGHK-02

2.5A250V~

HK-01E246753

2.5A125V~

37±1

77±1

46.5±1 37±1

HK-03

2.5A125V~EN 60320-1

HON-KWANG

46.5±1

77±1

37±1

B46A

P SE

UK SAA

TUVUL

M M Y Y C M M Y Y C

M M Y Y C M M Y Y C


Page 8 of 13


UNIT: mmUNIT: mm

7 OF 122014.02.09

MODEL NO. :PART NO. :DESCRIPTION : I.T.E. POWER SUPPLY

ISSUED DATE:PAGE NO. :

REV: (B0)TI

P 27.3

±0.2

8.1±0.3

10±0.5

8.1±0.3 8.1±0.3 8.1±0.3

HK-CP12-A12

HKSC-070395EP


TIP

27.3

±0.2

TIP27

.3±0

.2

TIP

TIP 27

.3±0

.2

27.3

±0.2

TIP

TIP

TIP

TIP

8.1±0.3

Page 9 of 13




REV: (B0)2014.02.09


8 OF 12

Please don't insert article alone at the wall.

WARNING!17. USE SPECIFICATION

TIP

TIP

TIP

TIP

HK-CP12-A12

HKSC-070395EP

BA

46


∅1.7

∅4.0∅4.75

∅1.7 ∅1.3

∅3.4

∅2.5

∅5.5 ∅5.5

∅2.1

∅5.5

∅2.1

TIP

TIP

TIP

TIP

∅6.3

∅3.0 ∅0.7

∅2.35

Instruction manual card

Page 10 of 13


2014.02.09REV: (B0)DESCRIPTION : I.T.E. POWER SUPPLY



9 OF 12HK-CP12-A12

HKSC-070395EP

18.1 Inner Box

UNIT: mm

18. PACKING

Width: 70

Height: 60

Length: 143

NOTICE:Its probably different from the white box of the sample and the figure dimension. The white box is used to pack during product.注意:樣品使用的小白盒尺寸可能與此圖面尺寸不同,此圖面尺寸是用于生產時的包裝.


Label: 1

Label: 2

RoHS24

6

Material:A卡400磅(0.53t)White

印刷于此

Open Side

Height

Length

Width

Label: 2Label: 1

P/N:25HK-CP12-A12 24

6

Page 11 of 13


(Transverse Plane)

440

250

360

18.2 Carton

UNIT: mm

100V~240V

200V~240V

100V~120V

MODEL:

N.W.:

G.W.:

Q'TY: 60PCS

100V~120V

100V~240V

200V~240V


MODEL NO. :

18. PACKING

PART NO. :PAGE NO. :ISSUED DATE:REV: (B0)

2014.02.0910 OF 12HK-CP12-A12

HKSC-070395EP


Page 12 of 13


19. MARKING

UNIT: mm



PAGE NO. :

REV: (B0)ISSUED DATE: 2014.02.09

11 OF 12HK-CP12-A12

HKSC-070395EP


200# CPC 合成紙+上光 NAME-PLATE:WHITE CHARACTERS BLACK BACKGROUND.

ID 0000019930

Sicherheitgeprufte

TUVRheinlandR

www.tuv.com

P SE

JET

入力: 12V 1.0A出力:

輸入事業者

100V 50/60Hz 0.35A 28VA

I.T.E. POWER SUPPLY

31.8+0.0-0.2

MADE IN CHINA

LPS: HK-CP12-A12: 12V 0~1.0A (SET AT 1.0A): 100-240V 50/60Hz 0.35A

60YM E202402MODELSEC.PRI.

17+0.0-0.2

R2.0

ĽINTÉRIEUR SEULEMENTPOUR UTILISATION À ATTENTION

Page 13 of 13

ext. psu specification for approval€¦ · add the pse logo on the label and information under...

Documents